Effects of reduced tillage and liming on microbial activity and soil properties in a weakly-structured soil

The effects of reduced tillage and lime on crop yield and soil physical and microbial properties were studied in a weakly-structured silty clay loam soil. Two autumn primary tillage practices were compared, mouldboard ploughing to 20–25 cm and cultivation to 12 cm. Seedbed preparation was carried out by several harrowing operations in the mouldboard ploughed treatment, and with a PTO-driven harrow in the same operation as sowing in the shallow cultivation treatment. The tillage treatments were applied alone or were combined with liming aimed at soil structural improvement. Lime was added as 6.5 Mg CaO ha⁻¹ before the start of the experiment and mixed into the top 12 cm of soil with a disc cultivator. A 4-year crop rotation was used: spring barley, spring oilseed rape, spring/winter wheat and oats, and all crops were compared each year. Crop residues were retained in the experiment and incorporated at cultivation. Aggregate stability was improved by the shallower tillage depth, probably as an effect of an increase in soil organic matter and a more active microbial biomass. Liming had little effect on soil structure variables but increased microbial activity to some extent. This was reflected in higher crop yields, especially when the shallow tillage depth was combined with liming. Penetration resistance in the seedbed subsoil was highest when mouldboard ploughing was carried out in plots without liming. Data were examined with principal component analyses, and the structures in the data were presented as scores and loading plots, which revealed groupings between samples and relationships between variables, respectively.     

Tillage effects on soil aggregation,organic carbon fractions and grain yield in Eum‐Orthic Anthrosol of a winter wheat–maize double‐cropping system,Northwest China

Conservation tillage has been applied in vast semi‐arid regions of the Guanzhong Plain, Northwest China. The tillage effects on soil aggregation, organic carbon (OC) stabilization and grain yield on this plain have not been fully elucidated. A 9‐year field experiment was established from 2002 on a silty clay loam soil (Eum‐Orthic Anthrosol) growing winter wheat–maize in a double‐cropping system. Six conservation tillage treatments were applied by different combinations of rotary tillage (RT), subsoiling (SS) and no‐till (NT), with or without finely chopped straw retention. Conventional tillage (CT) acted as the control. Results showed that in the surface (0–10 cm) soil, the proportion of water‐stable aggregates (WSA) <0.05 mm was 18% less while that for WSA >2 mm was 98% more under NT treatments compared with CT. Additionally, the oxidizable OC content in WSA 0.25–2 mm was 27% greater under NT treatments compared with CT. The OC stocks increased under SS by 17%, RT by 16% and NT by 15% relative to CT. Grain yield (wheat + maize) showed similar increasing trends in all the tillage treatments compared with CT. Both OC stocks and grain yield were larger in treatments with than without straw retentions. These results indicate that NT is beneficial for OC accumulation in WSA but is limited in its ability to improve soil structure in this region. SS plus straw retention (fine‐chopped or as a mulch) is an effective practice to improve soil structural stability, OC accumulation and soil productivity of Eum‐Orthic Anthrosols in Northwest China.     

Structure liming enhances aggregate stability and gives varying crop responses on clayey soils

It has been suggested that liming can improve soil structure and thereby decrease losses of particles and associated nutrients. In this study, two types of structure lime, slaked lime (Ca(OH)₂) and a mixed product of calcium carbonate (CaCO₃) and slaked lime (Ca(OH)₂), were applied at three different rates in field trials on clayey soils (23%–40% clay). A combination of primary tillage and structure liming was also studied, in a split-plot trial on a clayey soil (25% clay). Aggregate (2–5?mm) stability, measured as reduction in turbidity (which is strongly correlated with losses of particulate phosphorus), was significantly increased with the highest application rates of both structure lime products. Aggregate size distribution was also improved with structure lime, creating a finer tilth in the seedbed. Yield response to structure lime was not consistent, with both negative and positive responses over the four-year study period. Positive yield responses can possibly be attributed to the finer tilth preventing evaporation in two dry growing seasons. Negative yield responses were probably an effect of impaired phosphorus availability associated with limited precipitation in May-July in 2011 and 2013. Two years after liming, soil pH levels were significantly elevated in plots with the highest application rate of structure lime, whereas no significant increases were found three years after liming. However, a lingering effect of liming was still detectable, as manganese concentration in barley grain was significantly lower in plots with the highest application rates of both structure lime products in the fourth study year. These results indicate that structure liming can be used as a measure to mitigate phosphorus losses from clayey soils, thereby preventing eutrophication of nearby waters. However, the yield response was varying and unpredictable and thus further investigations are needed to determine the circumstances in which field liming can act efficiently not only to prevent phosphorus losses, but also to ensure consistent yield increases.     

