共查询到20条相似文献，搜索用时 46 毫秒
1.
Alexandra Dias Maria J. Gaspar Ana Carvalho Jani Pires José Lima-Brito Maria E. Silva José L. Louzada 《Annals of Forest Science》2018,75(2):58
Key message
In Europe, P. nigra wood presents a density pattern of longitudinal variation with an increase from east to west. However, no latitudinal tendencies were detected. Compared to other Portuguese resinous species, P. nigra revealed higher density, identical radial growth and intra-ring heterogeneity, which presents advantages for industry purposes. The environmental factors (Sites effect) manifest more strongly in the latewood components while the Trees/Sites effect is more strongly expressed in the earlywood components.Context
Although P. nigra Arnold is one of the most important conifers in Europe, little is known about the wood’s characteristics in the southwest European region.Aims
Our aims are to outline a first approach to study the growth and wood quality in P. nigra in Portugal comparing to other European natural stands and other resinous species.Methods
Inter- and intra-wood density variation of P. nigra from six Portuguese sites was studied using microdensitometry. Analysis of variance (ANOVA) was performed in three subsets: 50 common rings, core (juvenile wood) and peripheral analysis (mature wood).Results
The average ring density was 0.588 g cm?3, with maximum values in the north and low altitudes. Regarding growth traits, no latitudinal and altitudinal tendencies were detected. Compared to the main timber species in Portugal (P. pinaster Aiton), P. nigra showed similar radial growth, higher density but lower intra-ring density homogeneity. The Sites effect mainly influenced latewood density components, while the Trees/Sites effect primarily influenced earlywood components. The Rings effect was found to be relatively low, with a density decrease in the tree’s first years followed by an increase in the periphery. Growth traits showed a reduction from pith to bark.Conclusion
Considering the quality (density) and growth features of the Black pine, this species could be useful for the reforestation of mountainous Southern Europe areas that are not favourable for other species.2.
Laura Heid Christophe Calvaruso Anjy Andrianantenaina André Granier Sébastien Conil Cyrille B. K. Rathgeber Marie-Pierre Turpault Bernard Longdoz 《Annals of Forest Science》2018,75(1):31
Key message
In order to record the seasonal changes in aboveground biomass production (trunk and branches) in a forest, changes in wood density must be taken into account. A 60-year-old beech forest displayed a large intra-annual variability in its aboveground woody biomass production efficiency. This variation followed a seasonal trend with a maximum during the summer while gross primary production was rather low.Context
In the current context of land use and climate change, there is a need to precisely quantify the carbon (C) balance of forest ecosystems, and more specifically, of C allocation to tree compartments.Aims
We quantified the seasonal changes in the aboveground biomass production (aBP) of a beech forest growing on two different soils: an alocrisol and a calci-brunisol. In addition, for the alocrisol ecosystem, we assessed the existence and degree of intra-annual variability in the ratio of wood aBP to gross primary production (GPP), i.e., the wood aBP efficiency.Methods
The study site is a 60-year-old beech forest in northeastern France. An eddy covariance tower records continuously net ecosystem exchange. To investigate the temporal changes in aBP, mini-cores were drilled and diameter at breast height measurements were taken on a monthly basis from 45 trees for both stands studied over 2014.Results
A clear difference in aBP was observed between the two soils with the alocrisol being more productive than the calci-brunisol. For the alocrisol, both woody aBP and GPP changed over the course of the year, reaching peak values during June (6 and 12.5 gC m?2 day?1, respectively). Wood applied bias photon-to-current efficiency aboveground Biomass Production Efficiency (aBPE) also showed important intra-annual variations, ranging from 0.09 in September to 0.58 in July. Wood density varied throughout the year, and not taking it into account would have led to an overestimation of aBP by as much as 20% in April and May.Conclusion
Our study highlights the importance of taking wood density into account for intra-annual studies of aBP. Wood aBPE cannot be considered as constant as it fluctuated from 0.09 to 0.58 throughout the year for an annual value of 0.34. The potential error in wood aBPE stemming from not taking these changes into account amounts to 15%.3.
