Gel structures in soils

The colloidal structures in soils were studied by scanning and transmission electron microscopy. Small-angle neutron scattering was used in the pioneering study of the colloidal soil structures and their rearrangements under the effect of different factors. It was found that colloidal particles are fixed apart in a gel matrix formed by organic molecules. The results obtained suggest that the organomineral gel is composed of soil humus occurring, at least in part, in a gel-like status and reinforced by organic and inorganic colloidal particles. In the interaction with water, the reinforced humus gel behaves as many polymers: it swells, absorbing water and increasing in volume; it shrinks under drying conditions. Different impacts on the soil affect the status of the reinforced humus gel, which results in the observed changes of the soil properties.     

Comparative evaluation of the emulsifying properties of phosphatidylcholine after enzymatic acyl modification

The ability of enzymatically synthesized structured phosphatidylcholine (PC) containing caprylic acid to form and stabilize oil-in-water emulsions prepared with different triglycerides [medium chain triglycerides (MCT), soybean oil, and enzymatically synthesized structured lipids] was examined and compared with natural soybean PC and deoiled lecithin. Emulsions were prepared with varying oil and emulsifier concentrations. The particle size distribution, creaming stability, and viscosity were measured for the evaluation of the emulsifying properties. With an increase in the oil concentration, there was an increase in particle size, viscosity, and creaming layer. With an increase in the phospholipid (PL) concentration, there was usually a decrease in particle size and an increase in viscosity, where the emulsion stability was increased. General emulsions prepared with structured lipids resulted in smaller particle sizes as compared to MCT and soybean oil. Deoiled lecithin was able to increase the viscosity more significantly and give smaller particle sizes as compared to the other emulsifiers, thus producing more stable emulsions. However, in certain cases, structured PC was superior to deoiled lecithin and soybean PC. This observation was made for emulsions prepared with soybean oil or structured lipid at an oil/water ratio of 10:90. At an oil/water ratio of 30:70, the deoiled lecithin performed better as compared to the other PLs with all oil types. However, structured PC produced more stable emulsions as compared to natural soybean PC in MCT and soybean oil.     

Tillage-induced environmental conditions in soil and substrate limitation determine biogenic gas production

Tillage changes soil environmental conditions and controls the distribution of residues in the soil, both actions that affect the production and emission of soil biogenic gases (CO₂, N₂O, and CH₄). The objective of this study was to determine how tillage-induced environmental conditions and substrate quality affect the mineralization rate of easily metabolizable compounds and the subsequent production of these gases. Carbon compounds, with and without nitrogen, were applied to soil cropped to maize under tilled and no-till systems. Following substrate application in the spring and summer, biogenic gases were measured periodically at the soil surface (flux) and within the profile (concentration) at 10-, 20-, and 30-cm depths (i.e., within, at the bottom of, and below the plough layer). Strong CO₂ and N₂O responses to sucrose and glycine in both the field and the laboratory indicate that the soil was C- and N-limited. Surface fluxes of CO₂ and N₂O were greater in soils amended with glycine than with sucrose and were greater in tilled than no-till soils. Transient emission of CH₄ following the addition of glycine was observed and could be attributed to inhibition of N mineralization and nitrification processes on CH₄ oxidation. Laboratory and field measurements indicated that the larger substrate-induced CO₂ emission from the tilled soils could not be attributed to differences in the total biomass or the basal respiratory activity of the soils. Thus, there appears to be no underlying difference in the functional capacity of the microbial communities under different tillage regimes. Comparison of gas profiles indicates relative accumulation of CO₂ at depth in soils under no-till, as well as greater decline in profile CO₂ content with time in the tilled compared to the no-till soil. These results support the conclusion that greater CO₂ efflux from the tilled soils resulted from more rapid gas diffusion through the profile. Hence, the observed differences in gas fluxes between tilled and no-till soils can be attributed to differences in physical environment.     

Effects of three soil tillage systems on some biological activities in an Ultisol from southern Chile

Intensive tillage for annual crop production may be affecting soil health and quality. However, tillage intensity effects on biological activities of volcanic-derived soils have not been systematically investigated. We evaluated the effects of three different tillage practices on some biological activities of an Ultisol from southern Chile during the third year of a wheat–lupin–wheat crop sequence. Treatments were: no tillage with stubble burning (NTB), no tillage without stubble burning (NT) and conventional tillage with disk-harrowing and stubble burning (CT). Biological activities were evaluated in winter and summer at 0–200 mm and at three soil depths (0–50, 50–100 and 100–200 mm) in winter. Total organic C and N were significantly higher under no-tillage systems than CT. In general, NT increased C and N of microbial biomass in comparison with CT, especially in winter. Microbial biomass C was closely associated with microbial biomass N (r = 0.986, P < 0.05); acid phosphomonoesterase (r = 0.999, P < 0.05); β-glucosidase (r = 0.978, P < 0.05), and others. Changes in biological activities occurred mainly in the upper soil layer (0–50 mm depth) in spite of the short duration of the experiment. Biological activities could be used as practical biological indicators to apply the more appropriate management systems for increasing soil sustainability or productivity.     

