Factors affecting forwarder productivity

Modern forwarders are an effective extraction option for timber harvesting operations that provide the opportunity for higher levels of mechanization. With their ability to carry logs from the forest to the roadside or processing areas, they have an established lower environmental impact in comparison to tree-length skidding options. However, little is published regarding their productivity potential or the factors that influence productivity. Three case studies were carried out; (1) a selective harvest in Calabria, Italy, with a smaller 12 t capacity John Deere 1110E, (2) a clear-cut on the West Coast of New Zealand, with a larger 19 t capacity John Deere 1910E and (3) a larger clear-cut operation in Canterbury, New Zealand, with two John Deere 1910E forwarders. An elemental time and motion study was used resulting in 73.4 h of detailed data, with 159 cycles extracting 2241 m³ of timber. Productivity models were created for all three sites as well as one combined model. Average cycle time was 33.2, 24.2 and 22.8 min, and average productivity 24.6, 37.1 and 42.7 t per productive machine hour, respectively. Cycle time was the fastest, and consequently productivity the highest, at the Canterbury site where the terrain roughness was low, overcoming any effect of the average small piece size (0.59 m³). Travel speed was slowest at the West Coast site showing the effect of wet and difficult terrain, with travel empty speed being just 3.8 km/h, compared to 6.7 and 6.9 km/h at the other two sites. Productivity at the two clear-cut operations was significantly higher than the selective cut, compounded by the use of the larger capacity forwarders. Distance and payload were significant factors for each cycle time model; in the combined model the sites were also significant. The calculated unit cost of forwarder extraction in the sites ranged from €2.55 to €4.70/m³. For regions such as southern Italy that have relatively low levels of forest mechanization, this information can be used to help design and improve more traditional labor-intensive harvesting systems.     

A comparison of harvesting productivity and costs in thinning operations with and without midfield

Mechanised thinning operations can be carried out in the forest where skid roads are provided on which harvesters and forwarders can move. In the transition to continuous cover forestry (CCF) it is better to keep a thinner network of skid roads in the forest. Instead of tracks for harvesters and forwarders, these areas can be used for younger generations of trees. Moreover, fewer skid roads in the forest environment make the stand more natural. Fewer skid roads were introduced in this research as an alternative thinning operation with midfield¹ (MF) to the most popular mechanised thinning operation with skid roads² (SR). The aim of this paper is to analyse the productivity and economic aspects of thinning operations based on harvesters and forwarders, where there are different distances between skid roads. In both of the operations, harvesters and forwarders were used, but in the MF operation a chainsaw was additionally used to cut trees beyond the reach of the harvester boom. The distances between skid roads in the MF operation were 35–38 m, while in the other they were 18–20 m. The research was carried out in premature pine stands in a flat terrain in Poland. Bigger productivity and lower costs were found in the MF thinning operations. In the younger 44-year-old stand, the average harvester (Timberjack 770) productivity (in operational time) in the MF operation was 5.87 m³h⁻¹ and in the SR operation 4.52 m³h⁻¹; forwarding provided by the Vimek 606 6WD achieved a productivity of 5.03 and 4.52 m³h⁻¹, respectively. In the older 72-year-old stand, the Timberjack 1270B productivity was 11.53 m³h⁻¹ in MF and 8.70 m³h⁻¹ in SR; the Timberjack 1010B forwarder achieved 11.22 m³h⁻¹ (MF) and 8.84 m³h⁻¹(SR).The costs of harvesting and forwarding 1 m³ of wood were lower in the MF operations. In the younger stand, harvesting costs were 5.78 €/m³ (MF) and 6.72 €/m³ (SR) while forwarding costs were 1.94 and 2.18 €/m³ respectively. In the older stand, harvesting costs were 5.58 €/m³ (MF) and 6.78 €/m³ (SR); the forwarding costs were 2.65 €/m³ (MF) and 3.41 €/m³ (SR).     

