Geographic variation in tree growth and wood density of <Emphasis Type="Italic">Guazuma crinita</Emphasis> Mart. in the Peruvian Amazon

Guazuma crinita Mart. is a fast-growing timber tree in the Peruvian Amazon. A trial of 11 Peruvian provenances was established in three planting zones. Tree growth at 6, 12, 18 and 30 months and wood density at 32 months were analyzed across and within zones. Zones accounted for more variation than provenances. Density varied significantly due to provenances in the analysis across zones, whereas growth exhibited strong provenance by zone interactions. The local provenance grew well and produced relatively dense wood in all zones. The relative magnitude of variation due to provenances depended on the planting zone. Density was greater in the lower than in the upper stem. Density increased with longitude from the more humid to the drier part of the sample region. In general, correlations indicated that larger trees had lower density and a larger difference in density between the lower and upper stem, but the strength of these relationships depended on the provenance and zone. Results suggest that fast-growing provenances can be selected at an early age without significantly reducing wood density. The local provenance is recommended for reforestation pending future research demonstrating the superiority of foreign provenances. Some practical implications for tree-improvement programs are discussed.     

Phenotypic plasticity blurs ecotypic divergence in the response of <Emphasis Type="Italic">Quercus coccifera</Emphasis> and <Emphasis Type="Italic">Pinus halepensis</Emphasis> to water stress

The Mediterranean evergreen woody plants Quercus coccifera and Pinus halepensis grow in a range of environments where selection by drought, heat and high irradiance can drive genetic and phenotypic differentiation of populations. However, the role of these stresses in filtering out maladaptive genotypes remains unknown. We hypothesize that this filtering is an important process for woody Mediterranean species due to their low phenotypic plasticity reported in previous studies. We have studied the response of saplings of Q. coccifera and P. halepensis, originating from two contrasting populations (a rock outcrop and a garrigue formation), to water stress. Isozyme characterization of genetic diversity was done to determine whether populations were genetically distinct. Water response analysis was based on water relations, gas exchange, chlorophyll a fluorescence, pigment content, antioxidant status and morphological and structural parameters. Ecotypic differentiation was found for both Q. coccifera and P. halepensis populations, with a higher population isozyme similarity and a higher frequency of dominance of a few genotypes at the rock outcrop in both the species. P. halepensis exhibited small but significant differences between populations for plastic responses to water, with lower phenotypic plasticity in saplings from the rock outcrop. Although it was not found in Q. coccifera, this pattern suggests that ecotypic differentiation rendering stress-tolerant ecotypes involves a decreased plasticity. Phenotypic plasticity was not high but it explained over 75% of the total variability among individual plants. Thus, and although evidence for ecotypic divergence was found in both the species, saplings were plastic enough to blur ecotypic differentiation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Genetic correlations between wood quality traits of <Emphasis Type="Italic">Pinus pinaster</Emphasis> Ait

• ? It is essential to understand how characteristics are related to each other in breeding programmes to select wood properties, in order to avoid that, in selecting for one trait, we are negatively affecting another. Moreover, measuring wood properties is time consuming and expensive.
• ? This study assesses genetic and phenotypic correlations between wood density components and spiral grain of 46 half-sib families of Pinus pinaster in seventeen-year-old trees.
• ? Results showed that genetic correlations for all wood density components were higher than corresponding phenotypic correlations. Furthermore, all wood density components were highly genetically correlated with ring density, and also closely associated among themselves. Results showed a higher genetic correlation of ring density with earlywood density (r _g = 0.96) than with latewood density r _g = 0.79). A moderate to high positive genetic correlation was found between spiral grain and wood density characteristics (0.29–0.61).
• ? We conclude that ring density (overall wood density) can be improved by increasing either earlywood density, latewood percent, or both of these traits, and spiral grain can be modify in future plantations.

