Predicting the growth and yield of <Emphasis Type="Italic">Pinus radiata</Emphasis> in Bolivia

Context   

Pinus radiata D. Don is the most widely planted conifer in the Inter-Andean Valleys of Bolivia. However, Bolivia lacks knowledge on stand dynamics and yield prediction of radiata pine, and the particular Bolivian conditions prevent a straightforward application of equations developed elsewhere.     

Stock size affects outplanting survival and early growth of fascicle cuttings of <Emphasis Type="Italic">Pinus radiata</Emphasis>

Four outplanting experiments in the North Island of New Zealand were examined to determine the effects of stock size on survival and early height growth of rooted fascicle cuttings of Pinus radiata D. Don. Survival and third-year tree height were examined in relation to (a) initial diameter, (b) initial height, (c) initial diameter squared, (d) bulk index (diameter squared × height), and (e) sturdiness index (height/diameter). Of the five attributes examined, initial diameter was correlated with survival on two sites, while height and sturdiness index were not correlated with survival. Cutting morphology was more consistently correlated with growth than with survival. On all sites, growth of cuttings after outplanting was positively related to size (e.g., diameter, height, bulk-index). Results from these trials suggest good performance of rooted fascicle cuttings can be expected when stem diameters (at the soil surface) range from 8 to 10 mm and heights range from 25 to 40 cm.     

Modelling stemflow production by juvenile lodgepole pine (<Emphasis Type="Italic">Pinus contorta</Emphasis> var. <Emphasis Type="Italic">latifolia</Emphasis>) trees

Stemflow is a focused point source input of precipitation and nutrients at the base of a tree or plant and can have a significant impact on site hydrology. To date, no known studies have modelled stemflow production for juvenile lodgepole pine (Pinus contorta var. latifolia). Meteorological conditions, tree characteristics, and stemflow were sampled for two juvenile lodgepole pine stands over the course of the 2009 growing season. Step-wise multiple regression was used to assess which meteorological and tree architecture variables influenced stemflow production for each research plot. Once predictor variables were identified, models were produced for each stand and a generic model was produced that applied to both plots. A model employing precipitation depth and crown projection area successfully explained 71.3% of the variation in stemflow production from sampled trees. Stemflow was found to represent 1.8% of the study period rainfall and, although not a large component of the plot-scale canopy water balance, it is an order of magnitude greater than the fractioning of stemflow from mature lodgepole and lodgepole pine dominated forest. Additionally, stemflow funnelling ratios were found to average 22.2 and 24.3 from the two sample plots over the study period with a single tree, single event maximum of 111.7 recorded for a tree with a 3.3 cm bole diameter and a rain depth of 17.4 mm.     

Adaptive management rules for <Emphasis Type="Italic">Pinus nigra</Emphasis> Arnold ssp<Emphasis Type="Italic">. salzmannii</Emphasis> stands under risk of fire

Key message

We generate flexible management rules for black pine stands, adaptable to alternative stand management situations and entailing thinnings, final-felling, and salvage cuts, based on the results on 270 stand level optimizations.

Context

Forest management instructions often rely on the anticipated prediction of the stand development, which poses a challenge on variable economic and environmental conditions. Instead, an alternative approach to better adapt forest management decisions to changing conditions is defining flexible rules based on thresholds that trigger management operations.

Aims

This article develops rules for the adaptive management of P. nigra stands in Catalonia (Spain) addressing the risk of fire and post-fire forest management.

Methods

The stochastic version of the simulation-optimization system RODAL was used to optimize the management of forest stands in three sites under different fire probability levels. A total of 270 optimizations were done varying site fertility, fire probability, and economic factors. The results of the optimizations were used as the basis of flexible forest management rules for adaptive stand management.

Results

The developed management rules defined the basal area limit for thinning, the thinning intensity, the mean tree diameter at which regeneration cuttings should start, and the basal area below which a salvage cutting should be done. Fire risk was not a significant predictor of the models for thinning and final cutting rules.

Conclusion

The presented rules provide a flexible tool for forest management during the stand development and under changing conditions when the management objective is to maximize economic profitability of timber production.

