Element interconnections in Lotus japonicus: A systematic study of the effects of element additions on different natural variants

Lotus japonicus was used to study the distribution and interconnections of 15 elements in plant tissues, including essential and non-essential elements: boron (B), sodium (Na), magnesium (Mg), potassium (K), calcium (Ca), manganese (Mn), iron (Fe), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), strontium (Sr), molybdenum (Mo), cadmium (Cd) and cesium (Cs). Large amounts of B and Ca accumulated in plant leaves, while Fe, Na, Ni, As and Cd tended to mainly occur in the roots, and Mo was the only element to accumulate in the stems. The elemental compositions within plants were severely disturbed by treatment with toxic elements. Competition between element pairs in the same group (e.g. K and Cs; Ca and Sr) was not found. Iron, Cu and Zn accumulation were induced by Cd and Ni addition. When natural variants grew in a nutrition solution with subtoxic levels of As, Cd, Cs, Ni, Mo and Sr, intriguing relationships between the elements (such as Fe, As and K; Mg and Ni; Mn and Ca) were revealed using principal-component analysis. This study on the plant ionome offers detailed information of element interactions and indicates that chemically different elements might be closely linked in uptake or translocation systems.     

Cadmium‐induced alterations in nutrient composition and growth of betula pendula seedlings: The significance of fine roots as a primary target for cadmium toxicity

Birch seedlings (Betula pendula) were cultivated in nutrient solution with 0–2 μM cadmium (Cd). The effects of 2–10 days of Cd exposure on root and shoot element composition [potassium (K), calcium (Ca), magnesium (Mg), phosphorus (P), sulfur (S), iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), molybdenum (Mo), and Cd] and growth (as percentage dry weight increase) were investigated. The element composition of fine roots and remaining root parts were analysed separately to elucidate the significance of the fine roots as a primary target for Cd toxicity. The nutrient composition of the roots was considerably altered by the Cd exposures, whereas the nutrient composition of the shoot was less affected. After eight days, the whole root (fine roots + remaining roots) concentrations of K, Ca, Mg, and Mn were reduced, whereas the opposite was found for Cu and Mo. The element distribution between fine roots and remaining roots was altered by the Cd exposures. Cadmium was accumulated in the roots and in fine roots especially. Fine roots also exhibited a capacity for Cu accumulation and a retainment of Ca and S. Total plant growth was stimulated by 0.05 μM Cd but was reduced by the 0.5–2 μM Cd treatments. Root growth was increased by the Cd exposures and growth reductions were restricted only to the shoot. Accumulation of Cd and Cu and a retainment of Ca and S in the fine roots together with a preference for root growth, imply that the explanation for the Cd effects obtained may include mechanisms for Cd tolerance.     

Influence of pollution and acidification on metal concentrations in Finnish Lapland lake sediments

Fifteen Finnish Lapland lakes have been investigated to study pollution levels and possible acidification effects on nickel (Ni), copper (Cu), cobalt (Co), zinc (Zn), cadmium (Cd), lead (Pb), manganese (Mn), iron (Fe), potassium (K), sodium (Na), calcium (Ca), magnesium (Mg) and aluminium (Al) concentrations in sediments. Four lakes have average water pH lower than 6.0 and alkalinity lower than 0.050 meq/1. Contamination factor (C_f, ratio of metal concentrations in the uppermost to the deepest layers for a given lake sediment core) of Pb is high, particularly for acidic and acidifying lakes (C_f=5.2–10.4). Ni, Cu, Co, Zn and Cd concentrations increase insignificantly towards sediment surface of some lakes (with a neutral pH) with the rare exception. The influence of passible lake acidification consists of decreasing Cu, Cd, Al, Zn concentrations and organic material contents (loss on ignition) towards the sediment surface. The buffer capacity index (BCI), determined as the ratio of the sum of alkaline and alkaline-earth metals (K, Na, Ca, Mg) to Al, is lower for acidic lakes (from 0.12 to 0.36), whereas for the other lakes the BCI values are higher (from 0.42 to 1.34). Thus, BCI-values, decreased contents of Al, Cd, Zn and Cu, as well as organic matter contents (OMC in the upper lake sediment suggest acidification of freshwater environments.     

