网络驱动的协同设计三维几何模型共享技术

为解决网络驱动的协同设计三维几何模型共享技术的实现问题,提出一种基于特征流的混合式3D几何模型共享机制,提出了基于多粒度的产品几何模型数据结构描述方法和面向模型局部操作的"游历-查询"特征的历史记录来重构模型的特征建模方法。建立了网络驱动的、基于CORBA/JAVA中间插件的3D几何模型特征信息同步传输和共享平台,CORBA/JAVA平台支持多用户、分布数据管理、消息传输、网络通讯以及可扩展性,通过该平台实现了三维模型的实时传输和共享。     

Experiment for Condensing Heat Transfer Performance in a New Type of Horizontal Three Dimensional Inner Microfin Tubes

A new type of three dimenstional inner microfin tube is devoloped. Under four different pressures and in the range of condensing mass velocities from 33 to 153 kg/m2 . s,and by the experimental study of the three kinds of tubes with different microfin parameters, the performances of the condensation heat transfer for R11 in the horizontal microfin tubes and obtained. The experiments show that the inner microfin tube is a hopeful and nighty effective condensing heat transfer enhancement tube.     

Analysis of Measurement Items Composition under Bills Pricing Mode

This paper analyzes contractor's pricing connotation during bidding period with the implementation of National Standard GB50500-2003 and publish of document JB \206,expatiates the contents of measurements during construction period.Considering the problems derived from expenses of measurements during accounts settlement stage,a classified management method according to the characteristics of these measurements is put forward,and one step further,the rational pricing method of measurement items during the bidding period is suggested.     

观赏羽衣甘蓝的离体繁殖

以花蕾为外植体，离体繁殖羽衣甘蓝８个杂各一代材料。培养基为（ｍｇ／Ｌ）：ＭＳ＋ＢＡ１－２＋ＮＡＡ０．１－０．２＋ＩＡＡ０．５＋（或不加）ＧＡ３０．３＋３％蔗糖。平均１８％－６７％的接咎花蕾产生不定芽；药有３０％的不定芽发育成完整植物。培养物的严重褐化和再生植物的普遍玻璃质化是影响植株成活的主要因素。培养基中加入活性炭和青霉素，并给以强光照射，可提高植株成活率。     

大豆化学诱变育种及其规律的研究

应用化学诱变剂处理大豆种子,对M_1代植株的生育及形态均有强烈的抑制作用.M_1代所产生的形态变异主要是由于化学物质扰乱了植株生理而产生生理损伤所致.在M_2代植株各性状中以分枝数、株高、单株荚数的遗传变异系数较大,说明这些性状选择的潜力是大的,通过选择容易达到预期目标.诱变M_3代绝大多数性状仍在分离.加强选择,能选出早熟、大粒、农艺性状好、丰产的新品系.     

超细煤水浆与柴油混合液的流变特性

煤水浆(CWM)是一种新型的正在开发的可工业化的石油代用燃料。而将煤水浆用于柴油机则处于试验阶段。流变特性是煤水浆性质判定的主要依据之一。本文将就下列三方面对超细煤木浆与柴油组成的混合液(用作柴油机燃料)的流变特性进行分析:(1)流变模型和流变参量;(2)超细煤水浆与柴油的最佳混合比;(3)触变性。     

王家厂水库洪水实时预报方法及应用研究

考虑到流域降雨时空变化和流域地形、河道特征对流域产汇流的影响，应用新安江三水源产流模型、流域分散入流非线性汇流模型以及流域洪水实时预报校正模型，对王家厂流域洪水进行模拟，取得了较为满意的计算结果。     

等离子体脉冲荷电喷雾装置

设计了一套用于荷电喷雾的高压脉冲电源和等离子发生环 ,详细介绍了脉冲电源电路、电极结构和脉冲荷电喷雾系统 ,分析了脉冲电源的荷电原理 ,检测了系统的荷质比。理论分析和试验结果表明 :在同样试验条件下 ,脉冲电源优于普通直流高压电源 ,具有起晕电压低、能耗省、工作平稳、结构紧凑等特点 ,可靠、经济、实用     

Effect of water deficit in different growth stages on stem sap flux of greenhouse grown pear-jujube tree

The effects of water deficit in different fruit growth stages on the variation of stem sap flux of 6-year old greenhouse-grown pear-jujube trees were investigated. Treatments included sufficient water supply during the whole fruit-growing period (T₁), mild water deficit during the flowering–fruit setting stage (T₂), moderate water deficit during the fruit rapid growth stage (T₃) and severe water deficit during the fruit maturing stage (T₄). Results showed that significant compensation effect on stem sap flux after re-watering was observed in T₂, but not in T₃ and T₄ stages. At the end of rapid growth stage, the diurnal variation of stomatal conductance generally had a similar trend as that of stem sap flux, but with a distinct midday depression from 12:00 to 14:00 p.m. In addition, a linear relationship between the relative available soil water content (RAWC) and the ratio of daily stem sap flux to that of sufficient water treatment was observed (R² = 0.4489).     

基于MSP430F149芯片的便携式发动机窜气量测量仪的研制

介绍了在不解体车用发动机的情况下,通过测试曲轴箱窜气量的大小,即可检测活塞环与气缸壁的磨损程度的一种专用检测仪器,并以EQ6100发动机的结构特点为例,设计了专用测试用传感器,测出了其特性曲线,用低功耗单片机MSP430作为微控制器核心,构造了该测量仪器。测试结果表明:该仪器抗扰能力强,测试精度高,测试简单、方便,为发动机故障诊断提供了依据,用户可把仪器的结构、参数稍加改动即可应用于其它类型发动机的不解体故障诊断,具有一定的通用性。