Discussion of Xixia’s Forestry A Model for the Development of China’s Township Forestry

ＤｉｓｃｕｓｓｉｏｎｏｆＸｉｘｉａ’ｓＦｏｒｅｓｔｒｙＡＭｏｄｅｌｆｏｒｔｈｅＤｅｖｅｌｏｐｍｅｎｔｏｆＣｈｉｎａ’ｓＴｏｗｎｓｈｉｐＦｏｒｅｓｔｒｙ￥ｂｙＸｕＧｕｏｚｈｅｎＰｏｖｅｒｔｙｉｓｓｔｉｌｌａｓｅｒｉｏｕｓｓｏｃｉａｌａｎｄｅｃｏｎｏｍｉ...     

Communities’ perceptions of benefit-sharing mechanisms for forest-based land reform models in South Africa

One of the dominant challenges facing the South African forestry sector is the issue of land restitution. The aim of this study was, therefore, to assess the perception of beneficiaries of benefit-sharing modalities for forest-based land reform initiatives in their locality. A random sampling technique selected 140 and 175 households in Amabomvini and Cata communities in KwaZulu-Natal and Eastern Cape provinces, respectively. The household beneficiaries showed a lack of knowledge of the criteria used for the disbursement of the benefits. In addition, over 70.0% of household beneficiaries in Amabomvini, compared with far less than 70.0% in Cata, preferred using rental income for infrastructure development in their respective communities. The results further showed that the relationship between the responses of the respondents from both Amabomvini and Cata communities regarding their perception on the existence of the criteria established to share the benefits, was statistically significant (χ² = 34.452, df = 4, p < 0.005). However, a lack of transparency, trust and greed were among the factors that household beneficiaries identified as the root causes to the poor benefit-sharing mechanisms. Therefore, it is recommended that there should be political will and commitment from government in order to ensure the development and strengthening of existing benefit- sharing policies for the improvement of livelihoods of the land beneficiaries.     

Determining Young’s modulus of timber on the basis of a strength database and stress wave propagation velocity I: an estimation method for Young’s modulus employing Monte Carlo simulation

In this article, we report on an estimation method for Young’s modulus that entails measuring only the stress wave propagation velocity of timber built into structures such as wooden buildings. Methods of estimating Young’s modulus that use the stress wave propagation velocity and characteristic frequency of timber in conjunction with timber density have long been used. In this article, we propose a method of easily and accurately estimating Young’s modulus from the stress wave propagation velocity without knowing the timber density. This method is based on a database of wood strength performance and density accumulated from a variety of research data and the method estimates Young’s modulus by a simulation method. We compared the Young’s moduli estimated by this method with those obtained by the bending test and by the measurement of the stress wave propagation velocity and density, and found similar results. This coincidence suggests that the method of estimating Young’s modulus presented in this article is valid. For example, the method is effective for convenient evaluation on site when determining whether a wooden building’s structural components should be reused or replaced when repairing or remodeling a building.     

Influence of moisture content on estimating Young’s modulus of full-scale timber using stress wave velocity

The effect of moisture content on the stress wave propagation velocity was investigated in order to estimate the Young’s modulus of full-scale timbers in an air-drying state using the measurement of stress wave propagation velocity above the fiber saturation point. Using Japanese cedar lumber, the velocity and the density under high-moisture condition and air-drying states were measured respectively; after measuring the modulus of elasticity in an air-drying state, the moisture content of each condition was measured. By performing numerical analysis on these data, the relationship between the moisture content and the rate of change of velocity of full-scale timbers was derived. This relationship was used to estimate the Young’s modulus of the timber in the air-drying state from the velocity in high-moisture condition. First, the velocity and the Young’s modulus in an air-drying state were estimated accurately from its density, moisture content and velocity under high-moisture condition. In cases where the density could not be measured, using the database of mechanical properties with the Monte Carlo simulation method, the Young’s modulus of the full-scale timber in an air-drying state might be estimated within 20% accuracy from its moisture content and velocity under high-moisture condition.     

Development Trend of Foreign Trade Policy for China’s Forest Industry

The paper analyzed the current status of foreign trade of forest industry in China and the national and international market changes. Based on the analysis, the orientation and transformation of foreign trade policy for China’s forest industry were discussed.     

