Compressive and flexural properties of hemp fiber reinforced concrete

The compressive and flexural properties of hemp fiber reinforced concretes (FRC) were examined in this paper. Natural hemp fiber was mixed using dry and wet mixing methods to fabricate the FRC. Mechanical properties of the FRC were investigated. The main factors affecting compressive and flexural properties of the FRC materials were evaluated with an orthogonal test design. Fiber content by weight has the largest effect. The method for casting hemp FRC has been optimised. Under the optimum conditions, compressive strength increased by 4 %, flexural strength increased by 9 %, flexural toughness increased by 144 %, and flexural toughness index increased by 214 %.     

Mechanical and physical properties of expanded starch, reinforced by natural fibres

Biodegradable foams made from potato starch and natural fibres were obtained by extrusion. The effects of varying origins of these fibres on foam properties were studied, as well the relationships between their properties and the foam microstructure. The addition of fibres increased the expansion index and led to a significant reduction in water adsorption of starch foams, generally improving foam properties. The mechanical properties of the foams were affected by both relative humidity (RH) of storage and foam formulation. In general, as the RH increased, the foam strength decreased. The formulation presenting the best mechanical properties contained 10 wt% hemp fibre and had a maximal resistance of 4.14 MPa and a modulus of 228 MPa, corresponding to a more compact and dense microstructure.     

Mechanical and thermal properties of recycled poly(ethylene terephthalate) reinforced newspaper fiber composites

This study presents the mechanical and thermal properties of environment-friendly composites made from recycled newspaper fibers reinforced recycled poly(ethylene terephthalate) (rPET) resin with the addition of styrene-ethylene-butylene-styrene grafted maleic anhydride (SEBS-g-MA) as compatibilizer. The effect of SEBS-g-MA addition (i.e., 10 phr) by using a twin-screw extruder to the rPET resin, followed by different fiber content (5, 10 and 15 wt.%) on the tensile, flexural and impact properties of the composites were determined. Stiffness of composites increased significantly compared to those of rPET/SEBS-g-MA blend. Fiber addition resulted in moderate increases in both tensile and flexural strength of the composites. Scanning electron microscope (SEM) photomicrographs of the impact fracture surfaces demonstrate good adhesion at 5 and 10 % fiber content. Differential scanning calorimetry (DSC) showed that the presence of newspaper fibers enhanced the nonisothermal crystallization kinetics and crystallinity. Thermal stability of the composites was improved as indicated by thermogravimetric analysis (TGA).     

Flexural characteristics of coir fiber reinforced cementitious composites

This study has examined the flexural properties of natural and chemically modified coir fiber reinforced cementitious composites (CFRCC). Coir fibers of two different average lengths were used, and the longer coir fibers were also treated with a 1 % NaOH solution for comparison. The fibers were combined with cementitious materials and chemical agents (dispersant, defoamer or wetting agent) to form CFRCC. The flexural properties of the composites, including elastic stress, flexural strength, toughness and toughness index, were measured. The effects of fiber treatments, addition of chemical agents and accelerated ageing of composites on the composites’ flexural properties were examined. The results showed that the CFRCC samples were 5–12 % lighter than the conventional mortar, and that the addition of coir fibers improved the flexural strength of the CFRCC materials. Toughness and toughness index, which were associated with the work of fracture, were increased more than ten times. For the alkalized long coir fiber composites, a higher immediate and long-term toughness index was achieved. SEM microstructure images revealed improved physicochemical bonding in the treated CFRCC.     

Improvement of mechanical and electrical properties of poly(ethylene glycol) and cyanoresin based polymer electrolytes

Ionic conductivity and mechanical properties of a mixed polymer matrix consisting of poly(ethylene glycol) (PEG) and cyanoresin type M (CRM) with various lithium salts and plasticizer were examined. The CRM used was a copolymer of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) with a molar ratio of 1:1, mixed plasticizer was ethylene carbonate (EC) and propylene carbonate (PC) at a volume ratio of 1:1. The conductive behavior of polymer electrolytes in the temperature range of 298∼338 K was investigated. The PEG/LiClO₄ complexes exhibited the highest ionic conductivity of ∼10⁻⁵ S/cm at 25°C with the salt concentration of 1.5 M. In addition, the plasticized PEG/LiClO₄ complexes exhibited improvement of ionic conductivity. However, their complexes showed decreased mechanical properties. The improvement of ionic conductivity and mechanical properties could be obtained from the polymer electrolytes by using CRM. The highest ionic conductivity of PEG/CRM/LiClO₄/(EC-PC) was 5.33×10⁻⁴ S/cm at 25°C.     