Long‐term application of biowaste compost versus mineral fertilization: Effects on the nutrient and heavy metal contents of soil and plants

In recent years the use of biowaste compost (BC) as a soil amendment is of increasing interest. The aim of the experiment was to investigate the influence of different fertilization systems: biowaste compost, annual average of 32 Mg ha^—1 BC (fresh matter) and mineral fertilizer (83:52:95 kg ha^—1 NPK fertilizer) on the nutrient and heavy metal contents of soil and plants. Soil samples (1997) and harvest products (1996—1998) from a field trial (initiated 1992) were analyzed for K, Mg, P, Cu, Mn, Mo, Zn, Cd, Ni, and Pb. The five‐year fertilization with composted biowaste did not influence the total contents of Cd, Mn, Mo, and Ni in soil. The total soil contents of Zn and Pb were significantly higher in soils of the BC treatment than in the unfertilized control. Both fertilized plots tended to have higher Cu and Zn contents in harvest products than the unfertilized control. The mineral fertilization inhibited the Mo uptake by plants. In 1998 the mineral fertilization led to higher, and the biowaste compost application to lower, Cd contents in potato tubers as compared to the control.     

Effect of wastewater irrigation on mineral com‐position of corn and sorghum plants in a pot experiment

Effect of wastewater irrigation was investigated on mineral composition of corn and sorghum plants in a pot experiment. The ranges for the concentration of different minerals in corn plants were 0.67–0.89% calcium (Ca), 0.38–0.58% magnesium (Mg), 0.09–1.29% sodium (Na), 0.81–1.87% nitrogen (N), 1.81–2.27% potassium (K), 0.12–0.16% phosphorus (P), 190–257 mg/kg iron (Fe), 3.5–5.6 mg/kg copper (Cu), 37.1–44.5 mg/kg manganese (Mn), 21.6–33.6 mg/kg zinc (Zn), 1.40–1.84 mg/kg molydbenum (Mo), 11.0–45.7 mg/kg lead (Pb), and 2.5–10.8 mg/kg nickel (Ni). Whereas for sorghum plants, the ranges were: 0.56–0.68% Ca, 0.19–0.32% Mg, 0.02–0.27% Na, 0.69–1.53% N, 1.40–1.89% K, 0.10–0.14% P, 190–320 mg/kg Fe, 3.8–6.0 mg/kg Cu, 29.2–37.6 mg/kg Mn, 21.1–29.9 mg/kg Zn, 2.2–3.7 mg/kg Mo, 12.3–59.0 mg/kg Pb, and 2.5–15.2 mg/kg Ni. Heavy metals such as cobalt (Co) and cadmium (Cd) were below detection limits at mg/kg levels. The concentrations of Ca, N, K, P, Cu, and Mn in corn plants were in the deficient range except for Mg, Fe, Zn, and Al. The concentrations of Ca, N, P, K, Cu, Mn, Mg, and Zn in sorghum plants were in the deficient range except for Fe and aluminum (Al). The analysis of regression indicated a strong interaction between Pb, Ni, Ca, and Fe in corn and sorghum plants. In conclusion, waste water irrigation did not increase mineral concentrations of either macro‐ and micro‐elements or heavy trace metals in corn and sorghum plants to hazardous limits according to the established standards and could be used safely for crop irrigation.     