Mark Alexander Butler Joseph Dahlen Thomas L. Eberhardt Cristian Montes Finto Antony Richard F. Daniels 《Annals of Forest Science》2017,74(1):20
Key message
Loblolly pine ( Pinus taeda ) logs can be evaluated using acoustic velocity whereby threshold acoustic velocity values can be set to ensure lumber meets specified mechanical property design values for modulus of elasticity.Context
There is a need to better sort logs according to lumber quality for improved decision making and wood utilization because merchantable logs are being harvested from different stand types including natural forests, conventional plantations, and intensively managed plantations, all with differences in rotation ages, growth rates, and wood quality traits.Aims
This study aimed to link tree- and lumber-length log acoustic velocity with the resulting lumber properties as tested in static bending from five intensively managed loblolly pine stands in the Atlantic Coastal Plain of Georgia.Methods
Acoustic velocity was measured using the resonance-based approach on 87 tree-length logs and 244 lumber-length logs. The logs were then processed into 797 pieces of 38 mm by 89 mm (2×4), 140 mm (2×6), 184 mm (2×8), and 235 mm (2×10) dimension lumber, dried, and tested in static bending.Results
Mean MOE of the lumber had moderate relationships with acoustic velocity of the logs (R 2 = 0.49) whereas MOR and acoustic velocity did not have a strong relationship (R 2 = 0.20). Accounting for log position increased the performance of the mean lumber MOE model (R 2 = 0.62) which was further increased by adding green density and small-end diameter (R 2 = 0.67). Utilization of acoustics was effective for segregating logs based on lumber modulus of elasticity and did not depend on knowing tree or stand information such as age, site quality, and silviculture history.Conclusion
Acoustic velocity evaluation of tree- and lumber-length logs could be employed to segregate logs within the supply chain to ensure that lumber would meet specified design values.4.
Key message
Pilodyn and acoustic velocity measurements on standing trees, used for predicting density and stiffness, can be good genetic selection tools for black spruce. Genetic parameters and selection efficiency were conserved in two breeding zones with contrasted bioclimatic conditions.Context
Given the recent progress made in the black spruce genetic improvement program, the integration of juvenile wood mechanical properties as selection criteria is increasingly relevant.Aims
This study aims to estimate the genetic parameters of in situ wood density and modulus of elasticity (MoE) measurements and to verify the efficiency of various measuring methods used for large-scale selection of black spruce based on wood quality.Methods
Height, diameter, wood density, and some indirect measures of density (penetration and drilling resistance) and MoE (acoustical velocity and Pilodyn) were estimated on 2400 24-year-old trees of 120 open-pollinated families in progeny trials located in the continuous boreal or mixed forest subzones.Results
Heritability of growth, density, and indirect density measurements varied from low to moderate and was moderate for acoustical velocity in both vegetation subzones. Expected genetic gains for wood properties based on in situ methods were higher for MoE proxy estimation combining Pilodyn and acoustic velocity.Conclusion
Acoustic velocity is a good predictor of MoE. It is virtually unaffected by the environment and can be used on a large scale in the same manner as the Pilodyn for density. Using a proxy estimation that combines both methods helps optimize genetic gain for MoE.5.
