Evaluation of Mercury,Lead, Arsenic,and Cadmium in Some Species of Fish in the Atrato River Delta,Gulf of Urabá, Colombian Caribbean

The concentrations of mercury, lead, cadmium, and arsenic were evaluated in 96 samples, 12 by each one of the following eight fish species: snook (Centropomus undecimalis), crevalle jack (Caranx hippos), Serra Spanish mackerel (Scomberomorus brasiliensis), southern red snapper (Lutjanus purpureus), blue runner (Caranx crysos), Atlantic tarpon (Megalops atlanticus), ladyfish (Elops saurus), and Atlantic goliath grouper (Epinephelus itajara), which were collected during 1 year in the Atrato River Delta in the Gulf of Urabá, Colombian Caribbean. Three fish were caught from each of the following sites the community usually uses to catch them (known as fishing grounds): Bahía Candelaria, Bahía Marirrío, Bocas del Roto, and Bocas del Atrato. The quantification of metals was performed by microwave-induced plasma-optical emission spectrometry. The Pb concentration fluctuated from 0.672 to 3.110 mg kg^?1, surpassing the maximum permissible limit (MPL?=?0.3 mg kg^?1) for human consumption for all species. The Hg concentration ranged between < Limit of detection and 6.303 mg kg^?1, and in the crevalle jack and Atlantic tarpon, concentrations exceeded the MPL (0.5 mg kg^?1). The levels of Cd and As were not significant in the studied species and did not exceed the MPL (0.05 mg kg^?1).     

Chemical Behavior of U(VI) in the Presence of Soil Components

Soil components from different environments (forest (OF), semiarid (SZ), and sand (AS)) were separated from fulvic and humic substances, characterized by DRX, EDS(SEM), and zero-charge points were determined. The sorption of U(VI) by these materials was determined considering contact time, concentration of U(VI), pH, ionic strength, and presence of sodium chloride and humic acids. The time to reach the kinetic sorption equilibrium was ca. 1 min for the components of the SZ and AS soils, whereas those from OF required longer times. The zero-charge points of the materials indicate that in the experimental conditions, the surfaces of the materials are positively charged, as are uranyl ions. The sorption kinetic data were well fitted to the pseudo-second-order model, which indicates chemical sorption. The maximum sorption capacities for U(VI) obtained from data fitted to the Langmuir model of OF and SZ were 49 and 19.8 mg g^?1 respectively. Sorption isotherm data for AS were best fitted to the Freundlich model (q_e?=?5.4 mg g^?1). The maximum values of distribution coefficients (K_d) were 23?±?7 L kg^?1, 545?±?64 L kg^?1, and 1178?±?229 L kg^?1 for AS, SZ, and OF, respectively; these values may depend on pH, contact time, initial concentration of U(VI), and the composition of the materials. Sodium chloride in the aqueous solutions affects U(VI) sorption by the materials SZ and AS. The effect of humic acids depends on pH, only in acid media soluble humate complexes may be formed.     

Effects of Single,Binary and Quinary Mixtures of Phenanthrene and Its N-PAHs on <Emphasis Type="Italic">Eisenia fetida</Emphasis> in Soil

It is now acknowledged that aromatic hydrocarbons present in contaminated soils occur in mixtures. The effect of single, binary and quinary mixtures of phenanthrene and selected nitrogen-containing polycyclic aromatic hydrocarbons (N-PAHs) were investigated on the survival, growth and behavioural index of earthworms (Eisenia fetida) over a 21-day incubation in soil. The results showed that the LC₅₀ values ranged from (not detected) ND–329.3 mg kg^?1 (single mixture), ND–219.8 mg kg^?1 (binary mixtures) to 148.4 mg kg^?1 (quinary mixture), while the EC₅₀ values (based on weight loss) ranged from 13.3–148.4 mg kg^?1 (single mixture), 63.8–148.4 mg kg^?1 (binary mixture) to 24.2 mg kg^?1 (quinary mixture). Greater impacts were recorded where N-PAHs are present with phenanthrene. Further, behavioural index of E. fetida was affected after 24-h exposure to N-PAH-amended soils. Among the N-PAHs however, benzo[h]quinoline recorded the greatest impact on the survival, growth and behavioural index of E. fetida in soil. Findings from this study showed that three ring-N-PAHs are more toxic than phenanthrene as expected from their physico-chemical properties. The binary and quinary mixtures of phenanthrene and N-PAHs in soil intensified toxicity, suggesting that PAHs-N-PAHs mixtures represent greater risk to soil biota.     