     

Genetic difference in adventitious rhizogenesis in <Emphasis Type="Italic">Albizia procera</Emphasis> Benth. with IBA treatment

Variable adventitious rhizogenesis of juvenile shoot cuttings was observed in seven half-sib families (TP-1, BAN-1, AN-3, JR-3, SL-16, UM-3, and UM-5) of Albizia procera Benth. Treatment with IBA invariably promoted sprouting by 8%, adventitious rooting by 218%, root number by 869%, and root length by 36.4% compared with the control. Interaction between families and IBA treatment significantly enhanced sprouting and root length in BAN-1, JR-3, UM-3, and UM-5, and root number in all families, but had a significant suppressive effect on sprouting in AN-3. Treatment with IBA increased family heritability (h _f ²) 1.38-fold for sprouting, 2.86-fold for adventitious rooting, and 10.86-fold for root number, but reduced family heritability by a factor of 8.25 for root length. Thus, direct genetic effects seem to have strongly affected sprouting and adventitious rooting, with IBA playing an auxiliary role, but had little effect on root number and length, for which IBA had a dominant regulatory role.     

Genetic and environmental variation in wood properties of <Emphasis Type="Italic">Acacia melanoxylon</Emphasis>

Context  

Australian blackwood (Acacia melanoxylon), is a fast-growing, high-quality, appearance-grade timber species native to eastern Australia. Some of its key wood properties are percentage heartwood, heartwood colour, basic density, wood stiffness and green moisture content. Variation in these properties affects log value, processing and marketing.     

Radial variations of wood properties of an endangered species, <Emphasis Type="Italic">Pinus armandii</Emphasis> var. <Emphasis Type="Italic">amamiana</Emphasis>

A dead tree of Pinus armandii Franch. var. amamiana (Koidz.) Hatusima (abbreviated to PAAm) was obtained from a natural habitat on Tanega-shima Island and various properties of its wood were investigated. Grain angle was measured and soft X-ray analysis was undertaken to obtain the density in each annual ring. Unit shrinkage and dynamic properties were measured by shrinkage, bending, and compression tests. Variations of wood properties in the radial direction, relationships of wood properties to density, and annual ring width were examined. Roughly speaking, variations in the radial direction of the grain angle, twist angle by drying, Young’s modulus and strength in static bending, absorbed energy in impact bending, compressive Young’s modulus, compressive strength, and compressive proportional limit corresponded to the variation of annual ring width. As a result, it was determined that if PAAm is afforested artificially for the purposes of lumber production and conservation, the annual rings of logs should not be too widely spaced. Wood properties of PAAm were similar to those of Japanese black pine (Pinus thunbergii Parl.), which is another representative pine on Tanegashima Island. This study was presented in part at the 56th Annual Meeting of the Japan Wood Research Society, Hiroshima, August 2007     

Effect of stocking on juvenile wood stiffness for three <Emphasis Type="Italic">Eucalyptus</Emphasis> species

The effects of stocking on wood stiffness (MoE) for three Eucalyptus species are quantified using a 6-year-old trial established in New South Wales, Australia. An acoustic time-of-flight tool measured the velocity between two probes in the outerwood, from which the stiffness was estimated. Four stocking levels (714, 1,250, 1,667 and 3,333 sph) were examined. Stiffness varied significantly between all species, with E. cloeziana showing the highest stiffness (14.2–15.7 GPa), followed by E. pilularis (12.2–13.5 GPa) and E. dunnii (10.7–12.6 GPa). There was a stiffness increase (around 11%) between 714 and 1,250 stems/ha for all species but thereafter differences between stockings were not always significant. Trees were also assessed for basic density, dbh, total height, crown area, green crown height and stem slenderness (height/dbh). Only stem slenderness had a significant association (0.41 ± 0.17) with stiffness. These findings suggest that, where stiffness is a priority, forest managers could reduce establishment costs with low stockings (around 1,250 stems/ha).