Time Consumption and Production Costs of Two Small-Scale Wood Harvesting Systems in Northern Greece

A field-based study was carried out to determine the productivity and production cost of the tree length (TL) and the wood assortment (WA) systems implemented under small-scale forestry conditions in two Scots pine stands in Northern Greece. Tree felling and processing productivity were estimated at 8.64 m³ per productive machine hour (PMH^?1) and 10.21 m³ PMH^?1, respectively. Wood felling and processing times were strongly dependent on dbh and total tree volume. However, when manual debarking was also considered the productivity rates decreased to 1.96 and 1.43 m³ PMH^?1, respectively. Skidding productivity was calculated to be 3.35 m³ PMH^?1 for TL and 7.17 m³ PMH^?1 for WA, respectively. Strong correlations have been found between the net skidding time and (a) the skidding distance and (b) the load per turn in both wood harvesting systems. Production costs varied greatly, from 19.38 € m^?3 up to 44.81 € m^?3 of roundwood depending on the harvesting system and the inclusion of debarking. The findings suggest that the WA system is more efficient in terms of productivity and production cost than TL, and that there is a substantial optimization potential. The optimization potential can be encoded in four suggestions: (a) opening up of more forest roads to reduce high skidding times, (b) replacement of manual debarking by mechanical debarking at the sawmill, (c) replacement of old pieces of equipment with newer ones and (d) training of the existing workforce.     

Application of a Small-Scale Equipment System for Biomass Harvesting

The small-scale harvesting equipment system has been and continues to grow in use in forestry operations in some regions in the world. This harvest system can include a range of equipment types, such as feller-bunchers or chainsaws, skidders or farm tractors, and chippers. These machines are generally smaller, lower cost and less productive than larger, more advanced forestry machines. The objective of this project was to investigate the feasibility of a small scale harvesting system that would produce feedstock for a biomass power plant. The system had to be cost competitive. A boom-type feller-buncher, a small grapple skidder and a chipper were tested as a small-scale system. In this study, feller-buncher and skidder productivity was determined to be 10.5 m³ per productive machine hour, and production for the chipper was determined to be 18 m³ per productive machine hour. Production from the system did not reach the desired levels of 4 loads/day (25 m³/load); however, the system was able to produce about 3 loads/day. The results showed that the system currently could fill a roadside van for $16.90/m³, but suggested machine modifications could potentially reduce the system cost to $12.73/m³. Residual stand damage was minimal, especially on flatter ground and not operating on a slash layer. Soil disturbance from the harvesting system was predominantly undisturbed or classified as a shallow disturbance.     

A Survey of Logging Contract Rates in the Southern European Alps

A survey of harvesting contracts was conducted in the Alpine regions of France and Italy. The main goal was to produce a benchmark for the harvesting contract rates in the area that may guide forest owners and logging contractors when making their harvesting decisions. The sample included 443 contracts, evenly distributed between France and Italy. The mean tract size was 9.17 ha, while the mean lot size was slightly larger than 500 m³ under bark (ub). Mean removal intensity varied from 70 to 120 m³ ub ha^?1, depending on country and harvesting technique (i.e. ground-based or cable-yarder based). Mean contract rate was 35€ m^?3 ub, but individual contract rates varied significantly between countries and for different harvest techniques. Regression analysis showed that contract rate was strongly affected by tree size, extraction distance and harvest technique. Contrary to expectation, neither tract size nor lot size had any effect on contract rate. This may be explained by the widespread use of mobile operations that are specifically designed for handling small lots and incur minimum relocation cost. The technical factors explored in the study could only explain 40 % of the variability in the dataset, and therefore at least part of the variability must derive from non-technical factors such as local market dynamics and national economics. The study did find significant differences between countries. In particular, ground-based operations were more cost efficient in France, and cable yarder-based operations in Italy.     