Arbuscular mycorrhizal fungi optimize the acquisition and translocation of Cd and P by cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L.) plant cultivated on a Cd-contaminated soil

Purpose

Fruiting vegetables are generally considered to be safer than other vegetables for planting on cadmium (Cd)-contaminated farms. However, the risk of transferring Cd that has accumulated in the stems and leaves of fruiting vegetables is a major issue encountered with the usage of such non-edible parts. The objective of this study was to resolve the contribution of arbuscular mycorrhizal (AM) fungi to the production of low-Cd fruiting vegetables (focusing on the non-edible parts) on Cd-contaminated fields.

Materials and methods

An 8-week pot experiment was conducted to investigate the acquisition and translocation of Cd by cucumber (Cucumis sativus L.) plants on an unsterilized Cd-contaminated (1.6 mg kg^?1) soil in response to inoculation with the AM fungus, Funneliformis caledonium (Fc) or Glomus versiforme (Gv). Mycorrhizal colonization rates of cucumber roots were assessed. Dry biomass and Cd and phosphorus (P) concentrations in the cucumber shoots and roots were all measured. Soil pH, EC, total Cd, phytoavailable (DTPA-extractable) Cd, available P, and acid phosphatase activity were also tested.

Results and discussion

Both Fc and Gv significantly increased (P?<?0.05) root mycorrhizal colonization rates and P acquisition efficiencies, and thus the total P acquisition and biomass of cucumber plants, whereas only Fc significantly increased (P?<?0.05) soil acid phosphatase activity and the available P concentration. Both Fc and Gv significantly increased (P?<?0.05) root to shoot P translocation factors, inducing significantly higher (P?<?0.05) shoot P concentrations and shoot/root biomass ratios. In contrast, both Fc and Gv significantly decreased (P?<?0.05) root and shoot Cd concentrations, resulting in significantly increased (P?<?0.05) P/Cd concentration ratios, whereas only Gv significantly decreased (P?<?0.05) the root Cd acquisition efficiency and increased (P?<?0.05) the root to shoot Cd translocation factor. Additionally, AM fungi also tended to decrease soil total and phytoavailable Cd concentrations by elevating plant total Cd acquisition and soil pH, respectively.

Conclusions

Inoculation with AM fungi increased the P acquisition and biomass of cucumber plants, but decreased plant Cd concentrations by reducing the root Cd acquisition efficiency, and resulted in a tendency toward decreases in soil phytoavailable and total Cd concentrations via increases in soil pH and total Cd acquisition by cucumber plants, respectively. These results demonstrate the potential application of AM fungi for the production of fruiting vegetables with non-edible parts that contain low Cd levels on Cd-contaminated soils.

     

Response of CaCl<Subscript>2</Subscript>-extractable heavy metals,polychlorinated biphenyls,and microbial communities to biochar amendment in naturally contaminated soils

Purpose

Biochar can be used to reduce the bioavailability and leachability of heavy metals, as well as organic pollutants in soils through adsorption and other physicochemical reactions. The objective of the study was to determine the response of microbial communities to biochar amendment and its influence on heavy metal mobility and PCBs (PCB52, 44, 101, 149, 118, 153, 138, 180, 170, and 194) concentration in application of biochar as soil amendment.

Materials and methods

A pot (macrocosm) incubation experiment was carried out with different biochar amendment (0, 3, and 6 % w/w) for 112 days. The CaCl₂-extractable concentration of metals, microbial activities, and bacterial community were evaluated during the incubation period.

Results and discussion

The concentrations of 0.01 M CaCl₂-extractable metals decreased (p?>?0.05) by 12.7 and 20.5 % for Cu, 5.0 and 15.6 % for Zn, 0.2 and 0.5 % for Pb, and 1.1 and 8.9 % for Cd, in the presence of 3 and 6 % of biochar, respectively, following 1 day of incubation. Meanwhile, the total PCB concentrations decreased from 1.23 mg kg^?1 at 1 day to 0.24 mg kg^?1 at 112 days after 6 % biochar addition, representing a more than 60 % decrease relative to untreated soil. It was also found out that biochar addition increased the biological activities of catalase, phosphatase, and urease activity as compared with the controls at the same time point. Importantly, the Shannon diversity index of bacteria in control soils was 3.41, whereas it was 3.69 and 3.88 in soils treated with 3 and 6 % biochar soil. In particular, an increase in the number of populations with the putative ability to absorb PCB was noted in the biochar-amended soils.

Conclusions

The application of biochar to contaminated soils decreased the concentrations of heavy metals and PCBs. Application of biochar stimulated Proteobacteria and Bacteroides, which may function to absorb soil PCB and alleviate their toxicity.

