Distribution of boron in wood treated with aqueous and methanolic boric acid solutions

The distributions of boron in Japanese cedar (Cryptomeria japonica D. Don) sapwood blocks treated with aqueous or methanolic boric acid [B(OH)₃] solutions were explored through Raman spectroscopy and prompt gamma-ray analysis (PGA). B(OH)₃ was the sole boron species observed in Raman spectra of the wood blocks treated with either solution. Plots of weight gain of the treated wood blocks versus boron concentration in treatment solutions were found to be linear. The results indicated that the methanolic solution makes it possible to impregnate wood with much larger amounts of boron than the aqueous solution. PGA confirmed that B(OH)₃ was highly enriched near the end grains of the treated wood blocks. Raman measurements suggested that boron content in the bulk of the wood block is not as large as expected from the weight gain of the treated wood blocks when an ordinary air-drying method is used. It was concluded that the aqueous solution impregnates the cell walls of wood with boron more easily than the methanolic solution. Part of this report was presented at the 55th (Kyoto, March 2005) and 56th (Akita, August 2006) Annual Meetings of the Japan Wood Research Society. This article follows the previous rapid communication “Analysis of boron in wood treated with boric acid solutions using Doppler broadening method of prompt gamma-rays.” J Wood Sci (2006) 52:279–281     

Sorption of Cr(VI) on the wood of Japanese larch treated with concentrated sulfuric acid

A carbonaceous sorbent was prepared from the wood of Japanese larch (Larix leptolepis) by dehydration with concentrated sulfuric acid in a 69% yield. The abilities of the sorbent to remove Cr(VI) from aqueous solutions were investigated. Research parameters included the initial solution pH, temperature, and initial concentration of Cr(VI) in solution. The removal of Cr(VI) was highly solution pH dependent and was mainly governed by physicochemical sorption under weak acidic conditions. The equilibrium data fit well in the Langmuir isotherm model. The Langmuir constants were calculated at different temperatures, and the sorption capacity increased with rising temperature, indicating the endothermic nature of the Cr(VI) sorption onto the sorbent. The desorption experiments suggest that the Cr(VI) sorption is generally irreversible, owing to strong interaction of HCrO ₄ ⁻ with the active sites of the sorbent.     

Erratum to: Regulation effect of <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis> methanol extractives on growth of seed plants

Due to a processing error, first author's name is missing in the HTML version of this article abstract page. The correct authors are given below: Jun Mu, Tohru Uehara, Takeshi Furuno The online version of the original article can be found at     

Proteins in Norway spruce thermomechanical pulp

Two methods of cytochemical staining using Coomassie dye and Cu⁺-bicinchoninic acid, respectively, showed that there are proteins in thermomechanical pulp (TMP) of Norway spruce. Protein isolated from TMP was analyzed for amino acid composition. There was about twice the amount of acidic amino acid material compared with basic amino acids, and the presence of glucosamine indicated that the isolated polypeptides also contained glycoproteins. The presence of proteins in ray cells and fiber tracheids in TMP adds to the chemical heterogeneity of the structurally complex high-yield pulp.     

The effect of ceramic coating of fire-retardant wood on combustibility and weatherability

In order to develop a fireproof wooden material, the synergic effect of fire-retardant chemicals and wood coatings was studied. The fire performance was evaluated by cone calorimeter. Impregnation of fire retardants including polyphosphatic carbamate, and ceramic coatings including alkoxy metal salt improved the fire performance of wooden materials. This treatment made it possible to meet the guidelines for fire performance of noncombustible materials in Japan. In addition to the vacuum-pressure impregnation treatment, hot-and-cold-bath impregnation treatment is an effective way to develop fire-retardant wood by impregnating fire retardant and ceramic coating. The weatherability of the developed material was also investigated. The ceramic coating was resistant to light and moisture. Part of this report was presented at 54th Annual Meeting (Sapporo, August 2004) and the 55th Annual Meeting (Kyoto, March 2005) of the Japan Wood Research Society     

Effect of thermo-mechanical refining on properties of MDF made from black spruce bark

The effects of thermo-mechanical refining conditions on the properties of medium density fiberboard (MDF) made from black spruce (Picea mariana) bark were evaluated. The bark chips were refined in the MDF pilot plant of Forintek Canada Corporation under nine different refining conditions in which preheating retention time was adjusted from 3 to 5 to 7 min and steam pressure was set at either 0.6, 0.9 or 1.2 MPa. The resulting bark fibers were blended with 12% UF resin (based on oven-dry fiber weight) using a mechanical blender. The resinated fibers were manually formed into fiber mats and hot-pressed into MDF panels using consistent parameters. Two panels for each refining condition were produced, resulting in a total of 18 panels. Analysis of variance (ANOVA) was used to analyze the significance of factors. Regression coefficients and 3D contour plots were used to quantify the relationship between panel properties and the two test factors. The results from this study indicated that the preheating retention time was a significant factor for both modulus of rupture (MOR) and modulus of elasticity (MOE), the steam pressure was a significant factor for internal bond strength (IB), MOR and MOE, whereas both factors were insignificant for thickness swelling, water absorption and linear expansion. The properties of MDF panels were quadratic functions of retention time and steam pressure. Compared to the ANSI standard for 120-grade MDF, most panels with a nominal density of 950 kg/m³ had very high IB (>1 MPa) and acceptable MOR, MOE and dimension stabilities. These results suggest that black spruce bark residues can be considered as a potentially suitable raw material for manufacturing MDF products.     