Veneer grades, recoveries, and values from 5-year-old eucalypt clones

Context

Processing young, small eucalypt logs into veneer is a burgeoning industry across southern China. However, plantations supplying these logs were mostly established for pulpwood; little information is available on variation and selection among commercial eucalypt clones/varieties in regards to suitability for veneer production.

Methods

Tree growth and log form were assessed on 11 eucalypt clones from a 5-year-old trial in southern China. Logs from these were rotary peeled for veneer; recovery percentages plus a range of quality and value traits were assessed on the outturn.

Results

Tree volumes, green veneer recovery ratios (%), veneer quality grades, log value, and value m^?3 varied significantly among both clones and log positions up the stem. The clone with the best veneer recovery ratio (50.5 %) provided nearly twice that of the poorest clone (28.4 %). Average veneer value log^?1 by clone ranged from RMB 6.7 (US$1) up to RMB 15.1 (US$2) and average value m^?3 by clone ranged from 589 RMB?m^?3 (US$88) up to 925 RMB?m^?3 (US$139). Overall, sweep was the key factor influencing veneer recovery ratio and value. Knots, especially dead knots, holes and splitting were major factors influencing veneer quality grade. Middle and upper logs had significantly higher veneer recoveries, grades, and values m^?3 than the lower logs.

Conclusions

Excellent potential exists for selecting among eucalypt clones, and even among log positions within trees, for optimizing veneer production.     

Time Prediction Models and Cost Evaluation of Cut-To-Length (CTL) Harvesting Method in a Mountainous Forest

Time equations are derived for felling with chainsaw, skidding with cable wheeled skidder, loading with grapple hydraulic loader and trucking of logs within a cut-to-length harvesting method. The continuous time study method was applied to collect data for felling, skidding, loading and a transportation model. Multiple regression analysis via SPSS software was applied to develop the time models. Felling time was found to be highly dependent on diameter at breast height. Skidding distance, winching distance, slope of the trail and piece volume were significant variables for the skidding time prediction model. The loading time model was developed considering piece volume. Transportation distance and load volume were used as independent variables in modeling the transportation time. The net production of felling was estimated at 12 trees/h (56.65 m³/h). The net production rates for skidding, loading and traveling averaged 18.51, 41.90 and 3.32 m³/h respectively. The total cost of harvesting from stand to mill was estimated 19.70 €/m³. The skidding phase was the most expensive component of the cut-to-length method. The bucking and delimbing components were less costly than the other logging phases. The results of this study can be used for harvesting planning and productivity optimization.     

The effect of quality bucking and automatic bucking on harvesting productivity and product recovery in a pine-dominated stand

On-board computers (OBC) of harvesting machines can now provide optimized bucking (task of cutting stems into different log lengths) by relying on value and demand matrices. Despite existing benefits of these systems in certain countries, they remain largely underutilized and generally poorly understood in German mechanized forest operations. The study aimed to compare and quantify the differences in harvesting productivity and value recovery between two treatments: quality bucking (OFF) and automatic bucking (ON). A mature forest stand with a high proportion of Scots pine (Pinus sylvestris L.) was divided into plots (30 m × 100 m) where initial tests of both treatments were randomly distributed and replicated 10 times for a total of 11 plots per treatment. Pre-harvest inventory was performed on each tree targeted for removal via a commercial thinning silvicultural treatment. Mechanized harvesting was performed with an excavator-based Atlas Kern T23 Königstiger single-grip harvester. The same assortment specifications and prices were used for both treatments but on-board optimized bucking solutions were applied in the ON plots, whereas the operator had full control of the products to be recovered in the OFF plots. During harvesting operations, continuous time and motion was performed in all plots. Average harvesting productivity was higher—but not statistically significant—in OFF plots compared to ON plots by 2.0 and 0.46 m³/PMH₀ for pine and spruce trees, respectively. Even if there was no difference detected in volume recovery for both treatments and tree species, value recovery was more than 1.60 € per cubic meter higher for pine in larger diameter classes when using quality bucking. This may be due to the fact that the algorithm of the OBC is designed for pine trees with a simpler crown architecture than trees harvested in this study. Results supporting quality bucking over automatic bucking in a Scots pine-dominated stands provide important forest operational information to managers.

