Induced Maturation and Spawning of the Chinese Catfish Clarias fuscus

Chinese catfish ( Clarias fuscus ) were successfully spawned in Hawaii using human chorionic gonadotropin (HCG) at dosage rates of two and four international units (IU) per gram body weight. Fish not injected with HCG did not produce viable eggs. Successful spawns with HCG occurred between May and October. Hatch rates of up to 80% were obtained during June, July, and August for those fish given either a 2 or 4 IU per gram body weight injection of HCG. Fish spawned in either May or October yielded significantly higher hatch rates when injected with 4 rather than 2 IU per gram body weight. Fish held at elevated temperatures (28 to 30 C) prior to the normal spawning season developed significantly larger oocyte diameters, 60 days earlier than fish held under ambient temperature conditions (21.5 to 24 C). Photoperiod manipulation at ambient temperature conditions was associated with earlier oocyte maturation, but photoperiod effects were much less important than temperature.     

The Effect of Exogenous Hormone Treatment on Spermiation in Rhynchocypris oxycephalus (Sauvage and Dabry)

For the evaluation of hormonal control of spermiation in fish, a method to quanify the spermiation response of mature Rhynchocypris oxycephalus (Sauvage and Dabry) to hormonal therapy is described. Spermatocrit was determined after 7 min centrifugation at 18,000 ± g and sperm density was estimated by a standard hemocytomer method. Sperm density can be predicted from spermatocrit since their relationship is linear as described by the regression equation, Y = 3.68X - 27.18 ( R ² = 0.82, N = 50). where Y is spermatocrit and × is sperm density. Milt production by mature R. oxycephalus was highest at 24 h after injection of 1,000 IU human chorionic gonadotropin (HCG) and 50 μg luteinizing hormone-releasing hormone analogue (LHRHa) per kg body weight. Increased milt production coincided with low spermatocrit and sperm density levels. These results demonstrate that spermiation in mature R. oxycephalus can be reliably evaluated by a spermatocrit method and that HCG and LHRHa are effective in stimulating of spermiation in this species.     

Radiographic interpretation of normal skeletal variations and pseudolesions in the equine foot.

Effective radiographic interpretation requires a veterinarian who is knowledgeable of equine limb anatomy and the various principles that affect the resulting image. The normal and its variations must be recognized and understood before the abnormal can be confidently identified as pathologic. Proper patient positioning and sound radiographic technique are mandatory if reliable diagnostic radiographs are to be produced. This review emphasizes equine foot radiographic variations of normal and pseudolesions that occur with commonly used radiographic views performed in equine practice.     

Radiographic examination of the equine foot

A complete radiographic examination of the equine foot consists of properly exposed, processed, and positioned radiographs. For radiographic interpretation, in addition to knowing radiographic signs of disease, a knowledge of normal radiographic anatomy and possible insignificant anatomic variations is necessary.     

Evaluation of host and bacterial gene modulation during Lawsonia intracellularis infection in immunocompetent C57BL/6 mouse model

BackgroundProliferative enteritis caused by Lawsonia intracellularis undermines the economic stability of the swine industry worldwide. The development of cost-effective animal models to study the pathophysiology of the disease will help develop strategies to counter this bacterium.ObjectivesThis study focused on establishing a model of gastrointestinal (GI) infection of L. intracellularis in C57BL/6 mice to evaluate the disease progression and lesions of proliferative enteropathy (PE) in murine GI tissue.MethodsWe assessed the murine mucosal and cell-mediated immune responses generated in response to inoculation with L. intracellularis.ResultsThe mice developed characteristic lesions of the disease and shed L. intracellularis in the feces following oral inoculation with 5 × l0⁷ bacteria. An increase in L. intracellularis 16s rRNA and groEL copies in the intestine of infected mice indicated intestinal dissemination of the bacteria. The C57BL/6 mice appeared capable of modulating humoral and cell-mediated immune responses to L. intracellularis infection. Notably, the expression of genes for the vitamin B12 receptor and for secreted and membrane-bound mucins were downregulated in L. intracellularis -infected mice. Furthermore, L. intracellularis colonization of the mouse intestine was confirmed by the immunohistochemistry and western blot analyses.ConclusionsThis is the first study demonstrating the contributions of bacterial chaperonin and host nutrient genes to PE using an immunocompetent mouse model. This mouse infection model may serve as a platform from which to study L. intracellularis infection and develop potential vaccination and therapeutic strategies to treat PE.     

