Flow over rectangular sharp-crested weirs

Sharp-crested weirs are the simplest form of over-flow spillway that commonly used to determine the flow rate in hydraulic laboratories, industry and irrigation systems, where highly accurate discharge measurements are needed. In this study, the experimental upper and lower nappe profiles in rectangular sharp-crested weirs are fitted by quadratic and cubic equations, respectively. In addition, free-vortex theory is used to simulate flow over this kind of weirs and determine discharge coefficient. Physical models of sharp-crested weirs with various widths and heights were considered. The proposed method agrees well with the experimental observations. Also, the experimental data indicate that the suggested equation presents reasonable results for the range of 0 < h/P < 9.     

Agricultural zinc fluxes into soils and crops of central Iran at regional scale

Mass flux assessment can provide information that is essential for a sustainable management of elements in agricultural soils. In this article, we present an assessment of regional-scale averages of zinc (Zn) fluxes into agricultural soils and crops of central Iran for the period 1997–2011, using available databases such as regional agricultural statistics. The basic units of the balances were 15 townships of the provinces Qom, Isfahan and Fars. Averaged over the entire study region, the net Zn input into arable soil resulting from all fertilizer inputs – Zn removal with harvested crops was 1515 g ha^?1 yr^?1 across the entire region, with a range of 438–3009 g ha^?1 yr^?1 among townships. Estimated average Zn inputs with manure, mineral fertilizers, sewage sludge and compost were 1254, 531, 19 and 7 g ha^?1 yr^?1, respectively. The input-to-output ratio of these fluxes ranged from 1.8 to 12.9 among townships and averaged 6.1 for the entire study area. Considering that outputs other than with crop harvests are minor, Zn stocks are rapidly building up in the soils of the study region. Uncertainties in the manure and crop removal data were the main sources of estimation uncertainty in this study.     

Repurposing Ionophores as novel antimicrobial agents for the treatment of bovine mastitis caused by Gram‐positive pathogens

Increasing reports of multidrug‐resistant bacterial infections in animals has created a need for novel antimicrobial agents that do not promote cross‐resistance to critically important antimicrobial classes used in human medicine. In response to the recent emergence of antimicrobial resistance in several bovine mastitis pathogens, in vitro antimicrobial susceptibility was determined for four polyether ionophores (lasalocid, monensin, narasin and salinomycin) against Staphylococcus spp. and Streptococcus spp. isolated from clinical cases. In addition, erythrocyte haemolysis and WST ‐1 cell proliferation assays were used to assess in vitro mammalian cell cytotoxicity and biofilm susceptibility testing was performed using the minimum biofilm eradication concentration (MBEC ?) biofilm assay. Lasalocid, monensin, narasin and salinomycin exhibited bacteriostatic antimicrobial activity against all pathogens tested, including methicillin‐resistant staphylococci, with MIC ₉₀ values <16 μg/ml. Narasin and monensin displayed the least toxicity against mammalian cell lines and all compounds significantly reduced viable cell numbers in a Staphylococcus aureus biofilm. Based on in vitro characterization, all four ionophores offer potentially novel treatments against bovine mastitis but in vivo studies will be essential to determine whether acceptable safety and efficacy is present following intramammary administration.     

Effects of parenteral supply of iron and copper on hematology, weight gain, and health in neonatal dairy calves

The objective of the present study was to examine the effects of parenteral administration of iron and copper on hematological parameters, weight gain, and health of neonatal dairy calves in the period when iron and copper deficiency could be existed. Twenty-four Holstein calves were used for the experiment and randomly assigned to four different treatments. Treatments consisted of (1) control (no injections of Fe and Cu), (2) test 1 (1000 mg Fe as fe-dextran was injected to each calf at day 2 of age), (3) test 2 (160 mg Cu as methionine-copper complex was injected to each calf at day 14 of age), and (4) test 3 (Fe and Cu were injected to each calf as mentioned previously). Blood samples were collected from all of the calves within 24-48 hours after birth and at 7, 14, 21 and 28 days of age for measuring hematological parameters and within 24-48 hours after birth and at 14, 21 and 28 days of age for the determination of iron, copper, TIBC concentrations, and AST activity. Anti-coagulated blood was analyzed shortly after collection for: number of red blood cell (RBC), hemoglobin (Hb), heamatocrit (HCT), total leukocyte count (WBC), Platelet (Plt), MCH, MCV, MCHC, and differential leukocyte counts. The amounts of iron, copper, TIBC, and AST were measured in serum. Group had significant effects on the amounts of HCT, RBC, hemoglobin, MCV, neutrophil, weekly weight gain, and daily gain during each week (p < 0.05). Sampling time had significant effects on the amounts of RBC, MCV, MCH, MCHC, WBC, neutrophil, lymphocyte, monocyte, platelet, fibrinogen, copper, TIBC, AST, weight, weekly gain and, daily gain during each week (p < 0.05). significant interactions between sampling time and group were seen for HCT, RBC, hemoglobin, MCV, platelet, total protein, fibrinogen, iron, and TIBC (p < 0.05). Improved RBC parameters and MCV were seen in calves of group 4 (test 3) in comparing with control group. Total and daily gains were also significantly improved in test groups in comparing with control group (p < 0.05). No significant difference was seen for the days of treatment between groups.     

