New fluorescent dye chemosensor for mercury ion (Hg2+) detection

The dye chemosensor for mercury ion detection was designed, which was based on donor-acceptor intramolecular charge transfer system and the corresponding fluorescence changing property was successfully monitored. This new dye chemosensor was containing dimethylcarbamodithioate groups to coordinate Hg²⁺, which showed very effective sensing functions. But it showed no significant changes upon the addition of other metal ions such as Ca²⁺, Pb²⁺, Al³⁺, Ce²⁺, Ba²⁺, Ni²⁺, Cd²⁺, Zn²⁺, and Mg²⁺.     

Dithiosquarylium-based colorimetric sensors for Hg<Superscript>2+</Superscript>

A new Hg²⁺-selective chemosensor based on dithiosquarylium (DTSQ) dye was investigated. Among various metal cations tested, exclusively Hg²⁺ ion responses to irreversible color change of DTSQ-1, along with the Hg²⁺-triggered desulfurization of dithiosquarylium into its oxygen analogue squarylium (SQ) dye.     

Synthesis and VOC ethylamine sensing properties of new colorimetric chemosensor based on thiobarbituric-isophorone chromophore

A new chemosensor based on thiobarbituric-isophorone chromophore (BIC) was synthesized and its volatile organic compounds (VOCs) EtNH₂ sensing properties were investigated by UV-vis absorption spectroscopy. Upon the addition of EtNH₂, the solution of BIC showed clear color change. Sensing mechanism of the BIC to EtNH₂ were confirmed by ¹NMR studies, together with theoretical calculations based on DFT and PPP-MO methods. We have investigated ability of complex formation based on the association constant, K _ass . The BIC test strip was exposed to EtNH₂ gas. Reversible response and recovery were achieved using alternating EtNH₂ gas exposure.     

Benzothiazole-based semisquaraine as colorimetric chemosensor for Hg2+

A highly selective colorimetric chemosensor for Hg²⁺ based on the semisquaraine (BSQ) containing benzothiazole moiety was investigated. BSQ showed color change only with Hg²⁺, but it showed no significant changes upon addition of other metal ions such as Ca²⁺, Pb²⁺, Al³⁺, Ce²⁺, Ba²⁺, Ni²⁺, Cd²⁺, Zn²⁺, and Mg²⁺. Hg²⁺ ions coordinated to the BSQ forming 1:1 complex. The experimental data and conclusions are rationalized by DMol³ calculation results.     

Dyeing, fastness, and deodorizing properties of cotton, silk, and wool fabrics dyed with gardenia, coffee sludge, Cassia tora. L., and pomegranate extracts

Four kinds of natural dying solutions (natural colorant extracts) were obtained by extraction from gardenia, coffee sludge, Cassia tora. L., and pomegranate using water at 90°C for 90 min with a liquor ratio (solid natural colorant material/solvent water, weight ratio) of 1/10. The dyeing, colour fastness, and deodorizing properties of cotton, silk, and wool fabrics dyed with natural colorant extracts were compared. It was found that these properties were significantly dependent on the concentration of extracts, the structure of colorant, and the kind of fabrics. The order of colour strength (K/S) is Cassia tora. L., pomegranate, coffee sludge, and gardenia. Colour fastness (light, water, and perspiration fastness) was in the range of 2nd–5th grades. The deodorizing performance of fabrics dyed with various natural colorant extracts was in the range of 50–99 %. The deodorizing performance increased in the order of gardenia < Cassia tora. L. < coffee sludge < pomegranate. Especially, the deodorizing performance of all fabrics dyed with pomegranate was found to be highest at 99 %.     

Optimization and extraction of extra and intracellular color from <Emphasis Type="Italic">Penicillium minioluteum</Emphasis> for application on protein fibers

Precedence of microbial colorants can be seen in almost all the industrial sectors viz. food, textile, paper, agriculture, pharmaceutical, and cosmetics. These colorants are gaining popularity due to their salient advantages over synthetic and natural dyes. This study deals with the optimization and extraction of such colorants from Penicillium minioluteum for the purpose of dyeing different protein fibers. Penicillium minioluteum was cultured under different growth conditions to optimize the extracellular color production. The extracellular colorant grown under optimized fermentation conditions (medium-sabouraud; pH-5.6; temperature-15 °C; time-20 days; incubation-static) in 3000 ml haffkine flask showed maximum color or highest optical density of 1.014 at λ _max=490 nm. Later on, this colorant was extracted using nbutanol. The remaining mycelial mat obtained after filtration was extracted using different chemical and mechanical procedures to get the intracellular colorant. Highest O.D of 0.897 was recorded at λ _max=490 nm when desiccated powdered mycelial mat was extracted with methanol. Dyed silk and leather with the extracellular colorant showed color strength (K/S) as 3.88 and 3.81, respectively, whereas silk and leather dyed with the intracellular colorant showed K/S as 0.56 and 0.55, respectively. The color strength of extracellular dyed samples was found to be three times higher as compared to the samples dyed with the intracellular aqueous colorant of the same optical density. After dyeing, two different shades were obtained viz. deep red with the extracellular colorant and beige with the intracellular colorant on mulberry silk and wet blue goat nappa skin leather. Fastness towards rubbing was found to be good for both the samples. Wash fastness was excellent on silk. Fastness towards light was poor for both silk and leather. Furthermore, the color yield of the extracellular colorant (0.62 %) was found to be approximately five times more than the color yield of the intracellular colorant (0.14 %).     