Genetic variation of wood tracheid traits and their relationships with growth and wood density in clones of <Emphasis Type="Italic">Pinus tabuliformis</Emphasis>

To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid traits by earlywood (EW) and latewood (LW): tracheid length (TL), double wall thickness (WT), radial lumen diameter (R_D1), tangential lumen diameter (T_D1), radial central diameter (R_D2), and tangential central diameter (T_D2). We also studied the relationship with the following growth traits: diameter at breast height (DBH), height (H), crown breadth south-north axis (NSC), crown breadth east–west axis (EWC), ring width (RW), latewood percentage (LWP), and wood density (WD). All sample materials were collected from a 33-year old clonal seed orchard of Pinus tabuliformis Carr. Genetic variation among clones was moderate for all tracheid traits, 9.49–26.03%. Clones significantly affected WT, R_D1, R_D2, T_D1, T_D2, and the two ratios WT/R_D1 and TL/T_D2 in EW but had no effects in LW. Clones significantly affected TL in LW but had no effects in EW. \( H\frac{2}{C} \) was higher in LW (0.50) than in EW (0.20) for TL, while \( H\frac{2}{C} \) was higher in EW (0.27–0.46) for other tracheid traits and the two ratios (TL/T_D2 and WT/R_D1) than in EW (0.06–0.22). WD and TL were significantly positively correlated, but WT and TL were negatively correlated both at individual and clone levels; all tracheid diameters and the four ratio values (EW_WT/R_D1, LW_WT/R_D1, EW_TL/T_D2 and LW_TL/T_D2), were strongly positively correlated with DBH, H, NSC, WEC and RW, and strongly negatively correlated with WD both at individual and clone levels. The most important variables for predicting WD were LW_TL, EW_WT and R_D1 in both EW and LW (r² = 0.22). Selecting the top 10% of the clones by DBH would improve DBH growth by 12.19% (wood density was reduced by 0.14%) and produced similar responses between EW and LW for all tracheid traits: a reduction of 0.94 and 3.69% in tracheid length and increases in tracheid diameters (from 0.36 to 5.24%) and double wall thickness (0.07 and 0.87%). The two ratios WT/R_D1 and TL/T_D2 across tissues (EW and LW) declined 0.59 and 4.56%, respectively. The decreased tracheid length and the ratio between tracheid length and diameter is disadvantageous for pulp production. The unfavorable relationship of tracheid traits with wood density indicate that multiple trait selection using optimal economic weights and optimal breeding strategies are recommended for the current long-term breeding program for P. tabuliformis.     

Chemical alterations induced by <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis>/<Emphasis Type="Italic">Aspergillus flavipes</Emphasis> co-cultures in wood from different tree species

Chemical alterations following inoculation of Acacia mearnsii, Eucalyptus dunnii, E. grandis, and E. macarthurii with a Pycnoporus sanguineus/Aspergillus flavipes co-culture were investigated. Several wood chemical parameters were measured using standard methods from the pulp and paper industry. The data were described and analyzed using univariate as well as multivariate statistical techniques. Boxplots and in particular biplots show clearly how the chemical composition of each tree species was differently affected by the co-culture. Lignin content was significantly decreased in A. mearnsii, while E. dunnii showed a decrease in cellulose content. The results, therefore, indicate that the manner in which wood is degraded by a specific fungal co-culture depends on the tree species involved. This phenomenon should be considered when selecting fungi for bio-pulping.     

Color variation and correlations in <Emphasis Type="Italic">Eucalyptus dunnii</Emphasis> sawnwood

A study of material thinned from a 9-year-old Eucalyptus dunnii progeny trial revealed that E. dunnii has light yellowish wood that is relatively uniform in color, and varies little within and between trees. The variation in color between half-sib families is small, but is statistically significant (P = 0.008). Most of the color variation relates to the yellowness (CIE b*) of the wood, which in heartwood is moderately heritable (h = 0.6). The color of the endgrain, especially its lightness (CIE L*) and whiteness index (E313), is correlated with basic density, hardness, and rates of shrinkage. The CIE rectangular opponent scale (L*, a*, b*) appeared to be the most informative about wood color and properties, and no additional information was gleaned from an analysis of full spectral data in the range 400–700 nm.     