     

Tillage system affects fertilizer-induced nitrous oxide emissions

Since the development of effective N₂O mitigation options is a key challenge for future agricultural practice, we studied the interactive effect of tillage systems on fertilizer-derived N₂O emissions and the abundance of microbial communities involved in N₂O production and reduction. Soil samples from 0–10 cm and 10–20 cm depth of reduced tillage and ploughed plots were incubated with dairy slurry (SL) and manure compost (MC) in comparison with calcium ammonium nitrate (CAN) and an unfertilized control (ZERO) for 42 days. N₂O and CO₂ fluxes, ammonium, nitrate, dissolved organic C, and functional gene abundances (16S rRNA gene, nirK, nirS, nosZ, bacterial and archaeal amoA) were regularly monitored. Averaged across all soil samples, N₂O emissions decreased in the order CAN and SL (CAN?=?748.8?±?206.3, SL?=?489.4?±?107.2 μg kg^?1) followed by MC (284.2?±?67.3 μg kg^?1) and ZERO (29.1?±?5.9 μg kg^?1). Highest cumulative N₂O emissions were found in 10–20 cm of the reduced tilled soil in CAN and SL. N₂O fluxes were assigned to ammonium as source in CAN and SL and correlated positively to bacterial amoA abundances. Additionally, nosZ abundances correlated negatively to N₂O fluxes in the organic fertilizer treatments. Soils showed a gradient in soil organic C, 16S rRNA, nirK, and nosZ with greater amounts in the 0–10 than 10–20 cm layer. Abundances of bacterial and archaeal amoA were higher in reduced tilled soil compared to ploughed soils. The study highlights that tillage system induced biophysicochemical stratification impacts net N₂O emissions within the soil profile according to N and C species added during fertilization.     

Nitrogen transformation rates and N<Subscript>2</Subscript>O producing pathways in two pasture soils

Purpose

Better understanding of N transformations and the regulation of N₂O-related N transformation processes in pasture soil contributes significantly to N fertilizer management and development of targeted mitigation strategies.

Materials and methods

¹⁵N tracer technique combined with acetylene (C₂H₂) method was used to measure gross N transformation rates and to distinguish pathways of N₂O production in two Australian pasture soils. The soils were collected from Glenormiston (GN) and Terang (TR), Victoria, Australia, and incubated at a soil moisture content of 60% water-filled pore space (WFPS) and at temperature of 20 °C.

Results and discussion

Two tested pasture soils were characterized by high mineralization and immobilization turnover. The average gross N nitrification rate (n_tot) was 7.28 mg N kg^?1 day^?1 in TR soil () and 5.79 mg N kg^?1 day^?1 in GN soil. Heterotrophic nitrification rates (n_h), which accounting for 50.8 and 41.9% of n_tot, and 23.4 and 30.1% of N₂O emissions in GN and TR soils, respectively, played a role similar with autotrophic nitrification in total nitrification and N₂O emission. Denitrification rates in two pasture soils were as low as 0.003–0.004 mg N kg^?1 day^?1 under selected conditions but contributed more than 30% of N₂O emissions.

Conclusions

Results demonstrated that two tested pasture soils were characterized by fast N transformation rates of mineralization, immobilization, and nitrification. Heterotrophic nitrification could be an important NO₃^?–N production transformation process in studied pasture soils. Except for autotrophic nitrification, roles of heterotrophic nitrification and denitrification in N₂O emission in two pasture soils should be considered when developing mitigation strategies.

     

Enhanced <Emphasis Type="Italic">Scirpus triqueter</Emphasis> phytoremediation of pyrene and lead co-contaminated soil with alkyl polyglucoside and nitrilotriacetic acid combined application

Purpose

This study aimed to evaluate the effect of combination of alkyl polyglucoside (APG) and nitrilotriacetic acid (NTA) on improving the efficiency of phytoremediation for pyrene and lead (Pb) co-contaminated soil by Scirpus triqueter.

Materials and methods

Seedlings of S. triqueter with a similar size and biomass (3 g/pot) were grown on 2-month aged soil contaminated with 184.5 mg kg^?1of pyrene and 454.3 mg kg^?1 of Pb at pH?=?8.3. After growth for 10 days, different doses of APG and NTA were added into the soil. After 60 days, the height of plants, Pb concentrations in plants, and pyrene amounts in soil were determined.