Conservation Agriculture Had a Poor Impact on the Soil Porosity of Veneto Low‐lying Plain Silty Soils after a 5‐year Transition Period

Conservation agriculture practices have been proposed as a set of techniques for improving soil structure properties and related ecosystem services. This study compared conservation agriculture (CA) practices (no‐tillage, cover crop and residue retention) and conventional intensive tillage system in order to evaluate their effects on total porosity, pore size distribution, pore architecture and morphology. The experiment was set up in 2010 on four farms of the low‐lying Veneto Region plain characterized by silty soils. Almost hundred soil samples were collected in 2015 at four depths down to 50‐cm layer and investigated for porosity from micrometre (0·0074 μm) to macrometre (2·5 mm) by coupling mercury intrusion porosimetry and X‐ray computed microtomography (μCT). Indices of soil morphology and architecture were derived by analysing 3D images and mercury intrusion porosimetry pore size curves. Results suggested that silty soils of Veneto plain are microstructured because much (82%) of the porosity ranged between 0·0074 and 30 μm. CA practices positively influenced the ultramicroporosity class (0·1–5 μm) (1·86E‐01 vs 1·67E‐01 μm³ μm⁻³) that is strictly linked to soil organic carbon stabilization while no effects were observed in X‐ray μCT porosity domain (> 26 μm). Silty soils of Veneto plain showed a slow reaction to CA because of the poor aggregate stability and low soil organic carbon. However, the positive response of the ultramicropore fraction indicates that a virtuous cycle was initiated between soil organic carbon and porosity, hopefully leading to well‐developed macropore systems and, in turn, enhanced soil functions and ecosystem services. Copyright © 2017 John Wiley & Sons, Ltd.     

Herbicide sorption, degradation, and leaching in three Swedish soils under long-term conventional and reduced tillage

Soil tillage has the potential to influence water flow and solute transport through the soil by cutting continuous macropores which connect the soil surface to the subsoil. Tillage also affects soil organic carbon sequestration which may lead to different sorption and degradation properties depending on the long-term tillage practices. The objective of this study was to quantify the differences in sorption, degradation and leaching of the herbicides bentazone and isoproturon between conventional tillage (CT) and reduced tillage (RT) under Swedish conditions. Three sites, Ultuna (silty clay), Säby (loam), and Lönnstorp (sandy loam moraine till), where replicate plots had been under either CT or RT for at least 9 years, were included in the study. A higher organic carbon content had developed in the top 5 cm of RT plots compared to the 10–20 cm depth and CT plots since the establishment of the experimental treatments. Adsorption and degradation were studied in laboratory experiments and solute transport was studied in undisturbed column experiments using non-reactive tracers and herbicides. The results from the column experiments were not significantly different between tillage treatments for Säby and Lönnstorp. For Ultuna, RT resulted in a more pronounced preferential tracer transport pattern and isoproturon leaching was twelve times larger compared to CT columns. This indicates that the tillage treatment had affected the macropore connectivity only at Ultuna. Freundlich adsorption coefficients for both bentazone and isoproturon were larger (though not always significantly) in the top 5 cm of RT soil compared to the 10–20 cm depth and to CT, reflecting the higher organic carbon content. The degradation rate was also generally larger (though not always significantly) in the top 5 cm of RT soil. These results show that RT has the potential to reduce pesticide leaching. However, any such reduction may be counter-balanced by enhanced preferential flow for soils where RT results in improved macropore connectivity.     

Soil macroporosity,hydraulic conductivity and air permeability of silty soils under long-term conservation tillage in Indiana

