Seasonal atopic dermatitis in dogs sensitive to a major allergen of Japanese cedar (Cryptomeria japonica) pollen

Three dogs were examined because of episodes of recurrent pruritic dermatitis in the spring, the season of Japanese cedar (Cryptomeria japonica, CJ) pollination in Japan. The dogs were shown to be sensitive to CJ pollen allergen using intradermal testing and antigen-specific IgE measurement. Fluorometric enzyme-linked immunosorbant assay (ELISA) showed increased concentrations of IgE specific to Cry j 1 and a negative result for Cry j 2 in the three dogs. The concentrations of IgE specific to Cry j 1 during the season of CJ pollination were higher than the concentrations found during the off-season in all the dogs, and the variation in the concentrations correlated with the variation in clinical signs. Peripheral blood mononuclear cells showed apparent proliferative responses to crude CJ pollen antigen and Cry j 1 during CJ pollination season. These findings indicated that Cry j 1 was the major allergen recognized by IgE and lymphocytes and resulted in the development of type I hypersensitivity to CJ pollen allergen in these atopic dogs.     

Bearing properties of engineered wood products I: effects of dowel diameter and loading direction

The embedment tests of laminated veneer lumber (LVL) with two moduli of elasticity (MOE; 7.8 GPa and 9.8GPa), parallel strand lumber (PSL), and laminated strand lumber (LSL) were conducted in accordance with ASTM-D 5764. The load-embedment relation for each of these engineered wood products (EWPs) was established. The directional characteristics of bearing strength (_e), initial stiffness (k _e), and effective elastic foundation depth were obtained from the tested results. The effective elastic foundation depth (=E/k _e,E = MOE), based on the theory of a beam on elastic foundation, was obtained from thek _e and MOE. An of 90° (perpendicular to the grain) was calculated by dividingE ₉₀ [MOE of 90° from the compression test, but MOE of 0° (E ₀), parallel to the grain, obtained from the bending test] byk _e90, the initial stiffness of 90°. This study aimed to obtain the bearing characteristics of each EWP, taking into consideration their anisotropic structures, for estimating the fastening strength of a dowel-type fastener. The relations between the bearing coefficients ( _e,k _e,) on the loading direction and dowel diameter were established from the load-embedment curves. Based on the results of the embedment test, tested EWPs showed different tendencies in all directions from wood and glued laminated timber.Part of this study was presented at the 49th Annual Meeting of the Japan Wood Research Society, Tokyo, April 1999     

Catalog of Micro-Tom tomato responses to common fungal, bacterial, and viral pathogens

Lycopersicon esculentum cultivar Micro-Tom is a miniature tomato with many advantages for studies of the molecular biology and physiology of plants. To evaluate the suitability of Micro-Tom as a host plant for the study of pathogenesis, Micro-Tom plants were inoculated with 16 well-known fungal, bacterial, and viral pathogens of tomato. Athelia rolfsii, Botryotinia fuckeliana, Oidium sp., Phytophthora infestans, and Sclerotinia sclerotiorum caused typical symptoms and sporulated abundantly on Micro-Tom. Micro-Tom was resistant to Alternaria alternata, Corynespora cassiicola, and Fusarium oxysporum. When Micro-Tom was inoculated with 17 isolates of Ralstonia solanacearum, many isolates induced wilt symptoms. Agrobacterium tumefaciens also was pathogenic, causing crown galls on stem tissue after needle prick inoculation. In Micro-Tom sprayed with Pseudomonas syringae pv. tomato, P. s. pv. tabaci, or P. s. pv. glycinea, bacterial populations did not increase, and yellow lesions appeared only on leaves sprayed with P. s. pv. tomato. Tomato mosaic virus, Tomato aspermy virus, and Cucumber mosaic virus systemically infected Micro-Tom, which developed symptoms characteristic of other cultivars of tomato after infection with the respective virus. These results indicated that Micro-Tom was generally susceptible to most of the important tomato pathogens and developed typical symptoms, whereas certain pathogens were restricted by either hypersensitive resistance or nonhost resistance on Micro-Tom. Therefore, an assortment of Micro-Tom–pathogen systems should provide excellent models for studying the mechanism of susceptible and resistant interactions between plants and pathogens.     