     

Comparison of postfire mortality in endemic Corsican black pine (<Emphasis Type="Italic">Pinus nigra</Emphasis> ssp. <Emphasis Type="Italic">laricio</Emphasis>) and its direct competitor (<Emphasis Type="Italic">Pinus pinaster</Emphasis>)

• Introduction   

Laricio pine (Pinus nigra J.F. Arn. ssp. laricio (Poiret) Maire var Corsicana Hyl.) is a form of black pine endemic to Corsica, that may now be under threat due to current fire regimes and competition with maritime pine (Pinus pinaster Aiton).     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Aboveground biomass equations for individual trees of <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> and <Emphasis Type="Italic">Larix kaempferi</Emphasis> in Japan

Generic equations are proposed for stem, branch and foliage biomass of individual trees in even-aged pure stands of Cryptomeria japonica, Chamaecyparis obtusa and Larix kaempferi. Biomass data was collected from a total of 1,016 individual trees from 247 stands throughout Japan, and five regression models were assessed by root mean square error, mean bias, fit index (FI), and AIC. The results show that a power equation using diameter at breast height (dbh) and height is the most suitable for all species and components. This equation is more accurate than the familiar power equation that uses ‘dbh² height’, and it expresses the greater volume of branch and foliage mass of trees with a lower height/diameter ratio. A power equation using dbh is more reasonable for models with dbh as the only independent variable and more accurate than a power equation using ‘dbh² height’ for estimating branch and foliage mass. Estimating error for branch and foliage mass is larger than that for stem mass, but the entire aboveground biomass can be estimated with an error of less than 19%, except in the case of small trees with dbh less than 10 cm.     

Fertiliser and irrigation effects on wood density at various heights for <Emphasis Type="Italic">Pinus radiata</Emphasis>

This study examined the combined effect of 19-years of nitrogen fertilisation and irrigation on the basic density along the stems of Pinus radiata (D.Don). The sample trees came from two treatments in the Biology of Forest Growth experiment: the control (C no treatment) and the irrigated and liquid fertilised (IL irrigated from age 10 to 29, liquid fertilised from ages 10 to 17). The mean basic density at breast height in the IL trees was significantly less (P < 0.05) than the C trees (430 and 471 kg m⁻³, respectively). However, the mean density of the entire bole was not significantly different. Basic density decreased with height, with the density near the tips of the trees being only 80% of the density at breast height for both treatments. The relative rate of the decrease was different between treatments. The density of the C trees decreased steadily with height while the IL trees held a relatively constant density for about half their total height. The results show the importance sampling at several different heights when considering the effects of various treatments on wood basic density in Pinus radiata.     

The effect of the interaction of tree slenderness and relative height with ring width on wood density in <Emphasis Type="Italic">Abies balsamea</Emphasis> and <Emphasis Type="Italic">Picea glauca</Emphasis>

Wood density affects the strength of lumber and paper products. Despite considerable research, however, the key factors influencing wood density are still not fully understood. The aim of this study was to analyze the effects of variables within and among trees on the density of current wood growth along the stem in order to further understanding and prediction of wood quality. Correlation analyses together with linear mixed effects and randomForest modelling were carried out using stem analysis and tree-level data from long-term balsam fir and white spruce stand density experiments in Eastern Canada. Wood density showed highly structured patterns of variation among trees. Mixed effects and randomForest models, which incorporated tree-level effects accounted for much of the wood density variation. The three most influential variables identified by randomForest analysis for both species were tree slenderness, relative height and ring width. Wood density increased with slenderness and relative height, and these variables affected relationships of wood density to ring width. Wood density is associated with interacting variables within and among trees including tree slenderness and relative height. Wood density is related to ring width, but this relationship is modulated by tree-level influences which likely reflect mechanical stability requirements.     

Long-term growth performance of <Emphasis Type="Italic">Cordia africana</Emphasis> and <Emphasis Type="Italic">Grevillea robusta</Emphasis> trees in the Mount Kenya region

This study examined the long-term growth performance of Cordia africana and Grevillea robusta, which are the most common indigenous and exotic trees, respectively, associated with crops in the Mount Kenya region. Local farmers prefer G. robusta to C. africana as on-farm trees because they believe that G. robusta grows faster. Measurements of height and diameter at breast height were made of 47 C. africana and 89 G. robusta trees for which the age was established based on interviews with farmers. The oldest G. robusta and C. africana trees were 55 and 46 years old, respectively. The apical growth rate for G. robusta was greater than that for C. africana in Katheri (a humid area). The differences between the two species were less remarkable in Ruiri (a dry-subhumid area). There was no notable difference in the radial growth performance of the two species in Katheri and Ruiri. These comparisons suggest that the long-term growth performance of C. africana is not necessarily inferior to that of G. robusta.     

