Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Radial variations of wood properties of an endangered species, <Emphasis Type="Italic">Pinus armandii</Emphasis> var. <Emphasis Type="Italic">amamiana</Emphasis>

A dead tree of Pinus armandii Franch. var. amamiana (Koidz.) Hatusima (abbreviated to PAAm) was obtained from a natural habitat on Tanega-shima Island and various properties of its wood were investigated. Grain angle was measured and soft X-ray analysis was undertaken to obtain the density in each annual ring. Unit shrinkage and dynamic properties were measured by shrinkage, bending, and compression tests. Variations of wood properties in the radial direction, relationships of wood properties to density, and annual ring width were examined. Roughly speaking, variations in the radial direction of the grain angle, twist angle by drying, Young’s modulus and strength in static bending, absorbed energy in impact bending, compressive Young’s modulus, compressive strength, and compressive proportional limit corresponded to the variation of annual ring width. As a result, it was determined that if PAAm is afforested artificially for the purposes of lumber production and conservation, the annual rings of logs should not be too widely spaced. Wood properties of PAAm were similar to those of Japanese black pine (Pinus thunbergii Parl.), which is another representative pine on Tanegashima Island. This study was presented in part at the 56th Annual Meeting of the Japan Wood Research Society, Hiroshima, August 2007     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Changes of chemical composition and crystalline of compressed Chinese fir wood in heating fixation

The changes in relative crystalline, chemical composition and internal structure of compressed Chinese fir wood after different heating fixations were found strictly related to fixation conditions. The compressed wood powders were fixed either by heating at different temperatures all resulting in a 10% recovery, or by incubating at 180℃ for different periods with subsequent recovery levels. Both X-ray diffraction and infrared absorption of those samples have been measured. Relative crystalline increases at early stage of heating fixation, and then decreased gradually. Hemicellulose and lignin decomposition were induced by the fixation process, especially at 180℃, and lignin was degraded actively. Furthermore, absorbed water was lost after heating, but cellulose did not change markedly. Although different fixation pathways can result in the same recovery level, the major chemical reactions underlying them vary, which is consistent with the difference of fixation mechanisms.     

Early establishment of broadleaved trees after logging of <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> and <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> plantations with different understory treatments

We studied the effects of the amount of advanced regeneration before logging and different understory treatments on forest recovery, particularly the establishment of lucidophyllous (evergreen broadleaved) species, following the logging of conifer plantation with a focus on the sprouting ability. The establishment of lucidophyllous tree and shrub species originating from advanced regeneration was closely related to the total amount of these elements in the advanced regeneration, regardless of understory treatment. The understory-left treatment could preserve understory as surviving individuals by high proportion (60% or more of the understory) compared with the understory-cleared practice after logging. However, half of the surviving individuals were damaged to some extent by logging and skidding. Relatively large trees were likely to survive with no damage, indicating that they face a lower risk than smaller trees. In understory-cleared stands, a high proportion (60% or more) of the understory regenerated by resprouting. However, the resprouting ratio depended on tree size and species. Therefore, as well as the amount of the understory, the tree size of understory before logging would be also an important factor for early forest recovery. Further, the infrequent (low-density) species could easily disappear after logging because of their low resprouting ratio and low density. Thus, recovery from resprouting alone would risk simplification of the species composition after logging. We concluded that leaving the developed understory intact before logging can enhance the speed and biodiversity of forest recovery.     

Enzymatic saccharification and ethanol production of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">Paraserianthes falcataria</Emphasis> wood,and <Emphasis Type="Italic">Elaeis guineensis</Emphasis> trunk

We examined the saccharification and fermentation of meals from Acacia mangium wood, Paraserianthes falcataria wood, and Elaeis guineensis trunk. The levels of enzymatic hydrolysis of cellulose and ethanol production were highest for P. falcataria wood and lowest for A. mangium wood. Ultrasonication pretreatment of meal further increased the rates of hydrolysis and ethanol production in meal from P. falcataria wood. Through this pretreatment, hemicelluloses (xylan and xyloglucan) and cellulose were released in the meal from P. falcataria wood. Loosening of hemicellulose associations can be expected to make P. falcataria wood more useful for bioethanol production.     

Comparison of mechanical properties of tension and opposite wood in <Emphasis Type="Italic">Populus</Emphasis>

In this paper we focused on the differences of mechanical properties of tension and normal wood of 1-year-old poplar trees, artificially tilted. Elastic and fracture properties have been measured and linked to the anatomy. Tension wood is well known because it prevents good surface finishing and leads to difficulties with sawing. We studied three main mechanical properties: young modulus, energy of cutting and longitudinal residual strain of maturation (with strain gauges) because of their importance in wood technology. Moreover, this work takes place in a larger project of study, the phenomena of axes re-orientation in trees (allowing by the production of reaction wood), where these data are required for biomechanical modelling. The results show that tension wood has a higher young modulus, needs a higher energy to be cut and exhibited a higher level of longitudinal residual strain of maturation than those of normal wood. The results suggest that these differences require deeper analysis of the wood than anatomy: measurement of microfibril orientation in the S2 layer and also the lignin composition in monomeric units.     

