Confinement of electrons to quantum corrals on a metal surface

A method for confining electrons to artificial structures at the nanometer lengthscale is presented. Surface state electrons on a copper(111) surface were confined to closed structures (corrals) defined by barriers built from iron adatoms. The barriers were assembled by individually positioning iron adatoms with the tip of a 4-kelvin scanning tunneling microscope (STM). A circular corral of radius 71.3 A was constructed in this way out of 48 iron adatoms. Tunneling spectroscopy performed inside of the corral revealed a series of discrete resonances, providing evidence for size quantization. STM images show that the corral's interior local density of states is dominated by the eigenstate density expected for an electron trapped in a round two-dimensional box.     

Concentration-gradient-driven convection: experiments

Concentration-gradient-driven convection was studied by measurement of the rate of dissolution of the lower face of a KCl single crystal in contact with various solvents. The rate of mass transfer due to convective stirring appeared to follow the Rayleigh number to the one-third power law. A regular pattern of etch pits due to the convective stirring action was observed in the crystal face after exposure to water for 5 minutes. Schlieren photographs of the early stages of dissolution showed a regular pattern of spikes having approximately the same dimensions as the etch pits in the crystals.     

Near--Atomic Resolution Imaging of Ferroelectric Liquid Crystal Molecules on Graphite by STM

Near-atomic resolution images of a two-dimensional heteroepitaxial crystal composed of the relatively "functionally rich" chiral liquid crystal mesogen MDW 74 on graphite have been obtained by scanning tunneling microscopy (STM). This work is aimed at developing an improved understanding of the commercially crucial phenomenon of liquid crystal alignment by studying well-characterized surfaces. Herein is reported molecular-level characterization of the surface underlying a ferroelectric liquid crystal in situ, a requisite starting point for understanding the liquid crystal-solid interface at the molecular level. The results are also important in the context of developing a model for the molecular. origins of the contrast observed in STM images of organic monolayers on conductor surfaces. The data and analysis provide strong evidence that neither frontier orbital alone (highest occupied or lowest unoccupied molecular orbital) is sufficient to describe the observed tunneling efficiency.     

Graphite: a mimic for DNA and other biomolecules in scanning tunneling microscope studies

Highly ordered pyrolytic graphite (HOPG) is the substrate often used in scanning tunneling microscope (STM) studies of biomolecules such as DNA. All of the images presented in this article are of freshly cleaved HOPG surfaces upon which no deposition has occurred. These images illustrate features previously thought to be due to biological molecules, such as periodicity and meandering of "molecules" over steps. These features can no longer be used to distinguish real molecules from features of the native substrate. The feasibility of the continued use of HOPG as a substrate for biological STM studies is discussed.     

Vapor-Condensation Generation and STM Analysis of Fullerene Tubes

Fullerene tubular structures can be generated by vapor condensation of carbon on an atomically flat graphite surface. Scanning tunneling microscope (STM) images revealed the presence of tubes with extremely small diameters (from 10 to 70 angstroms), most of which are terminated by hemispherical caps. Atomic resolution images of such structures showed that the tubes have a helical graphitic nature. The formation of the tubes under the quasi-free conditions suggests that the growth to tubular rather than spherical configurations is preferred for "giant fullerenes."     

Rectification of STM Current to Graphite Covered with Phthalocyanine Molecules

The scanning tunneling microscope (STM) can be used to measure current-voltage characteristics on an atomic scale. The attachment of copper phthalocyanine molecules, in contrast to a variety of other molecules, to graphite changes the electrical characteristics of the STM from relatively symmetric to highly asymmetric or rectifying. Evidence is presented to show that the asymmetry arises because of the electronic energy levels of the copper phthalocyanine. The organic molecules were bonded to the graphite by an acid-base reaction that may have wide applicability.     

Dissolution of pyroxenes and amphiboles during weathering

Augite, hypersthene, diopside, and hornblende all undergo dissolution during weathering by means of the formation, growth, and coalescence of distinctive, parallel, lens-shaped etch pits. Similar etch features can be produced if these minerals are treated in the laboratory with concentrated hydrofluoric acid plus hydrochloric acid. These pits most likely form at dislocation outcrops, and their shape and orientation are controlled primarily by the crystallography of the underlying mineral. The results are similar to those found for soil feldspars and suggest that silicate weathering, in general, takes place by selective etching and not by general attack of the surface with consequent rounding as necessiated by bulk diffusion-type weathering theories.     

