Evaluation of the Combined Cr(VI) Removal Capacity of Sawdust and Sawdust-Immobilized Acinetobacter haemolyticus Supplied with Brown Sugar

The purpose of this study is to evaluate the combined Cr(VI) removal capacities of nonliving (untreated rubber wood sawdust, URWS) and living biomass (URWS-immobilized Acinetobacter haemolyticus) in a continuous laboratory scale downward-flow two column system. Synthetic solutions of Cr(VI) between 237 and 320 mg L^?1 were mixed with 1 g L^?1 brown sugar in a nonsterile condition. Final Cr(VI) of between 0 and 1.6 mg L^?1 indicate a Cr(VI) removal capacity of 99.8–100%. The bacterial Cr(VI) reduction capacity increased with column length. This study shows the feasibility of using the two column system consisting of living (bacteria) and nonliving biomass (URWS) as a useful alternative treatment for Cr(VI) contamination in the aqueous system.     

Isolation and characterization of multi-potential Rhizobium strain ND2 and its plant growth-promoting activities under Cr(VI) stress

Soil contaminated by chromium (Cr) is a major concern for sustainable agriculture. Considering this as a basis, the present study was designed to isolate Cr(VI)-reducing and plant growth-promoting bacterial strain from contaminated sampling sources. In this study, Rhizobium strain ND2 was isolated from the root nodules of Phaseolus vulgaris grown in leather industrial effluent contaminated soil. The strain ND2 exhibited strong resistance to different heavy metals and reduced 30 and 50 µg ml^?1 concentrations of Cr(VI) completely after 80 and 120 h of incubation, respectively, as well as chromium adsorption and immobilization were confirmed by scanning electron microscopic equipped with energy X-ray spectroscopy. In addition, the strain produced 21.73 and 36.86 µg ml^?1 of indole-3-acetic acid at 50 and 100 µg ml^?1 of L-tryptophan supplimentations, respectively. Strain ND2 positively affected the exo-polysaccharide, ammonia, protease and catalase production and stimulated root length of various test crops under Cr(VI) stress. Moreover, Rhizobium strain ND2 has the potential to colonize the diverse agricultural crops. Thus, the present findings strongly suggested that the multipotential properties of ND2 could be exploited for bioremediation of contaminated sites with Cr(VI) as well as potential bio fertilizer for enhancing the agricultural productivity.     

Characterization of Reactive Red-120 Decolorizing Bacterial Strain Acinetobacter junii FA10 Capable of Simultaneous Removal of Azo Dyes and Hexavalent Chromium

Continual discharge of textile wastewaters loaded with a variety of synthetic dyes and metals is considered as a huge threat to surrounding ecosystems. In order to treat these undesirable pollutants, microbial bioremediation is considered as an efficient and economical technique. This study was conducted to evaluate the use of bacterial strains for simultaneous removal of azo dyes and hexavalent chromium [Cr(VI)]. Fifty-eight bacterial strains were isolated from Paharang drain wastewater and tested for their potential to decolorize reactive red-120 (RR-120) in the presence of 25 mg L^?1 of Cr(VI). Among the tested isolates, FA10 decolorized the RR-120 most efficiently and was identified as Acinetobacter junii strain FA10. Based on quadratic polynomial equation and response surfaces given by the response surface methodology (RSM), Cr concentration and pH were found to be the main factors governing the RR-120 decolorization by FA10. The strain FA10 also exhibited a substantial salt resistance since it showed a considerable decolorization of RR-120 even in the presence of 150 g L^?1 of NaCl. Moreover, the strain FA10 also showed the potential to simultaneously remove the Cr(VI) and the selected azo dyes in the same medium. More than 80 % of the initially added Cr(VI) was removed over 72 h of incubation along with the appreciable decolorization efficiency. The strain FA10 also exhibited good tolerance to considerable levels of different heavy metals. The findings of this study suggest that the strain FA10 might serve as an efficient bioresource to develop the biotechnological approaches for simultaneous removal of different azo dyes and heavy metals including Cr(VI).     