Effects of dietary vitamin E and fat supplementation in growing-finishing swine fed to a heavy slaughter weight of 150 kg: II. Tissue fatty acid profile,vitamin E concentrations,and antioxidant capacity of plasma and tissue

The study aimed to assess the effects of vitamin E (VE) supplementation and fat source on fatty acid (FA) composition, VE concentrations, and antioxidant capacity in plasma and tissues of pigs fed to a heavy slaughter weight (150 kg). A total of 64 pigs (32 barrows, 32 gilts; 28.41 ± 0.83 kg) were blocked by sex and weight, and randomly assigned to one of eight dietary treatments (n = 8 per treatment) in a 4 × 2 factorial arrangement. Fat sources included corn starch (CS), 5% tallow (TW), 5% distiller’s corn oil (DCO), and 5% coconut oil (CN); VE supplementation levels were 11 and 200 ppm. Five-phase diets were formulated to meet requirement estimates of NRC (2012) and fed to pigs for each period of 25 kg from 25 to 150 kg. Increasing VE supplementation level increased C16:1 (P < 0.05) content but decreased C20:0 (P < 0.05) content in backfat and belly fat, while in liver, it increased C17:0 (P < 0.05) but decreased C18:0 (P < 0.05). Compared to the pigs fed the CS diet, the pigs fed the CN diet had greater (P < 0.05) content of total saturated FA, the pigs fed the DCO diet had greater (P < 0.05) content of total polyunsaturated FA content and iodine value, and the pigs fed the TW diet had greater (P < 0.05) content of total monounsaturated FA in backfat, belly fat, and liver. Plasma VE concentrations increased linearly (P < 0.05) with increasing length of feeding but faster (P < 0.05) in the pigs fed the CN and TW diets compared with the CS and DCO diets within the 200 ppm VE level; the pigs fed the DCO diet had the highest plasma VE concentrations (P < 0.05) from Phase 2 to Phase 5 within the 11 ppm VE level. The VE concentrations in liver and loin muscle (P < 0.05) increased with increasing dietary VE level from 11 to 200 ppm, but it was not affected by dietary fat source. There was no effect of VE supplementation and fat source on antioxidant capacity in plasma and liver except that pigs fed the DCO diet had greater liver SOD activity (P < 0.05) than the pigs fed the CN diet. In conclusion, dietary VE supplementation did not affect FA profile in backfat, belly fat, and liver consistently, while dietary FA composition with different fat sources affected much of the FA profile in backfat, belly fat, and liver. The higher level of VE supplementation increased liver and muscle VE concentrations and dietary fat sources affected plasma VE concentrations differently (P < 0.05), wherein the TW and CN diets increased the VE absorption greater than the DCO diet.     

Using leaf tip necrosis as a phenotypic marker to predict the presence of durable rust resistance gene pair <Emphasis Type="Italic">Lr34</Emphasis>/<Emphasis Type="Italic">Yr18</Emphasis> in wheat

Fifty wheat varieties along with Jupateco-73 and Morocco were studied for the expression of leaf tip necrosis (LTN), a trait linked with the durable rust resistance gene pair Lr34/Yr18. LTN was frequent (i.e., ≥6) in nine replications of a field experiment over 3 years in 17 genotypes, and the varieties were considered positive for LTN. In molecular analyses of these varieties, having relative severity values up to 78 for yellow rust and 45 for leaf rust, the 150-bp Lr34/Yr18-linked allele was consistently amplified. Expression of LTN in six of nine replications is an appropriate threshold for predicting the presence of Lr34/Yr18 gene pair, and genotypes can be selected using this trait.     

Rice <Emphasis Type="Italic">terpene synthase 18</Emphasis> (<Emphasis Type="Italic">OsTPS18</Emphasis>) encodes a sesquiterpene synthase that produces an antibacterial (<Emphasis Type="Italic">E</Emphasis>)-nerolidol against a bacterial pathogen of rice

Plant volatile compounds, including terpenes, are known to be involved in the rice defense system. In the present analysis of a terpene synthase, OsTPS18, in rice, we found that OsTPS18 was localized in the cytoplasm and synthesized the sesquiterpenes (E)-nerolidol and (E)-β-farnesene. The amounts of (E)-nerolidol and (E)-β-farnesene increased after jasmonic acid (JA) treatment. (E)-Nerolidol had significant antibacterial activity against Xanthomonas oryzae pv. oryzae (Xoo). These results suggest that (E)-nerolidol plays an important role in JA-induced resistance against Xoo and that it functions as an antibacterial compound in rice.     

Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.