MINERAL ELEMENT DISTRIBUTION AND ACCUMULATION PATTERNS WITHIN TWO BARLEY CULTIVARS

Growth stage effects on distribution of mineral nutrients or beneficial elements phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), sulfur (S), chloride (Cl), iron (Fe), zinc (Zn), manganese (Mn), copper (Cu), molybdenum (Mo), sodium (Na), silicon (Si) and nickel (Ni), and the elements bromine (Br), rubidium (Rb), strontium (Sr), barium (Ba), lanthanum (La), cerium (Ce), and uranium (U) in two barley (Hordeum vulgare L.) cultivars and how the distribution of these elements changed were determined during the 2006–2007 growing season in a field experiment. Barley plants were sampled from the field at shooting, heading, soft dough, hard dough and harvest stages, and mineral nutrients and other elements concentrations of spike, flag leaf, old leaf, and stem samples were determined by polarized energy dispersive X-ray fluorescence (PEDXRF). Distribution patterns varied considerably from element to element. At the end of the season much of the Ca, Mg, S, Si, Fe, Mn, Cu, Ni, Sr, Ba, La, Ce, and U were located in the spikes. However, much of the P, K, Zn, Cl, Na, Br, and Rb remained in the old leaves or stem.     

包头市铜厂周边土壤中重金属垂直分布特征与形态分析

为了解包头市铜厂周边地区土壤剖面中重金属污染状况,采用火焰原子吸收分光光度法和Tessier连续提取法,对土壤中6种重金属（Cu,Zn,Mn,Ni,Pb和Cd）的垂直分布特征、形态及潜在生物可利用性进行了分析。结果表明:研究区土壤剖面各层土壤中6种重金属含量均超过内蒙古土壤背景值,Cu,Pb和Cd为主要污染物。随采样深度的增加,Cu,Zn,Pb和Mn的含量呈现下降趋势,且由相关性系数可知重金属Cu,Zn和Pb可能有相同人为或自然污染源;土壤剖面中6种重金属均主要以残渣态存在,含量均在50%以上,对生物危害较小;潜在生物可利用性分析结果为:Cu（32.61%） > Mn（31.85%） > Ni（24.90%） > Zn（16.60%） > Cd（15.23%） > Pb（14.87%）,Cu和Mn的潜在生物可利用性较大,其次为Ni,Zn,Cd和Pb潜在生物可利用性较小。     

Effects of fertilization, crop year, variety, and provenance factors on mineral concentrations in onions

Mineral concentrations of onions (Allium cepa L.) grown under various conditions, including factors (fertilization, crop year, variety, and provenance), were investigated to clarify how much each factor contributes to the variation of their concentrations. This was because the mineral concentrations might be affected by various factors. The ultimate goal of this study was to develop a technique to determine the geographic origins of onions by mineral composition. Samples were onions grown under various conditions at 52 fields in 18 farms in Hokkaido, Japan. Twenty-six elements (Li, Na, Mg, Al, P, K, Ca, Mn, Fe, Co, Ni, Cu, Zn, Rb, Sr, Y, Mo, Cd, Cs, Ba, La, Ce, Nd, Gd, W, and Tl) in these samples were determined by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry. Fertilization conditions and crop years of onions caused variations of P, Ni, Cu, Rb, Sr, Mo, Cs, and Tl concentrations in onions; different onion varieties also showed variations in numerous element concentrations. However, the variations of mineral compositions of onions by these factors were smaller than the differences between production places with a few exceptions. Furthermore, Na, Rb, and Cs in group IA of the periodic table, Ca, Sr, and Ba in group IIA, and Zn and Cd in group IIB showed similar concentration patterns by group; this result demonstrated that elements in the same periodic groups behaved similarly in terms of their absorption in onions.     

Biomass nutrient profiles of the microalga Nannochloropsis.