Models for prediction of mortality in even‐aged forest

Models for predicting mortality in even‐aged stands were developed. The models rely on data from the Norwegian National Forest Inventory, and were designed for use in large‐scale forestry scenario models. A two‐step modelling strategy was applied: (1) logistic regression models predicting the probability of complete survival occurring,” and (2) multiplicative regression models for stem number reduction and diameter calibration. A joint model for all species predicting the probability of survival occurring on a plot was developed. Separate models for forests dominated by spruce, pine and broadleaved trees were developed for stem number reduction, while no appropriate models for diameter calibration were found. The phenomenon mortality is a stochastic, rare and irregular event, and this was reflected as low R ² in the models. However, the model performance appeared logical and the results of validations based on independent data were reasonably good, i.e. the presented models may be applied to large‐scale forestry scenario analyses. With new rotations of permanent sample plot measurements, the models should be evaluated and, if necessary, revised.     

Comparison of six generalized linear models for occurrence of lightning-induced fires in northern Daxing’an Mountains,China

The occurrence of lightning-induced forest fires during a time period is count data featuring over-dispersion (i.e., variance is larger than mean) and a high frequency of zero counts. In this study, we used six generalized linear models to examine the relationship between the occurrence of lightning-induced forest fires and meteorological factors in the Northern Daxing’an Mountains of China. The six models included Poisson, negative binomial (NB), zero-inflated Poisson (ZIP), zero-inflated negative binomial (ZINB), Poisson hurdle (PH), and negative binomial hurdle (NBH) models. Goodness-of-fit was compared and tested among the six models using Akaike information criterion (AIC), sum of squared errors, likelihood ratio test, and Vuong test. The predictive performance of the models was assessed and compared using independent validation data by the data-splitting method. Based on the model AIC, the ZINB model best fitted the fire occurrence data, followed by (in order of smaller AIC) NBH, ZIP, NB, PH, and Poisson models. The ZINB model was also best for predicting either zero counts or positive counts (≥1). The two Hurdle models (PH and NBH) were better than ZIP, Poisson, and NB models for predicting positive counts, but worse than these three models for predicting zero counts. Thus, the ZINB model was the first choice for modeling the occurrence of lightning-induced forest fires in this study, which implied that the excessive zero counts of lightning-induced fires came from both structure and sampling zeros.     

Methodology for classification of images based on the characteristics of a new interpretation of Shannon’s entropy

A new visual inspection method for the classification of wooden plates used in pencil manufacturing is presented. Darker regions in wooden plates indicate the presence of growth rings which are regions of hard wood. Pencils manufactured with these plates are more difficult to sharpen and have a tendency to bend and crack; therefore, these plates are classified as not being adequate for pencil manufacturing. The proposed method is based on the extraction and analysis of the features of the wooden plates using gray level images. The method classifies the plates using the results obtained by an automatic threshold determination based on Shannons entropy. The method was idealized aiming at low computational complexity, i.e., algorithm calculations involving only simple operations such as addition, subtraction, multiplication and division which could be implemented in hardware using VLSI technology or programmable logic devices. The wooden plate is mapped in an optimal number of regions; each region is pre-classified considering some relevant features based on the entropy gray level distribution of the pixels. Information from all regions is combined based on heuristic decision rules, arriving in a pre-classification stage where the regions are labeled in four classes (A, B, C and X). Two decision algorithms have been investigated for the final classification: one based in a co-occurrence matrix considering only a uni-directional horizontal neighborhood of the regions and the second is based on a heuristic method of information reduction considering combinations of the pre-classified regions. The final results obtained by the two algorithms were compared with the classification made by a human expert, demonstrating that the proposed method had very good performance.     

It’s what’s inside that counts: computer-aided tomography for evaluating the rate and extent of wood consumption by shipworms

Experiments were done to investigate in situ colonization of pine wood blocks by marine wood borers at the mouth of a small mountain river in the foothills of the Eastern Pyrenees. Standardized blocks were recovered after remaining underwater for increasingly long durations, until the available resource was exhausted by the shipworms assemblage that developed. Computer-aided tomography (CT) was used for visualizing and quantifying biogenic structures into the wooden blocks. The biodiversity survey of the wood pieces colonized indicated that up to three species of shipworms shared the resource at the same time. The specific wood consumption rate of Nototeredo norvagica was estimated 185 mm³ ind^?1 day^?1. The quantification of voids created by shipworm crowding indicated that total tunnelling represents, on average, 60% of the initial volume of a wood block, revising upward earlier estimates of wood destruction by 28%. CT analysis provides the quantitative measurements necessary to parameterize individual-based growth models linking wood consumption with the species diversity of shipworm assemblages.     

