Potential angiotensin I converting enzyme inhibitory peptides from gluten hydrolysate: Biochemical characterization and molecular docking study

The present study was carried out to characterize ACE inhibitory peptides which are released from the trypsin hydrolysate of wheat gluten protein. In silico proteolitic digestion of a high molecular weight glutenin subunit was performed. Among the resultant fragments, four peptides were selected for chemical synthesis based on the chemoinformatics studies and docking properties. The ACE inhibitory activity and kinetic parameters of the most important peptides were determined. Molecular docking simulation was also performed to predict the sites on ACE in which these peptides bind and displayed inhibition mechanisms. Two peptide sequences of IPALLKR (P4) and AQQLAAQLPAMCR (P6) showed higher ACE inhibitory activity among peptide collection. The IC₅₀ values of P6 and P4 were 43 ± 1.3 μM and 68 ± 2.8 μM, respectively. P6 peptide was proved to be a more potent ACE inhibitor than P4 peptide. Lineweaver-Burk plots revealed that P6 and P4 behaved as non-competitive and competitive ACE inhibitors, respectively. The simulations showed that P4 bound to the active site region. Conversely, P6 bound to the N-terminus entrance of substrate tunnel and obstructed the substrate access into the catalytic site. Overall, the results showed that these peptides would be considered as a model for discovering new bio-compatible ACE inhibitors.     

Comparison of steady- and unsteady-state drainage equations for determination of subsurface drain spacing in paddy fields: a case study in Northern Iran

In Northern Iran paddy fields, waterlogging is a serious problem. Provision of subsurface drainage seems to be a prerequisite for optimal crop production. Considering specific characteristics of the paddies, application of a suitable equation for planning of subsurface drainage systems is of great importance. In this study, five steady-state equations including Hooghoudt, Kirkham, Dagan, Ernst, and Ernst–Hooghoudt; and three unsteady-state equations including Glover–Dumm, Van-Shilfgard, and De-zeeuw–Hellinga were implemented to compute drain spacing. Required field data were obtained from 52 ha of paddy fields of “Haraz Human-Agriculture Resources Development Center,” located in Mazandaran province of Iran. The computed drain spacings were evaluated using dynamic equilibrium concept and DRAINMOD model. The minimum and maximum drain spacings were found to be 26 and 63 m corresponding to Glover–Dumm and Ernst equations, respectively. Based on the dynamic equilibrium concept, the averages of the computed water table depths for the drain spacings obtained by the unsteady-state equations were 0.5–0.63 m as compared with those obtained by the steady-state methods which were in the range of 0–0.43 m. According to the DRAINMOD model simulations, the maximum relative yield was 80.2 % which was obtained when the drain spacing was 26 m and it reduced to 73.5 % when the drain spacing was increased to 63 m. The computed drain spacings suggested by the unsteady-state equations were found to be more suitable than those obtained from the steady-state equations for the study area.     

Electrically conductive paper of polyaniline modified pineapple leaf fiber

This research work reports new electrically conductive paper made of pineapple leaf fiber and polyaniline (PALF/PANI). The conductive paper shows remarkable preservation of mechanical properties while achieving its conductive state. Also it was found that, the amount of PANI needed to achieve the conductivity transformation is as low as 5 wt.%.     

Alkaline sulfite–anthraquinone (AS/AQ) pulping of wheat straw and totally chlorine free (TCF) bleaching of pulps

Alkaline sulfite–anthraquinone (AS/AQ) pulping of wheat straw and totally chlorine free (TCF) bleaching of resulting pulps was investigated. Wheat straw was supplied by the Ferdosii University Experimental Station in Northeastern Iran, cleaned and chopped into about 3–5 cm long pieces. In the AS/AQ pulping experiments, the active alkali charge on oven dry wheat straw, heating time to maximum cooking temperature, AQ dose and liquor to straw ratio were kept constant at 16%, 60 min, 0.1% and 4/1, respectively. The alkali ratio, Na₂SO₃/NaOH, calculated as NaOH, was varied from 20/80 to 80/20. Cooking time at maximum temperature was varied from 30 to 90 min and maximum cooking temperature was adjusted between 152 and 160 °C. Reference soda and soda/AQ pulps were produced.AS/AQ and soda/AQ pulps with kappa numbers below 15 were produced easily. Cooking of corresponding soda pulps under comparable conditions stopped at a kappa number of 25. The characteristics of unbleached AS/AQ, soda/AQ and soda pulps were compared. AS/AQ and soda/AQ pulps had similar tensile strength but tear was in favor to AS/AQ. The latter had much higher yield and brightness.TCF bleaching of AS/AQ pulp was performed in O Q (OP) or O Q (OP) P sequences. Oxygen delignification (O) resulted in a delignification degree of approximately one third. Followed by a chelating treatment (Q) and a subsequent (OP) stage under drastic conditions a brightness of 82.7% ISO was achieved in an O Q (OP) sequence. The sequence O Q (OP) P, with 2% H₂O₂ in the final P stage, improved brightness from 77.2% ISO after the OP stage to 83.6% ISO. Bleaching led to only small losses in tensile and burst strength but enhanced tear strength. Short beating in a Jokro mill was sufficient to attain good pulp strength. The results of this study indicate that AS/AQ pulping and TCF bleaching is a convincing alternative to produce high-quality pulp from wheat straw for writing and printing paper.     