With the increasing use of conservation tillage, many questions about the long-term effects of tillage system on soil physical properties have been raised. Studies were conducted to evaluate saturated hydraulic conductivity (K_SAT), macropore characteristics and air permeability of two silty soils as affected by long-term conservation tillage systems in the state of Indiana. Measurements were taken during the tenth year of a tillage study on a Chalmers silty clay loam (Typic Haplaquoll) and the fifth year of a study on a Clermont silt loam (Typic Ochraqualf). Tillage systems were moldboard plow, chisel, ridge till-plant, and no-till in a rotation of corn (Zea mays L.) and soya beans (Glycine max L.). Saturated hydraulic conductivity was measured on large soil columns (25 × 25 × 40 cm) before spring tillage, and macropore size and continuity were assessed with staining techniques. Intact soil cores (8 cm diam × 10 cm) were collected in early July in the row and non-trafficked interrow at three depths (10–20, 20–30, and 30–40 cm) and were analyzed for air permeability (K_air), air-filled porosity and bulk density. Saturated hydraulic conductivity values were in the order plow > chisel > ridge till > no-till for the Chalmers soil and were significantly greater in the plow treatment than in the other 3 tillage systems on the Clermont soil. Differences in K_SAT between the 2 soils were generally greater than differences among tillage systems, and coefficients of variation were lower for treatments that did not include may fall tillage operations. At the 10-cm depth on the Chalmers soil, the chisel treatment had the greatest number of stained cylindrical channels, whereas for the Clermont soil the ridge till had the greatest number at this depth. Although the no-till treatment had similar or fewer total channels, it had the most continuous channels from the 10-cm depth to the 20- and 30-cm depths on both soils. Tillage system, row position and depth all affected K_air. On the Chalmers soil, plow, chisel and ridge systems had lower K_air between rows than in the row at the 10–20-cm depth, whereas no-till had constant K_air in the row and between the row. On the Clermont soil, ridge till had the highest K_air of all treatments at the 10–20-cm depth, and no-till had the highest K_air of all treatments at the 20–30-cm depth.     

Soil tillage systems and forms of lime application on soil attribute enhancements in ratoon sugarcane

Combining deep tillage (DT) with lime application at greater depths may improve sugarcane yield. The objective of this study was to evaluate the impact of conventional tillage (CT) and DT systems and liming on sugarcane productivity and soil physical attributes. The experiment was conducted in a clayey-textured Rhodic Hapludox soil cultivated with sugarcane for two growing seasons (first and third ratoons) using a randomized block design with four treatments and four repetitions. The treatments consisted of DT without liming (DT0), DT with liming (DT2), CT without liming (CT0) and CT with liming (CT2). In addition to sugarcane stalk and sugar yields, macroporosity (MA), microporosity (MI), total soil porosity (TP), weighted average diameter (WAD), aggregate stability index (ASI), soil penetration resistance (SPR), pH, potential acidity (H + Al), total soil organic carbon (SOC), particulate organic carbon (POC), mineral-associated organic carbon (MOC), calcium (Ca) and magnesium (Mg) were analysed. DT2 promoted the best soil conservation effect on sugarcane. In general, DT, regardless of lime application, reduced SOC and POC in soil surface layer. Nevertheless, in the long term, localized lime addition resulted in significant reductions in compaction, reaching values below 2 MPa. The soil fertility improvement provided by DT2 promoted increased sucrose concentrations and stalks yield. Considering that there was an improvement in the physical quality and fertility of soil for better plant development, the deep tillage with localized lime addition can be considered an effective alternative for sugarcane cultivation.     

Mineralization of nitrogen in fertilizer-acidified lime-amended soils

Summary The application of NH _inf4 ^su+ -based fertilizers to soils slowly lowers soil pH, which in turn decreases nitrification rates. Under these conditions nitrification and N mineralization may be reduced. We therefore investigated the impact of liming fertilizer-acidified soils on nitrification and N mineralization. Soil samples were collected in the spring of 1987 from a field experiment, initiated in 1980, investigating N, tillage, and residue management under continuous corn (Zea mays L.). The pH values (CaCl₂) in the surface soil originally ranged from 6.0 to 6.5. After 6 years the N fertilizer and tillage treatments had reduced the soil pH to values that ranged between 3.7 and 6.2. Incubation treatments included two liming rates (unlimed or SMP-determined lime requirement), two ¹⁵N-labeled fertilizer rates (0 or 20 g N m^-2), and three replicates. Field-moist soil was mixed with lime and packed by original depth into columns. Labeled-¹⁵N ammonium sulfate in solution was surface-applied and columns were leached with 1.5 pore volumes of deionized water every 7 days over a 70-day period. Nitrification occurred in all pH treatments, suggesting that a ferilizer-acidified soil must contain a low-pH tolerant nitrifier population. Liming increased soil pH values (CaCl₂) from 3.7 to 6.2, and increased by 10% (1.5 g N m^-2) the amount of soil-derived NO₃ ^--N that moved through the columns. This increase was the result of enhanced movement of soil-derived NO₃ ^--N through the columns during the first 14 days of incubation. After the initial 14-day period, the limed and unlimed treatments had similar amounts of soil N leaching through the soil columns. Lime increased the nitrification rates and stimulated the early movement of fertilizer-derived NO₃ ^--N through the soil.     

