生境对无芒雀麦幼穗分化进程及生殖格局的影响

以乌苏1号无芒雀麦为材料,设置2个生长环境（荒漠绿洲区、高海拔地带）,通过观测幼穗分化进程及开花习性,探究生境对无芒雀麦幼穗分化及生殖格局的影响。结果表明,无芒雀麦幼穗分化从分蘖期开始至抽穗期结束,分为初生期、伸长期、结节期、小穗原基分化期、小花原基分化期、雌雄蕊原基分化期、雌雄蕊形成期和完穗期8个时期。幼穗分化是从生长锥顶端第1枝梗原基与小花原基开始分化,相同小枝梗上原基与小花原基均是自下逐渐向上发育;整穗是从顶部向下逐渐开花,下部枝梗开花时间小于上部枝梗;小穗上的小花由下向上逐步开花。与荒漠绿洲区相比,高海拔地带的无芒雀麦幼穗分化时间晚,周期缩短,穗部赤霉素（GA）、脱落酸（ABA）及叶片可溶性蛋白含量相对较高,细胞分裂素（CTK）含量和种子千粒重较低,但高海拔地带单穗成熟种子粒数与单位面积内种子产量高,更适合无芒雀麦种子生产。     

Digital Beamforming for Unified Spread Spectrum TT&C System

In TT&C system,unified spread spectrum framework and adaptive antenna digital beamforming technologies are used to track, telemetry and command objects. Constant modulus array (CMA) and adaptive signal canceller estimate the direction of arrival (DOA) of every signal and use the optimum weighted vector to form the beams. The phase weighted vectors estimated from DOA improve the processing gain as well as being utilized in the transmitting of tele command signal to form the beam of specified object. Its processing performance is researched and simulated in this paper.     

Soft-switching Analysis Phase-Shifted-FB-ZVS-PWM DC-DC Converter With Saturable Inductor

Compared with the traditional full-bridge(FB)zero-voltage-switched(ZVS) pulsewidth-modulated(PWM) converter, the FB-ZVS-PWM converter with a saturable inductor has a wider load range with ZVS and smaller circulating energy as well as smaller duty cycle loss. By analyzing the operation principle of the converter, this paper studies design considerations of the parameter bringing about ZVS and dead time of the switch, and gives out the design method, finally simulation testing has been carried out.     

Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

Nonlinearity of Electronic Throttle and Its Control

This paper introduces the development of the electronic throttle control system (ETCS) , the structure and the principle of the system are also involved. After analyzing the nonlinearity problem existing in the mechanical structure of the system, a mathematical model of the ETCS is built up. Then three controllers (PID controller, Fuzzy controller, sliding mode controller) were designed and simulated in the matlab simulink. The result indicates that the PID controller has an overshoot,but the Fuzzy controller and the sliding mode controller can settle the nonlinearity problem better.     

Research on a Novel Inverter of VSC

In order to improve waveform performance of light HVDC system, a lot of switches which operate in high frequency are used, which causes large switching losses and results high cost. A new Buck type voltage source converter(BVSC) is proposed. The new BVSC comprises a dual-buck converter and a three-phase inverter operating in grid frequency. Only two high frequency switches are used, which results good output waveform performance. In order to reduce the high frequency switching losses, a novel improved double-frequency Buck type voltage source converter(DBVSC) is also proposed. An additional dual-Buck converter is added to the BVSC, the added dual-Buck converter deals with the fundamental power that operates in low frequency, and BVSC only deals with harmonic power that operates in high frequency. The output waveform is enhanced and the switching losses are reduced in DBVSC, and the power rating is also increased. The DBVSC is very suitable for large power rating application. The one cycle control theory is adopted to control the proposed DBVSC with analog circuit, which is very simple. The proposed DBVSC and control method are verified by simulation.     

Exploration of Implementation Strategieson Housing Building Technology

Due to the sharp contradiction between rapidly developing housing construction in small-size town and quite low technological level, in this paper, the significance of setting up integrally technological system is emphasized and the suggestion that the technology should be integrated with the sustainable development, regional context and industrialization is put forward.     

Synthetic Assessment of Power Transformer Condition Based on Matter-element Theory

Condition assessment on power transformer is an important approach to improve reliability of transformer and provide proper decision-making for condition-based maintenance. For long, static assessment method used in the past has already not adapted to the development of modem electricity transmission and distribution technology. So based on the deficiency of fuzzy synthetic assessment method, matter-element synthetic assessment method is introduced. The method can evaluate transformer condition not only in quality but also in quantity. Because each index weight can be given fairly and fast through improved analytic hierarchy process, which need not carry on consistency chec accuracy of assessment can be improved. Examples analysis has proved that assessment method of power transformer condition based on matter-element theory is rational and effective.     

Detecting System of the Dielectric Loss in Capacitive Equipment Based on Virtual Instruments

A digital detecting system of the dielectric loss in the capacitive equipment is introduced based on virtual instruments.This system can real-time collect,analyze,process and storage electrical signals with National Instruments' program LabVIEW and ADLINK,s DAQ board.Through the simulation test in lab and the real test in electric substation,it is shown that this system has high accuracy on testing the dielectric loss in the capacitive equipment,the real test data is stable and the relative error of real dielectric loss is less than 5%.It is to say that this system can meet the requirement of the real on-line monitoring.