Chromium Speciation in Water by Sorption on Calcite and Determination by Electrothermal Atomic Absorption Spectrometry

Abstract

A rapid, sensitive, and accurate method for the separation and speciative determination of chromium (Cr)(VI) and Cr(III) in water samples has been developed using sorption as the separation technique in conjunction with final determination by electrothermal atomic absorption spectroscopy (ETAAS). The present method, where granular calcite is used as selective sorbent, separates Cr(III) with retention values up to 99%, resulting in high accuracy determination of Cr(VI). Total Cr was likewise determined by ETAAS after an efficient reduction of Cr(VI) to Cr(III) using ascorbic acid as reducing agent, deriving Cr(III) concentration from the difference between total Cr and Cr(VI). The parameters of the separation technique, solution pH (4.5–5.5), solution flow rate through the calcite column (0.14–0.42 mL min^?1), and calcite column internal diameter (1.5–3.0 cm), were evaluated. Best results were achieved with pH of 5.5, flow rate of 0.42 mL min^?1, and column internal diameter of 1.5 cm. Optimum determination conditions were found using magnesium nitrate [Mg(NO₃)₂] as chemical modifier, pyrolysis, and atomization temperatures of 1400 and 2200°C, respectively. In such conditions, the detection limits (n=10) were 1.5 and 0.8 µg L^?1 for Cr(III) and Cr(VI), respectively.     

Organic Matter Effects on the Cr(VI) Removal Efficiency and Tolerance of <Emphasis Type="Italic">Typha domingensis</Emphasis>

The removal efficiency and tolerance of Typha domingensis to Cr(VI) in treatments with and without organic matter (OM) addition were evaluated in microcosm-scale wetlands. Studied Cr(VI) concentrations were 15 mg L^?1, 30 mg L^?1, and 100 mg L^?1, in treatments with and without OM addition, arranged in triplicate. Controls (without neither metal nor OM addition—without metal with OM addition) were disposed. Cr(VI) was removed efficiently from water in all treatments. OM addition enhanced significantly Cr(VI) and total Cr removals from water. In the treatments with OM addition, significantly higher Cr concentrations were found in sediment than the treatments without OM addition. Plants of the treatments without OM addition showed significantly higher Cr concentrations in tissues but lower biomass increase than the treatments with OM addition. The highest Cr concentrations in tissues were observed in submerged parts of leaves, followed by roots. According to SEM analysis, in the 100 mg L^?1 treatments, the highest Cr accumulation was observed in the epidermis of old leaves. Although Cr(VI) produced changes in root morphology, the OM addition favored the plant growth. In T. domingensis, root morphological plasticity is an important mechanism to improve metal tolerance and Cr uptake in wetland systems minimizing the environmental impact.     

Hexavalent Chromium Removal by Candida sp. in a Concentric Draft-Tube Airlift Bioreactor

The main purpose of this work was to conduct a kinetic study on cell growth and hexavalent chromium [Cr(VI)] removal by Candida sp. FGSFEP in a concentric draft-tube airlift bioreactor. The yeast was batch-cultivated in a 5.2-l airlift bioreactor containing culture medium with an initial Cr(VI) concentration of 1.5 mM. The maximum specific growth rate of Candida sp. FGSFEP in the airlift bioreactor was 0.0244 h^?1, which was 71.83% higher than that obtained in flasks. The yeast strain was capable of reducing 1.5 mM Cr(VI) completely and exhibited a high volumetric rate [1.64 mg Cr(VI) l^?1 h^?1], specific rate [0.95 mg Cr(VI) g^?1 biomass h^?1] and capacity [44.38 mg Cr(VI) g^?1 biomass] of Cr(VI) reduction in the airlift bioreactor, with values higher than those obtained in flasks. Therefore, culture of Candida sp. FGSFEP in a concentric draft-tube airlift bioreactor could be a promising technological alternative for the aerobic treatment of Cr(VI)-contaminated industrial effluents.     