Effects of long-term contrasting lime and phosphorus applications on barley grain yield,root growth and abundance of mycorrhiza

Lime and phosphorus (P) applications are common agricultural management practices. Our aim was to quantify the effects of long-term application practices on root growth and abundance of arbuscular mycorrhizal fungi (AMF) under field conditions. We assessed the effects of lime and P fertilizer applications on barley yield, root growth and AMF abundance in 2016. Treatments were no, low, medium and high liming rate corresponding to application of 0, 4, 8 and 12 Mg lime ha⁻¹ every 5–9 years since 1942 combined with no or yearly application of 15.6 kg P ha⁻¹ since 1944. At harvest, grain yield, root intensity (core-break) and AMF abundance at different soil depths were estimated. Root development was monitored during early growth with minirhizotrons in treatments receiving low, medium and high liming rates and P fertilization. A quadratic model relating grain yield to liming rate estimated yields to peak at 6.4 Mg lime ha⁻¹ with yields of 4.2 and 3.2 Mg grain ha⁻¹ with and without P fertilization, respectively. Low and medium liming rates resulted in greater AMF abundance, especially in the no P treatments. During early growth in P-fertilized treatments, 77% and 65% more roots developed in the soil profile when treated with medium and high liming rate, respectively, compared to low liming rate. We conclude that long-term application of lime in soils receiving yearly P fertilization improved conditions for root growth in soil layers below 30 cm, but at the high liming rate, this did not translate into higher yield.     

Lime placement on subsoil as a strategy to reduce phosphorus leaching from agricultural soils

Leaching of phosphorus (P) from agricultural land is a major contributor to eutrophication of surface waters in many countries, and effective mitigation options to reduce P in leachate are needed. In this study, intact columns (0.77 m deep) of subsoil from three Swedish agricultural soils (one sand and two clay) were used to examine whether placing quicklime (calcium oxide, CaO) on the subsoil could reduce P leaching over a 3‐yr period. Leaching of particulate P (PP) was significantly less from clay soil columns with lime than from clay soil columns without (P < 0.001 and P < 0.05, respectively), with a relative reduction of 49 and 51% in the two soils. Leaching of dissolved reactive P (DRP) was less from sand columns with lime than from sand columns without, although not significantly so due to large variation in P leaching between columns. These results indicate that placement of lime on subsoil has potential to reduce P leaching, especially of PP from clay soils. However, more studies including both topsoil and subsoil and a range of soil types are needed to assess the full potential of this P mitigation option.     

Impact of tillage intensity on clay loam soil structure

Soil structure and structural stability are key parameters in sustainable soil management and optimum cropping practices. This study aimed to improve the knowledge of potential precision tillage practices by characterizing the effect of varied tillage intensities on structural properties of a clay loam soil. An experiment with seedbed preparation was conducted using a power take‐off‐driven rotovator equipped to measure torque and angular velocity and with operational speed (OS) and rotational speed (RS) as main factors. Effects of soil coverage prior to tillage and wheeling directly after tillage were measured at one combination of OS and RS. The soil was sampled at 0–80 mm depth. Under slow OS (2.9 km hr^?1) compared with fast OS (6.3 km hr^?1), specific energy input was greater (116 and 52 J kg^?1 on average, respectively), and it increased with RS. Wheeling resulted in larger aggregate diameter right after tillage (at T1; 56 mm as geometric mean compared with 9 mm), with 42 times smaller geometric mean of air permeability 45 days after tillage (at T2) and with greater soil dispersibility at T2. Highly significant correlations were observed between soil dispersibility and energy input, specific surface area of aggregates, fractions of small (<4 mm) and medium (8–16 mm) aggregates, and geometric mean diameter. Slow OS combined with fast RS showed significantly greater air permeability than all other treatments. The results suggest that there is a potential for controlling soil structure in seedbed preparation by minimizing compaction from traffic and adapting site‐specific control of rotovation intensity.     