Results and discussion

Combined application of NTA and APG with lower dosage (1 + 1 g kg^?1 soil and 1 + 2 g kg^?1 soil) had no notable negative influence on the growth of S. triqueter. Moreover, significant synergy on Pb accumulation in S. triqueter was achieved with APG and NTA combined application. Besides, the dissipation of pyrene from soil after 60-day planting was increased in APG and NTA treatments when compared with the control treatments. Application of APG alone or combined with NTA had greater effect on enhancing dissipation of pyrene from soil than NTA alone.

Conclusions

This study demonstrated that the remediation of Pb and pyrene co-contaminated soil by S. triqueter can be enhanced by combined application of APG and NTA. Long-term evaluation of this strategy is needed in co-contaminated field sites.

     

Pine Bark Amendment to Promote Sustainability in Cu-Polluted Acid Soils: Effects on <Emphasis Type="Italic">Lolium perenne</Emphasis> Growth and Cu Uptake

The establishment of a complementary grass cover on vineyard soils can promote sustainability of the affected environment. In this work, we used an acid vineyard soil with total Cu concentration 188 mg kg^?1 to study the influence of pine bark amendment on Lolium perenne growth and Cu uptake. The results indicate that the pine bark amendment did not cause a significant increase in the mass of the shoots of Lolium perenne, but favored the root biomass: 0.034 g for control and 0.061 g for soil samples amended with 48 g kg^?1 of pine bark. Moreover, the pine bark amendment decreased Cu concentration in both, shoots (50 mg kg^?1 for control soil and 29 mg kg^?1 for soil amended with 48 g kg^?1 pine bark) and roots (250 mg kg^?1 for control soil and 64 mg kg^?1 for soil amended with 48 g kg^?1 pine bark). The main factor responsible for these results was a significant decrease of the most mobile fractions of Cu in the soil. Those fractions were extracted using ammonium acetate, ammonium chloride, sodium salt of ethylene-diamine-tetraacetic acid (EDTA-Na), and diethylene-triamine-pentaacetic acid (DTPA).     

Effects of TiO<Subscript>2</Subscript> Nanoparticles on the Neotropical Cladoceran <Emphasis Type="Italic">Ceriodaphnia silvestrii</Emphasis> by Waterborne and Dietary Routes

The impact of nanoparticles (NPs) in zooplankton is poorly studied, particularly when organisms are exposed through diet. Food, constituted mainly by unicellular algae, can act as an important route of contamination for zooplankton. Since unicellular algae have a high surface area in relation to their volume, NPs can interact with their cell membranes and walls, as well as with exopolysaccharides secreted by them. In the present research, we investigated both the acute effects of waterborne titanium dioxide nanoparticles (TiO₂ NPs), and its chronic effects via dietary exposure on the Neotropical freshwater zooplankton Ceriodaphnia silvestrii Daday, 1902 (Crustacea: Cladocera). The observed acute effects served as support for chronic tests, in which we investigated the effects of TiO₂ NPs on survival and life history parameters (body length, numbers of eggs, and neonates produced) of cladoceran adult females, using the freshwater cosmopolitan chlorophycean Raphidocelis subcapitata as source of contamination of TiO₂ NPs for zooplankton. R. subcapitata cells were exposed to concentrations of 0, 0.01, 1, and 10 mg L^?1 of TiO₂ NPs for 96 h, and then provided as food for females of C. silvestrii until the third brood was released. Significant toxic effects were observed in body length and total number of neonates and eggs produced by females of C. silvestrii at concentrations of 1 and 10 mg L^?1 of TiO₂ NPs. Survival was the most sensitive parameter when exposure was given via food. From the concentration of 0.01 mg L^?1 of TiO₂ NPs, there was a decrease in the survival of C. silvestrii females. The quantification of TiO₂ NPs in algae evidenced that they have retained NPs in their cells, being, therefore, an important route of exposure and toxicity of TiO₂ NPs to the studied microcrustacean.     

Trace metals in the soils of Water Conservation Area of Florida Everglades: Considerations for ecosystem restoration

Purpose

Inorganic contaminants present a major challenge for the restoration of aquatic ecosystems. The objectives of this study were to determine the extent of trace metal contamination and investigate the influence of different plant communities on trace metal accumulation in the soils of the Florida Everglades.

Materials and methods

Soil samples (n?=?117) were collected from 0 to 10-cm depth using a stainless steel coring device from sites with three dominant plant communities—cattail, sawgrass, and slough—of Water Conservation Area-2A (43,281 ha) of Florida Everglades.