? Key message
The optimal management of larch (Larix olgensis) plantations in Northeast China consisted of 2 or 3 thinnings and a rotation length of 55–61 years when economic profitability, wood production, and carbon sequestration were simultaneously maximized. Wood production ranged from 5.4 to 11.7 m3 ha?1 a?1, depending on site quality.? Context
L. olgensis is an important tree species in the northeast forest region of China, playing a significant role in the establishment of fast-growing and high-yielding plantation forests in China. However, the management of these plantations has not been optimized in previous studies.? Aims
The objective of the study was to find the optimal combinations of thinning times, thinning types, and rotation length for L. olgensis stands when both timber production and carbon stock are considered.? Methods
First, a growth and yield model was developed to simulate the dynamics of larch plantations. Then, the models were linked with the Hooke and Jeeves optimization algorithm to optimize forest management for two commonly used planting densities and three site qualities.? Results
Two thinnings were found to be suitable for larch plantations when the stand density at 10 years was 2125 trees/ha (corresponding to a planting density of 2500 trees/ha) whereas three thinnings were recommended when the density at 10 years was 2800 trees/ha (planting density of 3300 trees/ha). When the stand density was 2800 trees/ha, the optimal rotation length was 61, 58, and 55 years for site indices (SI) 12, 16, and 20 m (dominant height at 30 years), respectively. The mean annual wood production was 5.4 m3 ha?1 for SI 12, 8.2 m3 ha?1 for SI 16, and 11.7 m3 ha?1 for SI 20. The results were nearly the same for the lower initial stand density. The better the site quality of the stand, the earlier the thinnings were conducted.? Conclusion
In multifunctional forestry, optimal rotation lengths of larch plantations were 10–20 years longer than advised in the current silvicultural recommendations for Northeast China.6.
Estelle Noyer Barbara Lachenbruch Jana Dlouhá Catherine Collet Julien Ruelle François Ningre Meriem Fournier 《Annals of Forest Science》2017,74(2):46
Key message
The position of trees in the canopy impacts xylem structure and its inter-annual variation. After canopy release, the increase in the hydraulic conductivity of growth rings was driven by an increase in radial growth in large trees, and by both an increase in radial growth and changes in xylem structure in saplings.Context
Forest canopies are frequently subjected to disturbances that allow understory trees to access the upper canopy. The effect of canopy release on xylem anatomy has been assessed in juvenile trees and saplings, while the potential acclimation of larger trees remains poorly documented.Aims
We estimated the potential hydraulic conductivity of growth rings in large understory trees compared to overstory trees, and evaluated the responses to canopy release in large trees and in saplings.Methods
We recorded radial growth, wood density, and vessel structure in beech trees according to their position within the canopy and their size. Xylem traits were followed during 6 years after canopy release for large trees, and during 2 years for saplings. Vessel diameter and frequency as well as ring area were used to compute the potential annual ring hydraulic conductivity.Results
Large understory trees displayed lower radial growth increments and lower potential annual ring hydraulic conductivity than overstory trees. After canopy release, potential annual ring hydraulic conductivity increased in large trees, due exclusively to increased radial growth without any change in specific hydraulic conductivity. It increased in saplings due to both increased radial growth and increased specific conductivity.Conclusion
Tree size impacted xylem structure and resulted in plasticity of the potential hydraulic conductivity of the annual tree ring following canopy release.7.
Key message
Liming, an ameliorative method for acidified forest soils, affected the relative abundance of prey of ground-hunting spiders and consequently reduced densities of functionally similar species of these predators.Context
Liming, an ameliorative method for acidified forest soils, may modify the structure of an arthropod community by altering the soil characteristics and/or the availability of food resources.Aims
We investigated the effect of liming on the community structure of ground-hunting spiders in a birch forest.Methods
We established six experimental birch stand plots. Each stand was exposed to one of three experimental treatments: control, 1.5 t/ha, or 3 t/ha of dolomitic limestone. We collected spiders using pitfall traps during 5 years. We characterized the community in terms of activity density, species richness, community-weighted mean body size, and functional diversity and evenness in body size. We further investigated the potential links through which the liming might affect spiders, namely soil characteristics, effect of liming on birch, and densities of potential prey.Results
The commonly used dosage of 3 t/ha reduced densities of functionally similar species which led to the reduced functional evenness in body size and increased functional divergence in body size. Liming increased soil pH only slightly but decreased the densities of spiders’ preferred prey.Conclusion
The liming affected the community of ground-hunting spiders, at least partially, through reduced densities of their preferred prey.8.
