Growth and mortality in underplanted tree seedlings in response to variations in canopy closure of Norway spruce stands

Six broadleaved tree species and Picea abies (L.) Karst. wereplanted under spruce plantations of varying densities, in Sweden.Treatments included control (994 stems ha^–1), dense (538stems ha^–1), sparse (294 stems ha^–1) and gap (0stems ha^–1) overstory treatments. There was an increasein height and diameter growth from control to sparse overstorytreatment of all underplanted tree species except for ash (Fraxinusexcelsior L.) and Norway maple (Acer platanoides L.). Site conditionsmay have hampered the growth of these species, as well as wildcherry (Prunus avium L.). Both oak (Quercus robur L.) and sprucehad greater growth in the gap treatment, relative to the othertreatments. Insecticide application did not influence seedlinggrowth or survival. The performance of beech (Fagus sylvaticaL.), lime (Tilia cordata Mill.), spruce and oak was consistentwith shade tolerance ranking. Beech and lime had a very highsurvival rate, even under the densest canopy. The growth andmortality of ash, maple and wild cherry differed significantlyfrom what was expected. This experiment demonstrated significantvariation in interspecific growth and mortality between sevenplanted tree species in relation to canopy density. Correctsite and species selection is crucial when underplanting inshelterwood systems.     

Pesticide contamination of the upper Elbe River and an adjacent floodplain area

Journal of Soils and Sediments - Pesticide contamination of river waters is a global problem, and therefore, authorities regularly monitor the water quality status. Especially, flood events might...     

Element (Ag, Cd, Cu, Pb, Sb, Tl and Zn), element ratio and lead isotope profiles in a sediment affected by a mining operation episode during the late 19th century

Mining operations at Mårsätter in 1877–81 resulted in increased metal loading to a small lake, notably as sulphidic tailings. The event is taken as an opportunity to study the present environmental impact of a historical single major metal release. Lake water and four sediment cores were sampled and analysed for principal and trace elements in solid and aqueous phases as well as general hydrochemical conditions. Chronologies were determined from ²⁰⁶Pb/²⁰⁷Pb ratios and historical records. Ordinary sedimentation after the event has lead to that the tailings are found as a distinct layer at a depth of 18–22 cm in the sediment. The layer is characterized by elevated metal concentrations in the solid and pore water phases, respectively, circum neutral pH and sulphate concentrations below detection. Geochemical modelling indicated a preference for carbonate equilibrium in the waste while sulphides prevailed above it. It is concluded that the growth of the ordinary sediment on top of the waste has lead to a physicochemical barrier that seals of the waste from the overlying sediment. Chemical or physical rupture of the barrier will release the metals to downstream regions. According to the chronologies at least three sources have contributed to the present elevated levels of metals, in additions to the release of tailings. Copper from a historical blast furnace prior to the event at Mårsätter, transport from mineralized parts of the watershed and release of contaminated water from present mining operations maintain elevated levels of notably zinc, silver, cadmium and lead. At present less than 10% of the lead content at the sediment/water interface comes from atmospheric deposition. Increased levels of antimony and thallium were not observed prior to ca 1950.     

Bioindication and modelling of atmospheric deposition in forests enable exposure and effect monitoring at high spatial density across scales

Key message

Moss surveys provide spatially dense data on environmental concentrations of heavy metals and nitrogen which, together with other biomonitoring and modelling data, can be used for indicating deposition to terrestrial ecosystems and related effects across time and areas of different spatial extension.

Context

For enhancing the spatial resolution of measuring and mapping atmospheric deposition by technical devices and by modelling, moss is used complementarily as bio-monitor.

Aims

This paper investigated whether nitrogen and heavy metal concentrations derived by biomonitoring of atmospheric deposition are statistically meaningful in terms of compliance with minimum sample size across several spatial levels (objective 1), whether this is also true in terms of geostatistical criteria such as spatial auto-correlation and, by this, estimated values for unsampled locations (objective 2) and whether moss indicates atmospheric deposition in a similar way as modelled deposition, tree foliage and natural surface soil at the European and country level, and whether they indicate site-specific variance due to canopy drip (objective 3).

Methods

Data from modelling and biomonitoring atmospheric deposition were statistically analysed by means of minimum sample size calculation, by geostatistics as well as by bivariate correlation analyses and by multivariate correlation analyses using the Classification and Regression Tree approach and the Random Forests method.