Results and discussion

The mean pH in soils collected from three plant communities was 6.75–6.82, whereas electrical conductivity was slightly greater in the sawgrass (0.69 dS m^?1) than cattail (0.58 dS m^?1) and slough (0.40 dS m^?1). Mean reduction–oxidation potential was greatest in cattail (?113 mV) than sawgrass (?85.3 mV) and slough (?48.3 mV) soils. Among 11 trace metals (As, B, Co, Cr, Cu, Mn, Mo, Na, Ni, Pb, Zn) found in soil samples, Na had the greatest contents and was greater in cattail (2070 mg kg^?1) and sawgrass (1735 mg kg^?1) than slough (1297 mg kg^?1). Four trace metals (B, Cu, Mo, Ni) were significantly greater in cattail than sawgrass and slough. Whereas, Mn was significantly lower in cattail (31 mg kg^?1) than both sawgrass (84 mg kg^?1) and slough (51 mg kg^?1). Cattail also had significantly lower Cr (1.97 mg kg^?1) and Pb (10 mg kg^?1) than sawgrass (Cr 2.5 mg kg^?1; Pb 20.8 mg kg^?1). As (<6.9 mg kg^?1), Co (<1.3 mg kg^?1), and Zn (<17.2 mg kg^?1) were not significantly different among soils collected from three plant community-dominant sites. Contents of Cd and Se were below the method detection limits (Cd 0.01 mg L^?1; Se 0.2 mg L^?1) and are not reported.

Conclusions

None of the trace metals in the soils exceeded the US Environmental Protection Agency sediment toxicity thresholds. Results from this study provided baseline concentrations of trace metals, which can be used to measure the success of restoration efforts in Florida Everglades.

     

Geochemical monitoring of organic and inorganic pollutants in the sediment of the Eastern Posavina (Serbia)

Purpose

The aim of this study was to obtain a complete picture of the geochemical character of the sediment in the eastern Posavina region, Serbia, an area which has thus far not been systematically investigated. Geological mapping and impact assessment were thus carried out for this area.

Materials and methods

Sediments were sampled (from 0 to 0.5 m depth) in four locations in eastern Posavina between 2002 and 2014. Eight heavy metals (Ni, Zn, Cd, Cr, Cu, Pb, As and Hg) and a wide variety of organic parameters (16 EPA polycyclic aromatic hydrocarbons (PAHs), mineral oils, selected pesticides and polychlorinated biphenyls (PCBs)) were monitored. Metals were analysed by flame and graphite atomic absorption spectrometry, and gas chromatography with mass detection was used for the PAH analyses. The origins of the monitored substances were classified using geoaccumulation index (I _geo), ecological risk index (RI) and principal component analysis (PCA/FA).

Results and discussion

The sediments all contained higher heavy metals concentrations than the upper continental crust (UCC), suggesting dynamic natural and anthropogenic processes in this unique region. Significant variations (RSD values from 13 to 190) were observed for Cd (0.001–80.00 mg kg^?1), Hg (0.01–5.40 mg kg^?1), mineral oil (2.00–1851 mg kg^?1) and the sum of 16 EPA PAHs (0.003–5.57 mg kg^?1). The I _geo index classified the pollution risk due to Cr as strong, Cd, Zn and Hg as moderate to strong and Ni as moderate. Based on PCA/FA analysis, the parameters were grouped somewhat differently, with anthropogenic activity found to be responsible for much of the Hg, Cd and Cr pollution present in the sediments.

Conclusions

The analysis revealed eight heavy metals (Ni, Zn, Cd, Cr, Cu, Pb, As and Hg), the sum of 16 EPA PAHs and mineral oil as parameters of great interest for this unique region. These parameters must be the focus of future monitoring programs, in support of appropriate remediation techniques and/or dredging activities, which are required in order to comply with the new Serbian regulations and the relevant EU recommendations.

     

Cadmium contamination of sediments in the water reservoirs in Silesian Upland (southern Poland)

Purpose

Cadmium (Cd) is considered a toxic element and its concentrations are relevant to human health and the environment. Therefore, the purpose of the study was to determine the extent to which the bottom sediments of water bodies (artificial lakes and ponds) in the Silesian Upland in southern Poland are contaminated with Cd; an attempt was also made to determine the factors that condition spatial differences in the concentration of this element between individual water bodies in the region.

Materials and methods

Measurements of the Cd content in bottom sediments were carried out in 35 water bodies in southern Poland in 2011 and 2012. Depending on the surface area and morphometric characteristics, from two to nine samples representative in terms of sediment thickness were collected in each water body. Cadmium concentrations were determined for 92 0.25 g aliquots using the TD-ICP method.