Genetic variation in <Emphasis Type="Italic">Pinus taeda</Emphasis> wood properties predicted using non-destructive techniques

• Background   

Tree breeders have been reluctant to include wood traits in tree improvement programs owing to logistic difficulties and the cost associated with the assessing the traits.     

Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Reaction wood drying kinetics: tension wood in <Emphasis Type="Italic">Fagus sylvatica</Emphasis> and compression wood in <Emphasis Type="Italic">Picea abies</Emphasis>

The drying kinetics of reaction woods in Picea abies (compression wood) and Fagus sylvatica (tension wood) in comparison with their corresponding normal woods was investigated under constant convective drying conditions. Moisture profiles along the thickness of small flat-sawn boards taken from reaction and opposite wood zones were evaluated using a polychromatic X-ray system, a non-destructive method. The results revealed substantial differences in the drying behavior between the reaction and opposite woods. Both reaction woods represented slower drying rate than their matching normal woods mainly during the period of free water loss. However, the reaction and opposite woods reached the final moisture content (MC) of about 12% at the same time due to higher initial MC in the opposite woods. In the case of reaction wood, it took a longer time for the moisture profile to become approximately uniform. Overall, a more striking difference was observed in the drying behavior of compression and opposite wood in P. abies. Some important anatomical differences like the cell and pit dimensions and their proportion give some explanations for these drying behaviors.     

Inoculation with the ectomycorrhizal fungi <Emphasis Type="Italic">Pisolithus arhizus</Emphasis> and <Emphasis Type="Italic">Scleroderma</Emphasis> sp. improves early growth of <Emphasis Type="Italic">Shorea pinanga</Emphasis> nursery seedlings

Trees of the family Dipterocarpaceae are the dominant trees in Southeast Asian tropical forests where they play an important ecological role and are also important commercially. An experiment was conducted to determine the effect of ectomycorrhizal fungi on the growth of dipterocarp species in peat soils. Seedlings of Shorea pinanga were inoculated with spores of two ectomycorrhizal fungi, Pisolithus arhizus and Scleroderma sp. were grown in pots containing sterilized peat soil for 7 months. The percentage of ectomycorrhizal colonization on S. pinanga exceeded 86%. Colonization of S. pinanga roots by ectomycorrhizal fungi resulted in increased shoot height, stem diameter, number of leaves, and shoot fresh and dry weight. Survival rates of S. pinanga were greater for inoculated seedlings than control seedlings. These results suggest that inoculation of ectomycorrhizal fungi can improve the early growth of S. pinanga grown in tropical forests and that this technique will accelerate the rehabilitation of degraded dipterocarp forests.     

Enzymatic saccharification and ethanol production of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">Paraserianthes falcataria</Emphasis> wood,and <Emphasis Type="Italic">Elaeis guineensis</Emphasis> trunk

We examined the saccharification and fermentation of meals from Acacia mangium wood, Paraserianthes falcataria wood, and Elaeis guineensis trunk. The levels of enzymatic hydrolysis of cellulose and ethanol production were highest for P. falcataria wood and lowest for A. mangium wood. Ultrasonication pretreatment of meal further increased the rates of hydrolysis and ethanol production in meal from P. falcataria wood. Through this pretreatment, hemicelluloses (xylan and xyloglucan) and cellulose were released in the meal from P. falcataria wood. Loosening of hemicellulose associations can be expected to make P. falcataria wood more useful for bioethanol production.     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Fluorescein-labeled wheat germ agglutinin stains the pine wood nematode, <Emphasis Type="Italic">Bursaphelenchus </Emphasis><Emphasis Type="Italic">xylophilus</Emphasis>