Results

It was found that the compliance of measurements with the minimum sample size varies by spatial scale and element measured. For unsampled locations, estimation could be derived. Statistically significant correlations between concentrations of heavy metals and nitrogen in moss and modelled atmospheric deposition, and concentrations in leaves, needles and soil were found. Significant influence of canopy drip on nitrogen concentration in moss was proven.

Conclusion

Moss surveys should complement modelled atmospheric deposition data as well as other biomonitoring approaches and offer a great potential for various terrestrial monitoring programmes dealing with exposure and effects.

     

Reactivity of secondary hydroxyl groups in methylβ-d-xylopyranoside toward aβ-o-4-type quinone methide

Methyl-d-xylopyranoside was allowed to react with-O-4-type quinone methide without a catalyst to elucidate the reactivities of secondary hydroxyl groups at the C2, C3, and C4 positions. Benzyl ether-type lignin-carbohydrate complex (LCC) compounds linked at the C2 and C4 positions were predominant, at a ratio of 23. However, the reactivity of the hydroxyl group at the C3 position was quite low. These results strongly suggest that the reactivity of the C2 hydroxyl group in xylan toward quinone methide intermediate is higher than that of the C3 hydroxyl group during biosynthesis of LCCs.     

Three-dimensional imaging of a sawn surface: a comparison of confocal microscopy,scanning electron microscopy,and light microscopy combined with serial sectioning

The three-dimensional structure of a transverse sawn wood surface was investigated using several methods, to compare techniques, and to study the types of deformation in tracheids at the saw cut. A sample of spruce sapwood was cut with a fret saw across the grain. The transverse sawn surface was imaged by confocal microscopy, field emission scanning electron microscopy (FESEM), and by light microscopy combined with serial sectioning and three-dimensional (3D) reconstruction. Both confocal microscopy and FESEM were restricted to visualising the cut surface of the wood. However, serial sectioning was able to reveal the internal structure below the cut surface providing more information on the types of cell deformation present. The wood structure was deformed to depths of more than 600 μm below the surface with twisting, crushing and tearing deformations. Near the outer surface, gaps were formed between groups of tracheids where the cell walls had been torn away to form saw dust. The deformation tended to form groups of tracheids that were twisted relative to each other. Latewood was less distorted, forming a dense solid surface compared to the highly fibrous earlywood.     

ImproWin? in the treatment of gastric ulceration of the squamous mucosa in trotting racehorses

Background

Gastric ulceration is highly prevalent in horses, and there is a large commercial market for feed-additives and non-licenced products that claim effect for prevention and treatment of gastric ulceration. ImproWin® has been used as a feed additive in horses with anecdotal evidence that it may have some positive effects on gastric ulceration.The aim of this study was to investigate the effect of ImproWin® treatment on spontaneously occurring gastric ulcers of the squamous mucosa in Standardbred and Coldblooded trotting racehorses.The study was performed as a randomised, double-blinded, single centre study with stratified semi cross-over design with breed as stratification factors. The horses were clinically and endoscopically examined prior to start and after three weeks of treatment. The ulcerations were scored in accordance with Equine Gastric Ulcer Council (EGUC) recommendations on a 5 point scale and on a 10 cm Visual Analogue Scale (VAS). The patients were responder-classified after 3 weeks. Responders in need of ulcer treatment were randomly allocated to 2 or 4 weeks of additional treatment. Non-responders to placebo were crossed to ImproWin®.

Results

The 5-point EGUC score and VAS recorded score was significantly reduced (P ≤ 0.01) in both groups after 3 weeks of treatment. From 3 weeks to the end of treatment the score was further significantly reduced in the ImproWin® group (P ≤ 0.05).At the end of treatment, 78% in the ImproWin® group and 54.8% in the placebo group were classified as responders. The difference was significant (P = 0.04).

Conclusions

ImproWin® may aid the healing process of ulcers of the gastric squamous mucosa of trotters.     