The nutritional composition of the marine eustigmatophyte Nannochloropsis spp. cultured in an indoor chemostat under continuous illumination was analyzed. Proximate composition, (moisture, ash, crude protein, available carbohydrates, fiber, lipids, and energy), nitrate, nucleic acid, mineral element (Na, K, Ca, Mg, Fe, Cu, Zn, Mn, Pb, Cd, Cr, Ni, Co, and S), fatty acid, and pigment (carotenoids and chlorophyll) concentrations were determined. On average, the biomass contained 37.6% (w/w) available carbohydrates, 28.8% crude protein, and 18.4% total lipids. Mineral in 100 g of dry biomass were as follows: Ca (972 mg), K (533 mg), Na (659 mg), Mg (316 mg), Zn (103 mg), Fe (136 mg), Mn (3.4 mg), Cu (35.0 mg), Ni (0.22 mg), and Co (<0.1 mg). Toxic heavy metal contents (Cd and Pb) were negligible. Fatty acid content was as follows (on percent dry weight): 0.6% of 14:0, 5.0% of 16:0; 4.7% of 16:1omega7, 3.8% of 18:1omega9, 0.4% of 18:2omega6; 0.7% of 20:4omega6, and 2.2% of 20:5omega3. Nutrient composition of the biomass was highly influenced by residence time in the photobioreactor. The biomass harvested for short residence times was richer in protein and eicosapentaenoic acid than biomass harvested for high residence time.     

干法半干法脱硫灰及其焙烧产物在农业上应用的安全有效性研究评价

通过对邯郸马头电厂、广州恒运电厂的2种脱硫灰以及广州恒运电厂脱硫灰与钾矿石高温焙烧产物进行了物理特性和化学成分分析,并在不同pH值下进行了浸出实验,对可溶的有效元素、微量元素特别是重金属的含量进行分析比较,对3种实验样品农业应用的安全有效性进行了研究评价。结果表明,3种样品的重金属As、Cr、Cu、Mo、Ni、Pb、Zn、Cd含量均远远小于国家标准,得出可以在农业上的安全使用;样品中的有效元素ca、Mg、Fe、Al、Na、Si的含量均在0．01％～1％之间,尤其是钾元素,实验浸出值在5％左右,可以在农业上得到有效的利用,因此在农业上应用有一定的有效性。     

Bulk sediment bioassays with five species of fresh-water oligochaetes

The fluxes of metals (Na, K, Ca, Mg, Fe, Mn, Al, Cu, Zn, Pb, Cd, Cr, and Ni) in two spruce forest soils in S. Sweden were quantified using the lysimeter technique. Amounts in precipitation (dry and wet), throughfall, litterfall and annual accumulation in biomass were also quantified, as well as stores in soil and biomass. The metal concentrations of the soil solutions varied greatly according to season. The leaching of some metals (Fe, Cu, Pb, Cr, and organic forms of Al) was associated with the leaching of organic matter. These complexes were leached from the A horizon in considerable amounts. They were precipitated in the upper B horizon and only small amounts were transported further downward. By contrast, the leaching of Na, Mg, Ca, Mn, Cd, Zn, Ni, and inorganic forms of Al increased with increasing soil depth. The concentrations of these metals also increased with increasing soil solution acidity. The highest concentrations were often found at the transition to the C horizon. The amounts of Na, K, Mg, Ca, Mn, Al, Zn, Cd, Cr, and Ni leached from the rooting zone were found to be larger than the amounts deposited from the atmosphere, the main source of these metals being the mineral soil. The reverse was true of Ph, Cu, and Fe, the sink being the upper part of the B horizon.     

Comparison of major and trace element concentrations in Danish greenhouse tomatoes (Lycopersicon esculentum Cv. Aromata F1) cultivated in different substrates

