A deep-level region-based visual representation architecture for detecting strawberry flowers in an outdoor field

Precision Agriculture - An accurate and robust strawberry flower representation and detection scheme is a key step to enable the reliable forecasting of fruit yield for use in precision...     

Time-resolved spectral studies of blue-green fluorescence of artichoke (Cynara cardunculus L. Var. Scolymus) leaves: identification of chlorogenic acid as one of the major fluorophores and age-mediated changes

Synchrotron radiation and the time-correlated single-photon counting technique were used to investigate the spectral and time-resolved characteristics of blue-green fluorescence (BGF) of artichoke leaves. Leaves emitted BGF under ultraviolet (UV) excitation; the abaxial side was much more fluorescent than the adaxial side, and in both cases, the youngest leaves were much more fluorescent than the oldest ones. The BGF of artichoke leaves was dominated by the presence of hydroxycinnamic acids. A decrease in the percentage of BGF attributable to the very short kinetic component (from 42 to 20%), in the shape of the BGF excitation spectra, and chlorogenic acid concentrations indicate that there is a loss of hydroxycinnamic acid with leaf age. Studies on excitation, emission, and synchronized fluorescence spectra of leaves and trichomes and chlorogenic acid contents indicate that chlorogenic acid is one of the main blue-green fluorophores in artichoke leaves. Results of the present study indicate that 20-42% (i.e., the very short kinetic component) of the overall BGF is emitted by chlorogenic acid. Time-resolved BGF measurements could be a means to extract information on chlorogenic acid fluorescence from the overall leaf BGF.     

Nutritive Value of Wheat Bran Diets Supplemented With Fresh Carrots and Wet Brewers’ Grains in Yellow Mealworm

We evaluated the effect of supplementation of a wheat bran (WB) diet with fresh carrots (FC) or wet brewer’s grains (WBG) on the growth performance and chemical composition of Tenebrio molitor larvae. Additionally, a digestibility trial was performed to determine the nutritional value of the raw materials used. The control diet was based on WB-only. Two other diets were formulated in which WB was supplemented with FC (FC diet) or with WBG (WBG diet). The experiment was conducted in trays (12 per treatment) and lasted 90 d. Larval weight, feed intake, and excreted feces were controlled in each tray the experiment. The digestibility trial was performed from 48 to 62 d post-hatch. Results showed digestibility coefficients of ashes, crude protein, and gross energy were significantly higher in FC diet compared with the other diets. Consequently, both digestible energy (DE) and digestible protein (DP) contents of FC were also significantly higher than those obtained for WB and WBG diets (on av. +1.12 megajoule [MJ] DE and +9.15 g DP per kg dry matter [DM]; P < 0.003). Mealworms fed FC diet showed significantly higher final weight and average daily gain than those fed the WBG diet (+12.4%), being higher in WBG than in WB diet (+3.5%). Dietary treatment did not affect DM, ashes, ether extract, and crude protein content of mealworms obtained. Some dietary effects on amino acid and fatty acid composition were observed. This study provides novel data and a unique experimental approach to assess the nutritional value of raw materials in mealworms.     

Variation of wood color parameters of Tectona grandis and its relationship with physical environmental factors

? Context

Teak??s wood color is considered an important attribute in the marketing phase and it has been influenced by environmental setting, stand conditions and management, plant genetic source, and age. However, there is a lack of understanding about how the environmental factors might affect the teak??s wood color planted in short-rotation forest plantations.

? Aims

The aim of this study is to understand the relationship, gathered from generated information, between edaphic and climatic variables and their effects in the wood color variation of Tectona grandis from trees in forest plantations.

? Methods

Twenty-two plots were grouped in five cluster sites that shared similar climatic and soil conditions. Data about soil??s physical?Cchemical properties and climatic variables were collected and analyzed. Representative trees were harvested next to each plot in order to obtain a wood sample per tree at a diameter breast height. Wood color was measured using standardized CIELab??s chromaticity system.

? Results

After comparing the wood change color index (?E*) in the five studied clusters, it was found that heartwood produced from drier and fertile sites had more yellowish-brown color. The heartwood b* color index resulted with significant correlations (R?>?0.5, P?<?0.05) among nine climatic and eight edaphic variables.

? Conclusion

It was concluded that climatic variables should be considered as the first-order causal variables to explain wood color variation. Hence, darker b* wood color was associated with dry climates; also, with deeper and fertile sites.     

Grouping of <Emphasis Type="Italic">Tectona grandis</Emphasis> (L.f.) clones using wood color and stiffness

Commercial Tectona grandis plantations using clones have attracted considerable interest for lumber production in tropical regions where small areas are frequent. However, studies on wood properties are limited. Therefore, the purpose of this study is to group clones with similar wood color characteristics using the CIELab system, and mechanical resistance by dynamic stiffness (Ed) in order to obtain different types of clones for different climate and edaphic conditions. It was found that lightness (L*), yellowness (b*), redness (a*), and Ed are similar to those found for other plantation trees. These wood characteristics are significantly influenced by clone and site. Variance due to clone and site went from 31 to 53% and from 2.95 to 24.22%, respectively. Another source of variance was distance from pith, with the exception of parameter b*, which was not affected. Finally, clones were grouped (using multivariate analysis) according to color and mechanical resistance. This analysis established 4 groups by color and 5 groups by Ed. Clone clustering will allow us to choose or use clones with similar wood properties according to site and environmental conditions increasing area production and wood quality uniformity.     