Productivity and optimal management of the uneven-aged hardwood forests of Hyrcania

Hyrcania is a productive region near the southern coast of Caspian Sea. Her forests are mostly uneven-aged beach-dominated hardwood mixtures. There is increasing willingness to treat these forests without clear-felling, following the ideas of continuous cover management. However, lack of growth and yield models have delayed this endeavor, and no instructions for uneven-aged management have been issued so far. This study developed a set of models that enable the simulation of stand development in alternative management schedules. The models were used to optimize stand structure and the way in which various initial stands should be converted to the optimal uneven-aged structure. The model set consists of individual-tree diameter increment model, individual-tree height model, survival model, and a model for ingrowth. The models indicate that the sustainable yield of the forests ranges from 2.2 to 7 m³ ha^?1 a^?1 in uneven-aged management, depending on species composition. Better ingrowth would substantially enhance productivity. The optimal stand structure for maximum sustained yield has a wide descending diameter distribution, the largest trees of the post-cutting stand being 80–100 cm in dbh. If cuttings are conducted at 30- or 40-year intervals, they should remove 20–40 largest trees per hectare. Despite moderate growth rate, uneven-aged management produces high incomes, 850–1,000 UDS ha^?1a^?1, because the timber assortments that are obtained from the removed large trees have very high selling prices. Optimal conversion to uneven-aged structure showed that the steady-state stand structure depends on initial stand condition and discount rate when the length of the conversion period is fixed. Discount rates higher than 1 % lead to reduced wood production, heavy cuttings, and low basal areas of the steady-state forest.     

Using 137Cs and 210Pbex measurements to explore the effectiveness of soil conservation measures in semi-arid lands: a case study in the Kouhin region of Iran

Journal of Soils and Sediments - One of the most fragile agro-ecosystems in Iran is represented by dry farming lands on steep hillslopes that occupy ca. 54% of the national agricultural lands....     

The effect of wild type P53 gene transfer on growth properties and tumorigenicity of PANC-1 tumor cell line

BACKGROUND: The p53 protein function is essential for the maintenance of the nontumorigenic cell phenotype. Pancreatic tumor cells show a very high frequency of p53 mutation. To determine if restoration of wild type p53 function can be used to eliminate the tumorigenic phenotype in these cells, pancreatic tumor cell lines, PANC-1 and HTB80, differing in p53 status were stably transfected with exogenous wild type p53 gene. METHODS: The transfection was performed using Polybrene/DMSO-Assisted Gene Transfer method. The wild type p53 gene integration into genomic DNA was detected by Southern blot and PCR. Furthermore, the expression of wild type p53 protein was detected in selected clones by immunohistochemistry and Western blot. RESULTS: While HTB80 cell line failed to produce a stable p53 expressing clone, the PANC-1 cells produced stable lines. Following characterization of clones, the growth rate and tumorigenicity of PANC-1 wild type p53 clones were compared to the control cells. Our data showed that the expression of wild type p53 decreased the growth rate of PANC-1 cells. It was also observed that the expression of wild type p53 in PANC-1 cells suppressed its potential for tumor formation in nude mice, completely, while the parental line leads to the formation of a relatively large tumor. CONCLUSION: Our results suggest that gene therapy based on restoration of wild type p53 protein function in pancreatic tumor cells with high amount of mutant p53 is a feasible option in pancreatic cancer treatment.     

Least limiting water range for different soil management practices in dryland farming in Iran

Integrated evaluation of soil physical properties using the least limiting water range (LLWR) approach may allow a better knowledge of soil water availability. We determined the LLWR for four tillage practices consisted of conventional tillage (CT), reduced tillage (RT), no-tillage (NT) and fallow no-tillage (NT_f). In addition, LLWR was determined for abandoned soils (i.e. control), compacted soils, ploughed compacted soils and abandoned soils with super absorbent polymers (SAPs) application. Soil water retention, penetration resistance (PR), air-filled porosity and bulk density were determined for the 0–5 and 0–25-cm depths. Mean LLWR (0.07–0.08 cm³ cm^?3) was lower in compacted soils than the soils under CT, NT, NT_f, RT, tilled, abandoned and SAP practices but it was not different among tillage practices. The values of LLWR were 0.12 cm³ cm^?3 for NT and CT. LLWR for tilled plots (0.12 cm³ cm^?3) became greater than compacted soils by 1.3 times. Analysis of the lower and upper limits of the LLWR further indicated that PR was the only limiting factor for soil water content, but aeration was not a limiting factor. The LLWR was more dependent on soil water content at permanent wilting point and at PR.