     

Long-term study of above- and below-ground biomass production in relation to nitrogen and carbon accumulation dynamics in a grey alder (Alnus incana (L.) Moench) plantation on former agricultural land

In the Northern and Baltic countries, grey alder is a prospective tree species for short-rotation forestry. Hence, knowledge about the functioning of such forest ecosystems is critical in order to manage them in a sustainable and environmentally sound way. The 17-year-long continuous time series study is conducted in a grey alder plantation growing on abandoned agricultural land. The results of above- and below-ground biomass and production of the 17-year-old stand are compared to the earlier published respective data from the same stand at the ages of 5 and 10 years. The objectives of the current study were to assess (1) above-ground biomass (AGB) and production; (2) below-ground biomass: coarse root biomass (CRB), fine root biomass (FRB) and fine root production (FRP); (3) carbon (C) and nitrogen (N) accumulation dynamics in grey alder stand growing on former arable land. The main results of the 17-year-old stand were as follows: AGB 120.8 t ha^?1; current annual increment of the stem mass 5.7 t ha year^?1; calculated CRB 22.3 t ha^?1; FRB 81 ± 10 g m^?2; nodule biomass 31 ± 19 g m^?2; fine root necromass 11 ± 2 g m^?2; FRP 53 g DM m^?2 year^?1; fine root turnover rate 0.54 year^?1; and fine root longevity 1.9 years. FRB was strongly correlated with the stand basal area and stem mass. Fine root efficiency was the highest at the age of 10 years; at the age of 17 years, it had slightly reduced. Grey alder stand significantly increased N and C_org content in topsoil. The role of fine roots for the sequestration of C is quite modest compared to leaf litter C flux.     

Productivity of successive rotations of Acacia mangium plantations in Sumatra,Indonesia: impacts of harvest and inter-rotation site management

The impacts of wood harvest, biomass removal and inter-rotation site management practices on productivity of Acacia mangium in South Sumatra were studied over 12 years across successive rotations. The productivity measured as MAI increased from 29.4 m³ ha^?1 year^?1 in the first to 48.0 m³ ha^?1 year^?1 in the second rotation. Whole tree harvesting (total stem, branches and leaves) caused a 21 % reduction in volume compared to harvesting merchantable wood alone in the next rotation. The rates of nutrients accumulation in trees were highest during the first year of growth, and declined from age 2 years. Significant amounts of nutrients were recycled through litter fall from 1 year after planting. Results highlight the importance of management which promotes nutrient supply on stand growth. Removal of slash and litter lowered soil pH, by about 0.1 unit. A small reduction was also found in soil organic carbon and nitrogen in the top soil during the first 3–4 years but values returned to pre-harvest levels by the end of the rotation. Extractable soil phosphorus and exchangeable cations decreased by the end of second rotation but these measures underestimate the nutrient pools available for A. mangium. These findings along with results from other studies have helped to implement operations which promote conservation of site resources for sustainable production in the region.     

Deadwood volume assessment in Calabrian pine (Pinus brutia Ten.) peri-urban forests: Comparison between two sampling methods

In the Sustainable Forest Management, deadwood is a fundamental substrate for numerous species, and a key factor in carbon and nutrient cycles. The main aim of the paper is to estimate the amount of deadwood in two Calabrian pine forests (Monte Morello in Italy; Xanthi in Greece) characterized by different stand conditions and management practices. The second aim is to compare two different sampling methods to estimate the volume of lying deadwood: the fixed-area sampling (FAS) method and the line intersect sampling (LIS) method. The results show that the Monte Morello peri-urban forest is characterized by a high quantity of deadwood (75.1 m³ ha^?1) divided in 80% of lying deadwood, 18% of standing dead trees, and 2% of stumps. The Xanthi peri-urban forest is characterized by a total amount of deadwood of 9.21 m³ ha^?1 divided in 34% of lying deadwood, 18% of standing dead trees and 48% of stumps. The mean volume of lying deadwood in Monte Morello estimated using the FAS is 59.91 m³ ha^?1, while using the LIS the mean volume is 64.9 m³ ha^?1. In the Xanthi, the mean volume of lying deadwood is 3.11 m³ ha^?1 using FAS and 5.49 m³ ha^?1 using LIS.     

