Drug-induced thrombocytopenia

A variety of drugs may cause thrombocytopenia. Although it occurs more often than drug-induced anemia it is less well understood because techniques for studying drug-platelet-immune interactions have been unavailable until recently. The mechanisms by which drugs cause thrombocytopenia are varied. Bone marrow suppression or increased peripheral destruction of platelets could be involved. Nonimmunologic as well as immunologic mechanisms may also occur. These different mechanisms of drug-induced thrombocytopenia are reveiwed. Diagnostic methods and treatment are also summarized.     

监测饲料及其原料以消除霉菌毒素的影响

由于霉菌毒素是一类无色无臭无味的物质,所以测定饲料原料和饲料成品以监测霉菌毒素的污染是非常重要的. 霉菌毒素这一术语源自希腊语单词"mycos"和"toxikon",是指在各种各样环境条件下由真菌产生的次生有毒代谢产物.     

Chemical modification and wetting of medium density fibreboard panels produced from fibres treated with maleated polypropylene wax

Medium density fibreboard (MDF) was produced from fibres treated with maleated polypropylene wax. The objectives of this study were to investigate the effect of fibre treatment with maleated polypropylene wax on the advancing and receding contact angle and wicking of MDF panels by the Wilhelmy plate method; to verify the chemical reactions occurring between fibres and maleated polypropylene wax by infrared spectroscopy, and to verify if there are relationships with the water absorption of panels. Three maleated polypropylene wax contents (0, 3, 5%) and two resin types (urea–formaldehyde, UF and melamine–urea–formaldehyde, MUF) were considered in this study. Our results showed that the treatment increased the advancing contact angle of panels bonded with UF resin. The receding contact angles of MDF panels produced from treated fibres with 5% maleated polypropylene wax content were also increased by the treatment. Also, the wicking was reduced by the treatment independent of the maleated polypropylene wax content. Reductions of the wicking were 59% for panels bonded with UF resin and 73% for panels bonded with MUF. Relationships between the wicking and water absorption were observed. Chemical analysis realized by infrared spectroscopy did not detect the presence of an esterification reaction between wood fibres and anhydride groups of the maleated polypropylene wax. This suggests, therefore, that an esterification reaction did not take place or that chemical modifications were so small that they are not visible by infrared spectroscopy.     

The effects of temperature and humidity on phenol-formaldehyde resin bonding

Summary The effects of temperature and relative humidity on phenol-formaldehyde resin bonding were evaluated. Two flakes in a lap-shear configuration were bonded under an environment of controlled temperature (110 °C, 120 °C, 130 °C, 140 °C) and relative humidity (41%, 75%, 90%) for a series of time periods (0.25 to 16 min). The lap-shear specimens were then shear-tested on a mechanical testing machine and the results were used to establish a family of bond strength development curves at each temperature and level of relative humidity. At 110°C, the higher relative humidity appeared to retard resin bonding. The effects of relative humidity diminished as temperature increased to 140 °C. Bond strength development was chemical ratecontrolled. The rate of bond strength development at each relative humidity follows a first order reaction mechanism. The activation energy of resin-wood bonding, determined by bonding kinetics, was higher than that of resin alone, determined by differential scanning calorimetry. This comparison indicates that to form a strong resin-wood bond, a higher energy level might be required.This material is based on work supported by the Ministry of International Affairs, Quebec Government, the Natural Sciences and Engineering Research Council of Canada, and Laval University (Quebec City). The work was also supported by the U.S. Department of Agriculture under research joint venture agreement FP-92-1835     

Tracking leaf area index and coefficient of light extinction over the harvesting cycle of black wattle

The amount of photosynthetic radiation intercepted by a crop is a function of the incident solar radiation on the plants, the leaf area index (L _AI), and the light extinction coefficient (k). We quantified L _AI and k in stands of black wattle (Acacia mearnsii De Wild.) over a 7-year growth cycle at two locations in the state of Rio Grande do Sul, Brazil. Our study was conducted in commercial stands in agroecological regions with high densities of black wattle plantations. L _AI was calculated as the ratio between the leaf area of a tree and its planting space, and k was derived from Beer’s law. L _AI depends on the planting site and stand age. Between the two sites, the L _AI was similar over time, the amount of variation differed. Values of k depended only on stand age, with the highest average observed for stands up to 5 years old. The trend of k during the plantation cycle was inversely proportional to L _AI and was correlated with L _AI, leaf area, leaf dry mass, canopy volume, height, branches dry mass, total dry mass, and crown diameter.     