Betaxanthin-Rich Extract from Cactus Pear Fruits as Yellow Water-Soluble Colorant with Potential Application in Foods

Cactus pear (Opuntia ficus-indica) fruit juice is a source of betaxanthin pigments which can be used as a natural yellow food colorant. The HPLC chromatographic pigment pattern corresponding to the betaxanthin-rich extract revealed the presence of four betaxanthins, of which indicaxanthin (proline-betaxanthin) accounts for around 85%. A betaxanthin-rich water-soluble food colorant from cactus pears fruits was produced by spray-drying microencapsulation using maltodextrin as a wall material. The resulting powder was characterized by scanning electron microscopy, and its apparent color was analyzed by spectrometry. The stability of the microcapsules was examined at +20, +4 and??20 °C in the dark during six months of storage. The degradation of betaxanthins was delayed by microencapsulation and their colorant stability increased at lower temperatures. The potential application of the colorant microcapsules was successfully assessed in two food model systems: a yogurt and a soft-drink. Both foods presented an attractive pale yellow color. Pigment retention and color parameters were investigated during storage under controlled conditions. Slight changes in the pigment retention, in both model systems, pointed to excellent preservation in the dark, even after 28 days at 4 °C. However, the presence of light contributed to betaxanthin deterioration. Spray-drying microencapsulation succeeds in reducing volumen of the pigment extract and can be easy in storage and delivery of the powders. It is proved to be a suitable process that can be recommended for stabilizing betaxanthins from cactus pears to be used as water-soluble natural colorants in foods.     

Application of silver nanoparticles as an antibacterial mordant in wool natural dyeing: Synthesis,antibacterial activity,and color characteristics

Madder is a natural colorant which is commonly applied with metal salts as a mordant to improve its affinity to fibers and color fastness. Madder produces an insoluble complex or lake in the presence of metal ions on mordanted fabric. In this study, wool fabric was pretreated with AgNPs (silver nanoparticles) as a mordant, then dyed with madder. The wool fabric samples were examined by scanning electron microscopy (SEM) and their colorimetric characteristics were evaluated. The formation of spherical silver nanoparticle was confirmed using UV-Visible spectroscopy, SEM images, and elemental analysis. The average size of synthesized silver nanoparticles on the surface of wool fibers is around 73 nm. The dyed wool samples were pretreated with different concentration of Ag⁺ ions or AgNPs, which showed higher color strength value compared to untreated dyed wool fabric. This pretreatment also presented good antibacterial activity.     

Isophorone and pyrrole based push-pull system dye: Design,preparation and spectral switching on pH/fluoride ion

A novel, potential dye chemosensor based on pyrrole as a donor unit and isophorone as an acceptor unit have caused sizeable optical changes when used as a reversible, pH-induced, molecular switching in the presence of alkali/acid stimulus. The dye also exhibited marked UV-visible absorption changes and highly fluorescence quenching in the presence of fluoride anions, which are based on intramolecular charge transfer (ICT) system. The level of energy potential and the electron flowing stream of this dye chemosensor such as HOMO and LUMO values were calculated by computational calculation approaches.     

Environmental conditions influence the content and yield of anthocyanins and total phenolics in purple- and red-flesh potatoes during tuber development

Changes in content and yield of anthocyanins (ACY) and total phenolics (PHEN) during development of purple- and red-flesh potato (Solanum tuberosum L.) were studied in cultivars grown in Texas and Colorado. In both locations, the ACY and PHEN content (mg/100 g tissue) decreased with tuber growth and maturity, while tuber weight (kg), total yield (Ton ha^-1) and compound yields (kg ha^-1) increased. Longer days and cooler temperatures in Colorado favored about a 2.5- and 1.4-times higher ACY and PHEN content, respectively, than in Texas-grown tubers. Harvesting potatoes at later maturity stages maximized compound yields while minimizing the glycoalkaloid content. This information can be useful to potato breeders and producers in selecting appropriate growing conditions for the enhancement of natural colorant and antioxidant yields in purple- and red-flesh potatoes for the nutraceutical and food industry.     