Determinants of yield in a non-timber forest product: Copaifera oleoresin in Amazonian extractive reserves

Developing sustainable extractive industries in otherwise intact tropical forest regions requires a sound understanding of the production potential of key resource populations. The oleoresin extracted from Copaifera trees is an economically important non-timber forest product harvested throughout the lowland Amazon basin. We studied oleoresin extraction from four species of Copaifera trees with known harvest histories within two contiguous extractive reserves in western Brazilian Amazonia. We conducted a large-scale experimental harvest of 179 previously unharvested Copaifera trees, in both seasonally flooded (várzea) and adjacent unflooded (terra firme) forests. The likelihood of trees yielding any oleoresin was principally determined by their species identity: C. multijuga was the only species to regularly yield oleoresin (70% of trees). Yield volumes varied both amongst species and forest types: C. multijuga (restricted to terra firme forest) had the highest mean yield of 505 ml, whilst C. guyanensis produced higher volumes of oleoresin in várzea (139 ml) than terra firme (15 ml) forest. Intraspecific differences were driven mainly by tree size. To assess extraction sustainability, we reharvested a sample of C. multijuga trees and compared the oleoresin production of 24 conspecific trees that had been initially harvested one year previously with that of 17 trees initially harvested three years previously. Reharvested trees produced just 35% of the oleoresin volume compared to that when originally drilled, but this response was not affected by the time interval between consecutive harvests. We demonstrate that, within a population of Copaifera, both morphological and environmental factors restrict total productivity; consideration of these factors should inform sustainable management practises. We additionally raise methodological considerations that may improve the comparability of studies.     

Protein and Energy Metabolism of European Seabass (<Emphasis Type="Italic">Dicentrarchus labrax</Emphasis>) Juveniles and Estimation of Maintenance Requirements

The present work aimed to study metabolic utilization of energy and protein by juvenile European seabass reared at 25 °C and to estimate maintenance requirements, based on indirect calorimetry and nitrogen excretion measurements. Duplicate groups of fish (IBW = 22 g) were fed a practical diet, for 28 days, at ration levels of 0, 0.25, 0.5, 1 and 1.5% of body weight. At the end of this period, oxygen consumption and ammonia nitrogen excretion were measured in fed and unfed fish. Weight gain linearly increased with ration level. Feed efficiency significantly increased with nitrogen intake up to 0.68 g N/kg/day. Nitrogen retention (% N intake) was positive at all feeding levels, being maximum at 0.5% BW and then decreased with increasing ration levels. There was negative energy balance at the lowest ration level and significantly increased at higher ration levels. Daily oxygen consumption (g/kg body mass) and ammonia excretion (mg N–NH₄/kg body mass) significantly increased with ration level. Heat production and heat increment of feeding (kJ/kg/day) remained low at low ration levels and significantly increased as ration level increased from 0.5 to 1.5% BW. Below maintenance, protein energy represented 34% of total energy expenditure and significantly increased to 49–56% above maintenance. Based on indirect calorimetry and ammonia excretion data, maintenance energy and protein requirements were estimated to be 56.8 kJ DE/kg/day and 1.15 g DP/kg/day, respectively. The efficiencies of energy and protein utilization were estimated to be 0.83 and 0.66, respectively.     

Interaction of contaminated sediment from a salt marsh with estuarine water: evaluation by leaching and ecotoxicity assays and salts from leachate evaporation

Purpose

Wastes from a former Portuguese steel plant were deposited between 1961 and 2001 on the riverbank of a tributary of the Tagus River creating a landfill connected to the river, posing a potential contamination risk to the Tagus estuary ecosystem. This study aims to assess the transfer of chemical elements from contaminated sediments to the estuarine water from cycles of sediment leaching so as to evaluate the ecotoxicity of the leachates, and to analyze the solid phases crystallized from those leachates.

Materials and methods

Landfill sediment and estuarine water samples were collected during low tide. Sediment samples were analyzed for pH, electric conductivity (EC), C_org, NPK, and iron oxides. Leaching assays (four replicates) were done using estuarine water (200 cm³/replicate) and 1.5 kg of sediment per reactor. Each reactor was submitted to four leaching processes (0, 28, 49, and 77 days). The sediment was kept moist between leaching processes. Sediment (total (acid digestion) and available fraction (diluted organic acid extraction-Rhizo)) elemental concentrations were determined by inductively coupled plasma–instrumental neutron activation analysis (ICP/INAA). Leachates, and estuarine and sediment pore waters were analyzed for metals/metalloids by ICP/mass spectrometry (MS) and carbonates/sulfate/chloride by standard methodologies. Ecotoxicity assays were performed in leachates and estuarine and pore waters using Artemia franciscana and Brachionus plicatillis. Aliquots of the leachates were evaporated to complete dryness (23–25 °C) and crystals analyzed by X-ray powder diffraction (XRD).

Results and discussion

Sediment with pH?=?8 and high EC and C_org was contaminated with As, Cd, Cr, Cu, Pb, and Zn. The element concentrations in the available fraction of the sediment were low compared to the sediment total concentrations (<1 % for Rhizo extraction). The concentrations of potentially hazardous elements in the estuarine water were relatively low, except for Cd. Concentrations of hazardous elements in the leachates were very low. Calcium, K, Mg, Na, and chloride concentrations were high but did not vary significantly among the four leaching experiments. Total concentrations of carbonate were much higher in leachates than in estuarine water. Both estuarine water and leachates showed negligible toxicity. Crystals identified in the solids obtained from the leachates by evaporation were halite, anhydrite, epsomite, dolomite, and polyhalite.

Conclusions

The sediment showed the capacity to retain the majority of the potentially hazardous chemical elements. Remobilization of chemical elements from sediment by leaching was essentially negligible. The variation of total concentrations of Ca, carbonate, and sulfate in leachates indicates that the sediment contained reactive sulfides. Due to its composition, the sediment seems to be a dynamic system of pollution control, which should not be disturbed.