Settling velocity characterization of aquacultural solids

A top-loading settling column is described and used to characterize the settling properties of the solids in the discharge water from a commercial rainbow trout production facility. Mass-based and phosphorus-based settling curves are presented. The median settling velocity on a mass-basis for the settleable solids was 1.7 cm s⁻¹. The median settling velocity for the settleable phosphorus was 1.15 cm s⁻¹. Manually stripping fecal material from rainbow trout resulted in settleable solids with a median settling velocity of 0.7 cm s⁻¹. Examination of the settling velocity curves show that halving the overflow rate (OFR) from 2 to 1 cm s⁻¹ changes the removal efficiency from 0.61 to 0.73, an increase of about 20%. Halving the OFR again to 0.5 cm s⁻¹ increases the removal efficiency to 0.81, an improvement of about 11%. Settling characteristics of aquacultural solids will vary from facility to facility. The methods described in this paper can be used to perform a similar type of analysis at other aquacultural sites, which may be growing other species under different management regimes.     

Simulation of Short-Term Management Actions to Prevent Oxygen Depletion in Ponds

This study examined possible changes in dissolved oxygen concentration resulting from various short-term management actions that can be undertaken in response to cloudy conditions. The management actions were examined with a computer model of water quality in a pond, and include nutrient enrichment (fertilization, pH adjustment), water level control, and water exchange. Results of these simulations indicated that general management strategies directed at increasing nutrient availability were the least effective in counteracting the effect of the increased cloud cover. Flushing and reducing the water level in the pond were considerably more effective short-term management actions. Areas for field research were suggested to confirm the effectiveness of the various strategies.     

Male multiple matings and reproductive success in commodity-adapted strains of <Emphasis Type="Italic">Sitophilus oryzae</Emphasis>

Multiple matings occur in many species of stored-grain insect pests, such as the rice weevil Sitophilus oryzae (L.), with both female and male mating more than once and with more than one partner. Multiple female mating in S. oryzae increased lifetime fecundity by extending the period of time progeny were produced, but consequences of multiple male mating in S. oryzae were not yet studied although it is likely to increase male fitness by increasing offspring production. Here, the effects of polygynous mating on male mating behavior, success, and fitness were assessed in two strains of S. oryzae, one adapted to barley and another to wheat. Two insect strains were considered because they may differ in response depending on the host grain, which present distinct nutritional value to the insects. Mating by pairs formed between the two strains did not impact mating success, but wheat-adapted females exhibited longer mating duration, which was positively correlated with progeny production. Wheat-adapted males exhibited higher fertility than barley-adapted males. When male multiple matings were considered in successive polygynous matings, late matings led to lower non-cumulative values of progeny production, but higher cumulative performance, and wheat-adapted S. oryzae always performed better. Thus, male fitness and grain losses in wheat are higher than in barley, even when S. oryzae was adapted to the latter.     

Integrated pest management of Tuta absoluta: practical implementations across different world regions

Journal of Pest Science - The South American tomato pinworm, Tuta absoluta (Meyrick) (Lepidoptera: Gelechiidae), has invaded most Afro-Eurasian countries and is threatening worldwide tomato...     

Cellulitis in Japanese quail (Coturnix coturnix japonica)

A case of cellulitis was observed in Japanese quail (Coturnix coturnix japonica) reared for commercial meat production. This condition in Japanese quail has not been reported in the literature. This incident was the first, and to date only, occurrence of cellulitis in this processing plant. The cellulitis lesions were localized to the subcutis overlying the breast and inner thigh. Carcasses of processed birds and live birds from the affected farm were presented to the Poultry Diagnostic and Research Center, University of Georgia. Escherichia coli was cultured from the lesion. The affected live birds displayed lameness and had osteomyelitis. Pasteurella multocida serotype 3,4 was cultured from the liver and bone marrow of affected birds. Approximately 4.61% of the processed carcasses from the flock were condemned because of cellulitis. This represented a 10fold increase from the typical condemnation rate. Further investigation revealed birds were placed in higher than normal density; therefore, we theorize that the concurrent pasteurellosis and increased placement density resulted in the cellulitis condition.     

