Soil CO2 emission in sugarcane management systems

Sugarcane management systems affect soil attributes such as the carbon cycle. This fact has stimulated the sugar and alcohol industry to refine the sugarcane production systems by replacing the pre-harvest burning (PB) and manual harvest with mechanized harvesting followed by residue deposition. The aim of this study was to evaluate different management systems with respect to C cycling carbon dioxide and soil parameters (chemical, physical and biological) which were determined over the season. Three sugarcane cultivation systems were evaluated at the following periods: (a) PB, (b) 5-year green harvest and (c) 10-year green harvest. The results indicated that CO₂ emission was 36% greater in the 10-year sugarcane green harvest system than in the PB system. The bulk density and macroporosity were the factors that were most affected by the different sugarcane management systems and that significantly influenced soil CO₂ emissions. The principal component analysis showed that soil CO₂ emission was 18% influenced by base saturation (V%) and 14% by pH, especially in the PB area. Additionally, 19% was affected by carbon and macroporosity in the 5- and 10-year green harvest areas, respectively. From our results, it can be concluded that the most CO₂ emissions are in the areas of sugarcane green, this is due to the higher carbon concentration when compared with the area of burning sugarcane. The parameters that most influenced the CO₂ emissions were bulk density, porosity, macroporosity, pH and V%.     

Model organic compounds differ in their effects on pH changes of two soils differing in initial pH

The mechanisms by which organic materials affect soil pH are not fully understood. This study for the first time compared the short-term effect of various model organic compounds on pH change of two soils differing in initial pH (Podosol of pH 4.4 and Tenosol of pH 6.1). Eight organic compounds, representing common compounds in plant residues, were selected based on the number and type of chemical functional groups. The addition of organic acids (acetic, malic, citric, and benzoic acid) reduced soil pH immediately due to H⁺ dissociation. The magnitude of pH decrease depended on the rate of application, degree of dissociation of the acids, and initial soil pH. During a subsequent incubation, pH was slowly restored as these compounds were decomposed. The degree to which pH was restored was reduced with increasing addition rate. The production of H⁺ ions was increased with increasing rate of acid addition and decreased over time. When potassium citrate (organic anion) was added, soil pH increased due to H⁺ consumption upon decomposition. Compounds with amine groups (glucosamine hydrochloride) and less easily decomposable compounds (phenol) did not significantly alter pH during 16-day shaking. Changes in pH after glucose addition were relatively small compared with other compounds and were not expected because hydroxyl chemical groups of glucose are neutral. The present study demonstrated that the addition of model organic compounds to soil caused soil pH to increase, decrease, or remains unaffected. The extent and direction of pH change was dependent on the chemical functional group, addition rate, decomposition, and the initial soil pH.     

In situ quantification of CH<Subscript>4</Subscript> bubbling events from a peat soil using a new infrared laser spectrometer

Purpose  

CH₄ emissions from peatlands are space and time dependent. The variety of efflux routes contributes to these variabilities. CH₄ bubbling remains difficult to investigate since it occurs on a timescale of seconds. The aims of this study were to use for the first time the recently built infrared high-resolution spectrometer, SPectrometre Infra-Rouge In situ Troposphérique to (1) measure in situ CH₄ fluxes in natural and artificial peatland plot and (2) observe online bubbling events with quantification of CH₄ emission fluxes corresponding to this very sudden degassing event.     

Occurrence of pharmaceutical and personal care products (PPCPs) in marine sediments in the Todos os Santos Bay and the north coast of Salvador,Bahia, Brazil

Purpose

The Todos os Santos Bay is the largest bay in Brazil and receives drainage from various watersheds. For more than 450 years, it was the main destination for the domestic and hospital sewage from the city of Salvador, Bahia. With the growing concern regarding the presence of pharmaceutical and personal care products (PPCPs) in the environment, an investigation was undertaken to determine the presence and levels of some commonly used drugs (i.e., atenolol, caffeine, carbamazepine, diazepam, diclofenac, erythromycin, ibuprofen) and personal care products (i.e., galaxolide, tonalide), using sediments as an indicator of their presence in the water column.

Material and methods

Surficial sediment samples from 17 stations located in the intertidal zone of the Todos os Santos Bay and infralittoral zone along the north coast of Salvador were tested for the presence of some PPCPs using LC-MS/MS (for drugs) and GC-MS/MS (for fragrances).

Results and discussion

The PPCPs examined were present in all sediment samples at levels of parts per billion of dry sediment. The highest concentrations were found for the fragrances galaxolide (52.5 ng g^?1) and tonalide (27.9 ng g^?1), followed by caffeine (23.4 ng g^?1) and pharmaceuticals ibuprofen (14.3 ng g^?1), atenolol (9.84 ng g^?1), carbamazepine (4.81 ng g^?1), erythromycin (2.29 ng g^?1), diclofenac (1.06 ng g^?1), and diazepam (0.71 ng g^?1).