Naringin-loaded Poly(ε-caprolactone)/Gelatin Electrospun Mat as a Potential Wound Dressing: In vitro and In vivo Evaluation

In the present study, naringin, a flavonoid isolated from the grape and citrus fruit species, was incorporated with poly(ε-caprolactone)/gelatin composite mats in order to develop a potential wound dressing. The composite mats were prepared by electrospinning of poly(ε-caprolactone)/gelatin (1:1 (w/w)) solution incorporated with 1.50 %, 3 % and 6 % (w/w) of naringin. The electrospun mats were evaluated regarding their morphology, contact angle, water-uptake capacity, water vapor transmission rate, tensile properties, drug release, cellular response and in vivo wound healing activity. The study showed that after 2 weeks, the full-thickness excisional wounds of Wistar rats treated with the naringin-loaded dressings achieved a wound closure of higher than 94 % and the dressing containing 6 % (w/w) naringin had almost 100 % wound closure. The sterile gauze, as the control group, showed nearly 86 % of wound closure after this period of time. Our results provided evidence that supports the possible applicability of naringin-loaded wound dressing for successful wound treatment.     

On-farm impacts of zero tillage wheat in South Asia's rice–wheat systems

The recent slow down in productivity growth in the irrigated areas of the Indo-Gangetic Plains of South Asia has led to a quest for resource-conserving technologies that can reduce production costs, save water and improve production. Findings from farm surveys are used to evaluate the on-farm impacts of zero tillage (ZT) wheat in the rice–wheat systems of India's Haryana state and Pakistan's Punjab province. ZT-induced effects primarily apply to the establishment and production costs of the wheat crop. Both study sites confirmed significant ZT-induced resource-saving effects in farmers’ fields in terms of diesel, tractor time and cost savings for wheat cultivation. Water savings are, however, less pronounced than expected from on-farm trial data. It was only in Haryana, India that there were significant ZT-induced water savings in addition to significant yield enhancement. The higher yield and water savings in Haryana, India result in significantly higher water productivity indicators for ZT wheat. In both sites, there are limited implications for the overall wheat crop management, the subsequent rice crop and the rice–wheat system as a whole. The combination of a significant “yield effect” and “cost-saving effect” makes adoption worthwhile and provide a much needed boost to the returns to wheat cultivation in Haryana, India. In Punjab, Pakistan, ZT is primarily a cost-saving technology for wheat cultivation. The prime driver for ZT adoption is not water savings or natural resource conservation but monetary gain in both sites. Water savings are only a potential added benefit.     

Synthesis,structure and thermal protective behavior of silica aerogel/PET nonwoven fiber composite

In recent years, flexible, mechanically strong and environmental friendly thermal insulation materials have attracted considerable attention. In this work, silica aerogel/polyethylene terephthalate (PET) nonwoven fiber composite with desirable characteristics was prepared via a two-step sol-gel process followed by an ambient drying method through immersing the PET nonwoven fiber into silica sol. The silica aerogel particles were characterized by FTIR, FE-SEM, TGA and nitrogen adsorption analysis. The morphology and hydrophobic properties of neat PET nonwoven fiber and its silica aerogel composite were also investigated. For studying thermal protective properties, the thermal diffusivity was calculated from temperature distribution curves. The mean pore size of 11 nm, the surface area of 606 m²/g and the total pore volume of 1.77 cm³/g for the silica aerogel particles in the composite are obtained from nitrogen adsorption analysis, indicating the aerogel can maintain its high porosity in the nonwoven composite structure. Silica aerogel particles were efficiently covered the surface of the PET fibers and completely filled the micron size pores of the nonwoven fiber leading to a stronger hydrophobicity and higher thermal insulation performance in the aerogel composite samples compared to the neat PET nonwoven. In this regard, an almost 64 % decrease in the thermal diffusivity was achieved with 66 wt% silica aerogel.     

Effect of temperature on lutein esterification and lutein stability in wheat grain

The creamy colour of many wheat-based end-products is conferred by endogenous lutein. During post-harvest storage of grain, free lutein may be converted in part to potentially more stable lutein mono- and di-fatty acid esters. This study investigates the synthesis of lutein esters and stability of free lutein and lutein esters over a wide range of temperatures in grain of a high lutein bread wheat, Triticum aestivum L. line DM5685*B12 and a durum, Triticum durum L cv Kamilaroi. Disappearance of free lutein and lutein esterification followed first order reaction rates. The maximum rate of lutein esterification was at ≈80 °C, however, the optimum temperature for maximum synthesis with minimum degradation was between 30 °C and 60 °C. No ester synthesis was observed at temperatures higher than 120 °C. The data are consistent with an enzyme participating in the esterification reaction. Lutein esters were found to be more stable than free lutein with a longer shelf life at 60 °C whilst at temperatures ≤40 °C, lutein degradation was minimal. This study provides new information on lutein ester formation and lutein stability that should be useful to grain handlers and food manufacturers seeking to optimise retention of lutein for the benefit of consumers.