Pine wilt disease, caused by the pine wood nematode (PWN, Bursaphelenchus xylophilus), is a major threat to pine forests throughout East Asia. Nonetheless, its mechanism of invasion has not yet been described in detail. To better understand the pathology of this disease, it is important to examine the distribution of PWNs within pine tissue during the course of disease development. We attempted to stain nematodes with fluorescein-conjugated wheat germ agglutinin (F-WGA) as a means to locate and track the spread of PWNs. Although PWNs proliferated on Botrytis cinerea fungus were successfully stained only on their vulvas and spicule holes, PWNs extracted from inoculated Pinus thunbergii seedlings were stained on their surface. Stainability, or the percentage of PWNs stained with F-WGA over more than half of their surface, was about 20% by 1 day after inoculation, but increased to 80% at 10 days. The stainability of PWNs extracted from a 5-cm main stem segment that included the inoculation site was less than that of PWNs extracted from other parts of the main stem farther away (i.e., those that had dispersed). These results suggest that stainability is related to dispersal activity in time. Thus, to raise the stainability of PWNs at shorter timeframes after inoculation, PWNs with more than 80% stainability were re-inoculated into pine seedlings. This resulted in more than 70% stainability from 1 to 6 days after inoculation. In F-WGA stained thin paraffin sections of pine tissue of re-inoculated seedlings, PWNs brightly fluoresced under epifluorescence and were easily detected against the dark background of pine tissue. This staining technique with F-WGA is an excellent tool for detecting PWNs in pine tissue.     

Fertiliser and irrigation effects on wood density at various heights for <Emphasis Type="Italic">Pinus radiata</Emphasis>

This study examined the combined effect of 19-years of nitrogen fertilisation and irrigation on the basic density along the stems of Pinus radiata (D.Don). The sample trees came from two treatments in the Biology of Forest Growth experiment: the control (C no treatment) and the irrigated and liquid fertilised (IL irrigated from age 10 to 29, liquid fertilised from ages 10 to 17). The mean basic density at breast height in the IL trees was significantly less (P < 0.05) than the C trees (430 and 471 kg m⁻³, respectively). However, the mean density of the entire bole was not significantly different. Basic density decreased with height, with the density near the tips of the trees being only 80% of the density at breast height for both treatments. The relative rate of the decrease was different between treatments. The density of the C trees decreased steadily with height while the IL trees held a relatively constant density for about half their total height. The results show the importance sampling at several different heights when considering the effects of various treatments on wood basic density in Pinus radiata.     

Micropropagation of <Emphasis Type="Italic">Salvadora</Emphasis><Emphasis Type="Italic">persica</Emphasis>-a tree of arid horticulture and forestry

A micropropagation method for Jaal (Salvadora persica)—a tree of arid horticulture and forestry has been developed. Nodal segments of fresh shoot sprouts originated from axillary buds obtained from a plant around 35–40 years old lopped plant were used as explants for establishment of in vitro cultures. Surface-sterilized explants produced optimum number of shoots through activation of axillary buds on Murashige and Skoog’s (MS) medium containing 8.88 μM BA (6-benzyladenine) + additives (25 mgl⁻¹ each of adenine sulphate, arginine, citric acid, 50 mgl⁻¹ ascorbic acid). The shoot multiplication was influenced by the successive transfer of the mother explants for 4–5 passages. The maximum number (23.1 ± 0.73 shoots per explant) of shoots were regenerated on MS supplemented with 1.11 μM BA + 1.16 μM Kn (Kinetin) + 0.54 μM NAA (α-naphthalene acetic acid). About 90% shoots pulse-treated with a combination of 2460.27 μM Indole-3-butyric acid (IBA) + 494.56 μM NOA (2-naphthoxy acetic acid) were rooted ex vitro on soilrite within 15–18 days. Over 80% cloned plantlets were hardened successfully in a green house and transferred to polybag/pots.