Sudden onset of pitting corrosion on stainless steel as a critical phenomenon

Stainless steels undergo a sharp rise in pitting corrosion rate as the potential, solution concentration, or temperature is changed only slightly. We report experiments using real-time microscopic in situ visualizations that resolve the nucleation and evolution of individual pits during the transition. They suggest that the sudden onset of corrosion is explained by an explosive autocatalytic growth in the number of metastable pits and that stabilization of individual pits takes place only later. This finding agrees with a theoretical approach treating the onset of pitting corrosion as a cooperative critical phenomenon resulting from interactions among metastable pits, and it extends perspectives on the control and prevention of corrosion onset.     

In situ scanning tunneling microscopy of corrosion of silver-gold alloys

An in situ scanning tunneling microscope (STM) was used to observe the morphological changes accompanying the selective dissolution of Ag from low-Ag content Ag-Au alloys in dilute perchloric acid. This study was undertaken to explore the role of surface diffusion in alloy corrosion processes. These results are interpreted within the framework of the kink-ledge-terrace model of a crystal surface and a recent model of alloy corrosion based on a variant of percolation theory. The corrosion process leads to roughening of the surface by dissolution of Ag atoms from terrace sites. Annealing or smoothening of the surface occurs by vacancy migration through clusters and the subsequent annihilation of clusters at terrace ledges.     

Variation of crystal dissolution rate based on a dissolution stepwave model

A formulation based on defect-generated dissolution stepwaves of the variation of dissolution rate with the degree of undersaturation is validated by near-atomic-scale observations of surfaces, Monte Carlo simulations, and experimental bulk dissolution rates. The dissolution stepwaves emanating from etch pits provide a train of steps similar to those of a spiral but with different behavior. Their role in accounting for the bulk dissolution rate of crystals provides a conceptual framework for mineral dissolution far from equilibrium. Furthermore, the law extends research to conditions closer to equilibrium and predicts a nonlinear decrease in the rate of dissolution as equilibrium is approached, which has implications for understanding artificial and natural processes involving solid-fluid reactions.     

Direct observation of native DNA structures with the scanning tunneling microscope

Uncoated double-stranded DNA dissolved in a salt solution was deposited on graphite and imaged in air with the scanning tunneling microscope (STM). The resolution was such that the major and minor grooves could be distinguished. The pitch of the helix varied between 27 and 63 angstroms in the images obtained. Thus the STM can be useful for structural studies of a variety of uncoated and isolated biomolecules.     

Commensurability and mobility in two-dimensional molecular patterns on graphite

Two-dimensional molecular patterns were obtained by the adsorption of long-chain alkanes, alcohols, fatty acids, and a dialkylbenzene from organic solutions onto the basal plane of graphite. In situ scanning tunneling microscopy (STM) studies revealed that these molecules organize in lamellae with the extended alkyl chains oriented parallel to a lattice axis within the basal plane of graphite. The planes of the carbon skeletons, however, can be oriented either predominantly perpendicular to or predominantly parallel with the substrate surface, causing the lamellar lattice to be either in or near registry with the substrate (alkanes and alcohols) or not in registry (fatty acids and dialkylbenzenes). In the case of the alcohols and the dialkylbenzene the molecular axes are tilted by +30 degrees or -30 degrees with respect to an axis normal to the lamella boundaries, giving rise to molecularly well-defined domain boundaries. Fast STM image recording allowed the spontaneous switch between the two tilt angles to be observed in the alcohol monolayers on a time scale of a few milliseconds.     

Subliming ice surfaces: freeze-etch electron microscopy

Vacuum sublimation of oriented single crystals of ice at temperatures from -110 to -60 degrees Celsius was studied by electron microscopy with the freeze-etch technique. Sublimation etches the ice surface to produce pits and asperities and above -85 degrees Celsius causes extreme surface roughening. The etch pits are ascribed to surface dislocations, and the extreme roughening is ascribed to the departure from unity of the vaporization coefficient. The asperities could not be attributed to impurities; they may be related to the whiskers that others have observed at higher temperatures.     

Probing the solvent-assisted nucleation pathway in chemical self-assembly

Hierarchical self-assembly offers a powerful strategy for producing molecular nanostructures. Although widely used, the mechanistic details of self-assembly processes are poorly understood. We spectroscopically monitored a nucleation process in the self-assembly of p-conjugated molecules into helical supramolecular fibrillar structures. The data support a nucleation-growth pathway that gives rise to a remarkably high degree of cooperativity. Furthermore, we characterize a helical transition in the nucleating species before growth. The self-assembly process depends strongly on solvent structure, suggesting that an organized shell of solvent molecules plays an explicit role in rigidifying the aggregates and guiding them toward further assembly into bundles and/or gels.     

