Physiological Response of Multiple Contrasting Rice (Oryza sativa L.) Cultivars to Suboptimal Temperatures

The physiological response of multiple rice cultivars, eighteen initially and eight cultivars later on, to suboptimal temperatures (ST) conditions was investigated in laboratory and outdoor experimental conditions. Treatment with ST decreased growth in different extents according to the cultivar and affected the PSII performance, determined by chlorophyll fluorescence fast‐transient test, and stomatal conductance, regardless the experimental condition. Two groups of cultivars could be distinguished on the base of their growth and physiological parameters. The group of cultivars presenting higher growths displayed optimal JIP values, and higher instantaneous water use efficiency (WUE_i), due to a lower Gs under ST, unlike cultivars showing lower growth values, which presented worse JIP values and could not adjust their Gs and hence their WUE_i. In this work, we detected at least two cultivars with superior tolerance to ST than the cold tolerant referent Koshihikari. These cultivars could be used as parents or tolerance donors in breeding for new crop varieties. On other hand, positive and significant correlations between data obtained from laboratory and outdoor experiments suggest that laboratory measurements of most of the above mentioned parameters would be useful to predict the response of rice cultivars to ST outdoor.     

The effects of applied crop residues on losses of Fe, Mn, Cu and Zn in run-off from a soil prone to crusting

Tillage practices may reduce the organic matter content in near-surface soil horizons causing crust formation. Surface conditions may cause an increase in surface run-off, thus enhancing contaminant transfer of heavy metals or an acceleration in nutrient loss. This study examines the effect of applying crop residues to the surface of tilled soils on heavy metal losses by run-off. Losses in iron (Fe), manganese (Mn), zinc (Zn) and copper (Cu) were analysed. Run-off and sediment yield were measured on 1 m² plots using a rainfall simulator with a constant 65 mm/h intensity. Four successive rainfall applications were performed, the first three at 25 mm each and the last at 65 mm. Added corn straw varied between 0 and 4 t/ha in the five studied treatments. After 140 mm cumulative rainfall, total heavy metal losses were as follows: Fe from 137 to 950 mg/L, Mn from 2.3 to 12.83 mg/L, Cu from 0.09 to 0.72 mg/L and Zn from 0.31 to 2.46 mg/L. Dissolved fractions were as follows: Fe from 0.014 to 0.229 mg/L, Mn from 0.034 to 1.45 mg/L, Cu from 0.002 to 0.013 mg/L and Zn from 0.02 to 0.12 mg/L. Total concentrations of the studied elements decreased exponentially due to the effect of corn straw on soil loss. However, dissolved contents of Fe and Cu scarcely varied. Significant positive linear correlations were observed between total heavy metal content and soil and sediment loss by run-off. It is concluded that the addition of straw to a soil of low fertility prevents heavy metal loss.     

Artificial Insemination of Gilts with 1.5 Billion Sperms Stored in Different Periods Associated with Different Pre-ovulatory Intervals

This study evaluated the reproductive performance of gilts inseminated at three intervals before ovulation (0-12, 13-23, 24-30 h) with sperm doses (SD) stored for 0-48 and 96-120 h. A total of 218 PIC Camborough 22 gilts were inseminated once with SD of 1.5 x 10(9) sperms. Pregnant gilts (n = 166) were slaughtered 30.8 +/- 3.7 days after artificial insemination. The number of corpora lutea (CL) and total embryos (TE) was counted. Pregnancy rates (PR) were analysed by chi-square test. TE and embryonic survival (ES), obtained as the ratio between viable embryos and CL, were analysed by GLM procedure (SAS) and mean values were compared by Tukey's test. Pregnancy rate was similar among artificial insemination-ovulation (AIOV) intervals when semen was stored for 0-48 h. However, the lowest PR was observed in the 24-30 h AIOV interval with storage time (ST) of 96-120 h (p < 0.05). There was a significant effect of the interaction between ST and AIOV (p < 0.05) on TE and ES variables. Total embryos and ES did not differ (p > 0.05) among AIOV intervals in ST of 0-48 h. However, gilts inseminated at 24-30 h AIOV interval with ST of 96-120 h showed a reduction of 6.7 embryos (p < 0.05) compared with gilts in the same interval inseminated with semen stored for 0-48 h. ES for the 24-30 h AIOV interval and ST of 96-120 h was lower than that observed in the other groups (p < 0.05).     