Shengkan Chen Qijie Weng Fagen Li Mei Li Changpin Zhou Siming Gan 《Annals of Forest Science》2018,75(1):16
Key message
Growth and wood chemical properties are important pulpwood traits. Their narrow-sense heritability ranged from 0.03 to 0.49 in Eucalyptus urophylla × E. tereticornis hybrids, indicating low to moderate levels of genetic control. Genetic correlations were mostly favorable for simultaneous improvement on growth and wood traits. Additive and non-additive genetic effects should be considered in making a hybrid breeding strategy.Context
Eucalypt hybrids are widely planted for pulpwood production purposes. Genetic variations and correlations for growth and wood chemical traits remain to be explored in Eucalyptus interspecific hybrids.Aims
Our objectives were to clarify the heritability of growth and wood chemical traits and determine the genetic correlations between traits and between trials in E. urophylla × E. tereticornis hybrids.Methods
Two trials of 59 E. urophylla × E. tereticornis hybrids derived from an incomplete factorial mating design were investigated at age 10 for growth (height and diameter) and wood chemical properties (basic density, cellulose content, hemi-cellulose content, lignin content, and syringyl-to-guaiacyl ratio). Mixed linear models were used to estimate genetic parameters.Results
Narrow-sense heritability estimates were 0.13?0.22 in growth and 0.03?0.49 in wood traits, indicating low to moderate levels of additive genetic control. Genetic correlations were mostly positively significant for growth with basic density and cellulose content but negatively significant with hemi-cellulose and lignin contents, being favourablefavorable for pulpwood breeding purpose. Type-B correlations between sites were significant for all the traits except diameter and lignin content.Conclusion
Hybrid superiority warrants the breeding efforts. An appropriate breeding strategy should be able to capture both additive and non-additive genetic effects.9.
Key message
Cattle grazing and overstory cover restrict understory growth and interact in shaping the understory community structure in Mediterranean conifer plantations.Context
Understanding how silvicultural manipulations drive understory structure and function in Mediterranean pine plantations is essential for their multifunctional management.Aims
This paper aims to study the interactive effects of cattle grazing and overstory thinning on understory structure and function.Methods
Ten plots (0.25 ha) were selected in East Mediterranean mature Pinus brutia plantation (rainfall = 600 mm year?1) representing thinned (≈100 trees ha?1, leaf area index (LAI) ≈ 1.6) and non-thinned (≈230 trees ha?1, LAI ≈ 3.5) areas. Two subplots (100 m2) within each plot were fenced in 2000 and 2006 while a third one remained grazed. Understory growth and species composition were measured in 2010.Results
Thinning and grazing exclusion both positively influenced woody growth with their combined effect during 10 years leading to 20-fold increase in vegetation volume. An increase (15-fold) in herbaceous biomass was recorded 4 years after grazing exclusion but disappeared 10 years after exclusion due to increased woody cover. Species richness was not influenced by grazing but was positively affected by thinning. Understory composition was affected by grazing × thinning interaction with herbaceous ephemerals and short woody species being more frequent in grazed, thinned areas while larger woody species were more associated with ungrazed, non-thinned areas.Conclusion
Grazing impacts on forest understories depend on overstory cover. We propose variable grazing-thinning combinations to meet multiple management objectives.10.
Ching-Chu Tsai Li-Fen Hung Jeng-Der Chung Shiang-Jiuun Chen Ching-Te Chien Wen-Yuan Kao Ling-Long Kuo-Huang 《Annals of Forest Science》2018,75(2):52
Key message
The radial wood growth curves of Cinnamomum kanehirae Hayata (an endangered species of subtropical Taiwan) exhibit an S shape. The dominant trees displayed a larger radial growth than the codominant trees, and their growth was more sensitive to air temperature.Context
Knowledge of wood radial growth is important for evaluating the factors that limit tree growth performance. The relevant experiments have mostly been conducted in cold and temperate ecosystems, but rarely in subtropical ecosystems.Aims
In this study, we aimed to construct a unified radial growth model for Cinnamomum kanehirae Hayata and to identify its sensitivity to temperature.Methods
The wood radial increments were quantified for 3 years by either pinning or microcoring. The radial wood growth curves were modelled integratively by semiparametric regression and individually by curve fitting. The effects of tree social class, interannual and environmental factors on radial growth were analysed quantitatively.Results
A unified S-shaped growth model for C. kanehirae was successfully constructed. By including the social class effect, the model was significantly improved. The maximum radial increment (A) was significantly correlated with the maximum growth rate (μ); both A and μ were significantly higher in dominant than in codominant trees. The time-varying radial growth rate was more sensitive to air temperature in dominant than in codominant trees.Conclusion
Semiparametric models revealed an S-shaped growth curve of C. kanehirae and confirmed the higher temperature sensitivity of dominant trees compared to codominant trees in humid subtropical areas.11.