Ligand-binding characteristics of feline insulin-binding immunoglobulin G

Polyclonal immunoglobulin (Ig) G autoantibodies against insulin have been identified in sera of healthy cats. We purified and fractionated insulin-binding IgGs from cat sera by affinity chromatography and analyzed affinity of insulin-binding IgGs for insulin and their epitopes. Following the passing of fraction A, which did not bind to insulin, insulin-binding IgGs were eluted into two fractions, B and C, by affinity chromatography using a column fixed with bovine insulin. Dissociation constant (KD) values between insulin-binding IgGs and insulin, determined by surface plasmon resonance analysis (Biacore™system), were 1.64e⁻⁴ M for fraction B (low affinity IgGs) and 2e⁻⁵ M for fraction C (high affinity IgGs). Epitope analysis was conducted using 16 peptide fragments synthesized in concord with the amino acid sequence of feline insulin by an enzyme-linked immunosorbent assay. Fractions B and C showed higher absorbance (affinity) of the peptide fragment of 10 amino acid residues at the carboxyl-terminal of the B chain (peptide No. 19), followed by peptide fragments of 6 to 15 amino acid residues of the B chain (peptide No. 8). Fraction C showed a higher absorbance to 7 to 16 amino acid residues of the B chain (peptide No. 5) compared with the absorbance of fraction B. Polyclonal insulin-binding IgGs may form a macromolecule complex with insulin through the multiple affinity sites of IgG molecules. Feline insulin-binding IgGs are multifocal and may be composed of multiple IgG components and insulin.     

A bronchopulmonary artery fistula in a horse

A 24-year-old, Thoroughbred gelding presented with difficulty breathing for a few days and intermittent nose bleeding before dying. At necropsy, the bronchoesophageal artery and the bronchial artery that flowed into the left anterior lobe were tortuous and dilated, and it was found that dilated tortuous branches of the bronchial artery ran over the dorsal and ventral surfaces of the left anterior lobe. Histopathologically, an anastomosis between a muscular artery and an elastic artery were demonstrated, which were identified as bronchial and pulmonary arteries, respectively. Based on the gross and histopathological findings, a bronchopulmonary artery fistula was diagnosed. To the best of our knowledge, this is the first case report of a pulmonary vascular anastomosis in a horse.     

Characterization of an Alginate Lyase,FlAlyA, from Flavobacterium sp. Strain UMI-01 and Its Expression in Escherichia coli

A major alginate lyase, FlAlyA, was purified from the periplasmic fraction of an alginate-assimilating bacterium, Flavobacterium sp. strain UMI-01. FlAlyA showed a single band of ~30 kDa on SDS-PAGE and exhibited the optimal temperature and pH at 55 °C and pH 7.7, respectively. Analyses for substrate preference and reaction products indicated that FlAlyA was an endolytic poly(mannuronate) lyase (EC 4.2.2.3). A gene fragment encoding the amino-acid sequence of 288 residues for FlAlyA was amplified by inverse PCR. The N-terminal region of 21 residues except for the initiation Met in the deduced sequence was predicted as the signal peptide and the following region of six residues was regarded as propeptide, while the C-terminal region of 260 residues was regarded as the polysaccharide-lyase-family-7-type catalytic domain. The entire coding region for FlAlyA was subjected to the pCold I—Escherichia coli BL21(DE3) expression system and ~eight times higher yield of recombinant FlAlyA (recFlAlyA) than that of native FlAlyA was achieved. The recFlAlyA recovered in the periplasmic fraction of E. coli had lost the signal peptide region along with the N-terminal 3 residues of propeptide region. This suggested that the signal peptide of FlAlyA could function in part in E. coli.     