Conclusions

Pharmaceuticals were found to be ubiquitous in the sediments of the study areas. The texture of the sediment was an important factor in PPCPs fixation and deposition. The concentrations of all PPCPs had statistically significant positive correlations with the percentage of clay in the sediments.     

Removal of Arsenic from Aqueous Solutions by Sorption onto Sewage Sludge-Based Sorbent

This study aimed at evaluating and comparing the removal of arsenic from solutions by a low-cost waste-based sorbent, produced by pyrolysing sewage sludge under appropriate conditions, and by a commercially activated carbon. Batch sorption experiments were performed under isothermal conditions (20°C), in order to evaluate the effect of pH on the arsenic sorption kinetics and on the equilibrium sorption capacity of the materials under study. Kinetic data revealed that the arsenic sorption was faster onto the activated carbon than onto the pyrolysed sludge. The sorption process was well described by both the pseudo-first and pseudo-second-order kinetics equations for both materials. Changes in the initial solution pH have distinct effects on the removal of arsenic onto pyrolysed sludge and activated carbon. While for pyrolysed sludge, pH affects essentially the equilibrium time, for activated carbon it affects the sorption capacity. Equilibrium results were well described by both Freundlich and Langmuir isotherm models, although fittings corresponding to the Langmuir isotherm were slightly better. The Langmuir maximum sorption capacity determined for the pyrolysed sludge was 71???g?g^?1, while for activated carbon was 229???g?g^?1. Despite the relative lower capacity of the pyrolysed sludge, the considerable lower cost and the valorisation of the sludge may justify further research on its use for water decontamination.     

Heavy metal and PCB spatial distribution pattern in sediments within an urban catchment—contribution of historical pollution sources

Purpose

This work analyzes polychlorinated biphenyl (PCB) and heavy metal contamination in fluvial sediments and soils in an urban catchment, according to the geo-accumulation index and to soil and sediment quality guidelines. The catchment is located in Coimbra, Portugal, being affected by frequent flooding, and its main stream is a tributary to one of the major rivers in Portugal (Mondego). Given the presence of industrial activities over time, some inputs of pollutants are expected, but so far, the legacy of historic pollution in this catchment has not yet been investigated.

Materials and methods

Twenty-five samples were collected from nine sampling sites at the depths of 0–20, 20–40 and 40–60 cm (to provide a historic perspective) along longitudinal profiles (streamlines) and in soils downstream of pollution sources. These samples were analyzed for six heavy metals (Cu, Cr, Pb, Cd, Zn, Ni), organic carbon, pH and ten PCBs (IUPAC numbers 28, 30, 52, 101, 138, 153, 166, 180, 204, 209).

Results and discussion

Total PCB concentrations ranged 0.47–5.3 ng g^?1 dry weight (dw), and levels increase from the bottom to the top layers, suggesting an increased input over the last 100 years. PCB congener distribution shows the dominance of hexachlorobiphenyls, especially PCB138, suggesting the existence of local sources. PCB levels did not exceed sediment quality levels, placing sediments/soil under class 1 (not contaminated) or class 2 (trace contamination) with respect to PCB. All six metals exceeded the lowest effect level for sediment quality criteria, and three (Cd, Pb and Zn) largely exceeded the clean levels for dredged materials, placing sediments in class 5 (heavily contaminated). Sampling site S1 presented the highest concentrations of Zn, Pb and Cd, and historic vehicle traffic was identified as the most likely source, given the vertical and horizontal profiles.

Conclusions

High levels of Pb, Cd and Zn were found in fluvial sediments at some locations of the Loreto catchment, likely from historic traffic sources. This urban area is frequently affected by flooding events and is currently being subject to urban redevelopment. During these events/actions, historic pollutants in the sediments might surface and be redistributed, impacting the downstream ecosystem of the major Mondego River or increasing the risk of exposure of the urban population.

     

Co-inoculation of selected nodule endophytic rhizobacterial strains with Rhizobium tropici promotes plant growth and controls damping off in common bean

Production of common bean(Phaseolus vulgaris)is limited by the occurrence of damping off(rhizoctoniosis),which is caused by the fungus Rhizoctonia solani.However,the co-inoculation of plant growth-promoting rhizobacteria(PGPR)involved in biological control along with diatomic nitrogen(N2)-fixing rhizobia can enhance N nutrition and increase production.In this context,finding microorganisms with synergistic effects that perform these two roles is of fundamental importance to ensure adequate yield levels.The aim of this study was to evaluate the effects of co-inoculation of nodule endophytic strains of the genera Bacillus,Paenibacillus,Burkholderia,and Pseudomonas with Rhizobium tropici CIAT 899,an N2-fixing rhizobial strain,on the biocontrol of damping off and growth promotion in common bean plants.Greenhouse experiments were conducted under axenic conditions using the common bean cultivar Pérola.The first experiment evaluated the potential of the 14 rhizobacterial strains,which were inoculated alone or in combination with CIAT 899,for the control of R.solani.The second experiment evaluated the ability of these 14 rhizobacterial strains to promote plant growth with three manners of N supply:co-inoculation with CIAT 899 at low mineral N supply(5.25 mg N mL^-1),low mineral N supply(5.25 mg N mL^-1),and high mineral N supply(52.5 mg N mL^-1).The use of rhizobacteria combined with rhizobia contributed in a synergistic manner to the promotion of growth and the control of damping off in the common bean.Co-inoculation of the strains UFLA 02-281/03-18(Pseudomonas sp.),UFLA 02-286(Bacillus sp.),and UFLA 04-227(Burkholderia fungorum)together with CIAT 899 effectively controlled damping off.For the common bean,mineral N supply can be replaced by the co-inoculation of CIAT 899 with plant growth-promoting strains UFLA 02-281/02-286/02-290/02-293.Nodule endophytes UFLA02-281/02-286 are promising for co-inoculation with CIAT 899 in the common bean,promoting synergy with rhizobial inoculation and protection against disease.     