Results and discussion

Cadmium content in all samples (0.7–580.0 mg kg^?1) was higher than the natural range of concentrations for this element in the Earth’s crust (0.1–0.3 mg kg^?1) and the geochemical background for Poland (0.5 mg kg^?1) and, with a few exceptions, was also higher than the preindustrial concentration (1.0 mg kg^?1) and the regional geochemical background (2.5 mg kg^?1). Adopting natural Cd concentrations in the Earth’s crust (0.1–0.3 mg kg^?1) as the baseline for the geoaccumulation index (I_geo), the sediments examined can be classified as extremely and heavily contaminated (and moderately contaminated in a small number of cases). The assessment of sediment quality based on I_geo, with the regional geochemical background (2.5 mg kg^?1) adopted as the baseline, results in non-contaminated and moderately contaminated sediments being dominant with a far smaller number of heavily and extremely contaminated ones.

Conclusions

In the case of several water bodies, Cd concentrations were at record levels that have not been found anywhere else in the world. On the basis of the I_geo, sediments of varying quality were found—from virtually uncontaminated to extremely contaminated. The I_geo index as an indicator of the quality of bottom sediments is a measure that requires careful interpretation, especially when different concentration levels regarded as natural are used for determining its value.

     

Grasses and legumes facilitate phytoremediation of metalliferous soils in the vicinity of an abandoned chromite–asbestos mine

Purpose

The present study was carried out in Roro region, Chaibasa, Jharkhand, India, to assess the impact of chromite–asbestos mine waste (CMW) on a nearby agroecosystem. The role of metal-accumulating grass–legume association in facilitating phytoremediation was investigated.

Materials and methods

Soil and plant samples were collected from (i) chromite–asbestos mine waste (CMW) with Cynodon dactylon, Sorghastrum nutans, and Acacia concinna; (ii) contaminated agricultural soil-1 (CAS1) from a foothill with Cajanus cajan; (iii) contaminated agricultural soil-2 (CAS2) distantly located from the hill, cultivated with Oryza sativa and Zea mays; and (iv) unpolluted control soil (CS). Total metal concentrations were quantified in both soils and plants by digesting the samples using HNO₃, HF, HClO₄ (5:1:1; v/v/v), and HNO₃ and HClO₄ (5:1; v/v), respectively, and analyzed under flame atomic absorption spectrophotometry. Metal grouping and site grouping cluster analysis was executed to group the metals and sampling sites. Translocation factor (TF) and bioconcentration factor (BCF) were calculated to determine the phytoremediation efficiency of grasses and legumes.

Results and discussion

Results indicate that total metal concentrations in the CMW were in the order of Cr?>?Ni?>?Mn?>?Cu?>?Pb?>?Co?>?Zn?>?Cd. High concentrations of Cr (1983 mg kg^?1) and Ni (1293 mg kg^?1) with a very strong contamination factor were found in the CAS, which exceeds the soil threshold limits. Further, metal and site grouping cluster analysis also revealed that Cr and Ni were closely linked with each other and the CMW was the main source of contamination. Among all the metals, Cr and Ni were mainly accumulated in grasses (C. dactylon and S. nutans) and legumes (A. concinna and C. cajan) as compared to cereals (Z. mays and O. sativa). The TF of Cr was >1 for grasses. Except for Zn, the BCF for all the metals were <1 in roots and shoots of all the plants and cereals.

Conclusions

The present study revealed that abandoned CMW is the source of contamination for agriculture lands. Phytoremediation relies on suitable plants with metal-scavenging properties. Grass–legume cover (C. dactylon, S. nutans, A. concinna, and C. cajan) has the ability to accumulate metals and act as a potential barrier for metal transport, which facilitate the phytoremediation of the CMW. Possibilities for enhancing the barrier function of the grass–legume cover need to be explored with other low-cost agronomic amendments and the role of rhizospheric organisms.

     

Rapid estimation of microbial biomass in acid red soils with and without substrate incorporation

Purpose

A rapid and alternative measurement of microbial biomass in acid red soils with and without substrate incorporation is proposed for soil quality evaluation.

Materials and methods

Soil microbial biomass C (SMBC) and N (SMBN) in 24 typical red soil samples developed from two parent materials (granite and arenaceous shale) were measured using fumigation-extraction followed by dry combustion method in comparison with ultraviolet (UV) spectrophotometry (increase in absorbance at 280 nm, ΔUV₂₈₀). The reliability of microbial biomass estimation by UV spectrophotometry was verified using six representative red soils amended with biochar (0, 1, 3 and 5%) and glucose (0, 100, 500 and 1000 mg kg^?1) separately.