Gianluca Tondi Jinbo Hu Filippo Rizzo Janez Buh Sergej Medved Alexander Petutschnigg Marie-France Thevenon 《Annals of Forest Science》2017,74(1):19
Key message
This article presents the leaching, fire and weathering resistance improvements of samples treated with tannin-based wood preservatives added of caprolactam. PEG-added formulations show limited applicability. The FT-IR and 13 C-NMR analyses of the caprolactam-added formulations show some evidences of copolymerization.Context
Tannin-boron wood preservatives are known for their high resistance against leaching, biological attacks, fire as well as for the good mechanical properties that they impart to wood. These properties promoted these formulations for being a candidate for the protection of green buildings. However, the low elasticity of these polymers and their dark colour implied limited weathering resistances.Aims
The aim of the study is to find suitable additives for tannin-based formulations to overcome their limited weathering resistances, without compromising the other properties.Methods
Treatment, leaching and fire tests, dimensional stability as well as artificial and natural weathering of the timber treated with caprolactam-added and PEG-added formulations were performed. FT-IR and 13C-NMR of the formulations were presented.Results
The presence of caprolactam improved the properties of the formulation with particularly significant results in terms of resistance against leaching and dimensional stability. These enhancements were imparted also to the weathering resistance of the tannin-caprolactam formulations. Indeed, the colour changes during the artificial and natural exposures were stable for longer periods. FT-IR and 13C-NMR investigations of the advanced formulations were led, and covalent copolymerization of the caprolactam with the tannin-hexamine polymer was observed.Conclusion
The tannin formulations with caprolactam improved the durability of the wood specimens, while the PEG-tannin presented strong application drawbacks.12.
Key message
The carbon density was not different between natural and planted forests, while the biomass carbon density was greater in natural forests than in planted forests. The difference is due primarily to the larger carbon density in the standing trees in natural forests compared to planted forests (at an average age of 50.6 and 15.7 years, respectively).Context
Afforestation and reforestation programs might have noticeable effect on carbon stock. An integrated assessment of the forest carbon density in mountain regions is vital to evaluate the contribution of planted forests to carbon sequestration.Aims
We compared the carbon densities and carbon stocks between natural and planted forests in the Lüliang Mountains region where large-scale afforestation and reforestation programs have been implemented. The introduced peashrubs (Caragana spp.), poplars (Populus spp.), black locust (Robinia pseudoacacia), and native Chinese pine (Pinus tabulaeformis) were the four most common species in planted forests. In contrast, the deciduous oaks (Quercus spp.), Asia white birch (Betula platyphylla), wild poplar (Populus davidiana), and Chinese pine (Pinus tabulaeformis) dominated in natural forests.Methods
Based on the forest inventory data of 3768 sample plots, we estimated the values of carbon densities and carbon stocks of natural and planted forests, and analyzed the spatial patterns of carbon densities and the effects of various factors on carbon densities using semivariogram analysis and nested analysis of variance (nested ANOVA), respectively.Results
The carbon density was 123.7 and 119.7 Mg ha?1 for natural and planted forests respectively. Natural and planted forests accounted for 54.8% and 45.2% of the total carbon stock over the whole region, respectively. The biomass carbon density (the above- and belowground biomass plus dead wood and litter biomass carbon density) was greater in natural forests than in planted forests (22.5 versus 13.2 Mg ha?1). The higher (lower) spatial carbon density variability of natural (planted) forests was featured with a much smaller (larger) range value of 32.7 km (102.0 km) within which a strong (moderate) spatial autocorrelation could be observed. Stand age, stand density, annual mean temperature, and annual precipitation had statistically significant effects on the carbon density of all forests in the region.Conclusion
No significant difference was detected in the carbon densities between natural and planted forests, and planted forests have made a substantial contribution to the total carbon stock of the region due to the implementation of large-scale afforestation and reforestation programs. The spatial patterns of carbon densities were clearly different between natural and planted forests. Stand age, stand density, temperature, and precipitation were important factors influencing forest carbon density over the mountain region.13.