Critical Influence of Culture Medium and Cr(III) Quantification Protocols on the Interpretation of Cr(VI) Bioremediation by Environmental Fungal Isolates

The influence of culture medium composition on chromium(VI) quantification according to diphenylcarbazide (DPC) colorimetric determination was evaluated. Considering the eventual biospeciation of Cr(VI) as a mechanism of microbial bioremediation, the possibility to quantify Cr(III) in culture medium was also explored. Yeast nitrogen base (YNB) was identified as the least interferent culture medium for Cr(VI) quantification by DPC and it was applied to compare different strategies for Cr(III) oxidation. The most appropriate oxidation protocol consisted in the reaction with 80 mM KIO₄ at room temperature for 30 min prior to DPC. Parameters like basal culture medium (vitamins + salts + oligoelements), C and N source were systematically evaluated, either independently or in combination. Results demonstrated that C source was the most interferent culture medium component, being the use of sucrose preferable to glucose. A medium arbitrarily named as YNB′ (YNB without amino acids and ammonium sulfate plus 50 g L^?1 sucrose and 0.6 g L^?1 (NH₄)₂SO₄) was defined for Cr(VI)-amended fungal cultures. Kinetics of growth, Cr(VI) removal, and nutrient consumption for isolates A. pullulans VR-8, filamentous fungus PMF-1, and Lecythophora sp. NGV-1 were obtained. The order of Cr(VI) removal efficiency was as follows: A. pullulans VR-8 > Lecythophora sp. NGV-1 > filamentous fungus PMF-1, and a similar trend was observed for biomass yield and nutrients consumption. Studies on biospeciation by means of the selected Cr(III) oxidation protocol were unsuccessful, leading to Cr(VI) values much lower than expected. It revealed that this kind of protocols should be cautiously evaluated when studying microbial Cr(VI) bioremediation.     

Synthesis and Characterisation of Novel-Activated Carbon from Waste Biomass Pine Cone and Its Application in the Removal of Congo Red Dye from Aqueous Solution by Adsorption

The present study deals with the synthesis and subsequent application of Fe₃O₄@n-SiO₂ nanoparticles for the removal of Cr(VI) from aqueous solutions. Rice husk, an agrowaste material, was used as a precursor for the synthesis of nanoparticles of silica. Synthesized nanoparticles were characterized by XRD and SEM to investigate their specific characteristics. Fe₃O₄@n-SiO₂ nanoparticles were used as adsorbent for the removal of Cr(VI) from their aqueous solutions. The effects of various important parameters, such as initial Cr(VI) concentration, adsorbent dose, temperature, and pH, on the removal of Cr(VI) were analyzed and studied. A pH of 2.0 was found to be optimum for the higher removal of Cr(VI) ions. It was observed that removal (%) decreased by increasing initial Cr(VI) concentration from 1.36?×?10^-2 to 2.4?×?10^-2 M. The process of removal was found to be endothermic, and the removal increased with the rise in temperature from 25 to 45 °C. The kinetic data was better fitted in pseudo-second-order model in comparison to pseudo-first-order model. Langmuir and Freundlich adsorption capacities were determined and found to be 3.78 and 1.89 mg/g, respectively, at optimum conditions. The values of ΔG ⁰ were found to be negative at all temperatures, which confirm the feasibility of the process, while a positive value of ΔH ⁰ indicates the endothermic nature of the adsorption process. The present study revealed that Fe₃O₄@n-SiO₂ nanoparticles can be used as an alternate for the costly adsorbents, and the outcome of this study may be helpful in designing treatment plants for treatment of Cr(VI)-rich effluents.     

Comparison of Several Amendments for In-Site Remediating Chromium-Contaminated Farmland Soil