Results and discussion

ΔUV₂₈₀ was strongly correlated with SMBC and SMBN measured by dry combustion, regardless of biochar/glucose incorporation. Validated conversion equations from unamended soil data were dependent on confounding effects of organic C and particle size and can be described as follows: SMBC?=?27.08?×?ΔUV₂₈₀ (R²?=?0.67, n?=?24) and SMBN?=?3.62?×?ΔUV₂₈₀ (R²?=?0.69, n?=?24). Regression models for rapid estimation of microbial biomass in red soils from different parent materials had to be calibrated separately in case of amendments. In most cases, SMBC (R² of 0.75–0.76 and root mean square error (RMSE) of 22.2–29.3 mg kg^?1) and SMBN (R² of 0.74–0.80 and RMSE of 2.60–14.2 mg kg^?1) can be predicted from ΔUV₂₈₀ in biochar/glucose-amended soils using these equations. The slope of the regression of SMBC against ΔUV₂₈₀ shifted in biochar-amended granite soils, mainly due to uncoordinated changes of SMBC in response to the difference in parent material-induced nutrient availability, while shifts of SMBC (or SMBN) against ΔUV₂₈₀ in glucose-amended arenaceous shale soils were attributed to particle size distribution.

Conclusions

Soil microbial biomass (SMBC and SMBN) in red soils can be rapidly predicted by fumigation-extraction with UV spectrophotometry detection and corresponding correction of calibration curves, depending on soil nutrient availability, particle size distribution and organic C levels.

     

Estimation of natural outcrossing rate and genetic diversity in Lima bean (<Emphasis Type="Italic">Phaseolus lunatus</Emphasis> L. var. <Emphasis Type="Italic">lunatus</Emphasis>) from Brazil using SSR markers: implications for conservation and breeding

Lima bean (Phaseolus lunatus L.) is an important food source in Brazil, especially in the northeast region, where its production and consumption are high. The goals of the present study were to estimate natural outcrossing rates and genetic diversity levels of Lima bean from Brazil, using ten microsatellite loci to obtain information for their conservation and breeding. Fourteen accessions were selected from an experiment in field with open-pollinated and with the presence of pollinating insects. Twelve seeds of each of the 14 selected accessions were grown in screenhouse for tissue harvest and DNA extraction. The multilocus model was used to determine the reproductive system. The outcrossing rate was 38.1 % (t_m = 0.381; t_s = 0.078), and the results indicated a mixed mating system with a predominance of selfing (1 ? t_m = 61.9 %). The biparental inbreeding rate was high (t _m  ? t _s  = 0.303) and the multilocus correlated paternity was quite high (r _p(m) = 0.889), indicating that the progeny was mostly composed of full sibs. The average effective number of pollen donors per maternal plant (N _ep ) was low (1.12), and the fixation index for maternal genotypes (F _m ) was 0.945, indicating that most genitors resulted from inbreeding. The studied families presented considerable genetic variability: A = 6.10;  %P = 30; H _e  = 0.60 and H _o  = 0.077. Total diversity was high (H _T = 0.596), and a portion was distributed within families (H _S = 0.058). In addition, diversity was higher between families (D _ST = 0.538), and genetic differentiation was high (G _ST = 0.902). The results presented here can be used in the implementation of Lima bean conservation and breeding programs in Brazil.     

Manganese (II) Removal from Aqueous Solutions by <Emphasis Type="Italic">Bacillus cereus</Emphasis>: an Optimization Study Using Experimental Design and Response Surface Methodology

The present study was carried out in order to investigate the removal of soluble Mn²⁺ from an aqueous solution using Bacillus cereus. A manganese aqueous solution at 50 mg L^?1 was treated, and the product was less than 1 mg L^?1 of residual concentration, which complied with environmental regulations. Before the optimization, B. cereus was able to remove Mn²⁺ ions from an aqueous solution; however, the residual content was around 2.5 mg L^?1. Screening experiments aiming at defining the effects of the growth medium composition indicated that both casamino acid-peptone and yeast extract contributed to manganese removal. These experiments also showed the interaction between these two components of the culture media, nevertheless the use of glucose did not prove significant. Considering these observations, the Doehlert design was used to generate a response surface. The model was significant with the p value lower than 0.05 and the lack-of-fit not significant (p > 0.05). The optimized composition of the growth medium was defined as 0.5 g L^?1 of casamino acid-peptone and 0.25 g L^?1 of yeast extract, whereas glucose could be removed from the original growth medium. When the optimized condition of the growth medium was used, the time required for manganese removal was reduced from 21 to 8 days. After optimization, B. cereus was capable of producing high manganese removal, reducing the residual concentration to levels below 1.0 mg L^?1.     