Micropropagation of <Emphasis Type="Italic">Salvadora</Emphasis><Emphasis Type="Italic">persica</Emphasis>-a tree of arid horticulture and forestry

A micropropagation method for Jaal (Salvadora persica)—a tree of arid horticulture and forestry has been developed. Nodal segments of fresh shoot sprouts originated from axillary buds obtained from a plant around 35–40 years old lopped plant were used as explants for establishment of in vitro cultures. Surface-sterilized explants produced optimum number of shoots through activation of axillary buds on Murashige and Skoog’s (MS) medium containing 8.88 μM BA (6-benzyladenine) + additives (25 mgl⁻¹ each of adenine sulphate, arginine, citric acid, 50 mgl⁻¹ ascorbic acid). The shoot multiplication was influenced by the successive transfer of the mother explants for 4–5 passages. The maximum number (23.1 ± 0.73 shoots per explant) of shoots were regenerated on MS supplemented with 1.11 μM BA + 1.16 μM Kn (Kinetin) + 0.54 μM NAA (α-naphthalene acetic acid). About 90% shoots pulse-treated with a combination of 2460.27 μM Indole-3-butyric acid (IBA) + 494.56 μM NOA (2-naphthoxy acetic acid) were rooted ex vitro on soilrite within 15–18 days. Over 80% cloned plantlets were hardened successfully in a green house and transferred to polybag/pots.     

Fuel types and crown fire potential in <Emphasis Type="Italic">Pinus halepensis</Emphasis> forests

There is a lack of knowledge to identify and classify forest structures according to the risk of crown fires, especially in Mediterranean regions. In this study, for the first time, we use real information, obtained after a wildfire that burnt under extreme meteorological conditions, to classify forest structures of Pinus halepensis into fuel types as a function of crown fire potential. We identified fourteen forest structures which characterize many forest types in Western Mediterranean areas depending on canopy closure, number of tree layers, percent of each tree layer and overall tree density. By using the pattern of fire types that burnt the most numerous forest structures, we have identified four fire hazard groups of forest structures which are considered different fuel types. The first two had the lowest risk of active crown fires and they differed in the proportion of surface fires and passive crown fires. The third fuel type was the threshold between structures with low and high extreme fire behavior; while the fourth had a high risk of active crown fires. Firefighters and forest managers who are demanding this kind of schema, will test and upgrade this classification of fuel types in function of crown fire potential during future wildfires.     

An inoculation experiment of Japanese <Emphasis Type="Italic">Bursaphelenchus</Emphasis> nematodes on Japanese black and red pine, <Emphasis Type="Italic">Pinus thunbergii</Emphasis> and <Emphasis Type="Italic">P. densiflora</Emphasis>

The pinewood nematode (PWN) Bursaphelenchus xylophilus is an invasive pathogen that was introduced from North America to Asian countries and Portugal and is devastating native pine forests. Some native European and Asian Bursaphelenchus nematodes also have weak to moderate pathogenicity to native pine species. To evaluate the potential risk of native Bursaphelenchus species, we inoculated ten Japanese Bursaphelenchus species into native pine species (the dominant forest species) in Japan, and evaluated their pathogenicity using mortality and tracheal tissue damage as indices. Inoculation was conducted on August 3, 2007, and the symptoms were observed every 2 weeks until February 1, 2008. None of the inoculated trees, excluding the pathogenic PWN inoculated control, showed external disease symptoms; however, four species [a less pathogenic PWN isolate, B. luxuriosae, Bursaphelenchus sp. NK215 (undescribed), and NK224 (undescribed)] caused tracheal tissue damage in inoculated seedlings and showed weak pathogenicity. Therefore, we conclude that there are some potentially pathogenic native species of nematodes distributed in Japan. Interestingly, two of these weakly pathogenic species, B. luxuriosae and NK215, are not associated with Pinaceae trees, suggesting that nematode pathogenicity may be a pre-adaptive character. More experimental studies under different conditions are necessary to accurately evaluate the potential risk of these pathogens.     

