Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.     

Hydraulic Retention Time Influence on Improving Flocculation in the Activated Sludge Processes Through Polyelectrolytes

Hydraulic retention time (HRT) influence improving sludge flocculation with adding the polyelectrolytes (non-ionic, anionic, and cationic) was studied on an activated sludge (AS) system fed with synthetic domestic wastewater (SDW), dairy industry wastewater (DIW), and caramel industry wastewater (CIW). The sludge volumetric index, food/microorganism ratio (F/M), and mixed liquor volatile suspended solids at different HRTs (6, 8 and 10 h) were monitored on an experimental model. Results showed that both SDW and IW had the best sludge flocculation conditions at 8 h and 100 mL of non-ionic polyelectrolyte (0.2 mg L^?1). In addition, this phenomenon reached the organic matter removal efficiencies of 95.9, 95.7, and 94.2% for SDW, DIW, and CIW, respectively. Therefore, optimum HRT increased the organic matter removal efficiencies by 10%, sludge concentration by 37% (22–55%), and F/M ratio by 70%. Moreover, the polyelectrolytes used in AS improved the sludge flocculation by 2.9 times.     

Comparison of larval thermal maxima between <Emphasis Type="Italic">Fundulus heteroclitus</Emphasis> and <Emphasis Type="Italic">F. grandis</Emphasis>

Fundulus heteroclitus and F. grandis are resident salt marsh fishes that overlap in distribution over a narrow range in northeastern Florida. The objective of the present study was to examine whether the limits of the species’ ranges could be explained by differences in thermal tolerance. Two populations of each species were collected and then spawned in the laboratory, and 9-day-old larvae were used for critical thermal maxima trials. Mean LOE temperatures of larvae ranged from 43.04 to 43.65°C and showed little difference between species. Therefore, differences in high temperatures experienced cannot account for the differences of the distributions of the two species. Condition-specific competition may play a greater role in determining the observed range of the two species.     

Comparison of leaf stomatal conductance models for typical desert riparian phreatophytes in northwestern China

Stomatal regulation plays a vital role related to plant functioning, especially with a limited water supply. Estimating the leaf stomatal conductance (g _s) is pivotal for further estimation of transpiration as well as energy and mass balances between air and plant in arid regions. Based on successive measurements of leaf gas exchange of two typical desert riparian phreatophytes, Tamarix ramosissima Ledeb., and Populus euphratica Oliv., we estimated g _s using the empirical, optimal, and mechanistic models. Measurements were conducted on T. ramosissima during the growing seasons in 2011 and 2012 and P. euphratica in 2013 and 2014. Estimated values were compared with those measured by the portable open-path gas exchange measurement system. Results indicated that Ye’s mechanistic model always performed best among all the g _s models tested here with R ² values of 0.878 and 0.723 for T. ramosissima in 2011 and 2012, and 0.625 and 0.867 for P. euphratica in 2013 and 2014, respectively. Meanwhile, Medlyn’s optimal model exhibited the least reliable performance with R ² at values of 0.514 and 0.398 for T. ramosissima in 2011 and 2012, and 0.385 and 0.101 for P. euphratica in 2013 and 2014, respectively. Empirical models may not be suitable for application in novel situations because they have been developed from experimental observations rather than from any mechanistic understanding or theory of stomatal behavior. Consequently, the application of Ye’s mechanistic model will be of great significance for the modeling and up-scaling of g _s in extremely arid regions in the future.     

Loquat as a crop model for successful deficit irrigation

During three consecutive seasons, two different deficit irrigation strategies were compared with control fully irrigated trees regarding their capacity to induce early bloom and harvest in “Algerie” loquat. The first strategy, a continuous deficit irrigation strategy, consisted in a uniform reduction of 20% water needs through the entire season; the second strategy, a regulated deficit irrigation approach, while accounting for the same global reduction of 20% loquat water needs, concentrated water shortages after harvest from mid-May through the end of August. Regulated deficit irrigation resulted more successful. Postharvest regulated deficit irrigation advanced full bloom 10–20 days depending on the season. Such enhancement led to more precocious and valuable yield, with an average increase of fruit value of 0.21 € kg⁻¹. The effects of continuous deficit irrigation were less noticeable and average fruit value was increased 0.08 € kg⁻¹. Yield and fruit quality were not affected for the different deficit irrigation strategies. Water savings established around 1450 m³ ha⁻¹ year⁻¹. Deficit irrigation rose water use efficiency up to more than a 40%.     

Cobalt reduces nitrate inhibition of nodulation in mungbean (Vigna radiata)

 A cobalt-mediated decrease in ethylene production reduced the inhibition of nodulation by nitrate in Vigna radiata (mungbean). Nitrate increased the ethylene production in 5-day-old seedlings, while it caused a reduction in the nodulation status (nodule number and nodule weight) and nodule efficiency (acetylene reduction activity) in mungbean plants. The application of cobalt chloride inhibited nitrate-affected ethylene production and also decreased the inhibitory effect of nitrate on nodulation. The effect of cobalt was most marked on nodule number. Received: 6 August 1999     

Cryptic occurrence of <Emphasis Type="Italic">Chattonella marina</Emphasis> var. <Emphasis Type="Italic">marina</Emphasis> in mangrove sediments in Probolinggo,East Java Province,Indonesia

Mangrove forests and adjacent creeks are known to be highly productive estuaries, which are partly supported by benthic microalgae that grow on the sediments. During surveys investigating the microalgal floras of mangrove swamps in the eastern part of Java Island, a mud sample unexpectedly included large numbers of a notorious fish killer, Chattonella-like motile cells, and its resting cysts. These motile cells were established as clonal cultures for further identification and physiological tests. The cysts were examined through palynological and molecular biological means. Identification based on light microscopy and ribosomal RNA gene sequences confirmed that these cells and cysts were Chattonella marina var. marina. While the strains were genetically identical to the temperate strains isolated from Japan and China, temperature experiments showed that the Indonesian strains possessed a high maximum quantum yield of photosystem II even after exposure to 34 °C, a temperature at which the Japanese strain could not survive. Salinity experiments showed adaptation of the strains to a salinity of 15. These findings, together with the discovery of populations of cysts in the mangrove sediment, highlight the tough and unique nature of the Indonesian strains, which are likely adapted to wide fluctuations of temperature and salinity in mangrove swamps, and pose a potential risk to fisheries in Indonesia.     

Factors affecting the adoption of agroforestry practices by farmers in Cameroon

This paper presents empirical evidence on the impact of socio-economic factors on the adoption of agroforestry practices in Cameroon. The analysis uses primary farm-level data collected from June to December 1996. Three major provinces of the country were covered, namely Centre, Southwest and Northwest Several agroforestry technologies have been promoted among farmers in the zone, including alley farming, improved fallow, live fencing, cut-and-carry fodder and apiculture. The status of adoption of each agroforestry practice is described and factors that affect adoption identified. These are gender of farmer, household family size, level of education, farmer’s experience, membership within farmers’ associations, contact with research and extension, security of land tenure, agroecological zone, distance of the village from nearest town, village accessibility and income from livestock. Research findings indicate that since factors affecting farmers’ adoption of agroforestry practices differ across techniques, generalisation is to be avoided.