Key message
Carbon stock density was quite similar in planted vs natural forest of Masson’s pine ( Pinus massoniana Lamb.) in China across three ages (7, 15, and 50 years). The stock in the standing trees was larger in planted than in natural forests, but this difference was compensated by larger stocks in the soil and the debris of natural forests.Context
Most studies on the carbon stocks are focused on management strategies to maximize carbon stocks. We still lack data comparing planted vs natural conifer forests.Aims
We compared carbon storage in the different compartment (vegetation, soil, debris) along a chronosequence of Masson’s pine plantations vs natural forests.Methods
We investigated 58 Masson’s pine (Pinus massoniana Lamb.) forest stands (20 m?×?50 m plots), that differ in stand management (planted and natural forests) and age (young, middle-aged, and mature ages) and then calculated the carbon stock densities of vegetation biomass (tree, shrub, and herb), debris, and soil.Results
The carbon stock densities in the planted and natural Masson’s pine forest ecosystems ranged from 78 to 210 Mg ha?1 and from 97 to 177 Mg ha?1 respectively. The carbon stock densities in the vegetation were significantly greater in planted forests than in natural forests. A lower carbon stock density in debris and soil alleviated the increase of biomass carbon stock densities in planted vs natural forests, leading to similar carbon stock densities at ecosystem level. The carbon stock densities in the vegetation increased with age, whereas those of debris and soil remained stable.Conclusions
Planted forests of Masson’s pine sequester similiar amounts of carbon at ecosystem level to those in natural forests, reinforcing the idea that planted pine forests can contribute to the mitigation of greenhouse gas emission.14.
Caterina Palombo Patrick Fonti Bruno Lasserre Paolo Cherubini Marco Marchetti Roberto Tognetti 《Annals of Forest Science》2018,75(4):93
Key message
Comparisons between compression and opposite wood formation in prostrating Pinus mugo indicate that the secondary meristem can produce more tracheids with thicker walls by also increasing the number of contemporaneously differentiating cells, rather than only increasing the duration or the rate of cell formation.Context
Although cambium tissues within a stem experience the same climatic conditions, the resulting wood structure and properties can strongly differ. Assessing how meristem differently regulates wood formation to achieve different anatomical properties can help understanding the mechanisms of response and their plasticity.Aims
We monitored the formation of compression (CW) and opposite (OW) wood within the same stems to understand whether achieved differences in wood structure are caused by modifications in the process of cell formation.Methods
We collected weekly microcores of compression and opposite wood from the curved stem of ten treeline prostrating mountain pines (Pinus mugo Turra ssp. mugo) at the Majella massif in Central Italy.Results
Results indicate that cambium formed approximately 1.5 times more cells in CW than OW, despite that CW cell differentiation only extended 2 weeks longer and the residence time of CW cells in the wall-thickening phase was only 20% longer. Differences in their formation were thus mainly related to both the rates and the width of the enlarging and wall-thickening zones (i.e., the number of cells simultaneously under differentiation) and less to duration of cell formation.Conclusion
We conclude that to achieve such a different wood structures, the efficiency of the secondary meristem, in addition of altered rate of cell division and differentiation, can also modify the width of the developing zones. Thus, deciphering what rules this width is important to link environmental conditions with productivity.15.
