Erratum to: Regulation effect of <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis> methanol extractives on growth of seed plants

Due to a processing error, first author's name is missing in the HTML version of this article abstract page. The correct authors are given below: Jun Mu, Tohru Uehara, Takeshi Furuno The online version of the original article can be found at     

Chemical characterization of smoke from the production process of wood-plastic composites

The chemical composition of unpleasant smell, emitted from the production process of wood-plastic composites using Manchurian ash sawdust (Fraxinus mandschurica Rupr.) and polypropylene powder as the raw material, was investigated. Wood sawdust and polypropylene powder were subjected to heat treatment to 290°C during 8 min (the conditions were similar to those employed on an industrial scale). The emitted compounds were collected and analyzed by gas chromatography-mass spectrometry (GC-MS). The analytical r...     

A NMR study of water distribution in hardwoods at several equilibrium moisture contents

The water state of one tropical (Robinia coccinea) and two temperate (Acer saccharum and Fagus grandifolia) hardwoods was determined at different equilibrium moisture contents (EMC) during desorption at 25°C. NMR technique was used to separate different components of water in wood. The species studied presented different structures, which were apparent on the spin–spin relaxation T₂ values. Three different water components were separated: slow T₂ (liquid water in vessel elements), medium T₂ (liquid water in fiber and parenchyma elements) and fast T₂ (bound or cell wall water). The NMR results showed that even at equilibrated conditions a region exists where loss of liquid water and bound water takes place simultaneously. This region will vary according to the wood structure. Finally, liquid water was present at EMC lower than the fiber saturation point, which contradicts the concept of this point when considered as a bulk property of wood.     

Distribution of boron in wood treated with aqueous and methanolic boric acid solutions

The distributions of boron in Japanese cedar (Cryptomeria japonica D. Don) sapwood blocks treated with aqueous or methanolic boric acid [B(OH)₃] solutions were explored through Raman spectroscopy and prompt gamma-ray analysis (PGA). B(OH)₃ was the sole boron species observed in Raman spectra of the wood blocks treated with either solution. Plots of weight gain of the treated wood blocks versus boron concentration in treatment solutions were found to be linear. The results indicated that the methanolic solution makes it possible to impregnate wood with much larger amounts of boron than the aqueous solution. PGA confirmed that B(OH)₃ was highly enriched near the end grains of the treated wood blocks. Raman measurements suggested that boron content in the bulk of the wood block is not as large as expected from the weight gain of the treated wood blocks when an ordinary air-drying method is used. It was concluded that the aqueous solution impregnates the cell walls of wood with boron more easily than the methanolic solution. Part of this report was presented at the 55th (Kyoto, March 2005) and 56th (Akita, August 2006) Annual Meetings of the Japan Wood Research Society. This article follows the previous rapid communication “Analysis of boron in wood treated with boric acid solutions using Doppler broadening method of prompt gamma-rays.” J Wood Sci (2006) 52:279–281     

Effect of thermo-mechanical refining on properties of MDF made from black spruce bark

The effects of thermo-mechanical refining conditions on the properties of medium density fiberboard (MDF) made from black spruce (Picea mariana) bark were evaluated. The bark chips were refined in the MDF pilot plant of Forintek Canada Corporation under nine different refining conditions in which preheating retention time was adjusted from 3 to 5 to 7 min and steam pressure was set at either 0.6, 0.9 or 1.2 MPa. The resulting bark fibers were blended with 12% UF resin (based on oven-dry fiber weight) using a mechanical blender. The resinated fibers were manually formed into fiber mats and hot-pressed into MDF panels using consistent parameters. Two panels for each refining condition were produced, resulting in a total of 18 panels. Analysis of variance (ANOVA) was used to analyze the significance of factors. Regression coefficients and 3D contour plots were used to quantify the relationship between panel properties and the two test factors. The results from this study indicated that the preheating retention time was a significant factor for both modulus of rupture (MOR) and modulus of elasticity (MOE), the steam pressure was a significant factor for internal bond strength (IB), MOR and MOE, whereas both factors were insignificant for thickness swelling, water absorption and linear expansion. The properties of MDF panels were quadratic functions of retention time and steam pressure. Compared to the ANSI standard for 120-grade MDF, most panels with a nominal density of 950 kg/m³ had very high IB (>1 MPa) and acceptable MOR, MOE and dimension stabilities. These results suggest that black spruce bark residues can be considered as a potentially suitable raw material for manufacturing MDF products.     