Productivity and optimal management of the uneven-aged hardwood forests of Hyrcania

Hyrcania is a productive region near the southern coast of Caspian Sea. Her forests are mostly uneven-aged beach-dominated hardwood mixtures. There is increasing willingness to treat these forests without clear-felling, following the ideas of continuous cover management. However, lack of growth and yield models have delayed this endeavor, and no instructions for uneven-aged management have been issued so far. This study developed a set of models that enable the simulation of stand development in alternative management schedules. The models were used to optimize stand structure and the way in which various initial stands should be converted to the optimal uneven-aged structure. The model set consists of individual-tree diameter increment model, individual-tree height model, survival model, and a model for ingrowth. The models indicate that the sustainable yield of the forests ranges from 2.2 to 7 m³ ha^?1 a^?1 in uneven-aged management, depending on species composition. Better ingrowth would substantially enhance productivity. The optimal stand structure for maximum sustained yield has a wide descending diameter distribution, the largest trees of the post-cutting stand being 80–100 cm in dbh. If cuttings are conducted at 30- or 40-year intervals, they should remove 20–40 largest trees per hectare. Despite moderate growth rate, uneven-aged management produces high incomes, 850–1,000 UDS ha^?1a^?1, because the timber assortments that are obtained from the removed large trees have very high selling prices. Optimal conversion to uneven-aged structure showed that the steady-state stand structure depends on initial stand condition and discount rate when the length of the conversion period is fixed. Discount rates higher than 1 % lead to reduced wood production, heavy cuttings, and low basal areas of the steady-state forest.     

Stand characteristics of mixed oriental beech (<Emphasis Type="Italic">Fagus orientalis</Emphasis> Lipsky) stands in the stem exclusion phase,northern Iran

The structure of forest stands changes through developmental phases. This study is carried out in the unmanaged, oriental beech (Fagus orientalis Lipsky) stands in the north of Iran. The aim of this research was to quantify structural characteristics of stands in the stem exclusion phase using common structural indices, which include mingling, tree–tree distance, stem diameter, and tree height differentiation. According to our measurements from three stands, naturally regenerated stands tend to be mixed in species composition have slightly heterogeneous diameter distributions and uniform tree height. The average distance between trees was 3.3 m. Stocking volume of the stands had an average of 540 m³ ha^?1 and 412 stem ha^?1. Dead wood volume was 24 m³ ha^?1, and as a standing volume, the most frequent species in dead wood pool was oriental beech (F. orientalis) (48 %). The common form of dead trees was snag (41 %). The mean value of mingling and tree-to-tree interval indices revealed that beech was mixed intensively with hornbeam and appears to be a more successful competitor for space and light compared with hornbeam; moreover, we found relatively high evidence of inter-species competition in this phase. A better understanding of stand characteristics in the stem exclusion phase as a critical part of the natural dynamics of forest ecosystems could facilitate predictions about the future changes within the stand.     

Sixty years of stand development in a southern appalachian cove-hardwood stand

For the southern Appalachian Mountains U.S.A., the development of a stand of cove hardwoods dominated by yellow-poplar (Liriodendron tulipifera L.) is described beginning with its inception after clearcutting in 1913, followed by a severe fire in 1916, and a cleaning in 1923. No subsequent treatments were imposed; natural mortality was the only factor affecting stand development since 1923. Stand density, basal area, and average stem diameter by individual species are shown for six stand ages. Diameter distribution of the 247 largest trees per ha is also shown for six stand ages. In 60 years, the cleaned stand produced 701 m³/ha of timber compared with 558 m³/ha for the uncleaned stand. Total basal area was greater by 8.58 m²/ha in the cleaned stand.     

