Hydraulic Retention Time Influence on Improving Flocculation in the Activated Sludge Processes Through Polyelectrolytes

Hydraulic retention time (HRT) influence improving sludge flocculation with adding the polyelectrolytes (non-ionic, anionic, and cationic) was studied on an activated sludge (AS) system fed with synthetic domestic wastewater (SDW), dairy industry wastewater (DIW), and caramel industry wastewater (CIW). The sludge volumetric index, food/microorganism ratio (F/M), and mixed liquor volatile suspended solids at different HRTs (6, 8 and 10 h) were monitored on an experimental model. Results showed that both SDW and IW had the best sludge flocculation conditions at 8 h and 100 mL of non-ionic polyelectrolyte (0.2 mg L^?1). In addition, this phenomenon reached the organic matter removal efficiencies of 95.9, 95.7, and 94.2% for SDW, DIW, and CIW, respectively. Therefore, optimum HRT increased the organic matter removal efficiencies by 10%, sludge concentration by 37% (22–55%), and F/M ratio by 70%. Moreover, the polyelectrolytes used in AS improved the sludge flocculation by 2.9 times.     

Comparison of larval thermal maxima between <Emphasis Type="Italic">Fundulus heteroclitus</Emphasis> and <Emphasis Type="Italic">F. grandis</Emphasis>

Fundulus heteroclitus and F. grandis are resident salt marsh fishes that overlap in distribution over a narrow range in northeastern Florida. The objective of the present study was to examine whether the limits of the species’ ranges could be explained by differences in thermal tolerance. Two populations of each species were collected and then spawned in the laboratory, and 9-day-old larvae were used for critical thermal maxima trials. Mean LOE temperatures of larvae ranged from 43.04 to 43.65°C and showed little difference between species. Therefore, differences in high temperatures experienced cannot account for the differences of the distributions of the two species. Condition-specific competition may play a greater role in determining the observed range of the two species.     

Lithic soils in the semi-arid region of Brazil: edaphic characterization and susceptibility to erosion

Soils(Leptosols or Epileptic Regosols)with lithic contact at a depth of 50 cm occupy almost 20%of the Brazilian semi-arid region.These lithic soils are susceptible to erosion due to faster saturation of water-holding capacity during rainfall,which accelerates the beginning of runoff.However,erosion traits of lithic soils in the semi-arid region of Brazil are less studied.The aim of this study was to characterize the soil and landscape attributes in areas with Neossolos Litólicos(Entisols)in the Caatinga biome to identify region of high susceptibility to erosion.Results showed that the soils were characterized by a sandy texture,soil structure with poor development and low content of organic carbon.These attributes increase susceptibility to erosion and reduce water storage capacity,especially in the states of Cearáand Sergipe.In these states,the content of rock fragments in the soil reaches 790 g/kg.High contents of silt and fine sand,high silt/clay ratio,predominance of Leptosols and strong rainfall erosivity were observed in Piauíand northwestern Ceará.A very high degree of water erosion was observed in the states of Pernambuco and Paraíba.Despite the low degree of erosion observed in the state of Bahia,it is highly susceptible to erosion due to the predominance of very shallow soils,rugged relief and high values of rainfall erosivity.Lower vulnerability was observed in the state of Alagoas because of its more smoothed relief,greater effective soil depth,thicker A horizon of soil and lower rainfall erosivity.In general,the characteristics that intensify the susceptibility to erosion in the Caatinga biome are those soil structures with poor development or without aggregation,low contents of organic carbon,high contents of silt and fine sand,high values of silt/clay ratio and rugged relief in some regions.This study collected information contributing to a better characterization of soils with lithic contact in the semi-arid region of Brazil.In addition,regions with a higher susceptibility to erosion were identified,revealing insights that could help develop strategies for environmental risk mitigation.     

Factors affecting the adoption of agroforestry practices by farmers in Cameroon

This paper presents empirical evidence on the impact of socio-economic factors on the adoption of agroforestry practices in Cameroon. The analysis uses primary farm-level data collected from June to December 1996. Three major provinces of the country were covered, namely Centre, Southwest and Northwest Several agroforestry technologies have been promoted among farmers in the zone, including alley farming, improved fallow, live fencing, cut-and-carry fodder and apiculture. The status of adoption of each agroforestry practice is described and factors that affect adoption identified. These are gender of farmer, household family size, level of education, farmer’s experience, membership within farmers’ associations, contact with research and extension, security of land tenure, agroecological zone, distance of the village from nearest town, village accessibility and income from livestock. Research findings indicate that since factors affecting farmers’ adoption of agroforestry practices differ across techniques, generalisation is to be avoided.     

Timing and temperature thresholds of heat stress effects on fertility performance of different parity sows in Spanish herds