Thermal shock induction of triploidy in Atlantic cod (Gadus morhua L.)

The effects of thermal treatments on induction of triploidy in Atlantic cod have been investigated. Cold shock [−1.7±0.1°C at 20 min post fertilization (PF) for 2 h] was based on a previously developed protocol, and heat shocks, below the lethal threshold of 24°C, were at 16, 18 or 20°C applied 20, 30 or 40 min PF for 20 min. Cold shock did not affect larval survival and was ineffective for producing triploids (range 0–4%). A heat shock of 20°C at 20 min PF generated the highest percentages (range 66–100%) of triploid larvae at hatching, with survival ranging from 10% to 20% relative to the controls. Lower heat shock temperatures or delayed shocks increased survival but decreased the number of triploids, providing no net gain in triploid yield (range 1–9%). Heat shocks applied later than 20 min PF produced 2–4% tetraploid larvae at hatching. A thermal shock of 20°C initiated at 20 min PF and lasting 20 min proved to be the most generally efficient treatment for induction of triploidy in Atlantic cod.     

Post-fire production of mushrooms in Pinus pinaster forests using classificatory models

This study was aimed at describing post-fire mushroom production in a Mediterranean ecosystem dominated by Pinus pinaster Ait. in the northwest of Spain and assessing the results by classificatory models. During the autumn periods of 2003–2006, fruit bodies from 115 fungal taxa were collected in burned and unburned areas and were further grouped into the following categories: saprotrophic/mycorrhizal; and edible/non-edible. After wildfires, a significant reduction in the number of fungal species and fruit body biomass production was observed. Based on this relevant information, the first simple classificatory model for this aim is provided. Nine alternative models based on classifications according to combinations of edibility and functional groups were fitted, and four fruiting body biomass production classes were defined as possible responses. As explanatory factors, time after fire and climatic variables significantly related to fruit body production were included. The best predictive results were obtained for edible and edible-mycorrhizal models, for which the correct classification rate of production classes was between 92 and 85 %. Moreover, the models obtained were applied to analyse the effect of time after fire on fungal production. Mycorrhizal and edible fungal production after fire was classified into the lowest class, whereas saprotrophic and non-edible species followed a contrary trend. The classificatory models can be useful to optimise management and harvest of these increasingly appreciated non-timber forest resources.     

Fingerprints for main varieties of argentinean wines: terroir differentiation by inorganic, organic, and stable isotopic analyses coupled to chemometrics

Our main goal was to investigate if robust chemical fingerprints could be developed for three Argentinean red wines based on organic, inorganic, and isotopic patterns, in relation to the regional soil composition. Soils and wines from three regions (Mendoza, San Juan, and Co?rdoba) and three varieties (Cabernet Sauvignon, Malbec, and Syrah) were collected. The phenolic profile was determined by HPLC-MS/MS and multielemental composition by ICP-MS; (87)Sr/(86)Sr and δ(13)C were determined by TIMS and IRMS, respectively. Chemometrics allowed robust differentiation between regions, wine varieties, and the same variety from different regions. Among phenolic compounds, resveratrol concentration was the most useful marker for wine differentiation, whereas Mg, K/Rb, Ca/Sr, and (87)Sr/(86)Sr were the main inorganic and isotopic parameters selected. Generalized Procrustes analysis (GPA) using two studied matrices (wine and soil) shows consensus between them and clear differences between studied areas. Finally, we applied a canonical correlation analysis, demonstrating significant correlation (r = 0.99; p < 0.001) between soil and wine composition. To our knowledge this is the first report combining independent variables, constructing a fingerprint including elemental composition, isotopic, and polyphenol patterns to differentiate wines, matching part of this fingerprint with the soil provenance.