Xiaolu Tang Lutz Fehrmann Fengying Guan David I. Forrester Rubén Guisasola César Pérez-Cruzado Torsten Vor Yuanchang Lu Juan Gabriel Álvarez-González Christoph Kleinn 《Annals of Forest Science》2017,74(1):12
Key message
A generalized algebraic difference approach (GADA) developed in this study improved the estimation of aboveground biomass dynamics of Cunninghamia lanceolata (Lamb.) Hook and Castanopsis sclerophylla (Lindl.) Schott forests. This could significantly improve the fieldwork efficiency for dynamic biomass estimation without repeated measurements.Context
The estimation of biomass growth dynamics and stocks is a fundamental requirement for evaluating both the capability and potential of forest carbon sequestration. However, the biomass dynamics of Cunninghamia lanceolata and Castanopsis sclerophylla using the generalized algebraic difference approach (GADA) model has not been made to date.Aims
This study aimed to quantify aboveground biomass (AGB, including stem, branch and leaf biomass) dynamics and AGB increment in C. lanceolata and C. sclerophylla forests by combining a GADA for diameter prediction with allometric biomass models.Methods
A total of 12 plots for a C. lanceolata plantation and 11 plots for a C. sclerophylla forest were selected randomly from a 100 m × 100 m systematic grid placed over the study area. GADA model was developed based on tree ring data for each stand.Results
GADA models performed well for diameter prediction and successfully predicted AGB dynamics for both stands. The mean AGB of the C. lanceolata stand ranged from 69.4 ± 7.7 Mg ha?1 in 2010 to 102.5 ± 11.4 Mg ha?1 in 2013, compared to 136.9 ± 7.0 Mg ha?1 in 2010 to 154.8 ± 8.0 Mg ha?1 in 2013 for C. sclerophylla. The stem was the main component of AGB stocks and production. Significantly higher production efficiency (stem production/leaf area index) and AGB increment was observed for C. lancolata compared to C. sclerophylla.Conclusion
Dynamic GADA models could overcome the limitations posed by within-stand competition and limited biometric data, can be applied to study AGB dynamics and AGB increment, and contribute to improving our understanding of net primary production and carbon sequestration dynamics in forest ecosystems.16.
Key message
Segregating stands and logs based on internal wood properties is likely to lead to improvements in value for forest and mill owners, but some situations were found where no segregation was the best alternative. Where segregation was the best alternative, segregating logs at the landing, or stands based on pre-harvest inventory assessments, led to the greatest value improvements.Context
The benefits of segregating stands, stems and logs based on wood properties are not clear due to the high variability of wood properties, poor market signals for wood with superior properties and poor understanding of the costs across the value chain.Aims
The aim of this study was to determine if the benefits of segregating stands and logs outweighed the additional costs.Methods
A techno-economic model (SEGMOD) was constructed that allowed comparisons of segregation at different approaches in the supply chain. The model was populated with Pinus radiata (D.Don) stand, cost and price data from companies operating in four forestry regions of New Zealand. A total of 255 segregation scenarios were modelled, which included variations in segregation approach, stand type, stand location, terrain type, market focus and market horizon.Results
Segregating logs based on internal wood properties led to improvements in stumpage and mill door value for most of the scenario sets evaluated. The No Segregation option was found (infrequently) to be best in unpruned stands. Segregating logs based on pre-harvest inventory assessments or at the landing would appear to be the best approach.Conclusion
The economic benefits of segregating stands and logs for forest and mill owners outweighed the additional costs in most of the scenarios evaluated.17.