The effect of molecular weight and the linear velocity of drum surface on the properties of electrospun poly(ethylene terephthalate) nonwovens

In this study, we evaluated the effect of the molecular weight of the polymer on electrospun poly(ethylene terephthalate) (PET) nonwovens, and their mechanical properties as a function of the linear velocity of drum surface. Polymer solutions and electrospun PET nonwovens were characterized by means of viscometer, tensiometer, scanning electron microscope (SEM), wide angle X-ray diffraction measurement (WAXD) and universal testing machine (UTM). By keeping the uniform solution viscosity, regardless of molecular weight differences, electrospun PET nonwovens with similar average diameter could be obtained. In addition, the mechanical properties of the electrospun PET nonwovens were strongly dependent on the linear velocity of drum surface. From the results of the WAXD scan, it was found that the polymer took on a particular molecular orientation when the linear velocity of drum surface was increased. The peaks became more definite and apparent, evolving from an amorphous pattern at 0 m/min to peaks and signifying the presence of crystallinity at 45 m/min.     

Mechanical properties of denim fabric reinforced poly(lactic acid)

Denim, a twilled cotton fabric, was used to enhance the mechanical and thermal properties of poly(lactic acid) (PLA). The denim fabric reinforced composites with different numbers of denim layers were fabricated by using a hand layup method. The impact, tensile, and dynamic mechanical properties of the composites were observed with increasing denim layers to examine the reinforcing effect of denim fabrics. Numerical analysis was carried out to model the elastic modulus of the composite by using a commercial software. Three-dimensional geometry of the denim fabric reinforced PLA composite was generated through a CAD program, and the elastic modulus was calculated by applying uniform deformation on one surface. The impact strength, tensile strength, and thermal properties of the composites were improved by piling denim fabrics. The denim fabric reinforced composites exhibited outstanding impact strength due to the retarded crack propagation as well as large energy dissipation. The 3 layer denim reinforced composite showed best results among all specimens, and its impact strength, tensile strength, and tensile modulus were measured to be 82 J/m, 75.76 MPa, and 4.65 GPa, respectively. The PLA/denim composites have good mechanical properties and can substitute traditional composites such as glass fiber or carbon fiber reinforced composites.     

Mechanical properties of semi-interpenetrating polymer network hydrogels based on poly(2-hydroxyethyl methacrylate) copolymer and chitosan

Semi-interpenetrating polymeric network (semi-IPN) hydrogels based on poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(2-hydroxyethyl methacrylate-co-sodium methacrylate) [P(HEMA-co-SMA)], and chitosan with different molecular weights were prepared by crosslinking with ethylene glycol dimethacrylate (EGDMA) and poly(ethylene glycol) diacrylate (PEGDA) and their gelation time, water content, mechanical properties, and morphology were investigated. In consideration of the influence of the molecular weight of chitosan, there is no big difference in the water content, while tensile properties and compressive modulus increased as the molecular weight of chitosan increased. The water content increased and tensile properties and compressive modulus decreased with increasing SMA concentration. Considering the effect of the crosslinking agent, PEGDA had higher water content and lower tensile and compressive moduli than EGDMA. It is suggested that PHEMA/chitosan and P(HEMA-co-SMA)/chitosan semi-IPN hydrogels with different structures and physical properties can be prepared depending on the molecular weight of chitosan, the copolymerization with SMA, and the crosslinking agent type.     

Study on the mechanism of microwave modified wheat protein fiber to improve its mechanical properties

Wheat protein is widely used in food industry. In order to expand the scope of its application on non-food field, we managed to apply the wheat protein to fiber production. To improve the mechanical properties of the fibers, we used the method of microwave modification. The best process conditions obtained by response surface analysis were a microwave power of 20.6 W/mL, microwave time of 3 min, and pH 8. Compared to non-microwaved fibers, the breaking strength was 19% higher and the elongation was 302.43% higher which indicated the microwaved fiber toughness was increased. To study the mechanism underlying the effect of microwave treatment on the improvement of mechanical properties, changes in the SH and SS content during wheat protein fiber preparation, a secondary structure study, X-ray diffraction, thermal performance analysis, SEM, surface hydrophobicity, and standard moisture regain measurement were examined. The microwaved fiber had increased SS content, α-helices, crystallinity, which may be responsible for the better mechanical properties. DSC and TG results showed that the thermal stability of microwaved fiber was increased. Additionally, SEM micrographs revealed that the structure of microwaved fibers was smoother and denser, and contained less pores than non-microwaved fibers. Although the surface hydrophobicity and standard moisture regain were decreased, microwaved fiber had good hygroscopicity, which was close to that of silk.     