Insecticidal properties of <Emphasis Type="Italic">Thymus persicus</Emphasis> essential oil against <Emphasis Type="Italic">Tribolium castaneum</Emphasis> and <Emphasis Type="Italic">Sitophilus oryzae</Emphasis>

Red flour beetle Tribolium castaneum (Herbst) and rice weevil Sitophilus oryzae (L.) are considered to be the major insect pests in storage. Essential oils from aromatic plants are recognized as proper alternatives to fumigants. Thymus persicus (Ronniger ex Rech. f.) is one of these plants that have medicinal properties and is indigenous to Iran. The essential oil was obtained from aerial parts of the plant and analyzed by GC and GC–MS. Carvacrol (44.69%) and thymol (11.05%) were the major constituents of the oil extracted. In this experiment, fumigant toxicity of the essential oil was studied against T. castaneum, S. oryzae at 27 ± 1°C and 60 ± 5% RH in dark condition. The adult insects were exposed to the concentrations of 51.9, 111.1, 207.4 and 370.4 μl/l air to estimate median lethal time (LT₅₀) values. The fumigant toxicity was increased in response to increased essential oil concentrations. The LT₅₀ values at the lowest and the highest concentrations tested were ranged from 28.09 to 13.47 h for T. castaneum, and 3.86 to 2.30 h for S. oryzae. It was found that S. oryzae adults were much more susceptible to the oil than T. castaneum. After 24 h of exposure, the LC₅₀ values (95% fiducial limit) for T. castaneum and S. oryzae were estimated to be 236.9 (186.27–292.81) and 3.34 (2.62–4.28) μl/l air, respectively. These results suggest that T. persicus essential oil merits further study as potential fumigant for the management of these stored-product insects.     

Fluorescein-labeled wheat germ agglutinin stains the pine wood nematode, <Emphasis Type="Italic">Bursaphelenchus </Emphasis><Emphasis Type="Italic">xylophilus</Emphasis>

Pine wilt disease, caused by the pine wood nematode (PWN, Bursaphelenchus xylophilus), is a major threat to pine forests throughout East Asia. Nonetheless, its mechanism of invasion has not yet been described in detail. To better understand the pathology of this disease, it is important to examine the distribution of PWNs within pine tissue during the course of disease development. We attempted to stain nematodes with fluorescein-conjugated wheat germ agglutinin (F-WGA) as a means to locate and track the spread of PWNs. Although PWNs proliferated on Botrytis cinerea fungus were successfully stained only on their vulvas and spicule holes, PWNs extracted from inoculated Pinus thunbergii seedlings were stained on their surface. Stainability, or the percentage of PWNs stained with F-WGA over more than half of their surface, was about 20% by 1 day after inoculation, but increased to 80% at 10 days. The stainability of PWNs extracted from a 5-cm main stem segment that included the inoculation site was less than that of PWNs extracted from other parts of the main stem farther away (i.e., those that had dispersed). These results suggest that stainability is related to dispersal activity in time. Thus, to raise the stainability of PWNs at shorter timeframes after inoculation, PWNs with more than 80% stainability were re-inoculated into pine seedlings. This resulted in more than 70% stainability from 1 to 6 days after inoculation. In F-WGA stained thin paraffin sections of pine tissue of re-inoculated seedlings, PWNs brightly fluoresced under epifluorescence and were easily detected against the dark background of pine tissue. This staining technique with F-WGA is an excellent tool for detecting PWNs in pine tissue.     

Feeding performance of <Emphasis Type="Italic">Clostera fulgurita</Emphasis> on three clones of <Emphasis Type="Italic">Populus deltoides</Emphasis>

Poplar leaf defoliator, Clostera fulgurita (Walker) larvae were reared on three Populus deltoides clones (PL1, PL5 and PL7) in the laboratory. The nutritional indices were computed for working out the relationship between food consumption and growth rate of 3rd, 4th and 5th instar larvae on three clones. The result showed that the consumption index (CI), approximate digestibility (AD), growth rate (GR), relative growth rate (RGR) and efficiency of conversion of ingested food (ECI) decreased with the increase in the age of the larvae. Efficiency of conversion of digested food (ECD) increased with increase in age of the larvae. GR and RGR varied significantly, indicating that larval development was enhanced on PL1 as compared to PL5 & PL7. The values of AD, ECI and ECD were not affected by the different clones. Feeding and growth indices could be useful to define a defoliation prediction model.     