Characterization of urea–formaldehyde resin penetration into medium density fiberboard fibers

The amount of UF resin penetration into fibers, used for the production of medium density fiberboard (MDF), is unknown. To evaluate the relationship between resin viscosity and resin penetration depth, an experimental procedure involving confocal laser scanning microscopy (CLSM) and a Toluidine Blue O staining system was performed. The results indicate that CLSM in combination with a Toluidine Blue O staining system is a good way to characterize UF resin penetration into wood fibers. The main penetration direction is toward the fiber lumen. For wet fibers, whose moisture content is about 88%, the effect of resin viscosity with a range of 80 cps – 340 cps on penetration is very similar, with all adhesives reaching or almost reaching the fiber lumen after 60 min at room temperature. For MDF industrial samples, the highest depth of penetration of the adhesive was attained in the second dryer stage. After the second dryer stage, the resin penetration into the fiber did not increase.     

Long-term prospective evaluation of intestinal anastomosis using stainless steel staples in 14 dogs

This prospective clinical study evaluated the use, complications, and clinical and ultrasonographic follow-ups of end-to-end intestinal anastomoses with skin staples in naturally occurring diseases in canine small and large intestines. Intestinal anastomoses were performed in 14 dogs and pre-, peri-, and postoperative data were recorded. Postoperative clinical and ultrasound evaluations were performed at regular intervals for 1 year. The mean time taken to construct the anastomosis was 5 min. There were no intraoperative complications. Hemorrhage and colonic stricture were the main postoperative complications. Staple loss occurred in 2 cases. Absence of wall layering and focal wall thickening were observed in all cases at each ultrasonographic follow-up. Hyperechoic fat was observed in all but 1 of the cases at month 1. Nine dogs were alive with normal digestive function at the end of the study. The skin stapler technique enabled rapid construction of consistent anastomoses with inexpensive stapling material.     

Effect of gamma and e-beam radiation on the essential oils of Thymus vulgaris thymoliferum, Eucalyptus radiata, and Lavandula angustifolia

The microbiological contamination of raw plant materials is common and may be adequately reduced by radiation processing. This study evaluated the effects of gamma- and e-beam ionizing radiations (25 kGy) on three plants used as food or as medicinal products (Thymus vulgaris L., Eucalyptus radiata D.C., and Lavandula angustifolia Mill.) as well as their effects on extracted or commercial essential oils and pure standard samples. Comparison between irradiated and nonirradiated samples was performed by GC/FID and GC/MS. At the studied doses, gamma and e-beam ionizing radiation did not induce any detectable qualitative or quantitative significant changes in the contents and yields of essential oils immediately after ionizing radiation of plants or commercial essential oils and standards. As the maximum dose tested (25 kGy) is a sterilizing dose (much higher than doses used for decontamination of vegetable drugs), it is likely that even decontamination with lower doses will not modify yields or composition of essential oils of these three plants.     

Short-term baths with essential oils of Lippia sidoides,Ocimum gratissimum and Zingiber officinale influence blood parameters and survival of tambaqui (Colossoma macropomum) after infection with Aeromonas hydrophila

This study evaluated the effect of short-term baths with the essential oils (EOs) of Lippia sidoides, Ocimum gratissimum and Zingiber officinale on the survival, haematological, biochemical and histopathological parameters of native fish tambaqui (Colossoma macropomum), challenged with Aeromonas hydrophila. After challenge, the fish infected with A. hydrophila received therapeutic baths of 60 min, for five consecutive days. Treatments were as follows: challenged and not treated; challenged and treated with 10 mg L^?1 of gentamicin; challenged and treated with EO of L. sidoides (2.5 and 5.0 mg L^?1); challenged and treated with EO of O. gratissimum (5.0 and 10.0 mg L^?1); challenged and treated with Z. officinale EO (5.0 and 10.0 mg L^?1). The highest survival rates were 89.5% (fish treated with 5.0 mg L^?1 of O. gratissimum EO) and 75.0% (fish treated with 5.0 mg L^?1 of L. sidoides EO). Reductions in the haematocrit percentage, haemoglobin and erythrocyte number were observed in fish treated with L. sidoides and Z. officinale EOs compared with control fish. Mild to moderate damage to the liver tissue of fish after challenge and EO treatments were observed. It is suggested that baths containing O. gratissimum and L. sidoides EOs consist in a viable treatment to increase survival rates of C. macropomum infected with A. hydrophila.