Mechanical and thermal degradation behavior of sisal fiber (SF) reinforced recycled polypropylene (RPP) composites

The present investigation focuses on the effect of fiber surface treatment on the mechanical, thermal and morphological properties of sisal fiber (SF) reinforced recycled polypropylene (RPP) composites. The surface of sisal fiber was modified using different chemicals such as silane, glycidyl methacrylate (GMA) and O-hydroxybenzene diazonium chloride (OBDC) to improve the compatibility between fiber surface and polymer matrix. The experimental results revealed an improvement in the tensile strength to 11 %, 20 % and 31.36 % and impact strength to 78.72 %, 77 % and 81 % for silane, GMA and OBDC treated sisal fiber reinforced recycled polypropylene (RPP/SF) composites respectively as compared to RPP. The thermo gravimetric analysis (TGA), Differential scanning calorimeter (DSC) and heat deflection temperature (HDT) results revealed improved thermal stability as compared with RPP. The morphological analysis through scanning electron micrograph (SEM) supports improves surface interaction between fiber surface and polymer matrix.     

Mechanical and rheological properties of calcium carbonate-filled ethylene propylene diene elastomer reinforced by metallic acrylate salt

High performance ethylene propylene diene methylene elastomer (EPDM)/calcium carbonate (CaCO₃)/aluminum triacrylate (ALTA) hybrids have been prepared by a melt compounding process. The mechanical properties of the peroxide cured EPDM/CaCO₃/ALTA vulcanizates were investigated by tensile, hardness, resilience, abrasion and fatigue life tests. The results showed that the ALTA can greatly improve the modulus at 100 %, tensile strength, abrasion resistance and fatigue life of the EPDM/CaCO₃/ALTA vulcanizates, while retaining their high elongation at break. ALTA as a reactive filler had accelerating effect on the vulcanization reaction of and increased the crosslink density of the EPDM/CaCO₃ composites. This phenomenon is due to increasing the ionic bonds arise from both homo-polymerization of ALTA and graft co-polymerization of it onto the EPDM. Scanning electron microscopy (SEM) revealed the presence of ALTA causes to the roughness of the fracture surface of CaCO₃-filled EPDM compounds demonstrating high interaction between the fillers and EPDM improved by introduction of ALTA. Dynamic mechanical analysis revealed that the glass transition temperature (T _g ) and dissipation peak (tan δ) of EPDM composites decreases with increasing ALTA content. Decrease in tan δ value and inward shifting of T _g were related to improved interaction of filler and EPDM.     

The statistical investigation of mechanical properties of PP/natural fibers composites

A systematic and statistical approach to evaluate and predict the properties of random discontinuous natural fiber reinforced composites. Different composites based on polypropylene and reinforced with natural fibers have been made and their mechanical properties are measured together with the distribution of the fiber size and the fiber diameter. The values obtained have been related to the theoretical predictions, using a combination of the Griffith theory for the effective properties of the natural fibers and the Halpin-Tsai equation for the elastic modulus of the composites. The relationships between experimental results and theoretical predictions are statistically analyzed using a probability density function estimation approach based on neural networks. The results show a more accurate expected value with respect to the traditional statistical function estimation approach. In order to point out the particular features of natural fibers, the same proposed method is also applied to PP-glass fiber composites.     

Mechanical properties and water absorption of short snake grass fiber reinforced isophthallic polyester composites

Natural fiber composite replaces the conventional and synthetic materials in many fields especially in light weight applications. The randomly oriented short snake grass fiber reinforced isophthallic polyester composites are prepared by hand lay-up technique and finally compression molded. The various length and weight fraction of fiber are used in composite fabrication. The mechanical properties and water absorption under various climatic conditions are examined according to the prescribed standard. SEM image revealing the fiber pullout and breakage of the tensile and impact fractured composite specimens has been analysed and compared with control through scanning electron microscope. The result shows that the mechanical properties increase with increase in fiber length and weight fraction of the composites. The rate of water absorption increases with increase in temperature and time. Obtained experimental tensile strength of the composite is compared with various theoretical models such as Series, Hirsch’s, Halpin-Tsai, Modified Halpin-Tsai and Modified Bowyer & Brader’s and the obtained inferences are discussed.     