Tillage,lime, and poultry litter effects on soil zinc,manganese, and copper

Abstract

Long‐term no‐tillage has profound effects on soil properties which can affect the availability of plant nutrient elements. The objectives were to study the effects of tillage and lime treatments on soil pH and extractable soil micronutrients where poultry litter was used as a nitrogen (N) source. Surface soil samples were taken in the spring and fall for two years from a long‐term tillage experiment that had been in place for nine years. There were two tillage treatments [conventional (CT) and no‐tillage (NT)] and six lime/ gypsum treatments (control, 8,960 kg gypsum ha^‐1 every fourth year, 4,480 kg lime ha^‐1 every fourth year, and three treatments of 8,960 kg lime ha^‐1 in a four‐year period divided by application times into 1, 2, and 4 treatments per year). Poultry litter was applied each year of the two‐year experiment at a rate of 8.96 Mg ha^‐1 on a dry weight basis. The crop was corn (Zea maize L.). Soil samples were analyzed for pH and Mehlich‐1 zinc (Zn), manganese (Mn), and copper (Cu). Soil pH was higher for NT than CT and was higher in the spring than in the fall. Lime rates resulted in soil pH increases, but showed less difference for CT than NT. The three 8,960 kg ha^‐1 per four yr treatments caused an interaction in that for CT the pH increased more for 2,240 kg ha^‐1each year than for 8,960 kg ha^‐1 every fourth year and the opposite was true for NT. Extractable Zn, Mn, and Cu all responded to this interaction being lower for the higher pH plots. Extractable Zn was higher for NT possibly due to high Zn from the poultry litter and non‐incorporation for NT. Extractable Cu was lower for NT as expected from the soil pH, whereas extractable Mn was not affected by tillage. Extractable Zn and Cu both increased over time due to inputs from the poultry litter. Neither extractable Zn nor Mn responded to increasing lime rates, however Cu decreased with increasing lime rate. Extractable Cu was influenced mainly by soil pH differences due to tillage and lime. Extractable Zn was influenced much more by tillage and from inputs by the poultry litter and not as much by pH differences. Extractable Mn was the least responsive to tillage and lime treatments of the three micronutrients studied.     

Tillage,lime, and poultry litter effects on plant concentrations of zinc,manganese, and copper

Minimum tillage cropping systems and the use of animal manures on cropland are becoming more prevalent. An experiment was initiated to determine the effects of tillage and lime/gypsum variables on uptake of zinc (Zn), manganese (Mn), and copper (Cu) by corn (Zea mays L.) and to show correlations between plant uptake of these metals and soil pH and Mehlich 1‐extractable soil metals where poultry litter was used as a nitrogen (N) source. Surface soil samples were taken in the spring and fall for two years from a long‐term tillage experiment that had been in place for nine years. There were two tillage treatments [conventional (CT) and no‐tillage (NT)] and six lime/gypsum treatments (control, 8,960 kg gypsum ha^‐1 every fourth year, 4,480 kg lime ha^‐1 every fourth year, and three treatments of 8,960 kg lime ha^‐1 in a four‐year period divided by application times into 1, 2, and 4 treatments). Poultry litter was applied each year of the two‐year experiment at a rate of 8.96 Mg ha^‐1 on a dry weight basis. Soil samples were analyzed for pH and Mehlich 1‐extractable Zn, Mn, and Cu, and plant tissue (small plant, ear leaf, stalk, and grain) was analyzed for Zn, Mn, and Cu concentrations. Lime treatments resulted in lower Zn in the small plant and ear leaf for CT, but not for NT. Plant Mn was decreased by lime and gypsum rates for small plant, ear leaf, stalk and grain for both years for CT and NT. Correlations for plant Zn versus soil pH were generally non‐significant, except for one year for ear leaf Zn (R=‐0.413**). Correlations for soil pH and plant tissue Cu were all nonsignificant. Correlations for plant Mn and soil pH were strong with R values over 0.80. Plant Mn response to treatments was found at a pH range of 4.2 to 5.8 for ear leaf and pH 5.2 to 6.2 for stalks. Plant Mn and Zn versus Mehlich 1‐extractable soil Mn and Zn, respectively, were negative. This response was possibly due to oxidation‐reduction and non‐incorporation of the lime for Mn and non‐incorporation of the lime for Zn. Also, the poultry litter was high in Zn (447 mg kg^‐1), which could have masked pH effects. It was concluded that soil sampling for plant micronutrients for NT, especially where a waste material high in micronutrients is applied, can give erratic and even erroneous results. However, lime and tillage treatments had a predictable effect on micronutrient uptake as related to soil pH.     