Capillary electrophoresis and high-performance liquid chromatography determination of polyglutamyl 5-methyltetrahydrofolate forms in citrus products

The 5-methyltetrahydrofolate (5mTHF) polyglutamates in citrus products were analyzed by capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC). Folate species were purified from citrus products and concentrated from 2- to 100-fold using combined folate-affinity chromatography and C18 extraction. Seven polyglutamyl 5mTHFs were found in most not-from-concentrate (NFC) orange juices (OJ) in total amounts of approximately 1 nmol/mL, with varying distributions of individual polyglutamates. Folate amounts and distributions were also measured in orange fractions, single-strength OJ from concentrate, NFC grapefruit juice, and citrus peel molasses. Models containing ascorbic acid had folate thermal degradation rates one-seventh that of models without ascorbic acid. Pasteurization studies demonstrated that folate loss was <2% for commercial OJ pasteurization conditions (i.e., 93 degrees C for 5 s, 88 degrees C for 15 s, and 82 degrees C for 30 s). Both methods were precise, reproducible, and potentially faster than traditional analytical procedures requiring enzymatic deconjugation and microbial assays.     

Artificial neural networks for estimating soil hydraulic parameters from dynamic flow experiments

Inverse methods are often used for estimating soil hydraulic parameters from experiments on flow of water through soil. We propose here an alternative method using neural networks. We teach a problem‐adapted network of radial basis functions (RBF) the relationship between soil parameters and transient flow patterns using a numerical flow model. The trained RBF network accurately identifies soil parameters from flow patterns not contained in the training scenarios. A comparison with the inverse method (Annealing‐Simplex) reveals a similarly good prediction by both approaches for randomly perturbed data and data from the real world. Nonetheless, the inverse method showed dependency on initial parameter estimates not required by the RBF network. Training demands moderately more computation and manpower than the inverse technique, but the absolutely stable and simple network application requires negligible resources. Thus, for individual applications, the network approach is slightly surpassed by the Annealing‐Simplex method. However, the RBF network has to be trained only once and, subsequently, it can be applied easily and without effort upon any number of laboratory experiments with standardized experimental setups.     

Effects of alternative tillage systems on soil quality and yield of spring cereals on silty clay loam and sandy loam soils in the cool, wet climate of central Norway

Tillage trials were established on a poorly drained silty loam overlying silty clay loam and on a freely drained sandy loam overlying medium sand, in 1988 and 1989, respectively. Autumn and spring ploughing and two ploughless systems were compared for 12–13 years, with three replications at each site. The ploughless treatments comprised deep versus shallow spring harrowing until 1999, and thereafter autumn plus spring harrowing versus spring harrowing only. In 6 years, treatments with and without fungal spraying of the cereal crops were included. In other years, fungicides were not used. Perennial weeds were controlled by herbicides as necessary, on nine occasions up until 2001. Average spring barley (Hordeum vulgare L.) and spring oat (Avena sativa L.) yields were similar with spring ploughing as with autumn ploughing at both sites. In treatments without ploughing, average yields on the silty loam over clay were 93% of those obtained with ploughing, and on the sandy loam over sand they were 81%. Smaller and non-significant yield differences were found between spring harrowing versus deep spring harrowing, and between autumn plus spring harrowing versus spring harrowing only. Fungal spraying increased yields markedly at both sites (25%), but there was no significant interaction between this treatment and tillage system. Oat was compared with barley in 2 years, with oat performing better under ploughless tillage. At both sites increases in penetrometer resistance occurred in the topsoil of unploughed treatments. These were considered particularly limiting on the sandy loam. On the silty loam there was an increase in surface horizon porosity in the absence of ploughing, which was associated with an increase in topsoil organic matter content. On this soil there was also a tendency toward lower penetrometer resistance at >30 cm depth on autumn plus spring harrowed soil than on ploughed soil, indicating that the plough pan may have diminished. This was supported by observations of greater earthworm activity on unploughed soil. Soil chemical analyses revealed that mineral N and plant-available P and K accumulated in the upper horizon under ploughless tillage. The percentage yields obtained in individual years with autumn as opposed to spring ploughing, were positively correlated with air temperature during 0–4 weeks after planting on the silty loam, and with precipitation during 0–12 weeks after planting on the sandy loam. In the case of yields obtained with spring harrowing only, relative to spring ploughing, positive correlations were found with 0–4 week temperature on both soil types, suggesting that low early season temperatures may limit yields under ploughless tillage.     