Reaction wood drying kinetics: tension wood in <Emphasis Type="Italic">Fagus sylvatica</Emphasis> and compression wood in <Emphasis Type="Italic">Picea abies</Emphasis>

The drying kinetics of reaction woods in Picea abies (compression wood) and Fagus sylvatica (tension wood) in comparison with their corresponding normal woods was investigated under constant convective drying conditions. Moisture profiles along the thickness of small flat-sawn boards taken from reaction and opposite wood zones were evaluated using a polychromatic X-ray system, a non-destructive method. The results revealed substantial differences in the drying behavior between the reaction and opposite woods. Both reaction woods represented slower drying rate than their matching normal woods mainly during the period of free water loss. However, the reaction and opposite woods reached the final moisture content (MC) of about 12% at the same time due to higher initial MC in the opposite woods. In the case of reaction wood, it took a longer time for the moisture profile to become approximately uniform. Overall, a more striking difference was observed in the drying behavior of compression and opposite wood in P. abies. Some important anatomical differences like the cell and pit dimensions and their proportion give some explanations for these drying behaviors.     

High level expression of glucose-6-phosphate dehydrogenase gene <Emphasis Type="Italic">PsG6PDH</Emphasis> from <Emphasis Type="Italic">Populus suaveolens</Emphasis> in <Emphasis Type="Italic">E. coli</Emphasis>

In order to investigate the functions of the gene PsG6PDH and the mechanisms underlying freezing tolerance of Populus suaveolens, the recombinant expression vector pET-G (pET30a-G6PDH), which contained full encoding region of PsG6PDH gene, was established. The recombinant was identified by lawn-PCR and double enzyme digestion and then transformed into expression host XA90 and induced by isopropyl-â-D-thiogalactoside (IPTG) to express 100 kD polypeptide of G6PDH fusion protein. The results showed that the expressed amount of the fusion protein culminated after 1 mmol&#8226;L^–1 IPTG treatment for 4 h and that pET-G product was predominately soluble and not extra-cellular secreting.     

Pilodyn在桉树活立木材性质评估中的应用

测定了建立在广西22个4年生桉树无性系的Pilodyn值、木材基本密度、边材木材密度、心材木材密度和弹性模量。结果表明：Pilodyn值为9．44—15．41mm、木材密度为0．3514-0．4913g&#183;cm^-3、弹性模量在3．94GPa到7．53GPa之间;Pilodyn值在不同处理、不同方向及不同参试无性系间均存在极显著差异。Pilodyn值与各材性指标间的相关系数在-0．433到-0．755之间,呈显著到极显著负相关。研究表明,Pilodyn方法可以预测桉树活立木的木材密度和弹性模量。     

Chemical alterations induced by <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis>/<Emphasis Type="Italic">Aspergillus flavipes</Emphasis> co-cultures in wood from different tree species

Chemical alterations following inoculation of Acacia mearnsii, Eucalyptus dunnii, E. grandis, and E. macarthurii with a Pycnoporus sanguineus/Aspergillus flavipes co-culture were investigated. Several wood chemical parameters were measured using standard methods from the pulp and paper industry. The data were described and analyzed using univariate as well as multivariate statistical techniques. Boxplots and in particular biplots show clearly how the chemical composition of each tree species was differently affected by the co-culture. Lignin content was significantly decreased in A. mearnsii, while E. dunnii showed a decrease in cellulose content. The results, therefore, indicate that the manner in which wood is degraded by a specific fungal co-culture depends on the tree species involved. This phenomenon should be considered when selecting fungi for bio-pulping.     

Leaf-level responses to light in two co-occurring <Emphasis Type="Italic">Quercus</Emphasis> (<Emphasis Type="Italic">Quercus ilex</Emphasis> and <Emphasis Type="Italic">Quercus suber</Emphasis>): leaf structure,chemical composition and photosynthesis

We studied morphological, biochemical and physiological leaf acclimation to incident Photon-Photosynthetic-Flux-Density (PPFD) in Quercus ilex (holm oak) and Quercus suber (cork oak) at Mediterranean evergreen oak woodlands of southern Portugal. Specific leaf area (SLA) decreased exponentially with increasing PPFD in both species. Q. ilex had lower SLA values than Q. suber. Leaf nitrogen, cellulose and lignin concentration (leaf area-based) scaled positively with PPFD. Maximum rate of carboxylation (V_cmax), capacity for maximum photosynthetic electron transport (J_max), rate of triose-P utilization (V_TPU) and the rate of nonphotorespiratory light respiration (Rd) were also positively correlated with PPFD in both Quercus species, when expressed in leaf area but not on leaf mass basis. Q suber showed to have higher photosynthetic potential (V_cmax, J_max^m and V_TPU^m) and a higher nitrogen efficient nitrogen use than Q.ilex. Leaf chlorophyll concentration increased with decreasing PPFD, improving apparent quantum use efficiency (Φ) in both Quercus species. We concluded that, in Q.ilex and Q.suber, leaf structural plasticity is a stronger determinant for leaf acclimation to PPFD than biochemical and physiological plasticity.     