Scanning tunneling microscopy and atomic force microscopy: application to biology and technology

The scanning tunneling microscope (STM) and the atomic force microscope (AFM) are scanning probe microscopes capable of resolving surface detail down to the atomic level. The potential of these microscopes for revealing subtle details of structure is illustrated by atomic resolution images including graphite, an organic conductor, an insulating layered compound, and individual adsorbed oxygen atoms on a semiconductor. Application of the STM for imaging biological materials directly has been hampered by the poor electron conductivity of most biological samples. The use of thin conductive metal coatings and replicas has made it possible to image some biological samples, as indicated by recently obtained images of a recA-DNA complex, a phospholipid bilayer, and an enzyme crystal. The potential of the AFM, which does not require a conductive sample, is shown with molecular resolution images of a nonconducting organic monolayer and an amino acid crystal that reveals individual methyl groups on the ends of the amino acids. Applications of these new microscopes to technology are demonstrated with images of an optical disk stamper, a diffraction grating, a thin-film magnetic recording head, and a diamond cutting tool. The STM has even been used to improve the quality of diffraction gratings and magnetic recording heads.     

"农民信箱"在农业信息化建设中的作用和应用

“农民信箱”是指利用互联网和通信技术,通过实名注册,让农民借助电脑和短信进行网上双向交流,快速、便捷地获得各类免费科技、市场信息和系统提供的服务,构筑农民网上社会。上虞市通过政府推动,建成了涵盖全市所有涉农部门、乡镇街道、村、农业企业和合作社的农民信箱应用体系,实现了农业信息的网上双向交流,为农民和企业、农民和政府搭建了快捷的交流平台,产生了较好的社会效益。     

黄土高原残塬沟壑区葎草栽培方法初步研究

对黄土高原残塬沟壑区葎草种植利用进行了初步研究.结果表明,律草是工程措施后的优良先锋草种.适宜播期和合理的密度是提高葎草种植利用的关键.适播期为冬末初春,密度平台埂上1～2株/m,隔坡带埂下1株/m,鱼鳞坑每坑1株为宜.律草生长快,产草量高,病虫害少,是优质兼用型牧草.     

Alpha-recoil tracks in mica: registration efficiency

Recoils from alpha-particle decay of naturally occurring radioactive nuclides have energies between 70 and 169 kiloelectron volts. It is shown that these alpha recoils register tracks in mica, observable as etch pits, with an efficiency of about 80 percent. When the recoil energy is degraded to 40 kiloelectron volts the efficiency drops to 50 percent. But, since the decay of each thorium or uranium impurity atom in natural mica is followed by a cascade of six or eight alpha particles, the overall registration efficiency must be very nearly 100 percent.     

Electron diffraction and imaging of uncompressed monolayers of amphiphilic molecules on vitreous and hexagonal ice

A new approach is described for probing domains of ordered self-assemblies of amphiphilic monolayers at the aqueous solution interface. The method has potential importance for the study of membrane structure, Langmuir-Blodgett films, and nucleation processes of two-and three-dimensional crystals. Electron diffraction (ED) patterns indicative of two-dimensional crystalline self-assembly were obtained from samples, which were examined by cryo-electron microscopy, of monolayers of water-insoluble amphiphiles on vitrified aqueour substrates. The apparent hexagonal symmetry of an ED pattern from a C(16)H(33)OH monolayer was interpreted in terms of multiple twinning. Monolayers of the CL(31)H(63)OH and cadmium salt of C(19)H(39)CO(2)H that were studied by dark-field techniques displayed faceted two-dimensional crystallites with a maximal size of 1 to 2 micrometers. Epitaxial nucleation of hexagonal ice by the C(31)H(63)OH monolayer has also been demonstrated by ED.     

Magnetic properties of hydrothermally recrystallized magnetite crystals

The discrepancy between the magnetic hysteresis properties of magnetite crystals that are precipitated from solution (<0.3 micrometer) and of crushed sifted grains (>0.3 micrometer) is not an inherent property of magnetite but is caused by the highly stressed state of crushed material and by adhering finer fragments. The size trends of magnetic properties exhibited by submicrometer-size precipitated grains continue in the size range from 1 micrometer to 1 millimeter in a set of hydrothermally recrystallized magnetite crystals. Coercive forces of these narrowly sized crystals follow a power law over a wide size range (0.1 micrometer to 1 millimeter) as predicted by theory. Dislocation etch pits show similar dislocation densities for hydrothermally grown (3 x 10(10) meter (-2)) and natural (1 x 10(10) meter(-2)) magnetite crystals. Hysteresis parameters of hydrothermally grown crystals are similar to those of natural crystals but are about one-fifth of those for crushed grains.