Hexavalent chromium (Cr(VI)), which has been classified as a Group A human carcinogens list by the United States Environmental Protection Agency, possesses stronger biological toxicity, and its discharge into farmland has become a pressing environmental problems. To screen the cost-efficient Cr(VI)-contaminated soil in situ amended materials, the effects of ordinary zero-valent iron (ZVI), nanoscale zero-valent iron (nZVI), biochar (B), biochar/zero-valent iron (BZVI), and biochar/nanoscale zero-valent iron (BnZVI) on the immobilization of Cr(VI) in spiked soil (Cr(VI) = 325 mg kg^?1, Cr_total = 640 mg kg^?1) were compared in this paper. After 15 days remediation by those materials, toxicity characteristic leaching procedure and physiological-based extraction test showed that the Cr(VI) leachability and bioaccessibility were reduced by 14–92% and 4.3–92% respectively, and the order of immobilization was found to be nZVI > BnZVI > BZVI > ZVI > B. Moreover, sequential extraction procedure indicated that all materials can increase the proportion of the residual Cr, and nZVI had the most significant effect. Plant seedling growth test proved that the nanoscale zero-valent iron was able to reduce the toxicity of chromium in plants greatly in a short time, while BnZVI treatment is more favorable to the growth of plants. To sum up, the nano zero-valent iron and biochar combined treatment not only removed Cr(VI) and immobilized total chromium efficiently but also enabled plant growth in relative high chromium-containing soil.     

Treatment of Cr(VI)-spiked soils using sulfur-based amendments

The objective of this research was to assess the hexavalent chromium (Cr(VI)) reducing efficiency of sulfur-based inorganic agents including calcium polysulfide (CPS), iron sulfide (FeS), pyrite (FeS₂) and sodium sulfide (Na₂S) in three soils. An alkaline soil (soil 1), a neutral soil (soil 2) and a slightly acid soil (soil 3) constituted the investigated soils. The soils were spiked with two levels of Cr(VI) (100 and 500 mg Cr(VI) kg^?1 soil) and incubated at field capacity (FC) for one month. Then, CPS, FeS, FeS₂ and Na₂S were added at 0, 5 and 10 g kg^?1 and the concentrations of exchangeable Cr(VI) were measured after 0.5, 4, 48 and 168 h in a batch experiment. The pH and organic carbon content of the soils played predominant role in Cr(VI) self-reduction by the soil itself. Complete self-reduction of Cr(VI) from soils 1, 2 and 3 was achieved at maximum Cr(VI) levels of 1, 50 and 500 mg kg^?1, respectively. Therefore, the concentration of Cr(VI) should not exceed the given levels in order to ensure that Cr(VI) is not released into the environment from contaminated sites. Moreover, decreasing pH in the alkaline soil caused significant increase of Cr(VI) reducing efficiency. Na₂S, CPS and FeS, in contrast to FeS₂, were efficient Cr(VI) reducing agents in all three soils. For all added amendments the following order of Cr(VI) reducing capacity was observed: Na₂S > CPS > FeS > FeS₂ in soil 1, Na₂S ? CPS ~ FeS > FeS₂ in soil 2 and Na₂S ? FeS > CPS ~ FeS₂ in soil 3.     

Chromium-resistant microorganisms isolated from evaporation ponds of a metal processing plant

Chromium occurs naturally at trace levels in most soils and water, but disposal of industrial waste and sewage sludge containing chromium compounds has created a number of contaminated sites, which could pose a major environmental threat. This study was conducted to enumerate and isolate chromium-resistant microorganisms from sediments of evaporation ponds of a metal processing plant and determine their tolerance to other metals, metalloids and antibiotics. Enumeration of the microbiota of Cr-contaminated sediments and a clean background sample was conducted by means of the dilution-plate count method using media spiked with Cr(VI) at concentrations ranging from 10 to 1000 mg L^?1. Twenty Cr(VI) tolerant bacterial isolates were selected and their resistance to other metals and metalloids, and to antibiotics was assessed using a plate diffusion technique. The number of colony-forming units (cfu) of the contaminated sediments declined with increasing concentrations from 10 to 100 mg L^?1 Cr(VI), and more severely from 100 to 1000 mg L^?1 Cr(VI). The background sample behaved similarly to 100 mg L^?1 Cr(VI), but the cfu declined more rapidly thereafter, and no cfu were observed at 1000 mg L^?1 Cr(VI). Metals and metalloids that inhibited growth (from the most to least inhibitory) were: Hg > Cd > Ag > Mo = As(III) at 50 μg mL^?1. All 20 isolates were resistant to Co, Cu, Fe, Ni, Se(IV), Se(VI), Zn, Sn, As(V), Te and Sb at 50 μg mL^?1 and Pb at 100 μg mL^?1. Eighty-five percent of the isolates had multiple antibiotic resistance. In general, the more metal-tolerant bacteria were among the more resistant to antibiotics. It appears that the Cr-contaminated sediments may have enriched for bacterial strains with increased Cr(VI) tolerance.     