Response of <Emphasis Type="Italic">Pinus pseudostrobus</Emphasis> Lindl. to fertile growing medium and tephra-layer depth under greenhouse conditions

Major disturbances that remove vegetation cover create conditions that differ greatly from those in adjacent forests. In volcanic areas, tephra deposition can be a major disturbance that eliminates vegetation cover and creates a barrier for plant establishment. The eruption of the Paricutín volcano, in Michoacán, México, from 1943 to 1952, created large tephra deposits adjacent to forest stands. Many of these deposits still lack native vegetation and understanding of the limiting factors for establishment of native tree species is necessary to restore these areas. Pinus pseudostrobus early growth in response to the amount of fertile growing medium on top of a variable-depth tephra layer was evaluated in a greenhouse experiment. Increasing amounts of fertile growing medium increased height of 28-week-old plants (no growing medium = 5.5 cm tall ±1.8 cm, 3 cm of growing medium = 21.2 ± 4.6 cm and 6 cm of growing medium 24.8 ± 4.4 cm). Other variables showed the same trend (diameter, number of fascicles, belowground biomass and aboveground biomass). Our results suggest that P. pseudostrobus establishment in tephra covered areas will depend on the accumulation of a fertile layer of more than 3 cm in thickness.     

Dielectric properties of copper-ethanolamine treated Chinese fir (Cunninghamia lanceolata Hook.)

In order to clarify the interaction between copper and wood substances in wood treated with copper containing water-borne wood preservatives, the dielectric constant ε′ and dielectric loss factor ε″ of untreated wood and wood treated with four concentration levels of copper-ethanolamine (Cu-EA) solutions were determined within a temperature range from –100 to 40°C and a frequency range from 100 to 1 MHz. Three dielectric relaxation processes were observed in the ε″ spectrum; among them R-I is based on the reorientation of methylol groups in the amorphous region of wood cell walls and R-II is related to wood extractives. R-III appeared in Cu-EA treated wood, and its magnitude decreases with the concentration of Cu-EA solutions used in this experiment. This relaxation process was considered to be based on the reorientation of copper-ethanolamine-wood complexes in wood cell walls. At low copper retention, the hydrogen in the complex can form hydrogen bonding with adjacent hydroxyl groups, which results in a strong bonding state between copper and wood; at high copper retention, the numerous copper-ethanolamine complexes not only hinder them from forming hydrogen bonding with adjacent wood molecules due to steric hindrance, but also weaken the interaction between wood molecules themselves, which corresponds to reducing ε″ values of both R-I and R-III processes. The results explain the fact of in-creasing copper leaching in wood treated with high concentration copper-based water-borne preservatives.     

Host selection of small cedar longicorn beetle, <Emphasis Type="Italic">Callidiellum rufipenne</Emphasis> (Coleoptera:Cerambycidae), on Japanese cedar, <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, in terms of bark water content of host trees

We caught the adults of a secondary wood-boring insect, Callidiellum rufipenne (Motschulsky), on Japanese cedar, Cryptomeria japonica D. Don., trees and logs with manipulated bark water contents to clarify the mechanism of host selection by C. rufipenne. More C. rufipenne were trapped when the bark water content range was ca. 120–200%. Fewer C. rufipenne were trapped at higher and lower bark water contents. These findings indicate that C. rufipenne adults do not simply select weakened or dying trees. Bark water content is one of important factors for C. rufipenne choosing their host for oviposition.     

Screening of extracts of Japanese woods for melanin biosynthesis inhibition

The effects of 120 methanol extracts prepared from bark and heartwood of 69 types of Japanese wood on the melanin production of B16 melanoma cells were examined. The melanin content of B16 melanoma cells was determined spectrophotometrically at 405nm. The extracts were also examined for their effects on cell viability. We found that the methanol extracts of Fagus crenata (buna, wood, 100μg/ml), Sapium sebiferum (Nankinhaze, wood, bark, 10μg/ml), and Zelkova serrata (keyaki, wood, 10μg/ml) greatly inhibited the melanin production of B16 melanoma cells without significant cytotoxicity. However, these extracts did not inhibit tyrosinase activity at the concentration of 100μg/ml. These findings indicate that the depigmenting mechanism of these extracts involves the suppression of some pigmenting signals in stimulating melanogenesis rather than the inhibition of tyrosinase activity. Part of this study was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, Japan, March 2003