Basic properties of grain by-products and their viability in polypropylene composites

The objective was to study the potential of grain by-products (husk) of grains such as wheat (Triticum aestivum L; German name is Weizen) and rice (Oryza sativa) as reinforcements for thermoplastics as an alternative to or in combination with wood fibres. Prior to composites preparation, the chemical components of fibres such as cellulose, hemi-cellulose, lignin, starch, protein and fat were measured and the surface chemistry and functionality of grain by-products were studied using EDX and FT-IR. Structural constituents (cellulose, starch) were found in wheat husk (W) equal 42%, in rice husk 50% and in soft wood 42%, respectively. Thermal degradation characteristics, the bulk density, water absorption and the solubility index were also investigated. Wheat husk (W) and rice husk were found thermally stable at temperatures as low as 178 °C and 208 °C, respectively. The particle morphology and particle size were investigated using microscopy. Water absorption properties of the fibres were studied to evaluate the viability of these fibres as reinforcements. Polypropylene composites were fabricated using a high speed mixer and an ensuing injection moulding process with 40 wt% fibre. The tensile and Charpy impact strength of the resulting composites were investigated. The tensile elongation at break was found to 75% for wheat husk (W) composites and 23% for rice husk composites better than soft wood composites. Rice husk composites showed 13% better Charpy impact strength than soft wood composites. Due to coupling agent, tensile strength of composites found to improve 25% for soft wood, 35% for wheat husk (W) and 45% for rice husk.     

Preparation and properties of pineapple leaf fiber reinforced poly(lactic acid) green composites

Green composites from Pattawia pineapple leaf fiber (PALF) and poly(lactic acid) (PLA) were prepared. The mechanical method was chosen to extract PALF from fresh leaves due to this method gave high yield of fiber, short extraction time, and environmental friendly. Tensile and thermal properties, together with morphology of the fibers were disclosed. The fibers were conducted into a specified length of 1–3 mm and blended with PLA, using a twin screw extruder, with the PALF content of 10–50 wt%. Tensile testing, morphology investigation and thermogravimetric analysis were applied. Preliminary results showed that tensile modulus of the composites depended on PALF content. The tensile modulus and elongation at break of the composite containing 40 % PALF was about 48 %, and 111 % increase, respectively, compared with that of PLA. With addition of maleic anhydride coupling agent, such the composite showed the tensile modulus of 5.1 GPa, which was 34 % higher than that of the non-coupling agent composite, and about 104 % higher than that of PLA. Although the elongation at break of the composite containing 40 % PALF was found to dramatically increase by 111 %, the introduction of maleic anhydride in such the composite caused only 57 % increase in the elongation at break compared with that of PLA. Finally, a pilot product of square boxes was produced successfully from the proposed composite, by conventional injection molding process.     

Nano-SiO2 filled rice husk/polypropylene composites: Physico-mechanical properties

In this research, reinforcing effect of hybrid filler including rice husk (RH), beech bark (BB) and nano-SiO₂, in polypropylene has been investigated. In the sample preparation, four levels of filler loading were used for waste lignocellulosic materials (55-58 wt.%) and nano-SiO₂ (0-4 wt.%). In order to increase the interphase adhesion, polypropylene grafted with maleic anhydride was added as a coupling agent to all the composites studied. The physical properties, viz. the thickness swelling and water absorption, and mechanical properties, namely, the tensile, flexural and notched Izod impact strengths, of the composites were determined. Generally, high amount of filler content in composites can lead to the reduction of interfacial adhesion between matrix polymer and filler, and it limits their applications. The results showed that while flexural properties and elongation at break were moderately improved by the increase in the amount of filler in the matrix, tensile and Izod impact strengths decreased dramatically. However, the composites had acceptable mechanical strength levels. The mechanical properties of composites filled with RH are generally greater than BB composites. The thickness swelling and water absorption of the composites increased with the increase in the filler loading, but to a negligible extent as compared with the wood-based composites and the solid woods. Nano-SiO₂ addition showed little positive effect on the mechanical properties. It can be concluded from this study that the used waste lignocellulosic materials are attractive reinforcements from the standpoint of their physico-mechanical properties.     

