有益菌根真菌及其互作对带叶兜兰试管苗生理生长的影响

为探讨菌根真菌的互作效应,筛选协同互作模式组合,对从野生兜兰新鲜营养根中分离、筛选出的3种菌根真菌（PF02、PF06和PF07）,采用单菌接种、双菌混合接种和三菌混合菌种等7种接种方式,开展菌−苗共生培养,筛选出优势菌株PF02和PF07,揭示在实验室环境下接菌方式与接种效应之间的相互联系,分析菌根真菌互作对带叶兜兰植株生长和生理的影响。结果表明：显示菌根真菌互作对宿主植株的生物量、保护酶活性及叶绿素总量具有较好的正向效应。3种双菌混合接种方式PF02−PF06、PF02−PF07及PF06−PF07均能有效促进带叶兜兰生物量增长,尤其是PF02−PF06接种方式,抗氧化酶POD、超氧化物歧化酶SOD、过氧化氢酶CAT活性及叶绿素总量提高显著。选择优化的接种方式,以及能够协同促进、达到共生平衡的最佳接种方式组合,最大限度发挥菌根对宿主植物的益生作用。     

Effects of nitrogen and water stress on the rehydration,endogenous hormonal regulation and yield of maize

Water scarcity is known to be a strong limiting factor affecting maize grown and yield in cold semi-arid regions. Numerous studies have shown that rehydration improves maize growth. Our study aimed to explore the effects of rehydration treatments on maize growth and yield under water and nitrogen stress during different growth stages. We selected the drought-tolerant maize variety Nendan 19 (ND19) and subjected it to water stress during the V6 (sixth-leaf), R2 (filling) and R6 (maturity) growth stages and a rehydration treatment after each stress stage. Our results indicated that N1 (N100 kg N ha⁻¹) and N3 (N300 kg N ha⁻¹) treatments significantly increased the leaf moisture status relative to water content (RWC), bound water content (BWC), free water content (FWC) and water potential (WP)) at different growth stages. Similar trends were observed in the accumulation of plant leaf and root hormones (zeatin+zeatin riboside, indole-3-acetic acid, abscisic acid and gibberellic acid), photosynthetic pigments and chlorophyll fluorescence. However, under the same water stress conditions, they decreased as the N rate increased and reached a minimum value in the S3 (water stress for N3) treatments. In addition, with growth stage advancement and extension of the rehydration time, both showed a gradual upward trend. The results showed that to save water resources in the cold semi-arid region, rehydration treatments (R2S1 and R2S3) significantly increased the photosynthetic pigments and chlorophyll fluorescence parameters, leaf moisture status, biomass, 100-grain weight, hormone content, ear characteristics and grain yield of maize.     

美国车厘子组织培养试验

采用美国思加图车厘子室内盆栽萌发的嫩芽和老芽作为外植体,分析不同处理时间对车厘子外植体萌芽效果的影响;采用不同浓度的植物生长调节剂对其进行诱导增殖和生根培养,筛选最佳组培方法。结果表明：嫩芽是车厘子外植体的最佳选择,通过7 s酒精和0.1%升汞9 min消毒获得无菌体,污染率低、褐化率较低、萌芽率60%。芽诱导培养基为MS+6-BA 1.0 mg/L+NAA 0.2 mg/L,增殖系数为3.92。生根培养基为1/2MS+NAA0.6 mg/L,生根率为100%。移栽炼苗基质比例为V（腐殖土）∶V（红土）=4∶6,盖膜驯化,保湿温度（25±2）℃,湿度80%,成活率达90%以上。     

crataegus grayana的组织培养

同许多种其它果树一样,山植属的Crataegus grayana也可应用组织培养的方法,进行快速繁殖。在加入0.25ppmBA,0.5ppmIAA以及150ppm水解干酪素的MS培养基上,可由胚得到实生苗。在加入0.5ppm和300ppm水解干酪素的MS培养基上,由茎尖与茎段可得到壮实的试管苗。由于该植物胚在第一年内成熟度甚低,因此用茎尖或茎段进行快繁殖远优于用胚来进行。从此项研究结果看,其繁殖率为2~n-3~n(n为∮月数)。     

草莓快速繁殖技术的研究

本文探讨了利用茎尖离体培养法进行草莓快速繁殖的方法。主要摸索了激素对试管苗的分化、生根的影响及移栽成活的技术要点。     

花椒病虫害影响因素的初步研究

花椒Zanthoxylum bungeanum Maxim属芸香科花椒属植物,四川省北川县青片乡花椒种植面积较大,由于当地花椒风味独特,市场供不应求.但是,当地花椒树一直受根腐病、花椒虎天牛和花椒瘿蚊的危害,致使约80%的椒树未达到盛果期就死亡.     

NaCl胁迫对丁香‘瓷蓝’光合作用及叶绿素荧光的影响

为研究NaCl胁迫对丁香‘瓷蓝’光合作用的影响,以‘瓷蓝’的一年生扦插苗为试材,对不同浓度NaCl胁迫下‘瓷蓝’的叶绿素含量、光合特性及叶绿素荧光参数等进行研究。结果表明:盐胁迫使得光合性能降低,并且随着盐浓度的增加,叶绿素含量、光化学猝灭系数(q P)、PSⅡ的实际光化学效率(ΦPSⅡ)和PSⅡ最大光化学量子产量(Fv/Fm)呈下降趋势。非光化学猝灭系数(NPQ)呈先增加后下降趋势。光合速率下降的主要原因为气孔限制。‘瓷蓝’的耐盐范围在0.4%以下,在盐浓度低于0.4%时会通过提高非光化学猝灭系数(NPQ)来抵抗胁迫造成的伤害,当盐浓度高于0.4%时其光合机构受损严重,产生严重光抑制。     

长吻鮠精子保存液在人工授精中的应用试验

分别在安徽长江流域的无为和淮河流域的滁州进行长吻鮠的人工繁殖,使用LRH-A2、PG、混合激素B型、DOM 进行催产,从长江捕获的亲鱼立即催产,其催产率为66．67％,受精率80％-85％,经培育选择后催产率为83．33％,受精率65%- 87％。在滁州经多年培育的亲鱼催产率为100％,受精率78％-95％。精子保存液在精子保存和人工授精中使用效果良好。在冰桶内保存,20-30 h仍能保持良好的受精能力。     

Analysis of Sewage-water Heat Exchanger withthe Function of Auto-de-fouling

A sewage-water shell-tube heat exchanger with the function of de-fouling was proposed and designed for sewage-source heat pump. Its new simulation program which relies on a distribution parameter computational method was set up. Then the model was solved with the method of Matrix Control. Based on the model, the distribution of bilateral fluid temperature were studied, under the conditions of different flow rates and heat exchange area before and after the de-fouling. Results showed that there will be heat anti-transfer phenomenon if the heat exchanger area is bigger than need and the region of this phenomenon was point out. Setting the function of auto-de-fouling in shell-tube heat exchanger and reducing the equipment's volume accordingly can make the sewage-water heat exchanger run in the best conditions.