Enhanced dissipation of DEHP in soil and simultaneously reduced bioaccumulation of DEHP in vegetable using bioaugmentation with exogenous bacteria

The widely used plastic film containing di(2-ethylhexyl) phthalate (DEHP) in agriculture has caused serious soil pollution and poses risks to human health through the food chain. An effective DEHP degradation bacteria, Microbacterium sp. J-1, was newly isolated from landfill soil. Response surface methodology was successfully employed for optimization resulting in 96% degradation of DEHP (200 mg L^?1) within 5 days. This strain degraded DEHP by hydrolysis of the ester bond and hydroxylation of the aromatic ring to form 2-ethyl hexanol, mono-(2-ethylhexyl) phthalate, phthalate acid, and protocatechuic acid, and subsequently transformed these compounds with a maximum specific degradation rate (q _max), half-saturation constant (K _s ), and inhibition constant (K _i ) of 1.46 day^?1, 180.2 mg L^?1, and 332.8 mg L^?1, respectively. Bioaugmentation of DEHP-contaminated soils with the strain J-1 greatly enhanced the DEHP dissipation rate (~88%). Moreover, this strain could efficiently colonize the rhizosphere soil of inoculated vegetables and further enhanced DEHP degradation (~97%), leading to a significant decrease (>70%) in DEHP accumulation in shoots and roots of the inoculated vegetables compared to uninoculated vegetables. The results highlighted the roles of the inoculated exogenous bacteria in simultaneously bioremediating contaminated soils and reducing bioaccumulation of DEHP in the edible part of the vegetable for food safety.     

Comparison of Partitioning and Efficacy Between Copper Algaecide Formulations: Refining the Critical Burden Concept

Filamentous mat-forming algae are increasingly impairing freshwater resources. To restore water utility, reactive management programs often involve application of copper-based algaecides. Copper algaecide formulations can differ significantly, and this research outlined an advanced approach to evaluate formulation efficiency for controlling filamentous algae. Two common algal species (Lyngbya wollei, Pithophora varia) were used to assess copper internalization and adsorption as well as relation to control among copper formulations. Captain® XTR achieved control (7-day EC₈₅) of L. wollei with internal copper concentrations of 0.78 and 0.76 mg Cu/g based on chlorophyll a content or filament viability, respectively. Cutrine® Ultra achieved control of L. wollei based on filament viability only at 0.85 mg Cu/g. Internalized copper concentrations required for control following Captain XTR exposures were similar for P. varia, 0.81 and 0.95 mg Cu/g, whereas Cutrine Ultra and copper sulfate did not elicit control nor attain the critical internal copper threshold. The relationship between internalized copper and responses, among all formulations, was significant (P?<?0.0001) with R² values of 0.920 and 0.935 for L. wollei and 0.807 and 0.826 for P. varia based on filament viability and chlorophyll a content, respectively. Formulation efficiency, internalized copper versus total amended, was greatest with Captain XTR (average 0.17), followed by Cutrine Ultra (0.13), and copper sulfate (0.09). By measuring the efficiency of a specific algaecide and the corresponding amount required to achieve control of targeted algal biomass, management objectives can be achieved while decreasing environmental loads of copper, number of treatments, and operational costs.     

Predicting soil loss in central and south Italy with a single USLE-MM model

Purpose

The USLE-MM estimates event normalized plot soil loss, A_e,N, by an erosivity term given by the runoff coefficient, Q_R, times the single-storm erosion index, EI₃₀, raised to an exponent b₁?>?1. This modeling scheme is based on an expected power relationship, with an exponent greater than one, between event sediment concentration, C_e, and the EI₃₀/P_e (P_e = rainfall depth) term. In this investigation, carried out at the three experimental sites of Bagnara, Masse, and Sparacia, in Italy; the soundness of the USLE-MM scheme was tested.

Materials and methods

A total of 1192 (A_e,N, Q_REI₃₀) data pairs were used to parameterize the model both locally and considering all sites simultaneously. The performances of the fitted models were established by considering all erosive events and also by distinguishing between events of different severity.

Results and discussion

The b₁ exponent varied widely among the three sites (1.05–1.44) but using a common exponent (1.18) for these sites was possible. The A_e,N prediction accuracy increased in the passage from the smallest erosion events (A_e,N?≤?1 Mg ha^?1, median error =?3.35) to the largest ones (A_e,N?>?10 Mg ha^?1, median error =?1.72). The Q_REI₃₀ term was found to be usable to predict both A_e,N and the expected maximum uncertainty of this prediction. Soil erodibility was found to be mainly controlled by the largest erosion events.

Conclusions

Development of a single USLE-MM model appears possible. Sampling other sites is advisable to develop a single USLE-MM model for a general use.