Experimental study on characteristic curves of restoring forces of <Emphasis Type="Italic">Populus alba</Emphasis> var. <Emphasis Type="Italic">pyramidalis</Emphasis>

Static tests under cyclic loading were carried out on Populus alba var. pyramidalis to determine its characteristic curves of     

Effect of thermo-hydro-mechanical densification on microstructure and properties of poplar wood (<Emphasis Type="Italic">Populus tomentosa</Emphasis>)

This study aimed at developing a thermo-hydro-mechanical (THM) processing to compress poplar wood and investigating the effects of high temperature, moisture, and pressure during the THM processing on the changes in microstructure, porosity, mechanical properties, and dimensional stability of compressed poplar wood. The variations in these properties were correlated and their mathematical relations were determined. Poplar woods with high moisture content were compressed using different pressures at a temperature of 160 °C for different periods. The compression level was characterized by the volume compression ratio (CR), which is defined as the ratio of the compression volume and the original volume of sample before and after THM processing. The obtained results indicated that the high pressure of THM process caused the collapsing of wood cell lumens and the developing of a certain amount of fractures in the cell wall. The damage level of wood cells increased with increasing pressure and time. Moreover, the pressure narrowed the cell lumens, which decreased significantly the pore volume in wood substrate. The pore size distribution shifted from the level of macropores to those of mesopores and micropores after THM process. The THM process created superior mechanical property, especially for those with higher CR. Besides, it was revealed that the process decreased dramatically the set recovery of treated woods and improved their dimensional stability. A significant improvement was achieved in terms of the mechanical and physical properties of compressed poplar wood via the structural reformation during the THM process.     

Cloning and sequence analysis of a glucose-6-phosphate dehydrogenase gene <Emphasis Type="Italic">PsG6PDH</Emphasis> from freezing-tolerant <Emphasis Type="Italic">Populus suaveolens</Emphasis>

A 1207 bp cDNA fragment (PsG6PDH) was amplified by RT-PCR from cold-induced total RNA of the freezing-tolerant P. Suaveolens, using primers based on the highly conserved region of published plant glucose-6-phosphate dehydrogenase (G6PDH) genes. The sequence analysis showed that PsG6PDH coding region had 1 101 bp and encoded 367 predicted amino acid residues. Moreover, the nucleotide sequence of PsG6PDH showed 83%, 82%, 79%, 79% and 78% identity, and the derived amino acid sequence shared 44.2%, 44.7%, 42.0%, 40.5% and 43.9% identity with those of the Solanum tuberosum, Nicotiana tabacum, Triticum aestivum, Oryza sativa and Arabidopsis thaliana, respectively. The results show that PsG6PDH is a new member of G6PDH gene family and belongs to the cytosolic G6PDH gene. This is the first report on cloning of the G6PDH gene from woody plants.     

<Emphasis Type="Italic">Bursaphelenchus mucronatus</Emphasis> (Nematoda: Aphelenchoididae) vectored by <Emphasis Type="Italic">Monochamus </Emphasis><Emphasis Type="Italic">urussovi</Emphasis> (Coleoptera: Cerambycidae) in Hokkaido,Japan

Bursaphelenchus mucronatus Mamiya et Enda has been recovered for the first time from adults of the cerambycid beetle, Monochamus urussovi (Fischer), in Hokkaido, Japan. The nematode was also recovered from the inner bark of Picea jezoensis (Siebold et Zuccarini) Carrière and Abies sachalinensis (Fr Schmidt) Masters infested with M. urussovi larvae. PCR–RFLP analysis indicated that B. mucronatus in Hokkaido is the European type.     

Genetic and environmental variation in wood properties of <Emphasis Type="Italic">Acacia melanoxylon</Emphasis>

Context  

Australian blackwood (Acacia melanoxylon), is a fast-growing, high-quality, appearance-grade timber species native to eastern Australia. Some of its key wood properties are percentage heartwood, heartwood colour, basic density, wood stiffness and green moisture content. Variation in these properties affects log value, processing and marketing.