Characteristic fuel consumption and exhaust emissions in fully mechanized logging operations

A study was done using eight different logging machines (harvesters and forwarders) in clear-felling operations to quantify the associated fuel consumption, and to define the inherent relationship between engine output power and fuel consumption. Exhaust emissions were also calculated on the basis of mean fuel consumption values, obtained by measurements, and from the developed regression and correlation model for diesel and rapeseed methyl ester (RME) fuels. The calculation considered exhaust emissions associated with the manufacture, distribution, and combustion of the respective fuels. It was found that carbon dioxide emissions amounted to 9.63 kg/m³ of delivered timber for diesel fuel, and to 10.64 kg/m³ for RME. It was also found that when using RME only 2.82 kg/m³ of carbon dioxide emissions originated from fossil resources, therefore, it is only this amount that can be deemed an environmental load, confirming RME as a lesser environmental pollutant.     

Long-term response to area of competition control in <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> plantations

Numerous studies have quantified the responses to vegetation management in Eucalyptus plantations but most publications have reported early responses in tree growth and a gap in knowledge exist about the magnitude and duration of growth responses throughout the whole rotation. We evaluated the long-term response (9 years-old) of E. globulus across a gradient of sites to different intensity levels of free area of competing vegetation around individual tree seedlings. Competing vegetation intensity levels considered free areas ranging between 0 (control) to 2.54 m² plus a treatment with total weed control. Competing vegetation biomass production during the first growing season was 2.9, 6.5, 2.2 and 12.9 Mg ha^?1, for sites ranging from low to high annual rainfall. Across sites, maximum response in stand volume ranged between 58 and 262 m³ ha^?1 at age 9 years and was proportional to the amount of competing biomass controlled during the first growing season. Total competing vegetation control showed the largest response in stand volume at sites with 2.9 and 12.9 Mg ha^?1 of competing vegetation. However, the 2.54 m² vegetation control treatment showed the maximum response for sites with 2.2 and 6.5 Mg ha^?1 of competing vegetation. The duration of response for vegetation control treatments ranged between 5 and 9 years. However, at the site with the largest accumulation of competing vegetation biomass the response to vegetation control showed a sustained and divergent response. Our results suggest that vegetation control improved site resources acquisition increasing long-term stand productivity by reducing environmental limitations to tree growth differentially at each site.     

Analyzing time and fuel consumption in road transport of round wood with an onboard fleet manager

Round wood supply in Austria is often affected by different factors such as bottlenecks or oversupply due to changing market, weather and road conditions. An additional factor impacting the complex wood supply chain is the rising transport costs from the landing to the sawmill. Logging trucks are the primary transportation technology used from the forest to the customer??s site. The objectives of this study were to analyze the actual situation and characteristics of typical trucking activities for round wood supply from the region to an Austrian sawmill. The study used time and fuel consumption, proportion of travel on forest roads and average speed on different functional road classes to estimate productivity and costs. Data collection including GPS-tracking was done using fleet management equipment built into the driver??s cabin. The GPS-routes were analyzed in ArcGIS 9.3 based on the national road network and its attributes. The sawmill studied with a yearly demand of 600,000 m³ round wood was located in southern Austria. In total, more than 2,000 round trips operated by seven logging trucks recorded close to 100,000 km. The transport distance from the forest to the sawmill averaged 51 km. The average share on forest roads within a route to the sawmill was 14.2% with an average speed of 13.5 km/h, whereby the forest road is defined as road with minor importance. Transport costs from the forest site to the sawmill with a truck and trailer were ? 11/m³ solid timber based on an average load size of 25 m³. An average 0.77 l of diesel fuel per kilometer was consumed during a round trip including all work phases. A trip to an interim storage location consumed 2.05 l/km due to the number of work phases without driving distance.     