Recessive inheritance of morphological characteristics of utsukushimatsu,<Emphasis Type="Italic">Pinus densiflora</Emphasis> f.<Emphasis Type="Italic">umbraculifera</Emphasis>

Pinus densiflora f.umbraculifera, commonly known as utsukushimatsu, is a distinctively shaped form of Japanese red pine whose growth is restricted to a forest stand in Shiga Prefecture, Japan. The inheritance mode of morphological characteristics of utsukushimatsu was studied to preserve the genetic resource of this pine. As previously reported, F₁ trees grown from open-pollinated seeds harvested from trees inhabiting the native stand showed two phenotypes: one resembling utsukushimatsu, which produces multiple trunks, and the other resembling normalP. densiflora, which produces one or a few trunks. In the present study, controlled pollination was carried out using F₁ and normalP. densiflora trees. Segregation ratios of the two phenotypes observed in the F₂ population showed that the morphological characteristics of utsukushimatsu are inherited recessively. This suggests that the mutation of one gene or a few closely linked genes controls the morphological characteristics of utsukushimatsu. Since multiple trunk formation of utsukushimatsu might be related to a loss of lateral bud inhibition, it follows that a simple gene mutation breaks apical dominance inP. densiflora.     

Stiffness and wood variation of 3-year old<Emphasis Type="Italic"> Pinus radiata</Emphasis> clones

The objective of this study was to explore wood variation, especially modulus of elasticity ( moe), density, and microfibril angle ( mfa), in a three-year old Pinus radiata tree clone trial. Moreover, the study examined the potential for genetic selection of radiata pine clones with high moe using current acoustic technology. The clone selection criteria were based on growth traits, basic density, and sound velocity indices to mirror the range in wood density and moe amongst c. 1000 clones. The selected 22 clones, represented by two trees each, were measured for moe, spiral grain, wood density, compression wood percentage, and mfa. Good agreement was found between static moe and dynamic moe. Both static and dynamic moe measurements were found to be primarily dependent on mfa (clonal range 28–39 degrees). Although wood density (clonal range 300–400 kg/m³) did not have a significant influence on moe alone, it was significant in combination with mfa. Compression wood tended to reduce moe and inflate wood density. The opportunities for genetic selection of radiata clones with high stiffness seem promising as the 22 selected clones exhibited a two-fold range of static moe (2.2–4.7 GPa) and the clonal heritabilities ( ) for moe, density and mfa were high.     

Insecticidal properties of <Emphasis Type="Italic">Thymus persicus</Emphasis> essential oil against <Emphasis Type="Italic">Tribolium castaneum</Emphasis> and <Emphasis Type="Italic">Sitophilus oryzae</Emphasis>

Red flour beetle Tribolium castaneum (Herbst) and rice weevil Sitophilus oryzae (L.) are considered to be the major insect pests in storage. Essential oils from aromatic plants are recognized as proper alternatives to fumigants. Thymus persicus (Ronniger ex Rech. f.) is one of these plants that have medicinal properties and is indigenous to Iran. The essential oil was obtained from aerial parts of the plant and analyzed by GC and GC–MS. Carvacrol (44.69%) and thymol (11.05%) were the major constituents of the oil extracted. In this experiment, fumigant toxicity of the essential oil was studied against T. castaneum, S. oryzae at 27 ± 1°C and 60 ± 5% RH in dark condition. The adult insects were exposed to the concentrations of 51.9, 111.1, 207.4 and 370.4 μl/l air to estimate median lethal time (LT₅₀) values. The fumigant toxicity was increased in response to increased essential oil concentrations. The LT₅₀ values at the lowest and the highest concentrations tested were ranged from 28.09 to 13.47 h for T. castaneum, and 3.86 to 2.30 h for S. oryzae. It was found that S. oryzae adults were much more susceptible to the oil than T. castaneum. After 24 h of exposure, the LC₅₀ values (95% fiducial limit) for T. castaneum and S. oryzae were estimated to be 236.9 (186.27–292.81) and 3.34 (2.62–4.28) μl/l air, respectively. These results suggest that T. persicus essential oil merits further study as potential fumigant for the management of these stored-product insects.     