Estimating the age–diameter relationship of oak species in Switzerland using nonlinear mixed-effects models

Tree growth plays a key role in forest dynamics, yet little attention has been paid to quantifying tree age–diameter relationships. Predicting diameter growth of oaks is especially important due to their role in nature conservation and adaptive forest management under climate change. Thus, we (1) identified environmental variables that shape age–diameter relationships of oaks and (2) quantified the accuracy of predictions based on these variables. We determined the age–diameter relationship of 243 oaks (Quercus spp.) growing in Switzerland by using tree-ring samples. Nonlinear mixed-effects models based on a modified Chapman-Richards equation were fitted with environmental variables included as covariates. The fixed effects elevation, slope and water-holding capacity were most important in shaping the age–diameter relationships. Lower elevations, steeper slopes, north-facing aspects, higher water-holding capacities and moister summers resulted in larger maximum diameters. For 75 % of the oaks, age–diameter relationships predicted by the fixed effects matched fairly well the observations (root mean square error between predictions and observations <6 cm); the inclusion of random effects reduced root mean square errors for 86 % of the trees. These results suggest that water runoff plays a key role for the age–diameter relationships, accompanied by limiting temperature effects at higher elevations. The fixed effects covered variability in site quality, whereas the random effects included tree-specific deviations from expected age–diameter relationships, potentially due to neighbourhood effects such as stand density and competition.     

Poisson’s ratios of an oriented strand board

In the assessment of the structural adequacy of oriented strand board (OSB) members by design calculation, the need for the boards Poissons ratios often becomes evident. However, mention of Poissons ratios as a relevant mechanical property is seldom made in wood-based panel test and design standards. The short-term principal Poissons ratios of a typical OSB has been determined from tension tests. Mean values of 0.23 and 0.16 have been obtained for the major and minor Poissons ratios, respectively. The experimentally determined Poissons ratios appear consistent with the values estimated from the panel shear and tension moduli of elasticity. Complementary values of the Poissons ratios in bending have been estimated from the bending moduli of elasticity and tension test results for the panel. Efficiency in the assessment of OSB by design calculation follows from knowledge of Poissons ratios. However, for this benefit to be realised in routine design, the Poissons ratios of structural grade OSB need to be available.     

Effects of seed traits on the success of direct seeding for restoring southern Thailand’s lowland evergreen forest ecosystem

The success of direct seeding, as a low-cost approach to forest restoration, varies with tree species and seed characteristics. A system to predict which tree species are likely to be suitable for direct seeding would therefore be useful for improving forest restoration projects. Therefore, this study aimed to determine the effects of seed traits on the success of direct seeding to restore tropical forest in southern Thailand. Seeds of 19 indigenous lowland tropical forest tree species were collected, from both the east and west sides of the Thailand peninsular and the following parameters measured: seed size, shape, coat thickness and moisture content. Field trials were established to determine seed germination rates and to calculate a “direct seeding suitability score” for each species, which combined seedling establishment and growth rates. Seed size, shape and moisture content were associated with germination percentage. Species with higher seedling survival tended to have large or intermediate-sized seeds, round or oval seeds and seeds with low or medium moisture content. Only seed coat thickness was significantly correlated with the suitability score (r = 0.65, p < 0.01). Seed coat thickness >0.4 mm coincided with higher rank suitability score. These conditions successfully predicted the success or failure of direct seeding for 15 out of 19 species tested. Eight tree species are recommended as suitable for restoring lowland evergreen forest ecosystems in southern Thailand, by direct seeding.     

Estimation of LAI in the forested watershed using ASTER data based on Price’s model in summer and winter

Leaf area index (LAI) is an important parameter to identify the water balance in forested watershed as a biological factor influencing directly on the evapotranspiration in the forest area. The purpose of this study was to estimate the LAI in a small forested watershed in summer and winter by applying the Terra/Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data to the LAI estimation method. In this study, the estimation was based on the absorption and scattering processes of the solar radiation in the vegetation canopy and the spectral reflectance characteristics of soil vegetation. First, we estimated LAI based on Price’s model by application of ASTER data on the forested watershed located in the Tenzan Mountains of Saga, Japan. To validate the results of LAI estimation, secondly, we compared them to the measured LAI obtained by a plant canopy analyzer (LAI-2000) on the observation area inside the target region. This study showed that the LAI estimation method was a feasible and accurate method as indicated by the high relationship (r = 0.97) between LAI derived from ASTER data and LAI measured by LAI-2000. This paper is the first report on LAI estimation using Terra/ASTER data based on Price’s model and field investigation. This LAI estimation method is a reliable and applicable method.     