Sorption Characteristics of Chromium and Its Phytotoxic Effect with or without City Compost on Maize and Spinach in a Vertisol of Central India

Abstract

Phytotoxicity, due to chromium [Cr (VI)] additions from low to very high levels in a swell–shrink clayey soil (Haplustert), in maize and spinach was studied in a pot culture experiment. Six levels of Cr (VI) (0, 5, 10, 25, 50, and 75 mg kg^?1 soil) for maize and five levels for spinach (0, 2, 5, 10, and 25 mg kg^?1 soil) were applied singly and in combination with two doses (0 and 20 t ha^?1) of city compost. At levels of more than 75 mg Cr (VI) kg^?1 soil for maize there was virtually no growth after germination, whereas 25 mg Cr (VI) kg^?1 soil hindered the germination of spinach crop. Initial symptoms of Cr (VI) toxicity appeared as severe wilting of the tops of treated plants. Maize plants suffering from severe Cr (VI) toxicity had smaller roots and narrow brownish red leaves covered with small necrotic spots. In spinach, severe chlorosis was observed in leaves. Higher levels of Cr (VI) inhibited the growth and dry‐matter yield of the crops. However, application of city compost alleviated the toxic effect of Cr (VI). The concentration of Cr (VI) in plant parts increased when Cr (VI) was applied singly but decreased considerably when used in combination with city compost. There was evidence of an antagonistic effect of Cr (VI) on other heavy‐metal (Mn, Cu, Zn, and Fe) concentrations in plant tops. Thus, when Cr (VI) concentration increases, the concentration of other beneficial metals decreases. Chromium (VI) concentration in maize roots ranged from traces (control) to 30 mg kg^?1and were directly related to soil Cr (VI) concentration. At 25 mg Cr (VI) kg^?1 soil, yield of maize was reduced to 41% of control plants, whereas in spinach, 10 mg Cr (VI) kg^?1 soil caused a 33% yield reduction. Experimental results revealed that the maize top (cereal) is less effective in accumulating Cr (VI) than spinach (leafy vegetables). Laboratory studies were also conducted to know Cr (VI) sorption capacity of a swell–shrink clayey soil with and without city compost, and it was found that Cr (VI) sorption reaction was endothermic and spontaneous in nature.     

Bioremoval of Surfactant from Laundry Wastewater in Optimized Condition by Anoxic Reactors

Effects of ethanol and nitrate on linear alkyl benzene sulfonate (LAS) degradation were investigated using central composite design. At experimental design, removal of 99.9% was observed in batch reactors (1 L) with 9.8 to 41.2 mg L^?1 of LAS. The batch reactors were kept under agitation at 120 rpm and 30 °C. Ethanol (co-substrate) and nitrate (electron acceptor) were statistically significant factors (p?<?0.05) in surfactant removal. Optimal values were 97.5 and 88 mg L^?1 for ethanol and nitrate, respectively. LAS removal was kinetically investigated by varying surfactant concentration while using optimal values. Batch I (27 mg L^?1 LAS) exhibited greater degradation rate (K^LAS) (0.054 h^?1) in the presence of ethanol and nitrate. Nonetheless, in Batch II (60 mg L^?1 LAS), the K^LAS values decreased in those reactors probably due to inhibition by excess substrate for same concentrations of nitrate and ethanol added in reactors. As LAS concentration increased, the dominance of bacterial populations also increased, whereas diversity index decreased from 2.8 (inoculum) to 2.4 and 2.5 for reactors with both added nitrate and ethanol and those with only added ethanol, respectively. Probably, a selection of microbial populations occurred in relation to LAS concentration. The nitrate and ethanol, at able concentration, made it possible the induction of denitrifying microrganisms foward to LAS removal.     