The role of land tenure in conservation of tree and shrub species diversity in miombo woodlands of southern Malawi

Biodiversity is declining throughout southern African miombo woodlands due to poor land use practices that are detrimental to soil, vegetation and habitat. We aimed at examining tree and shrub species diversity and distribution in Uapaca kirkiana-dominated woodlands under three land tenure types; forest reserves, customary and leasehold land. The study was conducted at different forest sites within similar agroecological zone in southern Malawi. Study sites were located at a range of altitudes between 900 and 1,200 m a.s.l. Three circular plots each with 32.60 m radius were established at each study site to sample tree and shrub species composition, structure and distribution under three land tenure types. We found that forest reserves had higher species diversity with an average of 16 tree families, 27 genera and 34 species as compared to only 10 tree families, 6 genera and 6 species on customary forest lands. Comparisons of diameter at breast height size class distributions showed that customary land had significantly low numbers of small (5.0–10.0 cm) and very large (≥30 cm) diameter classes suggesting lower levels of regeneration and high rate of anthropogenic activities. The high species diversity and richness in forest reserves and leasehold land indicate high potential for protected lands to restore tree species diversity. It is concluded that levels of human activities as influenced by land tenure type reduce tree species diversity, composition and distribution at the different sites, and this confirms the hypothesis that open access lands are not compatible with conservation of tree and shrub species diversity because of high anthropogenic activities.     

窄冠黑杨窄冠黑白杨的选育(I)田间试验及结果分析

通过杂交育种，苗期选择，无性系测定，选出了6个窄冠黑杨，1个窄冠黑白杨无性系。前者生长量接近对照I-69/55和中林46，冠幅比对照小1/2—1/3，耐盐碱能力较强，容易扦插繁殖，造林成活率高。后者生长量与窄冠白杨3号相当，冠幅比窄冠白杨3号更窄，繁殖方式同一般毛白杨。两类品种均为适合于农田林网及农林间作的杨树新品种。     

杉木种子萌发期间蛋白质和游离氧基酸的变化与种子活力的关系

杉木[Cunninghama lanceolata(Lamb)Hook.]种子富含蛋白质,其含量约占种重的20％左右。蛋白质是贮藏物质之一,氨基酸又是组成蛋白质的前体。因此,贮藏蛋白质水解形成各种氨基酸的速度快慢及量的多少,必将影响新的蛋白合成,从而进一步影响胚的发育和幼苗生长。为此,我们进行了杉木种子萌发期间蛋白质和游离氨基酸变化与种子活力关系的研究。材料与方法     

Biomass production,nutrient cycling and distribution in age-sequence Chinese fir (<Emphasis Type="Italic">Cunninghamia lanceolate</Emphasis>) plantations in subtropical China

Biomass production and nutrient (N, P, K, Ca and Mg) accumulation, distribution and cycling were quantified in young, mature and over-mature (10-, 22-, and 34-year old) Chinese fir [Cunninghamia lanceolate (Lamb.) Hook] plantations in southern China. Total stand biomass of young, mature and over-mature stands was 38, 104 and 138 t ha^?1 respectively. Biomass production increased significantly with age. Stem wood represented the highest percentage of stand biomass, accounting for 41, 55 and 63 % in the young, mature and over-mature plantations respectively. Nutrients concentration was highest in live needles and branches, and lowest in stem wood. The plantations accumulated more N, followed by K, Ca, Mg, and P. Nutrient return amount, nutrient utilization efficiency, nutrient turnover time, the ratio of nutrient return and uptake increased with stand age, which implies that young Chinese fir deplete soil nutrients to maintain growth, and efficiently utilize nutrients to decrease dependence on soil nutrients as they age. Harvesting young Chinese fir plantations would therefore lead to high nutrient loss, but prolonging the rotation length could improve soil recovery, and help sustain productivity in the long-term. Improved nutrient return through litterfall as stands get older may also be beneficial to nutrient pool recovery.