The concentration of major and trace elements was determined for tomato (Lycopersicon esculentumcv. Aromata F1) fruits grown in three different substrate systems. The systems were soil and rockwool irrigated with a normal nutrient solution and rockwool irrigated with a nutrient solution with elevated electrical conductivity (EC). At three harvest times, tomato fruits were analyzed for Ca, Cu, Fe, K, Mg, Mn, Na, P, S, Sr, and Zn by ICP-AES and for Cd, Cr, Mo, Ni, Pb, Sn, and V by HR-ICPMS. The concentrations of Ca, Cd, Fe, Mn, Mo, Na, Ni, Sr, and Zn were significantly different (p < 0.05) for tomato fruits grown on the different substrates. Between the harvest times different levels (p < 0.05) were shown for Ca, Cd, Fe, Mn Na, Ni, Sr, Zn Cu, K, Mg, P, Sn, and V. The concentration of Cd was >15 times higher and the concentration of Ca was 50-115% higher in soil-grown fruits than in rockwool-grown fruits. Principal component analysis applied on each harvest split the data into two groups. One group includes soil-grown fruits, and the other group includes rockwool-grown fruits with the two different nutrient solutions.     

Effect of bentonite characteristics on the elemental composition of wine

Physical, chemical, and mineralogical characteristics of six bentonites were assessed and related to their elemental release to wine. Extraction essays of bentonites in wine at three pH levels were carried out. The multielemental analysis of bentonites and wines was performed by atomic absorption spectrometry (AAS) and inductively coupled plasma mass spectrometry (ICP-MS). Bentonite addition resulted in significantly higher concentrations of Li, Be, Na, Mg, Al, Ca, Sc, V, Mn, Fe, Co, Ni, Ga, Ge, As, Sr, Y, Zr, Nb, Mo, Cd, Sn, Sb, Ba, W, Tl, Bi, and W. In contrast, the concentrations of B, K, Cu, Zn, and Rb significantly decreased. A strong correlation between Na concentrations of treated wines and its content in bentonite exchange complex was observed. Al and Fe contents reflected bentonite extractable aluminous and ferruginous constituents, while Be, Mg, Ca, V, Mn, Ni, Ge, Zr, Nb, Mo, Sn, Sb, Tl, Pb, and U concentrations reflected the elemental composition of bentonites. Several nonconformances with OIV specifications demonstrated the need for an effective control.     

Evaluation of Different Extraction Methods for the Assessment of Heavy Metal Bioavailability in Various Soils

The main objective of this study was to compare the effectiveness of different methods (heavy metals in pore water (PW), diffusive gradients in thin films (DGT), diethylene triamine pentaacetic acid (DTPA) extraction, and total heavy metals (THM) in soil) for the assessment of heavy metal bioavailability from soils having various properties and heavy metal contents. The effect of soil heavy metal pollution on shoot yield and sulfatase enzyme activity was also studied. Wheat (Triticum aestivum) was grown in different soils from Spain (n?=?10) and New Zealand (n?=?20) in a constant environment room for 25 days. The bioavailabilities of Cd, Cr, Cu, Ni, Pb, and Zn were assessed by comparing the metal contents extracted by the different methods with those found in the roots. The most widely applicable method was DGT, as satisfactory Cu, Ni, Pb, and Zn root concentrations were obtained, and it was able to distinguish between low and high Cr values. The analysis of the metal concentrations in PW was effective for the determination of Cr, Ni, and Zn content in root. Copper and Pb root concentrations were satisfactorily assessed by DTPA extraction, but the method was less successful with determining the Ni and Cr contents and suitable just to distinguish between high and low concentrations of Zn. The THM in soil method satisfactorily predicted Cu and Pb root concentrations but could only be used to distinguish between low and high Cr and Zn values. The Cd root concentration was not successfully predicted for any of the used methods. Neither shoot yield nor sulfatase enzyme activity was affected by the metal concentrations.     

Gehalte von Baumwurzeln an chemischen Elementen einschließlich Schwermetallen aus Luftverunreinigungen