Effects of heat stress on the endometrial epidermal growth factor profile and fertility in dairy cows

The endometrial epidermal growth factor (EGF) profile is an indicator of uterine function and fertility in cattle. The present study aimed to investigate the effects of heat stress on the endometrial EGF profile and fertility in lactating Holstein cows. The endometrial EGF profiles of 365 cows in the Hokkaido and Kyushu regions were examined between June and September (heat stress period, n = 211) and between October and January (control period, n = 154). EGF profiles were investigated using uterine endometrial tissues obtained by biopsy 3 days after estrus (Day 3). The proportion of cows with an altered EGF profile was higher between June and September than between October and January (41.2 vs. 16.2%, P < 0.05). The effects of rectal temperature on Days 0 and 3 on the endometrial EGF profile were also assessed in cows (n = 79) between June and September in the Kyushu region. A single embryo was transferred to cow on Day 7 to evaluate fertility (n = 67). Regardless of the rectal temperature on Day 3, the proportion of cows with an altered EGF profile was higher (64.1 vs. 30.0%, P < 0.05) and the pregnancy rate after embryo transfer (ET) was lower (26.7 vs. 51.4%, P < 0.05) in cows with a rectal temperature ≥ 39.5°C on Day 0 than in cows with a rectal temperature < 39.5°C on Day 0. The present results indicate that alterations in the endometrial EGF profile induced by an elevated body temperature on Day 0 contributed to reductions in fertility in lactating dairy cows during the heat stress period.     

Development of an in vitro culture system for producing eel larvae from immature ovarian follicles in Japanese eel <Emphasis Type="Italic">Anguilla japonica</Emphasis>

To standardize conditions during the final maturation and ovulation of ovarian follicles from Japanese eel, we have developed a culture system for the production of fertilizable eggs from post-vitellogenic ovarian follicles in vitro. Post-vitellogenic ovarian follicles were incubated in culture medium supplemented with 17α,20β-dihydroxy-4-pregnen-3-one (DHP) with or without bovine serum albumin (BSA) to assess the effects of protein concentration. Eggs that ovulated during incubation were fertilized, and the remaining follicles were incubated in prostaglandin F_2α (PGF_2α) for a further 3 or 6 h before fertilization. Male eels were injected repeatedly with human chorionic gonadotropin. The quality of eggs obtained under the different culture conditions was evaluated after artificial fertilization in terms of hatching success. Hatching rates tended to decrease with increasing concentrations of BSA in the incubation medium in a dose-dependent manner. The addition of PGF_2α drastically increased the number of eggs that ovulated, but the rate of hatching was greatly decreased compared with eggs obtained earlier by DHP incubation alone. The larvae obtained from artificially fertilized eggs produced in vitro survived for 14 days without feeding. We conclude that in vitro culture systems thus have a great potential for the acquisition of good quality eggs under tightly controlled artificial conditions, culminating in the production of eel larvae.     

Development of wooden portal frame structures with improved columns

In Japan, the lifetime cycle of most housing lasts around 20–30 years. A governing factor in this respect is poor durability due to old-fashioned use of the house. As a solution of this problem, houses can be built with a skeleton structure that allows free partition of spaces by future owners. To develop the skeleton structure effectively, multistory frames with spans of 6 to 10 m are required. For this reason, attention has been focused on the behavior of multistory timber frame structures. In this article, two types of wooden portal frame structures are proposed. Both structures have improved vertical columns with short horizontal members glued in. The aim of this study was to investigate structurally effective solutions with these types of columns. The first type of the new structure changed the location of the moment-transmitting ductile connection with the improved columns. The second type of structure used an extended panel zone. Nine portal frame specimens were tested. The stiffness values were improved by around 1.7 and 3.5 times when compared with the control, and the strength was improved by around 1.25 and 1.45 times.     

Dynamic excitation and static loading tests of glulam lattice floor

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.