Fertility variation in endemic populations of Ehrami black pine (<Emphasis Type="Italic">Pinus nigra</Emphasis> Arnold. subsp. <Emphasis Type="Italic">pallasiana</Emphasis> var. <Emphasis Type="Italic">pyramidata</Emphasis>)

Fertility variation and effective number of parents were estimated in the 100 individuals from each of three plantation populations (P1, P2 and P3) of the endangered Pinus nigra. subsp. pallasiana var. pyramidata established in the Isparta–Golcuk district in southern Turkey in 1990. Potential relations between cone yield and growth characters (height, diameter at breast height, diameter at base and crown diameter) were also investigated. Large differences were found among populations and within populations for cone production and growth characters. Mean cone production was eight (ranging from 6.5 in P2 to 9.1 in P1) for the three populations. The 10 most productive individuals for cones produced 32% of the total cones in P1, 39% in P2 and 34% in P3; 21, 16 and 6 individuals, respectively did not produce any cones in the populations. According to the correlation analyses, the relation between cone yield and growth characters changed for the populations, while height, diameter at breast height and crown diameter were positively significantly correlated (r = 0.182, 0.135 and 0.209; p ≤ 0.05) with cone production for the three populations. Fertility variation was 1.81 in total of three populations, ranging from 1.72 in P3 to 3.45 in P1). Effective number of parents was 142 (55.2 of number of parents censused; 29%, P1; 49.8%, P2; 58.3%, P3).     

Allelopathic effects of <Emphasis Type="Italic">Pinus halepensis</Emphasis> and <Emphasis Type="Italic">Quercus coccifera</Emphasis> on the germination of Mediterranean crop seeds

Agroforestry is a leading alternative for food security and forest conservation. A full understanding of positive and negative, i.e. allelopathic, interactions between crops and forest trees is necessary for producing crops and conserving forests especially within the threatened Mediterranean forest ecosystems. The present study explored the allelopathic effects of green and senescent leaf and soil extracts of two agroforestry trees—Pinus halepensis and Quercus coccifera—on the germination of wheat, barley, lentil, chickpea, and fababean as the major grain crops of Jordan. Results revealed that allelopathic effects reduced seed germination of these crops. Germination reduction reached a maximum of 75% in fababean treated with green extracts of Q. coccifera and differed among crops and extract sources, but not between tree species. Comparing between green and senescent leaf and soil extract, regarding their effect on germination percentage, it was noticed that these effects were similar in some crops and were different in others. Germination responses were generally different between cereals and legumes where cereals tend to be less affected by allelopathic influences than legumes, especially fababean. We suggest using cereals such as wheat and barley in agroforestry practices in the Mediterranean region of Jordan.     

Inoculation with the ectomycorrhizal fungi <Emphasis Type="Italic">Pisolithus arhizus</Emphasis> and <Emphasis Type="Italic">Scleroderma</Emphasis> sp. improves early growth of <Emphasis Type="Italic">Shorea pinanga</Emphasis> nursery seedlings

Trees of the family Dipterocarpaceae are the dominant trees in Southeast Asian tropical forests where they play an important ecological role and are also important commercially. An experiment was conducted to determine the effect of ectomycorrhizal fungi on the growth of dipterocarp species in peat soils. Seedlings of Shorea pinanga were inoculated with spores of two ectomycorrhizal fungi, Pisolithus arhizus and Scleroderma sp. were grown in pots containing sterilized peat soil for 7 months. The percentage of ectomycorrhizal colonization on S. pinanga exceeded 86%. Colonization of S. pinanga roots by ectomycorrhizal fungi resulted in increased shoot height, stem diameter, number of leaves, and shoot fresh and dry weight. Survival rates of S. pinanga were greater for inoculated seedlings than control seedlings. These results suggest that inoculation of ectomycorrhizal fungi can improve the early growth of S. pinanga grown in tropical forests and that this technique will accelerate the rehabilitation of degraded dipterocarp forests.     

Fine root biomass and morphology of <Emphasis Type="Italic">Pinus densiflora</Emphasis> under competitive stress by <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>

The fine root (diameter ≤2.0 mm) biomass and morphology of Japanese red pines (Pinus densiflora) grown under different aboveground conditions (i.e., high and low competitive environments) were examined in a pine–cypress mixed forest. All P. densiflora subject trees were about 40 years old, and the aboveground condition (i.e., size) of red pines appeared to be influenced by the surrounding Japanese cypress (Chamaecyparis obtusa). Smaller P. densiflora exhibited lower fine root biomasses, shorter root lengths, and lower root tip densities, but longer specific root lengths and higher specific root tip densities relative to larger pines. These results suggest that P. densiflora may adjust the morphological traits of fine roots to the different conditions in biomass allocation to fine roots of individuals with different aboveground growth.