Occurrence and Geochemistry of Arsenic in Groundwater of Punjab,Northwest India

Abstract

Arsenic (As) is a deadly poison at high concentrations. It is mysterious in the sense that people are exposed to it most of the time through drinking groundwater, fortunately at much lower concentrations than the deadly levels, and usually without knowing it. Arsenic content in alluvial aquifers of Punjab varied from 3.5 to 688 µg L^?1. Arsenic status of groundwater is classified into low (<10 µg L^?1), moderate (≥10 to <25 µg L^?1), high (≥25 to <50 µg L^?1), and very high (>50 µg L^?1). In zone I, the concentration of As in groundwater varied from 3.5 to 42 µg L^?1 with a mean value of 23.4 µg L^?1. On the basis of these limits, only 8% of samples were low, whereas 51 and 41% of the total samples collected from this region fall in the moderate and high As categories. The concentration of As in groundwater of zone II varied from 9.8 to 42.5 µg L^?1 with a mean value of 24.1 µg L^?1. Arsenic concentration in the alluvial aquifers of the central plain of zone II is 2 and 52% in the low and moderate limits. In this region, 46% of groundwater sites contain high As concentrations. Arsenic concentrations in the aridic southwestern parts are significantly different from other two provinces. The As concentration ranged from 11.4 to 688 µg L^?1 with average value of 76.8 µg L^?1. Eleven percent of the aquifers of the southwestern region of zone III are in the moderate category, 54% in the high, and 35% in the very high. According to safe As limits (<10 µg L^?1), only 3 and 1% of the groundwater samples collected from zones I and II were fit for dinking purposes with respect to As content. In the aridic southwest, zone III, all water samples contained As concentrations greater than the safe limits and thus are not suitable for drinking purposes. The presence of elevated As concentrations in groundwater are generally due to the results of natural occurrences of As in the aquifer materials. The concentration of other competitive oxyanions in waters such as phosphate, sulfate, and borate also depressed the adsorption of As on the sorption sites of aquifer materials and thereby eventually elevate the As concentration in groundwaters. In groundwater of alluvial aquifers of Punjab, released from sulfide oxidation and oxyhydroxide of iron, elevated (>10 µg L^?1) concentrations of As were widespread because of high pH (>8.0) and higher concentrations of phosphate, borate, sulfate, and hydroxyl anions. It is conclusively evident that geochemical conditions, such as pH, oxidation–reduction, associated or competing ions, and evaporative environments have significant effects on As concentration in groundwater. These conditions influence how much As is dissolved or precipitated into the water and how much is bound to the aquifer materials or the solid particles in water.     

Reduction of Hexavalent Chromium in Soil and Ground Water Using Zero-Valent Iron Under Batch and Semi-Batch Conditions

Chemical remediation of soil and groundwater containing hexavalent chromium (Cr(VI)) was carried out under batch and semi-batch conditions using different iron species: (Fe(II) (sulphate solution); Fe⁰ _G (granulated elemental iron); ZVIne (non-stabilized zerovalent iron) and ZVIcol (colloidal zerovalent iron). ZVIcol was synthesized using different experimental conditions with carboxymethyl cellulose (CMC) and ultra-sound. Chemical analysis revealed that the contaminated soil (frank clay sandy texture) presented an average Cr(VI) concentration of 456?±?35 mg kg^?1. Remediation studies carried out under batch conditions indicated that 1.00 g of ZVIcol leads to a chemical reduction of ～280 mg of Cr(VI). Considering the fractions of Cr(VI) present in soil (labile, exchangeable and insoluble), it was noted that after treatment with ZVIcol (semi-batch conditions and pH 5) only 2.5% of these species were not reduced. A comparative study using iron species was carried out in order to evaluate the reduction potentialities exhibited by ZVIcol. Results obtained under batch and semi-batch conditions indicate that application of ZVIcol for the “in situ” remediation of soil and groundwater containing Cr(VI) constitutes a promising technology.     