High temperature is an environmental factor that impairs sow fertility. In this study, we identified the critical weeks for heat stress effects on aspects of fertility performance, namely weaning-to-first-service interval (WSI) and farrowing rate (FR). We also examined the threshold temperatures above which the fertility performance deteriorated and whether there were any differences between parities regarding heat stress effects or thresholds. Performance data of sows in 142 herds from 2011 to 2016 were matched to appropriate weekly averaged daily maximum temperatures (T_max) from weather stations close to the herds. Two types of ratios (i.e., ratio for WSI and odds ratio for FR) were used to identify the critical weeks for heat stress by comparing the respective measures for two sow groups based on T_max in different weeks around weaning or service events. The ratios for WSI were calculated between groups of sows exposed to T_max ≥ 27 °C or <27 °C in each week before weaning, with the T_max cutoff value based on a recent review study. Similarly, the odds ratios for FR for the two groups were calculated in weeks around service. The weeks with the largest differences in the fertility measures between the two T_max groups (i.e., the highest ratio for WSI and the lowest odds ratio for FR) were considered to be the critical weeks for heat stress. Also, piecewise models with different breakpoints were constructed to identify the threshold T_max in the critical week. The breakpoint in the best-fit model was considered to be the threshold T_max. The highest ratios for WSI were obtained at 1 to 3 wk before weaning in parity 1 and 2 or higher sow groups. The threshold T_max leading to prolonged WSI was 17 °C for parity 1 sows and 25 °C for parity 2 or higher sows. Increasing T_max by 10 °C above these thresholds increased WSI by 0.65, and 0.33 to 0.35 d, respectively (P < 0.01). For FR, the lowest odds ratios were obtained at 2 to 3 wk before service in parity 0, 1, and 2 or higher sow groups. The threshold T_max leading to reductions in FR was 20, 21, and 24 to 25 °C for parity 0, 1, and 2 or higher sow groups, respectively. Increasing T_max by 10 °C above these thresholds decreased FR by 3.0%, 4.3%, and 1.9% to 2.8%, respectively (P < 0.01). These results indicate that the critical weeks for heat stress were 2 to 3 wk before service for FR and 1 to 3 wk before weaning for WSI. The decreases in fertility performance in parity 0 to 1 sows started at temperatures 3 to 8 °C lower than in parity 2 or higher sows.     

Influence of storage time and processing on chemical composition and in vitro ruminal fermentation of olive cake

Olive oil extraction generates olive cake (OC) that could be used in ruminant feeding. However, the chemical composition of OC is affected by multiple factors, being therefore highly variable. The objective of this study was to analyse the influence of storage time and further processing: crude, exhausted (subjected to a second oil extraction) and cyclone (obtained from a cyclone separator) on nutritive value of OC samples. Twelve samples (six crude and six exhausted) were obtained monthly from the same pond from 1 to 6 storage months, and nine samples (three crude, three exhausted and three cyclone) were obtained monthly from a different pond from 6 to 9 months storage. Chemical composition was analysed, and OC samples were fermented in vitro with sheep rumen fluid. Increasing storage time up to 6 months decreased sugars and total soluble polyphenols content but increased fibre content in OC. Dry matter effective degradability (DMED) decreased linearly (p < 0.001) by 35.9 and 45.5% as storage time augmented from 1 to 6 months for crude and exhausted OC, respectively. Crude OC had lower DMED values than exhausted OC (averaged values 0.255 and 0.294 g/g, respectively). Both potential production and rate of gas production were lower (p ≤ 0.018) in crude compared with exhausted OC, which was attributed to the high fat content of crude OC (≥86 g/kg dry matter). For samples stored longer than 6 months, cyclone had greater (p < 0.05) DMED than crude and exhausted OC (averaged values 0.207, 0.164 and 0.164 g/g, respectively). The results indicate that ruminal degradability of OC is reduced with advancing storage time, but only subtle changes were observed during the first two months. Cyclone showed greater degradability than crude and exhausted OC, but differences between crude and exhausted OC became negligible after five storage months.     

Acute toxoplasmosis in squirrel monkeys (Saimiri sciureus) in Mexico

Toxoplasma gondii causes fatal multisystemic disease in New World primates, with respiratory failure and multifocal necrotic lesions. Although cases and outbreaks of toxoplasmosis have been described, there are few genotyping studies and none has included parasite load quantification. In this article, we describe two cases of lethal acute toxoplasmosis in squirrel monkeys (Saimiri sciureus) of Mexico city. The main pathological findings included pulmonary edema, interstitial pneumonia, hepatitis and necrotizing lymphadenitis, and structures similar to T. gondii tachyzoites observed by histopathology in these organs. Diagnosis was confirmed by immunohistochemistry, transmission electron microscopy and both end point and real time PCR. The load was between <14 and 23 parasites/mg tissue. Digestion of the SAG3 gene amplicon showed similar bands to type I reference strains. These are the first cases of toxoplasmosis in primates studied in Mexico, with clinical features similar to others reported in Israel and French Guiana, although apparently caused by a different T. gondii variant.     

Synergistic effects of Miconazole and Polymyxin B on microbial pathogens

The therapeutic value of antibiotics depends on the susceptibility of the infecting microorganism and the pharmacological profile of the drugs. To assess the value of an antibiotic combination of polymyxin B and miconazole this study examined the in vitro synergistic potential of the two drugs on Gram-negative and Gram-positive bacteria and yeast. Antifungal and antibacterial activity was tested by minimum inhibitory concentration (MIC) of broth macrodilution and urea broth microdilution, by fluorescence microscopy and flow cytometry. Synergism was calculated using the fractional inhibitory concentration index (FICi). With Staphylococcus intermedius as target we found up to an eightfold reduction of the individual MICs when both drugs were combined. However, the FICi was 0.63 suggesting no real interaction between the two drugs. With Escherichia coli, Pseudomonas aeruginosa, and Malassezia pachydermatis as targets the antimicrobial drug combination reduced the MICs of polymyxin B and miconazole from fourfold to hundredfold resulting in FICi between 0.06 and 0.5 which defines a synergistic action. Thus, if polymyxin B and miconazole are combined their effect is greater than the sum of the effects observed with polymyxin B and miconazole independently, revealing bactericidal and fungicidal synergism. Our results indicate a strong therapeutic value for the combination of these antimicrobial agents against Gram-negative bacteria and yeast and a weaker value against Gram positive bacteria for clinical situations where these pathogens are involved.