Mechanical properties of outer layers from near-isogenic lines of common wheat differing in hardness

The mechanical properties of the combined outer layers from near-isogenic wheats differing by hardness were determined. Results from traction tests showed significant differences between the isogenic lines, outer layers from grains of the soft type showing higher extensibility. Determination of the mechanical properties of the corresponding component tissues revealed significant differences between the isolated tissues from soft or hard wheat grains. It also allowed analysis of their respective contribution to the properties of the combined peripheral tissues using a simulation of their rupture as unseparated tissues. According to the results, if the component layers displayed similar maximum lineic force to rupture, the rupture of combined outer layers occurs when the least extensible individual tissue breaks. The major cell wall biochemical components of the combined outer layers and of their component tissues were analysed. The phenolic acid composition of soft wheat pericarp contained more ferulic acid in either monomeric or polymeric forms than the pericarp from hard wheat. Arabinoxylans in walls of the soft wheat pericarp appeared 1.6 times more cross-linked by ferulic acid dehydrodimers than walls of hard wheat. These differences in arabinoxylan cross-linking may explain the observed differences in pericarp mechanical properties.     

Mechanical properties of uniaxial natural fabric Grewia tilifolia reinforced epoxy based composites: Effects of chemical treatment

The effects of chemical treatment on the mechanical, morphological, and chemical resistance properties of uniaxial natural fabrics, Grewia tilifolia/epoxy composites, were studied. In order to enhance the interfacial bonding between the epoxy matrix and the Grewia tilifolia fabrics, two different types of treatment: alkali treatment (5 % NaOH) and (3-aminopropyl)-triethoxysilane coupling agent (CA), were used. The epoxy composites containing 0–15 wt% of Grewia tilifolia fabric were prepared by hand lay-up technique, at room temperature. The tensile and flexural properties of the untreated, alkali-treated and coupling agent treated Grewia tilifolia reinforced epoxy composites were determined as a function of fabric loading. The 9 % wt Grewia tilifolia fabric reinforced epoxy composites showed improved tensile and flexural modulii when compared to the neat epoxy matrix. Significant improvement in the mechanical properties was obtained when both alkali and coupling agent treated fabrics were used as reinforcement. Morphological studies demonstrated that better adhesion between the fabrics and the matrix was achieved especially when the alkali-treated and coupling agent treated Grewia tilifolia fabrics were used in the composites. For the water absorption and chemical resistance studies, various solvents, acids and alkalis were used on the epoxy composites. This study has shown that Grewia tilifolia fabric/epoxy composites are promising candidates for structural applications, where high strength and stiffness are required.     

Surface treatments of jute fabric: The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites

In this study, jute fabrics were modified by alkali, micro-emulsion silicon (MS) and fluorocarbon based agents (FA) in order to enhance the interfacial adhesion between the polyester matrix and the jute fiber. X-ray photoelectron spectroscopy (XPS) and contact angle measurements were used to characterize fiber surfaces. The effects of various surface treatments on the mechanical and morphological of jute/polyester composites were also studied. All surface treatments were shown to improve the tensile, flexural strengths and interlaminar shear strengths of the composites. Moreover, the maximum improvement in the mechanical properties was obtained for the FA treated jute/polyester composites. SEM micrographs of the tensile fracture surface of jute/unsaturated polyester composites also exhibited improvement of interfacial and interlaminar shear strengths by the alkali, MS and FA treatments of jute fibers.     

Mechanical and thermal properties of josapine pineapple leaf fiber (PALF) and PALF-reinforced vinyl ester composites

Although the pineapple leaf fibers (PALF) are long known as domestic threading material in Malaysia, they are currently of little use despite being mechanically and environmentally sound. This study evaluated some selected properties of Josapine PALF and PALF-vinyl ester composites as well as the effects of simple abrasive combing and pretreatments on fiber and composite properties. Using PALF vascular bundles extracted from different parts of the leaves did not significantly affect PALF-vinyl ester composite mechanical properties. At low weight fraction and consolidating pressure, PALF fibers regardless of diameters and locations performed equally well in enhancing composite flexural properties under static loading. Finer bundles enhanced PALF-vinyl ester composite toughness indicated by tests at higher speeds. Abrasive combing produces cleaner and finer bundles suitable for reinforcing composites for applications not requiring high toughness.