Determining Young’s modulus of timber on the basis of a strength database and stress wave propagation velocity II: effect of the reference distribution database on the determination

A method of determining the Young’s modulus of timber using the stress wave propagation velocity without knowing the timber density was developed in our previous study. This method enables the estimation of Young’s modulus by Monte Carlo simulation using an existing database of the Young’s modulus versus density relationship as reference. Here, in Part II, we consider the effect of the reference distribution database on the accuracy of the estimated Young’s modulus by the developed method. Twelve different reference distribution databases were used in this study, containing Young’s modulus versus density data for more than 13 000 real-size timber specimens of ten different species. We obtained the following results: (1) the distribution of Young’s modulus estimated using an arbitrary stress wave propagation velocity depends on the reference distribution database employed, (2) the most important factor is not that the reference database has data on the same species as the timber in the test, but rather that the reference distribution database covers the foreseeable range of timber densities within the test, and (3) the estimation accuracy is higher than about 80% when the database covers many species and has wide ranges of densities and Young’s moduli. This estimation method was developed in order to measure the Young’s modulus of timber whose density cannot be measured. Considering that the quality of lumber has a large variation, such estimation accuracy will be useful for practical applications.     

Discussion on Status and Functions of China’s Forestry

In recent years, the quantity and quality of global forest resources are declining continually. Contrarily, the both in China are increasing, which is deeply related to the sustainable forest management and eco-system management in China. With the trend that world community knows more about the important role of forest, more and more functions of forest are recognized. The impact and functions of China’s forestry deserve more concern. Based on some experiences in the field of forestry research, the authors introduced and analyzed the key role of China’s forestry for the sustainable development, and explained the functions of China’s forestry, such as ensuring ecological safety, addressing climate change, improving economic development, promoting social harmony and prospering ecological culture.     

Stress-wave velocity of trees and dynamic Young’s modulus of logs of 4-year-old Eucalyptus camaldulensis trees selected for pulpwood production in Thailand

Eucalyptus camaldulensis Dehnh. is extensively planted in Thailand to produce wood chips used as raw material for pulp and paper. To promote the utilization of the wood from plantation-grown E. camaldulensis for solid lumber, stress-wave velocity of trees and dynamic Young’s modulus of logs were investigated for 4-year-old trees of eight half-sib families selected for pulpwood production on the basis of the growth characteristics in the previous tree breeding program. For the eight families, the mean stem diameter at 1.3 m above ground level and mean tree height were 7.6 cm and 11.9 m, respectively. The mean stress-wave velocity of eight families was 3.45 km/s. Dynamic Young’s modulus of logs ranged from 7.88 to 17.64 GPa, and the mean value for the eight families was 11.72 GPa. Stress-wave velocity of trees was significantly correlated with dynamic Young’s modulus of logs, suggesting that dynamic Young’s modulus of wood can be evaluated nondestructively by stress-wave velocity of trees. Significant differences in stress-wave velocity and dynamic Young’s modulus of logs were obtained among families. Thus, to promote the utilization of E. camaldulensis wood for solid lumber production, selection of trees with high Young’s modulus should be applied to trees already selected for the growth characteristics in the previous tree breeding program.     

The Bioeconomic Potential for Agroforestry in Australia’s Northern Grazing Systems

Although agriculture generates 16% of Australia’s greenhouse gas emissions, it also has the potential to sequester large quantities of emissions through land use management options such as agroforestry. Whilst there is an extensive amount of agroforestry literature, little has been written on the economic consequences of adopting silvopastoral systems in northern Australia. This paper reports the financial viability of adopting complementary agroforestry systems in the low rainfall region of northern Australia. The analysis incorporates the dynamic tradeoffs between tree and pasture growth, likely forest product yields, carbon sequestration and livestock methane emissions in a bioeconomic model. The results suggest there are financial benefits for landholders who integrate complementary agroforestry activities into existing grazing operations at even modest carbon prices.