Assessment of the combination of spinosad and milbemycin oxime in preventing the development of canine Angiostrongylus vasorum infections

Angiostrongylus vasorum is an increasingly reported parasite in Europe that develops in dogs after ingestion of infective third stage larvae (L3) that reside in gastropod molluscs which are needed to complete the parasite's life-cycle. Infection can produce a diversity of clinical signs, determined by involvement of the respiratory, neurological, and/or coagulation system, with a likely fatal outcome in the absence of treatment. Few drugs have been shown to reliably prevent infection, and data on treatment of infections is limited. A controlled, randomized, partially blinded laboratory study was therefore executed to evaluate the efficacy and safety of a combination tablet of spinosad/milbemycin oxime in dogs inoculated with approximately 250 A. vasorum L3. Sixteen healthy nematode free adult dogs were randomly allocated to two study groups of 8 dogs each. Thirty days post inoculation (dpi) all dogs in the fed state were treated: dogs in group B were treated with spinosad and milbemycin oxime at the dose rates of 45–60 mg/kg and 0.75–1.0 mg/kg bodyweight, respectively, approximately the lower half portion of the expected full unit dose range; dogs in group A were treated with placebo tablets. All dogs were euthanized and necropsied 56–58 dpi. The heart and lungs were examined to determine the presence of A. vasorum. All placebo group dogs were infected at necropsy with counts ranging from 22 to 98 adult worms and a geometric mean worm count of 55.2. In contrast, the geometric mean worm count in the spinosad/milbemycin oxime group was 0.7 with worm numbers ranging from 0 to 8. The results of this study demonstrate that a single treatment with the tablet combination of spinosad and milbemycin oxime administered 30 dpi provided 98.8% preventive efficacy against development of adult A. vasorum infections. Monthly treatments with spinosad and milbemycin oxime have the potential to prevent the establishment of infections with A. vasorum in dogs.     

Identifying the biological effects of pre-commercial thinning on diameter growth in young Scots pine stands

Data from seven Scots pine (Pinus sylvestris L.) stands in central Sweden that had undergone pre-commercial thinning (PCT) were used to investigate the biological effect of PCT on the diameter at breast height (DBH) growth of the remaining trees. Two treatments were considered: a PCT treatment and a control (C) with no PCT. The DBH of the trees in each stand was measured on up to four occasions over 15 years. We examined mean DBH and DBH growth of the largest 300, 600, 900 and 1200 trees ha^?1. Two methods of selecting the trees used to calculate the mean DBH values for each measurement occasion were considered: the actual mean DBH (Dma), which is based on the DBH distribution of the trees on the measurement occasion in question, and the genuine mean DBH (Dmg), which is based on the DBH distribution of the trees on the final measurement occasion of the study and therefore focuses on the same set of trees for all measurement occasions. There was no clear difference between the Dma- and Dmg-based DBH increments, but the Dmg values tended to be somewhat larger both for the C and PCT treatments. Over a 15-year period, the relative mean yearly increments (Dma/Dmg) for different tree size classes ranged from 0.91 to 0.98, with lower values for the C treatment and larger DBH size classes. We found that PCT promotes DBH growth: over a 15-year period, the increased growth amounted to about 2.0 mm year^?1 compared to the trees in unthinned plots.     

Leaching of Metals from Oxidising Sulphide Mine Tailings with and without Sewage Sludge Application

A 20-month column experiment investigated leaching of Al, Cu, Mn, Ni, Zn, Cd and Pb during sulphide oxidation in mine tailings with and without sewage sludge (SS) amendment. Leachate pH decreased gradually in all columns during the experiment, irrespective of treatment, due to sulphide oxidation. As the degree of sulphide oxidation, and thus the pH trajectory, differed between replicates (n?=?3), running data for each column used are reported separately and the relationships between sulphide oxidation, metal leaching and treatment in each column compared. Mean pH in the columns correlated negatively with total amounts of leached SO₄ ^2-. In the beginning of the experiment the leachate concentrations of Al, Cu, Zn, Ni and Pb were higher in SS-treated columns due to high initial concentrations of dissolved organic carbon. As leaching proceeded, however, the amounts of Al, Cu, Mn and Ni leached from the columns were closely related to the degree of sulphide oxidation in each column, i.e. to its mean pH. There were no statistically significant differences between treatments regarding the total amounts of metals leached and thus addition of sewage sludge to the tailings appeared to play a minor role for metal leaching patterns. Peak concentrations of Al and Cu in the leachate from untreated tailings and of Zn in the leachate from both untreated and SS-treated tailings at pH 4 exceeded national background values for groundwater.