Neuronal Differentiation of Rat Hair Follicle Stem Cells: the Involvement of the Neuroprotective Factor Seladin-1 (DHCR24)

Background: The seladin-1 (selective Alzheimer disease indicator-1), also known as DHCR24, is a gene found to be down-regulated in brain region affected by Alzheimer disease (AD). Whereas, hair follicle stem cells (HFSC), which are affected in with neurogenic potential, it might to hypothesize that this multipotent cell compartment is the predominant source of seladin-1. Our aim was to evaluate seladin-1 gene expression in hair follicle stem cells. Methods: In this study, bulge area of male Wistar rat HFSC were cultured and then characterized with Seladin-1 immunocytochemistry and flow cytometry on days 8 to 14. Next, 9-11-day cells were evaluated for seladin-1 gene expression by real-time PCR. Results: Our results indicated that expression of the seladin-1 gene (DHCR24) on days 9, 10, and 11 may contribute to the development of HFSC. However, the expression of this gene on day 11 was more than day 10 and on 10^th day was more than day 9. Also, we assessed HFSC on day 14 and demonstrated these cells were positive for β-ш tubulin, and seladin-1 was not expressed in this day. Conclusion: HFSC express seladin-1 and this result demonstrates that these cells might be used to cell therapy for AD in future. Key Words: Seladin-1 (selective Alzheimer disease indicator-1), Alzheimer disease (AD), Hair follicle stem cells     

Development and Characterization of Calcium-Alginate Beads of Apigenin: In Vitro Antitumor,Antibacterial, and Antioxidant Activities

The objective of this work was to develop sustained-release Ca-alginate beads of apigenin using sodium alginate, a natural polysaccharide. Six batches were prepared by applying the ionotropic gelation technique, wherein calcium chloride was used as a crosslinking agent. The beads were evaluated for particle size, drug loading, percentage yield, and in vitro drug release. Particle size was found to decrease, and drug entrapment efficiency was enhanced with an increase in the polymer concentration. The dissolution study showed sustained drug release from the apigenin-loaded alginate beads with an increase in the polymer proportion. Based on the dissolution profiles, BD6 formulation was optimized and characterized for FTIR, DSC, XRD, and SEM, results of which indicated successful development of apigenin-loaded Ca alginate beads. MTT assay demonstrated a potential anticancer effect against the breast cancer MCF-7 cell lines. The antimicrobial activity exhibited effective inhibition in the bacterial and fungal growth rate. The DPPH measurement revealed that the formulation had substantial antioxidant activity, with EC50 value slightly lowered compared to pure apigenin. A stability study demonstrated that the BD6 was stable with similar (f2) drug release profiles in harsh condition. In conclusion, alginate-based beads could be used for sustaining the drug release of poorly water-soluble apigenin while also improving in vitro antitumor, antimicrobial, and antioxidant activity.     

Structural Characterization of New Peptide Variants Produced by Cyanobacteria from the Brazilian Atlantic Coastal Forest Using Liquid Chromatography Coupled to Quadrupole Time-of-Flight Tandem Mass Spectrometry

Cyanobacteria from underexplored and extreme habitats are attracting increasing attention in the search for new bioactive substances. However, cyanobacterial communities from tropical and subtropical regions are still largely unknown, especially with respect to metabolite production. Among the structurally diverse secondary metabolites produced by these organisms, peptides are by far the most frequently described structures. In this work, liquid chromatography/electrospray ionization coupled to high resolution quadrupole time-of-flight tandem mass spectrometry with positive ion detection was applied to study the peptide profile of a group of cyanobacteria isolated from the Southeastern Brazilian coastal forest. A total of 38 peptides belonging to three different families (anabaenopeptins, aeruginosins, and cyanopeptolins) were detected in the extracts. Of the 38 peptides, 37 were detected here for the first time. New structural features were proposed based on mass accuracy data and isotopic patterns derived from full scan and MS/MS spectra. Interestingly, of the 40 surveyed strains only nine were confirmed to be peptide producers; all of these strains belonged to the order Nostocales (three Nostoc sp., two Desmonostoc sp. and four Brasilonema sp.).