Medical management of biological warfare and bioterrorism: place of the immunoprevention and the immunotherapy

Biological weapons are considered as mass destruction and terror weapons. Terrorism including bioterrorism is the major threat in the future conflicts for our nations. The aim of bioterrorism is more related to the potential disorganisation of the society than to the lethal effects of the agents used. The dramatic consequences cannot be discarded, especially if contagious agents such viral are used. The preparation of specific defence measures is a major challenge for our countries.

The knowledge acquired from the struggle against natural infectious diseases and recent events are essential to improve behaviours to face the biological weapon threats. The defence attitude is based on the anticipation of the threat, the management of the victims, and the restoration of the operational capabilities. This global defence attitude implies six important functions: (i) alert, (ii) detection and diagnosis, (iii) availability of pharmaceutical countermeasures such as vaccine, sera and anti-infectious medicine and products, (iv) medical management of victims, (v) training and information, (vi) research and development.

Passive and active immunoprevention and immuntherapy belong to the approaches discussed in the context of bioterrorism countermeasures. Further researches might be focused on these topics.     

Estimates of stem wood increments in forest resources: comparison of different approaches in forest inventory: consequences for international reporting: case studyof European forests

Key message

Quality and reliability of forest resource assessments depend on the ability of national forest inventories (NFIs) to supply necessary and high-quality data. Over the last decades and especially since the 1990s, the NFIs in European countries have been rapidly developing. Possibilities for obtaining reliable and accurate data on annual increment from different inventory types were evaluated, and sample-based inventories have been found to be superior to standwise inventories in providing reliable data. Simplified methods may be employed when increment cannot be directly estimated from inventory data.

Context

An increasing intensity of forest resource use requires more accurate, detailed and reliable information, not only on forest area and growing stock but also on forest stand productivity, wood increment and its components.

Aims

The main objectives were to assess the capacities of forest inventories, the methods used for estimation of gross increment and its components and their accuracy and to demonstrate an effective method for estimation of increment when direct inventory methods are not available.

Methods

Data about national forest inventory methods were obtained from 30 responses to a questionnaire, distributed amongst national correspondents of all European countries; reports of COST Actions E43 and FP 1001, databases of Temperate and Boreal Forest Resource Assessment (TBFRA) 2000 and State of Europe’s Forests (SoEF) 2011 were used as well. Analysis and comparison of results from different forest inventories were used for evaluation of data reliability. Relationships between growing stock and gross increment in European forests were also analysed, and corresponding models were proposed.

Results

Seventy-nine percent of European forest area is covered by national forest inventories (NFIs) based on sampling methods and the rest on stand-level inventory and other inventory methods. Data obtained by aggregating standwise data usually underestimate growing stock by 15–20 % and gross increment even more. Almost half of the European forest area (47 %) is monitored using permanent plots, measured twice or more, allowing the estimation of gross increment and its components to be made directly.

Conclusion

Implementation of NFIs based on sampling methods, especially with permanent plots, resulted in an improvement of data quality and in most cases an increase of growing stock and gross increment. The estimation of natural losses is the weakest link in today’s NFIs and in the current assessment of European forest resources. The proposed default values for gross increment and its components is an option to be used in countries not having NFI at all or those which have started it only recently.