Concentrations of chemical elements in tree roots including heavy metals from air pollution Total concentrations of P, S, Na, K, Mg, Ca, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb were measured in roots from beech, spruce, ash, maple and a forest herb (Mercurialis perennis). The root samples were taken from a site with an acid soil type (Saure Braunerde) and from a site with calcareous soil (Rendzina). All elements except Mn, Zn and Pb (on acid soils) and Ca (on calcareous soils) showed higher concentrations in finest roots (<1 mm diameter) compared to fine roots (1–2 mm). In the case of the toxic heavy metals, this is interpreted as a consequence of reduced root uptake due to physiological processes or to organic complexing, followed by an accumulation at the root surface. Compared with aboveground plant parts, roots show accumulation of Al, Pb, Cd and Zn, indicating reduced translocation from roots to shoots. Roots from acid soil show higher concentrations of P, Mn, and Pb than in calcareous soil. The concentrations of Al and heavy metals in the roots are considered to be a consequence of the contamination of the investigated forest sites by long-range transported air pollutants, i.e. acid precipitation and deposition of heavy metals.     

Microelement concentrations in Maryland air‐cured tobacco

Abstract

In an effort to expand the data base concerning heavy metal concentrations in Maryland tobacco and to acquire information on the nutritional status for Cu, 402 samples of cured tobacco collected on farms over the period 1980 to 1983 were analyzed for their Zn, Mn, Pb, Ni, and Cd contents, and the Cu contents were examined in 198 samples from 1982 and 1983. Mean concentrations for individual metals in mg/kg were: Zn (43.6), Cu (7.6), Mn (192), Pb (1.92), Ni (1.20), and Cd (2.26). Approximately 5% of the samples contained Zn, Cu, Ni, Pb, or Cd concentrations higher than expected for these elements in Maryland tobacco. Some 25% of the samples contained Mn levels within the range 332–2400 mg/kg which were likely caused by low soil pH conditions. A total of 5% of the cured samples were borderline deficient in Zn (≤18 mg/kg), and 27% were considered deficient in Cu (≤5.2 mg/kg). Problems associated with inadequate liming programs and the use of croplands for municipal waste disposal were discussed.     

Determination of Major and Trace Elements in Plant Samples by Inductively Coupled Plasma–Mass Spectrometry

The determination of several trace elements [arsenic (As), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), molybdenum (Mo), nickel (Ni), and lead (Pb)] in plant samples using inductively coupled plasma–mass spectrometry (ICP‐MS) was evaluated. It was established experimentally that moderate amounts (0.2–2%) of dissolved solids decreased the analyte signals significantly. Internal standardization with Rh was efficiently used to compensate for these matrix effects. The accuracy of the method was verified using reference materials digested according to two different procedures: dry ashing and microwave digestion. No significant differences were observed between measured concentrations and certified values. The investigation was next extended for the determination of major elements [aluminum (Al), boron (B), calcium (Ca), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), sodium (Na), phosphorus (P), and zinc (Zn)] on the same reference materials. The ICP‐MS values agree well with the values supplied. However, it appeared that Sc was the most useful internal standard for major elements.     

Effect of chelate fertilizers on dry matter and metallic composition of bean plants in a pot experiment

Bean plants were grown in pots contaning 6 kg of loamy sandy soil. A basal dose of NPK (150–120–100 kg/ha) fertilizers was mixed with the soil before potting and was repeated when the bean plants were 30 days old. Five different fertilizers and three rates of each fertilizer were investigated in this study. Fertilizers were applied seven days after germination and all treatments were triplicated. Bean plants were harvested 20, 30, and 45 days after sowing, dried, weighed, and digested in nitric‐perchloric acids. Concentrations of 18 elements were determined in the digests using an inductively coupled argon plasma spectrometer. At the end of the experiment, soil samples were also collected and extracted with DTPA. Bean dry matter yield was not significantly (p<0.05) affected by fertilizer application. Concentrations of aluminum (Al), barium (Ba), calcium (Ca), cadmium (Cd), cobalt (Co), iron (Fe), manganese (Mn), molybdenum (Mo), strontium (Sr), nickel (Ni), titanium (Ti), vanadium (V), and zinc (Zn) were significantly (p<0.05) lower in plant samples collected from the control treatments. Fertilizer application had no significant effect on concentrations of copper (Cu), potassium (K), sodium (Na), magnesium (Mg), phosphorus (P), and lead (Pb) in bean plants. Metal concentrations decreased with an increase in plant age, probably due to dilution effect. DTPA‐extractable concentrations of Co, Fe, Mn, Zn, Pb, Mo, and V were not significantly (p<0.05) correlated to their respective concentrations in bean plants.     