Wood Extraction with Farm Tractor and Sulky: Estimating Productivity, Cost and Energy Consumption

A winch and a sulky can transform a farm tractor into an effective small-scale logging machine, closely resembling a wheeled cable skidder. The additional cost of these implements is very small, but they offer significant benefits when extracting timber under the conditions of small-scale forestry. The authors developed a productivity model for skidding timber with wheeled farm tractors, equipped with winch and sulky. The origin data pool contained over 300 individual skidding cycles, extracted from 8 separate tests. Statistical analysis of the data allowed calculating a simple mathematical relationship for estimating skidding productivity as a function of significant work conditions, such as: piece size, winching distance, tractor power, skidding distance and crew size. This model can provide useful directions to prospective users, contributing to operation planning, costing and optimization. It can predict a large proportion of the variability in the data and was successfully validated using reserved cycle records, extracted from the same data pool and not used for model development. Depending on tractor power and piece size, the average turn volume and productivity can exceed respectively 2 m³ per cycle and 4 m³ per Scheduled Machine Hour (SMH). Top performance can reach 8 m³ SMH⁻¹, with heavy tractors and large logs.     

Forestry operations in the European mountains: a study of current practices and efficiency gaps

Timber production is an important ecosystem service of European mountain forests. This paper aimed to assess the current practices in logging operations and to identify the efficiency gaps in timber production. The study was located in 7 case study areas from representative European mountain ranges, where 632 logging operations were analysed. The focus was on road infrastructure, transport systems, harvesting methods and extraction technologies. Often inappropriate technology was used in steep terrain; there was no correlation between the average slope and the selection of harvesting systems (HS). Skidding was the most common extraction method (75%), while cable yarding and forwarding had shares of 15% and 8%. The mean road density was 18.5?m?ha^?1. The mean extraction distance was 501?m. The mean harvesting and extraction productivity were 9.0 and 10.2?m³?h^?1; the mean costs were 11.1 and 11.7?€?m^?³, respectively. Non-mechanized and obsolete HS reported the lowest efficiency and the highest environmental footprint, while fully mechanized systems reported the highest efficiency, the lowest number of accidents and the lowest stand damage. Cable yarders are the appropriate extraction technology in steep terrain, but they require a well-developed road network. Higher mechanization degree, improved quality of the road networks, knowledge transfer to practice and training of forest workers are some of the necessary measures to overcome the efficiency gaps in timber production in European mountain forests.     

Estimating water use of a black locust plantation by the thermal dissipation probe method in the semiarid region of Loess Plateau, China

Black locust (Robinia pseudoacacia) is a major reforestation species in the semiarid region in the Loess Plateau of China. There has been increasing concern about the sustainability of the plantations because of their possible high water-use. This study was, accordingly, undertaken to quantify the stand-scale water use of a middle-aged black locust plantation in the region. The thermal dissipation probe method was applied to 27 trees to measure sap flux densities in an experimental plot during the growing season of 2008. The monoculture stand has a basal area of 23.3 m² ha^?1 and a maximum plant area index (PAI) of 2.89. Sapwood areas were estimated by use of a regressive relationship with the diameter at breast height (DBH) for scaling up of stand transpiration. The results showed that DBH could be a good predictor of sapwood area of individual trees. The diurnal cycles of average sap flux densities differed among DBH classes. Daily transpiration can be predicted from mean daily daytime vapor pressure deficit (VPD_m) using a fitted exponential saturation model. Model variables were different among seasons, probably owing to different soil water conditions and leaf phenology. By using the derived model for each month, stand canopy transpiration over the growing season was estimated to be 73.8 mm, with an average daily value of 0.41 mm day^?1 and a maximum of 0.89 mm day^?1. The relatively small estimates of stand transpiration might be attributed to low PAI and sap wood area of the middle-aged stand.