Statistical optimization of wool dyeing with Alizarin Red S as a natural dye via central composite design

Recently a revival interest in the use of natural dyes in textile coloration has been growing. The major parts of natural dyes are anthraquinones. Depending on substituents, anthraquinone compounds are dyes, as represented by Alizarin Red S (ARS) which is a major constituent of the natural colorant madder. In this study, colorization of wool fiber by ARS as a natural dye was studied. The progress of the colorization process was followed spectrophotometrically at 500 nm as λ _max. The effective factors on the process were investigated using one factor at a time (OFT) method. Then, the central composite design (CCD) method was applied to design experiments for the evaluation of the interactive effects of the four most important operating variables. The values of the optimized factors for OFT and CCD methods in wool dyeing with ARS were respectively as follow: temperature 70 °C and 55 °C, L/R: 40/1 and 40/2, pH 5.0 and 2.5 and time 60.0 min and 42.0 min. The predicted results by CCD had significantly higher exhaustion percentages and relatively better fastness properties than OFT and were found to be in a good agreement (R²=0.9908) with those obtained by performing experiments. Finally, the obtained results were shown a good wash fastness for dyed wool with ARS.     

Synthesis and cyanide anion recognition of a new displacement fluorescence chemosensor based on two-branched aurone

A new fluorescence turn-on chemosensor based on two dipyridylamine groups substituted aurone moiety, 4’-2,2’-dipyridylamine-3-2,2’-dipyridylamine aurone (1), was synthesized. The recognition properties of the compound for cyanide anions and copper ions were investigated. Yellow fluorescence of the compound is almost quenched completely because of the complexation between the compound and copper ions. After the subsequent addition of cyanide anions, fluorescence spectrum is recovered to the original status of the compound owing to the strong bonding ability between cyanide anions and copper ions and the removal of copper ions from the complexes. The recognition also can be observed by naked eye. The compound exhibits a good reversibility and can be used repeatedly to recognize cyanide anions for several times.     

pH triggered switching dye sensor based on furan and pyrone units

pH triggered dye sensor based on pyrone unit as a donor group and furan unit as an acceptor grouphave resulted in very promising optical switches, when dye was applied by alkali-induced nucleophilic additionreaction. The dye displayedclear UV-Visible absorption changes and new fluorescence emission behaviors, which are based on intramolecular charge transfer (ICT) system of the dye molecular structure. The levels of energy potential and the electron density distributions of this dye chemosensor were also simulated and discussed using computational modelcalculation.     

Antibacterial properties and color fastness of silk fabric dyed with turmeric extract

The use of non-toxic and eco-friendly natural dyes on textiles has received much attention due to the increased environmental awareness in order to avoid some hazardous synthetic dyes. In the present study, an eco-friendly approach was developed to impart color and antibacterial properties to silk fabrics dyed with turmeric extract as a non-toxic natural colorant. The natural colorant was extracted from Curcuma Longa rhizome. Copper sulfate, ferrous sulfate and potassium aluminium sulfate were applied in a pre-metallization process as mordanting agents. Antibacterial properties of treated fabrics were evaluated against common pathogenic bacteria, Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). The effects of dye concentration and mordant types on the obtained color hues, antibacterial efficiency and color fastness of the fabrics were investigated. The results indicated that mordanted and dyed fabrics possessed desirable antibacterial properties. Complete antibacterial activity of the treated fabrics was obtained with 3 %owf (on weight of the fabric) copper sulfate. It was also shown that increasing the dye concentration could lead to a more efficient antibacterial activity on the mordanted dyed fabrics. An optimum level of the antibacterial activity was observed in the sample treated with 30 %owf of turmeric. Furthermore, the results of CIE L*, a*, b* values, FTIR, washing, light and rubbing fastnesses of the dyed fabrics were reported. The mordanted dyed silk fabrics exhibited desirable color fastness properties. These studies proved a direct relationship between the degree of antibacterial activity of the fabrics treated with turmeric and the metals ion concentration.     

Benzothiazole and indole based dye sensor: Optical switching functions with pH stimuli

A new designed dye sensor based on indole as a donor unit and benzothiazole as an acceptor unit have provided very clear optical switching functions when monitored with a pH triggered molecular chemosensor effects in the presence of alkali/acid addition. The prepared dye sensor shows cleared fluorescence quenching effect with alkali addition. The level of energy potential and the electron distribution of this compound were calculated by computational simulation approaches.     