     

Optimization of experimental infection protocols for the estimation of genetic parameters of resistance to White Spot Syndrome Virus (WSSV) in Penaeus (Litopenaeus) vannamei

Two infection protocols, individual oral (IO) and waterborne infection (WB), were evaluated to challenge Penaeus (Litopenaeus) vannamei with White Spot Syndrome Virus (WSSV). Five different batches of full and half-sib families were infected experimentally and tested for growth performance under commercial growth conditions. The genetic variance for WSSV resistance was estimated using a linear sire-dam repeatability model that considers test-day survival as the dependent variable. The heritability estimates using the IO protocol ranged from 0.01 ± 0.00 to 0.02 ± 0.01, whereas the heritability estimates using the WB infection protocol were not significantly different from zero. The genetic correlations measured as the product moment correlation between full-sib family breeding values for resistance to WSSV and harvest body weight in ponds were unfavourable in three of the five batches and favourable in one of them. The dosage of WSSV was better controlled with IO oral infection than with other methods, with all animals being exposed to approximately the same risk of infection at the same time. This should improve the accuracy of the genetic parameters and hence improve the accuracy of the breeding values. It should, however, be noted that once the outbreak was established and the mortalities began, the shape and the magnitude of the slope of the mortality curves showed little difference in the infection pattern between batches irrespective of the dosage and infection protocol, and in most of the cases the cumulative mortality was greater than 80%. The main reason for this is probably the high densities of animals in the tanks needed for the genetic evaluations.     

Polyunsaturated Aldehydes from Large Phytoplankton of the Atlantic Ocean Surface (42°N to 33°S)

Polyunsaturated aldehydes (PUAs) are organic compounds mainly produced by diatoms, after cell wounding. These compounds are increasingly reported as teratogenic for species of grazers and deleterious for phytoplanktonic species, but there is still scarce information regarding concentration ranges and the composition of PUAs in the open ocean. In this study, we analyzed the spatial distribution and the type of aldehydes produced by the large-sized (>10 μm) phytoplankton in the Atlantic Ocean surface. Analyses were conducted on PUAs released after mechanical disruption of the phytoplankton cells, referred to here as potential PUAs (pPUAs). Results show the ubiquitous presence of pPUA in the open ocean, including upwelling areas, as well as oligotrophic gyres. Total pPUA concentrations ranged from zero to 4.18 pmol from cells in 1 L. Identified PUAs were heptadienal, octadienal and decadienal, with heptadienal being the most common (79% of total stations). PUA amount and composition across the Atlantic Ocean was mainly related to the nitrogen:phosphorus ratio, suggesting nutrient-driven mechanisms of PUA production. Extending the range of trophic conditions considered by adding data reported for productive coastal waters, we found a pattern of PUA variation in relation to trophic status.     

Suppression of clubroot (Plasmodiophora brassicae) development in Arabidopsis thaliana by the endophytic fungus Acremonium alternatum

This study investigated the ability of an endophytic fungus Acremonium alternatum to reduce clubroot formation in the model plant Arabidopsis thaliana, which is highly susceptible to Plasmodiophora brassicae . Quantitative PCR demonstrated that A. alternatum colonized the P. brassicae -infected roots and shoots of the host plant. When Arabidopsis plants were co-inoculated with P. brassicae and A. alternatum , gall formation was reduced as shown by the reduction of the disease index (DI) by up to 50% compared to plants only infected with P. brassicae, whereas the infection rate was lowered by about 20% only in several, but not all, experiments. Clubroot was similarly suppressed when plants were inoculated with autoclaved A. alternatum spores or spore extracts, showing that viable spores were not needed. However, A. alternatum spores did not inhibit P. brassicae resting spore germination. Compared to the normal root galls, the smaller root galls on A. alternatum -inoculated plants contained fewer resting spores of the clubroot pathogen. It was thus hypothesized that inoculation with A. alternatum delayed the development of P. brassicae . Using quantitative RT-PCR to monitor the expression of P. brassicae genes differentially expressed during the development of the disease, a delayed pathogen development was corroborated. Furthermore, greenhouse experiments identified a time window in which the endophyte had to be administered, where the latest effective time point was 5 days before inoculation with P. brassicae and the optimum treatment was to administer A. alternatum and P. brassicae at the same time. These results indicate that A. alternatum and perhaps similar endophytes could be useful for the management of clubroot disease.