Batch Chromium(VI), Cadmium(II) and Lead(II) Removal from Aqueous Solutions by Horticultural Peat

The selectivity and uptake capacity of horticultural peat available in Romania was evaluated with respect to the removal of Cd(II), Cr(VI) and Pb(II) ions from aqueous solution. The kinetics, sorption capacities, selectivity and pH dependence of sorption were determined. The influence of metal concentration in solution is discussed in the terms of Langmuir and Freundlich isotherm and constants. Sorption capacities increased with increasing metal concentration in solution. For solutions containing 300 mg/l of metal, the observed uptake capacities were 20 mg Cd(II)/g peat, 15 mg Cr(VI)/g peat and 30 mg Pb(II)/g peat. The study proved that horticultural peat is a suitable material for the removal of the studied heavy metal ions from aqueous solutions, achieving removal efficiencies higher than 90%, and could be considered as a potential material for treating effluent polluted with Cd(II), Cr(VI) and Pb(II) ions.     

Evaluation of Green Waste and Popular Twigs Biochar Produced at Low and High Pyrolytic Temperature for Efficient Removal of Metals from Water

Biomass-derived biochar is considered as a promising heavy metal adsorbent, due to its favorable physicochemical properties, from aqueous solution as compared with other adsorbents. However, there is a limited number of studies on the effects of biochar produced from different feedstocks and pyrolytic temperatures on metal removal from metal-contaminated water. So in this study, the removal of the most prevalent heavy metals [(lead (Pb(II)), cadmium (Cd), and chromium (Cr)] by green waste biochar (GWB) and popular twigs biochar (PTB), produced at different pyrolytic temperatures, i.e., low 350 and high 650 °C, has been investigated, following the determination of physical and chemical properties of biochar. The efficiency of heavy metals removal of biochar was studied at different concentrations of heavy metals (10 and 100 μg mL^?1), biochar types and treatment duration (3, 6, 9, and 12 h) at isothermic condition of aqueous solution. Results revealed that both feedstock type and pyrolytic temperature to produce biochar significantly affected its metal sorption capacity. The maximum sorption capacities of all three metals, i.e., Pb (II), Cd, and Cr were determined in the GWB produced at low pyrolytic temperature 350 °C after 9 h of treatment duration at both high and low metal concentrations. This highest sorption capacity of all metals by low pyrolytic temperature produced GWB was due to its better physicochemical properties especially high surface area, cation exchange capacity, and oxygen-containing functional groups as compared with woody feedstock based high pyrolytic temperature produced PTB. Conclusively, low pyrolytic temperature produced GWB was evaluated as a potential adsorbent to efficiently reduced heavy metal concentration in metal-contaminated water.     

Chromate Generation by Chromate Depleted Subsurface Materials

Soluble chromate concentrations as high as 200 μg Cr L^-1 have been reported in water samples from monitoringwells tapping alluvial deposits allegedly contaminated bylaboratory waste as well as control wells off site andupgradient (shallow aquifer) near Davis California, U.S.A. In this report we present evidence that these Cr(VI) levelscould have been generated by geogenic processes rather thanby anthropogenic inputs. We tested the hypothesis thatnative Cr(III) has been and can be oxidized to chromate bynative manganese oxides. Twenty-three drill core samples(all unsaturated) were retrieved from depths varying from1.5 to 22.5 m in 6 different wells. Visible nodules ofMnO₂ were dispersed throughout many of the samples andcarbonates were also present. Sample pH values averagedabout 8.0 and organic C was mostly less than 1.0 g kg^-1. Total Mn and Cr averaged 835 and 191 mg kg^-1respectively. All samples had the capability to oxidizeadded Cr(III) to Cr(VI). To determine the inherent capabilityof the samples to produce Cr(VI) from native Cr(III), subsamples were extracted with 5 mM CaSO₄ plus 5 mM MgSO₄ until Cr(VI) was no longer detected. After freeze-drying, deionized-distilled water was added to theleached samples to approximately field capacity (0.03 MPa). Freeze drying did not generate Cr(VI). These samples wereincubated in polyethylene film bags at room temperature inthe dark. After 1 week incubation, water in the samples wasextracted by centrifugation and the extracts were analyzedfor Cr(VI). All of the samples generated Cr(VI), and theconcentrations in the extracts ranged from 20 to 100 μg Cr L^-1. Total chromium, endemic chromium VI and chromium VI generated in leached samples were not statistically different between samples from onsite and control samples taken offsite and upgradient in respect to the shallowest aquifer.     