Infiltration patterns into two soils under conventional and conservation tillage: influence of the spatial distribution of plant root structures and soil animal activity

The characteristics and properties of the soil macropore system may cause different infiltration behavior under different tillage practices. To evaluate the effect of a specific tillage system on infiltration and percolation with particular regard to the influence of crop structure and soil animal activity dye tracer irrigation experiments were conducted in a silty (Luvisol) as well as in a sandy loam soil (Podzolluvisol). The spatial distribution of water flow paths was experimentally examined at four square areas of 0.49 m², under conservation and conventional tillage. Natural rainstorms were simulated by irrigating the plots with 2.8×10⁻³ M methylene blue solutions. For both soils the root crowns of the agricultural crop, wormcasts and stained soil sections as well as macroscopic conduits were traced on plastic sheets. The investigated soil depths were 0, 5, 10 and 20 cm for the both soils. For the Luvisol, the 30, 40, 50, 80 and 120 cm depths were also studied.For the Luvisol, the conservation tillage plot revealed pronounced vertical connectivity and continuity of the macropore network (maximum depth of stained pores=120 cm), while at the conventional tillage plot, continuous macropores were observed to soil depths of 50 cm, but mainly restricted to the ploughed topsoil (0–30 cm soil depth).For the Podzolluvisol, at the conservation tillage site extensive mulch residues prevented water transport beneath 5 cm soil depth. In contrast, at the conventionally tilled site stained water reached a depth of 20 cm. For all investigated plots on both soil types, the location of the root crowns of agricultural crop and of wormcasts was not related to percolation patterns.The results suggest that conservation tillage on silty soils under agricultural landuse could induce an increased water retention capacity reducing the significance of fast runoff components.     

Silage maize quality in different uses of Italian ryegrass and soil management methods after liming

The effects of lime application with multiple soil management methods and uses on dry matter (DM) yield and crude protein (CP) content of Silage maize cropping in succession with Italian ryegrass (ryegrass) from 2009 to 2014 in a southern Brazilian Oxisol were studied. The experimental design was completely randomized block in split-plot with four replications. The main plot treatments were the four soil management methods: conventional tillage (CT), minimum tillage (MT), no-tillage (NT) and chiseled no-tillage (CNT). The sub-plots treatments were the three uses of Italian ryegrass (ryegrass): cover crop (CC), silage (S), and grazing dairy heifers as part of integrated crop-livestock system (ICL). In all the years, the maize was sown approximately 30 days after the ryegrass desiccation with herbicide. In the medium-term (5 yrs.) after liming, soil management methods did not change DM yield and CP content in silage maize. The use of ryegrass for S and ICL did not change DM yield, but notably maintained or increased CP content in silage maize after liming. The use of ryegrass only as CC provided less measurable benefits than the combined production system of silage maize with ryegrass.     

Effect of two types of lime on some soil physical attributes of an oxisol from Brazil

Abstract

Liming is a very important practice, especially in acid soils such as some Oxisols from Brazil, in which the chemical effects of liming are reasonably known. However, the effects of liming on soil physical properties are either not well known or, at least, controversial. In order to verify, under field conditions, the effect of liming on some soil physical attributes such us the aggregate stability, the water dispersible clay, the water retention were evaluated in a citrus liming experiment on a Dark Red Latosol (Typic Haplorthox) clay texture, from Cordeirópolis, São Paulo State, Brazil. The soil samples were collected in 0–10 cm and 10–20 cm depths, three years after the application of lime in the experiment, which had two replications per treatment. Calcitic and dolomitic limes were used with application rates of 0, 3, and 9 Mg ha^‐1, with a total of five treatments, i.e., one control and two rates of application of each kind of lime. The results showed an increase in the aggregate stability. As a consequence, a significant linear correlation was found between aggregate mean weighted diameter (MWD) and calcium content and other indices affected by liming such as pH, sum of bases, base saturation and aluminum content. An increase in the stability indices (MWD) resulted in an increase in the water retained at 0.03 MPa and 0.1 MPa.     