Proton toxicity interferes with the screening of common bean (Phaseolus vulgaris L.) genotypes for aluminium resistance in nutrient solution

Common bean (Phaseolus vulgaris L.) proved to be very sensitive of low pH (4.3), with large genotypic differences in proton sensitivity. Therefore, proton toxicity did not allow the screening of common bean genotypes for aluminium (Al) resistance using the established protocol for maize (0.5 mM CaCl₂, 8 μM H₃BO₃, pH 4.3). Increasing the pH to 4.5, the Ca²⁺ concentration to 5 mM, and addition of 0.5 mM KCl fully prevented proton toxicity in 28 tested genotypes and allowed to identify differences in Al resistance using the inhibition of root elongation by 20 μM Al supply for 36 h as parameter of Al injury. As in maize, Al treatment induced callose formation in root apices of common bean. Aluminium‐induced callose formation well reflected the effect of Ca supply on Al sensitivity as revealed by root‐growth inhibition. Aluminum‐induced callose formation in root apices of 28 bean genotypes differing in Al resistance after 36 h Al treatment was positively correlated to Al‐induced inhibition of root elongation and Al contents in the root apices. However, the relationship was less close than previously reported for maize. Also, after 12 h Al treatment, callose formation and Al contents in root apices did not reflect differences in Al resistance between two contrasting genotypes, indicating a different mode of the expression of Al toxicity and regulation of Al resistance in common bean than in maize.     

Diesel and glyphosate price changes benefit the economics of conservation tillage versus traditional tillage

Recent increases in diesel price and decreases in glyphosate [N-(phosphonomethyl) glycine] price should favor the profitability and farmer acceptance of herbicide-intensive conservation tillage systems versus fuel-intensive traditional tillage (TT) systems. Profitability results from a long-term field experiment that compared TT, minimum tillage (MT), and delayed minimum tillage (DMT) systems for winter wheat–(Triticum aestivum L.)summer fallow in eastern Washington, USA were calculated using both 1998 and 2005 input prices. Net returns for the MT and DMT systems increased by US$ 6.37 and 6.30 (rotational ha)⁻¹, respectively, and net returns to the TT system decreased by US$ 2.36 (rotational ha)⁻¹ when 2005 versus 1998 prices were used. Here, rotational ha equals 0.5 ha fallow and 0.5 ha wheat. Focusing on the dominant crop of soft white winter wheat (SWWW), the 2005 price hikes pushed diesel costs up for all systems, from US$ 6.81 (rotational ha)⁻¹ for DMT to US$ 9.00 (rotational ha)⁻¹ for TT. The cost of diesel for the conservation tillage systems, relative to the cost for TT, decreased by US$ 1.50–2.20 (rotational ha)⁻¹. The conservation tillage systems accrue greater savings from the price reduction in glyphosate because they consume more of this herbicide. An unanticipated result was that relative cost savings from price changes in N fertilizer rivaled those from diesel and glyphosate because anhydrous NH₃–N was exclusively used in the experiment for TT and aqueous NH₃–N for MT and DMT. The price of anhydrous NH₃–N increased from US$ 0.55 kg⁻¹ in 1998 to 0.85 kg⁻¹ in 2005, a 56% increase. Aqueous NH₃–N only increased from $0.75 kg⁻¹ in 1998 to 0.85 kg⁻¹ in 2005, a 15% increase. The greater price increase for anhydrous NH₃–N penalized the TT system because of its use of this fertilizer. If the same source of N fertilizer were used on all three tillage systems, this fertilizer cost effect would disappear. Nonetheless, the conservation tillage systems still retained a statistically significant profitability advantage over TT even if the same fertilizer was used throughout. The sharp price increase for diesel and the concurrent price decrease for glyphosate herbicide favored the conservation tillage systems over TT in this study. Results provide strong evidence for the superior profitability of conservation tillage winter wheat–summer fallow under current economic conditions.     

Glomalin in aggregate size classes from three different farming systems

Glomalin was measured in soil from farming systems managed for 8 years by chisel tillage (CT), more intensive tillage for organic (ORG) production, and no tillage (NT) on Acrisols (FAO Soil Units) in the Mid-Atlantic region of the U.S. Whole soil and aggregate size classes of >2.00, 0.50–2.00 and 0.21–0.50 mm (macroaggregates), 0.05–0.21 mm (microaggregates), and <0.05 mm (fine material) were examined. Glomalin-related soil protein (GRSP) was extracted from 1-g samples (four plots per treatment) with 100 mM sodium pyrophosphate, pH 9.0, at 121 °C in three extraction cycles. Extracts were pooled and quantified by using the Bradford protein assay. Concentrations of GRSP and total carbon (C) in aggregates were linearly related across aggregate size classes for all treatments (GRSP = 0.101C + 0.56, r² = 0.95). No tillage had significantly greater whole soil GRSP than did CT or ORG (P = 0.01). Mean values for GRSP in aggregates of NT were higher than for CT or ORG aggregates by 0.53 and 0.66 mg g⁻¹ aggregates, respectively. There were no differences among treatments in GRSP concentrations in fine material. In NT the concentration of GRSP increased as aggregate size increased in contrast to the disturbed treatments, CT or ORG, where there were no differences in GRSP concentration across aggregate size fractions. Larger proportions of GRSP were distributed in macroaggregates of NT compared to CT and ORG in contrast to larger proportions in microaggregates of CT and ORG than in NT. Although soil disturbance in ORG farming is greater than for CT farming, both treatments had similar GRSP concentrations and distributions.