Chromium-Resistant Bacterial Populations from a Site Heavily Contaminated with Hexavalent Chromium

Chromium-containing industrial effluents are primarily responsible for environmental contamination by toxic and highly mobile, hexavalent chromium. The dilution plate-count method, using media amended with Cr(VI) at concentrations ranging from 0 to 1000 mg L^-1, was used to compare the sizes of Cr(VI)-resistant bacterial populations from a soil contaminated with 25 100 mg kg^-1 total Cr [12 400 mg kg^-1 Cr(VI)] to those isolated from a slightly contaminated soil (99.6 mg kg^-1 total Cr) and two other soils without any history of Cr contamination. Bacterial populations resistant to 500 mg L^-1 Cr(VI) were isolated from all soils except the heavily contaminated soil. To determine whether Cr-resistant bacterial populations were indigenous to both the contaminated and the uncontaminated soils, enrichment cultures containing Cr(VI) at concentrations ranging from 0 to 1000 mg L^-1 were employed. Bacterial populations, as high as 10⁵ (colony forming units) CFU g^-1 soil, tolerant of 500 mg L^-1 Cr(VI) were isolated from all soils within 48 h of enrichment suggesting that the presence of aerobic Cr(VI)-resistant bacterial populations is unrelated to contamination levels or contamination history. However, identification of these resistant bacteria using fatty acid profiles was unsuccessful suggesting that these populations may have unique characteristics. Fungal colonies resistant to 1000 mg L^-1 Cr(VI) were routinely isolated from both uncontaminated and contaminated soils. The results suggest that Cr-resistant microorganisms may be present in soils, even those with no history of Cr contamination.     

Assessment of the stability of chromium in remedied soils by Pannonibacter phragmitetus BB and its risk to groundwater

Purpose

Acid rain can accelerate the acidification of the chromium-contaminated soils, resulting in chromium releasing into soil solution and causing ecological risk. The current study aims to investigate the release of chromium in the remedied soils by Pannonibacter phragmitetus BB under the simulated acid rain leaching and to assess its risk to groundwater.

Materials and methods

P. phragmitetus BB was utilized to remedy the Cr(VI)-contaminated soils at two levels (80 and 1,276 mg kg^?1) by the column leaching experiment, and the chemical remediation with ferrous sulfate was used as a control. The remedied soils by P. phragmitetus BB and ferrous sulfate were leached under the simulated acid rain to evaluate the release of chromium. Furthermore, the risk of chromium release from the remedied soils to the groundwater was assessed by a fuzzy comprehensive evaluation method.

Results and discussion

The average concentrations of water-soluble Cr(VI) in the remedied soils by P. phragmitetus BB were reduced to less than 5.0 mg kg^?1. Under leaching situation with the simulated acid rain, the release of total chromium and Cr(VI) from the remedied soils by P. phragmitetus BB and ferrous sulfate declined rapidly with the extended leaching time. However, the release amounts of total chromium and Cr(VI) from the remedied soil by P. phragmitetus BB more efficiently deceased as compared with that by ferrous sulfate remediation. Carbonate-bounded, exchangeable, and organics-bonded chromium were the major chromium-releasing sources under the simulated rain leaching. After microbial remediation with P. phragmitetus BB and chemical remediation with ferrous sulfate, the risk grades of the remedied soils to groundwater declined from classes 11 to 5 and 6, respectively.

Conclusions

The risks of the remedied soils by both microbial remediation with P. phragmitetus BB and chemical remediation with ferrous sulfate to groundwater effectively decreased and microbial remediation more significantly declined the chromium risk to groundwater than chemical remediation.