Effects of ploughless tillage and straw incorporation on evaporation

The effects of ploughness tillage (stubble cultivation with a disc tiller or a spring tine cultivator, or with both in combination, replacing mouldboard ploughing) on evaporation were investigated using undisturbed soil lysimeters (height = 350 mm, diameter = 300 mm) excavated after spring cultivation in May from field experiments in eastern Sweden. The evaporation process was measured on ploughed and unploughed soil lysimeters, both with or without precipitation and with or without a seedbed. The effects on evaporation of incorporating crop residues with or without precipitation into a ploughed seedbed were also measured. The results from a heavy clay and from a silty clay loam showed that both ploughless tillage and incorporated straw reduced cumulative evaporation. The water-conserving effect was greater in irrigated treatments. The positive effect on water conservation was also greater on the silty clay loam than on the heavy clay. The soil structural changes brought about by ploughless tillage in layers under the seedbed acted to reduce the rate of evaporation from soil.     

浙江中部红壤施用石灰对土壤交换性钙、镁及土壤酸度的影响

为了确定红壤施用石灰后钙、镁移动和土壤酸化速率,监测了耕层（10～20ｃｍ）和底土（20～60ｃｍ）的ｐＨ和交换性Ca2+、Mg2+、Al2+的长期变化。结果表明,耕层交换性Ca2+在施用石灰后的一年半时间达到最高值,此后随着时间的推移而急剧减少;而底土的交换性Ca2+随石灰用量的增加和施用石灰后时间的推移而增加。镁在土壤剖面中的移动比钙快;施用石灰后耕层和底土酸度的降低与交换性Ca2+的增加基本同步。在本试验条件下,不论施用石灰与否都存在着复酸化过程,但施用石灰后复酸化作用更强。     

Spatial distributions of soil chemical and physical properties prior to planting soybean in soil under ridge‐, no‐ and conventional‐tillage in a maize–soybean rotation

Detailed information on the profile distributions of agronomically important soil properties in the planting season can be used as criteria to select the best soil tillage practices. Soil cores (0–60 cm) were collected in May, 2012 (before soybean planting), from soil transects on a 30‐yr tillage experiment, including no‐tillage (NT), ridge tillage (RT) and mouldboard plough (MP) on a Brookston clay loam soil (mesic Typic Argiaquoll). Soil cores were taken every 19 cm across three corn rows and these were used to investigate the lateral and vertical profile characteristics of soil organic carbon (SOC), pH, electrical conductivity (EC), soil volumetric water content (SWC), bulk density (BD), and penetration resistance (PR). Compared to NT and MP, the RT system resulted in greater spatial heterogeneity of soil properties across the transect. Average SOC concentrations in the top 10 cm layer were significantly greater in RT than in NT and MP (P = 0.05). NT soil contained between 0.8 and 2.5% (vol/vol) more water in the top 0–30 cm than RT and MP, respectively. MP soil had lower PR and BD in the plough layer compared to NT and RT soils, with both soil properties increasing sharply with depth in MP. The RT had lower PR relative to NT in the upper 35 cm of soil on the crop rows. Overall, RT was a superior conservation tillage option than NT in this clay loam soil; however, MP had the most favourable soil conditions in upper soil layers for early crop development across all treatments.     

Optimum Soil Acidity Indices for Dry Bean Production on an Oxisol in No‐Tillage System

Abstract

Soil acidity is one of the major yield constraints to crop production in various parts of the world. Quantifying optimum soil acidity indices is an important strategy for achieving maximum economic crop yields on acid soils. Five field experiments were conducted for three consecutive years using dry bean as a test crop on an Oxisol. The lime rates used were 0, 12, and 24 Mg ha^?1 for creating a wide range of soil acidity indices in a no‐tillage cropping system. Grain yield of dry bean was significantly increased by improving soil pH, base saturation, calcium (Ca), magnesium (Mg), and potassium (K) saturation and reducing aluminum (Al) saturation. These soil acidity indices were higher in the 0‐ to 10‐cm soil layer than the 10‐ to 20‐cm soil layer for maximum grain yield. Across two soil depths, optimum values for maximum bean yield were pH 6.5, base saturation 67%, Ca saturation 48%, and Mg saturation 19%. Bean yield linearly increased with increasing K saturation in the range of 1.5 to 3% across two soil depths. There was a significant linear decrease in grain yield with increasing Al saturation in the range of 0 to 8% across two soil depths. Optimal values of soil indices for maximum bean yield can be used as a reference for liming and improving yield of bean crop on Oxisols in a no‐tillage cropping system. Yield components, such as pod number, grain per pod, and 100‐grain weight were significantly improved with liming, and bean yield was significantly associated with these yield components.