Joanna Mucha Andrzej M. Jagodziński Bartosz Bułaj Piotr Łakomy Adrian M. Talaśka Jacek Oleksyn Marcin Zadworny 《Annals of Forest Science》2018,75(1):22
Key message
Quercus robur seedling mass was affected more by planting density than by taproot pruning. Root pruning enhanced stem biomass at the expense of roots in later growth stages. Alteration of biomass allocation due to nursery practices may result in greater susceptibility to injury and death of the seedlings under unfavorable environmental conditions.Context
Plants adjust their growth and modulate the resource allocation in response to applied treatments and environmental conditions.Aims
The aim was to examine how taproot pruning in seedlings grown at different densities affected long-term growth of Quercus robur.Methods
Seedlings, sown as acorns at two planting densities, with or without pruned roots were harvested in the second, fourth, and fifth years of growth. The effect of root pruning on biomass allocation was determined by measuring leaf, stem, and root mass fractions; carbohydrate concentrations in the roots; and C/N ratios. Specific leaf area and root length were also determined to assess morphological adaptations to growth conditions.Results
Total seedling mass was affected more by planting density than by taproot pruning. After 4 years of growth, root mass fractions were lower and stem mass fractions were greater in seedlings planted at a higher density. Five-year old root-pruned seedlings also had a lower root mass fraction and higher stem mass fractions than unpruned seedlings. Specific root length was not affected by root pruning or planting density.Conclusion
Decrease of relative root biomass with simultaneous increase of stem biomass may be a long-term consequence of taproot pruning of Q. robur, and the effects may manifest years after the seedling stage.18.
Antonio Montagnoli Mattia Terzaghi Barbara Giussani Gabriella S. Scippa Donato Chiatante 《Annals of Forest Science》2018,75(3):76
Key message
Compared to the traditional approach, applying micrometric image analysis to fine root samples of Fagus sylvatica with subsequent data treatment through principal component and cluster analysis yielded specific diameter sizes for fine root sub-classes having better resolution of the corresponding branching orders, and a more coherent relationship with the values of annual production and turnover rate.Context
Fine root traits are poorly understood, impeding an accurate representation of terrestrial biogeochemical models. Traditionally used, arbitrary diameter thresholds lead to a misestimation of fine root traits such as branching order, environmental relationship, annual production, and turnover rate.Aims
Here, we present, as modification of the traditional method, an integrated approach to segregate, at high-resolution, fine root populations of Fagus sylvatica into new diameter sub-classes that better correspond with the traits mentioned above.Methods
Samples, collected with a sequential soil coring method, were subjected to a micrometric image analysis, and resultant data were treated with principal component and cluster analysis.Results
Results showed that fine roots were distributed into diameter-size sub-classes (0–0.3 mm, 0.3–1 mm, and 1–2 mm) different from those determined by traditional methods (0–0.5 mm, 0.5–1 mm, and 1–2 mm). New sub-classes provided a better resolution of the corresponding branching-orders, and the values of annual production and turnover rate were more coherent with diameter class and soil depth. Moreover, new sub-classes provided a more precise match with soil temperature than traditional methods.Conclusion
Our method may help to unveil fine root dynamics and development, reduce data analysis time, and make the diameter-based classification more precise and trustworthy even in the case of non-intact samples.19.
? Context
Physiological ecologists have been fascinated by height- or position-linked differences of leaf morphology within tall trees >25 m, but the exact cause is still debated, i.e., is it due to light or height-induced water stress?? Aims
The aim of this study was to demonstrate that relatively small trees (<15 m) have leaf morphologies that vary with height and that such variation depends on site-moisture variability.? Methods
Leaves were collected from Robinia pseudoacacia trees at two sites in China with contrasting moisture variability to gather baseline data on leaf morphology parameters.? Results
Most measured parameters changed regularly with height. Water potential linearly decreased with height. Leaf area and stomata area decreased with height, while leaf mass per area, carbon isotope composition (δ 13C), and stomata density increased with height. Mesophyll and epidermal cell width decreased with height, while leaf thickness and palisade cell length increased with height. All the morphology parameters between two sites were also significantly different.? Conclusions
Based on the field results, it is concluded that minor variations in water potential at the time of leaf growth influence leaf morphology at both site-level and height-level. Controlled environment experiments will be conducted to confirm this conclusion.20.
Jinbo Hu Marie-France Thevenon Sabrina Palanti Gianluca Tondi 《Annals of Forest Science》2017,74(1):18