Natural dyeing of cotton with <Emphasis Type="Italic">Xylocarpus granatum</Emphasis> bark extract: Dyeing,fastness, and ultraviolet protection properties

In this research we investigated the dyeing of cotton fabrics with extracts of Xylocarpus granatum, a mangrove plant with a long history of use in leather tanning and textile dyeing. X. granatum bark was extracted and spray-dried, yielding a tannin-rich, reddish-brown powder. This powder proved a suitable colorant for the natural dyeing of cotton with promising color fastness properties to wet treatments (washing, water, sea water, and perspiration), hot pressing, crocking, and light exposure. However, the dye alone produced only weak levels of coloration and therefore metallic salt mordants were employed to improve the color strength, through the formation of insoluble tannate complexes. The resulting fabric K/S values were dependent on the mordant used and exhibited the following trend: ferric sulfate > sodium dichromate > copper sulfate > potassium aluminum sulfate > no mordant, for fabrics exposed to mordants before and after dyeing. Mordanting resulted in slight variations in shade and color fastness. In most cases, the color fastness properties were preserved, except for color fastness to light and hot pressing, for which lowered ratings were found for some mordants. Stiffness and mechanical performance were not greatly affected by dyeing or mordanting, except for sodium dichromate mordanting which significantly stiffened and weakened the fabric. The ultraviolet protection factor (UPF) of all the dyed samples achieved the maximum (50+) level, highlighting the excellent UV shielding properties of the fabric. Overall, X. granatum bark extract is a promising, effective colorant for the natural dyeing of cotton in terms of appearance, fastness, and physical characteristics.     

Effect of pigment particle character on dyeing performance of cotton fabrics

The cotton fabrics were dyed by exhaust method using the pigment dispersions as colorant, and meanwhile the effects of particle character on dyeing performance were further investigated. The results showed that the larger zeta potentials, the higher K/S value, pigment uptakes, rubbing and washing fastness of the dyed cotton fabrics were. Adsorption isotherms were belonging to Langmuir type when zeta potentials were about 0.46 mV and 31.39 mV respectively. The cotton fabrics that dyed by the pigment dispersions with small particles had high K/S value, rubbing and washing fastness. The chemical structure of pigment had little influence on pigment uptakes, and all kind of pigment dispersions reach to 98 % uptakes after 30 min but exhibit various uptake rates at initial stage.     

Cross-cultural study of color sensation and sensibility for Korean traditional fabrics with natural indigo dyeing

This study focused on fabric planning for environment-friendly fashion products for the international market. In order to achieve this objective, some Korean traditional fabrics (Mosee and Myungjoo) with natural indigo dye were selected and they were evaluated in terms of subjective color sensation and sensibility by two cultural groups (Korean and American college students). Also, color preference for the natural dye fabrics by each cultural group was predicted by colorimetric properties, color sensation, and color sensibility factors. Most bluish fabrics dyed with natural indigo colorants were likely to provide a cold and strong sensation. There were partially significant differences in terms of color sensation among six fabrics. The color sensibility for the naturally dyed fabrics was classified into three factors: ‘Classic’, Romantic’, and ‘Unique’. The color sensibility factor ‘Classic’ was the dominant factor for the naturally dyed fabrics with indigo colorant. There were cultural differences in terms of color sensation and color sensibility factors between Korean and American university students. Color preference of dyed fabrics with natural indigo was found to be influenced mainly by the color sensibility factors among colorimetric properties, color sensation, and color sensibility.     

Studies on Hashish IV. Colour reactions of cannabinols

A comprehensive study on the colour reaction of Hashish applying the known reagents using some other aldehydes was carried out. Cinnamaldehyde reagent proved to be an excellent spray reagent for Hashish especially the diols.

---

Zusammenfassung Die Farbreaktionen der Haschisch-Komponenten wurden mit verschiedenen Reagenzien untersucht. Cinnamaldehyd stellte sich als ein sehr günstiges Haschish-Reagens insbesondere für Diole heraus.

---

Résumé L'étude du reactif colorant sur le constitution d'Hashish a été effectué. Cinnamaldehy de a été le meilleur reactif pour Hashish surtout pour diols.

     

Effective natural dye extraction from different plant materials using ultrasound

Dyes derived from natural sources have emerged as an important alternative to synthetic dyes. Therefore, there is a need for developing better solid-liquid extraction techniques for leaching natural colorants from plant materials for applications in plant research, food as well as dyeing industries. The influence of ultrasound on natural colorant extraction from different potential dye yielding plant materials has been studied in comparison with magnetic stirring process as control. The color yielding plant materials used in the present study include Green wattle bark, Marigold flowers, Pomegranate rinds, 4’o clock plant flowers and Cocks Comb flowers. Analytical studies such as UV-VIS spectrophotometry and gravimetric analysis were performed on the extract. The results indicate there is a significant 13-100% improvement in the extraction efficiency of the colorant obtained from different plant materials due to the use of ultrasound. Therefore, this methodology could be employed for extracting coloring materials from plant materials in a faster and effective manner.