Influence of graded EDTA applications on mobilization and translocation of trace elements—a soil column experiment

Increasing concerns about potential environmental effects of ethylenediaminetetraacetic acid (EDTA) accumulation in soils require better understanding of its behavior and its effect on trace element mobilization. In this study we investigated the effect of EDTA on soil trace element mobilization in undisturbed soil columns taken from a heavy metal contaminated field. The columns were leached by EDTA solutions of different concentrations under unsaturated, steady‐state conditions. The transport of trace elements (Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sn, Zn) and EDTA was monitored by regularly collecting the leachates. After the termination of the leaching experiment the soil columns were divided into 5 layers to determine trace elements and EDTA concentrations in the soil. The results revealed that the soil analysis alone was not suitable to infer mobilization or immobilization patterns in relation to the EDTA concentration, as the mobilized fraction was too small in relation to the total trace metal concentrations in the soil. Analysis of the leachates displayed that after 2–4 pore volumes the EDTA output concentration reached about 80% of the input concentration. The trace element concentrations in the leachates showed that some elements were mobilized by EDTA (Cd, Cu, Fe, Pb, Co, Ni, Zn) while others were immobilized (Mn, Cr, Mo, Sn) in the soil columns after EDTA application.     

脐橙幼苗新老叶片养分含量对大、中量元素短期缺乏的差异性响应

  【目的】  对比大、中量养分短期缺乏下脐橙新、老叶片中11种必需元素含量及变化,并分析缺素导致的营养元素间的相互影响。  【方法】  以一年生枳砧纽荷尔脐橙幼苗为试材进行了砂培试验。以完全营养液为对照 (CK),设置缺氮 (?N)、缺磷 (?P)、缺钾 (?K)、缺钙 (?Ca)和缺镁 (?Mg)处理,测定不同处理脐橙叶片（老叶和新叶）生长指标及矿质元素含量。  【结果】  所有缺素处理均导致叶片叶绿素含量降低,生物量减少,以缺氮处理最为显著。缺氮降低了叶片N、Ca、Cu、Mo含量;缺磷降低了叶片P、K、Mo含量;缺钾降低了叶片K含量;缺钙降低了叶片N、Cu、Zn、Mo含量但增加了P含量;缺镁降低了叶片Ca、Mg、Zn、Mo含量但增加了K含量。以必需矿质元素为变量分别对各处理老叶和新叶进行主成分分析,老叶中第一主成分 (PC1)明显将缺钾处理与其他处理区分开,与对照相比,缺钾老叶离子组成变化为N (?3%)、P (+1%)、K (?71%)、Ca (+11%)、Mg (+39%)、B (+16%)、Mn (+11%)、Fe (+32%)、Cu (?7%)、Zn (+14%)、Mo (?63%);新叶中PC1明显将缺氮处理与其他处理区分开,缺氮新叶离子组成变化为N (?53%)、P (+8%)、K (+7%)、Ca (?14%)、Mg (+11%)、B (+55%)、Mn (+51%)、Fe (?14%)、Cu (?57%)、Zn (+4%)、Mo (?25%)。老叶和新叶中元素含量呈正相关的元素是N-Cu、N-Ca、Mg-Mn和Cu-Mo,呈负相关的是K-Zn。  【结论】  脐橙幼苗老叶对钾的短期缺乏反应最敏感,缺钾会显著降低老叶中K和Mo含量并增加Mg和Fe含量,而新叶对氮素的短期缺乏最敏感,缺氮显著降低新叶中N、Ca、Cu和Mo含量。短期缺少P、Ca和Mg对脐橙幼苗叶片中的养分含量影响较小。