Organo-clay formulations of the hydrophobic herbicide norflurazon yield reduced leaching

The study aimed to reduce leaching of the hydrophobic herbicide norflurazon (4-chloro-5-methylamino-2-(alpha,alpha, alpha)-trifluoro-m-tolylpyridazin-3-(2H)-one) by adsorbing it on clays or organo-clays. The surface of the clay mineral montmorillonite was modified from hydrophilic to hydrophobic by preadsorbing it with organic cations, of which thioflavin-T (TFT) at a loading corresponding to (5)/(8) of the cation-exchange capacity of the clay mineral yielded the highest affinity of adsorption of norflurazon. Pillared clay (PC) used without organic cations exhibited enhanced affinity for norflurazon adsorption, much higher than that of montmorillonite or sepiolite. Fourier transform infrared (FTIR) results showed interactions between aromatic moieties of preadsorbed TFT and the herbicide. Stronger interaction of the herbicide with a clay mineral or organo-clay corresponded to its slower release. Formulations prepared on the basis of montmorillonite-TFT and PC were more effective in reducing herbicide leaching in soil columns in comparison to the commercial formulation, whereas the herbicidal efficiencies were comparable.     

Montmorillonite-phenyltrimethylammonium yields environmentally improved formulations of hydrophobic herbicides

This study aimed to design formulations of hydrophobic herbicides, alachlor and metolachlor, by adsorbing them on the clay mineral montmorillonite preadsorbed by the small organic cation phenyltrimethylammonium (PTMA). An adsorption model that considers electrostatics and specific binding and the possibility of cation adsorption above the cation exchange capacity (CEC) could explain and yield predictions for PTMA adsorption in the presence of NaCl concentrations from 0 to 500 mM. Adsorption of alachlor and metolachlor from aqueous solution on a clay mineral preadsorbed by PTMA was determined by GC and modeled by Langmuir equation. Herbicide interactions with the organoclay were studied by Fourier transform infrared spectroscopy. Leaching of herbicides was determined by a bioassay using a column technique and Setaria viridis as a test plant. The adsorbed amounts of alachlor and metolachlor on montmorillonite preadsorbed by PTMA at a loading of 0. 5 mol/kg (Mont-PTMA0.5) were higher than at a loading up to the CEC, that is, 0.8 mol/kg, and were higher than those obtained by using several other organic cations. Herbicide formulations based on Mont-PTMA0.5 yielded the largest shifts of the infrared peaks of the herbicides. These formulations based on Mont-PTMA0.5 gave slower release and showed improved weed control in comparison with formulations based on other organoclays. These formulations maintained herbicidal activity in the topsoil and yielded the most significant reduction in herbicide leaching.     

Sulfometuron incorporation in cationic micelles adsorbed on montmorillonite

The aim of this study was to understand the interactions between alkylammonium cations present as monomers and micelles and a clay mineral, montmorillonite, to develop slow release formulations of anionic herbicides, such as sulfometuron (SFM) whose leaching in soils is an environmental and economic problem. In the proposed formulation the herbicide is incorporated in positively charged micelles of quaternary amine cations, which in turn adsorb on the negatively charged clay. The adsorption of hexadecyltrimethylammonium (HDTMA) and octadecyltrimethylammonium (ODTMA) on montmorillonite was studied above and below their critical micelle concentrations (CMC). At concentrations above the CMC, the loading exceeded the clay's cation exchange capacity (CEC) and indicated higher affinity of the cation with the longer alkyl chain. An adsorption model could adequately simulate adsorption at concentrations below the CMC, and yield fair predictions for the effect of ionic strength. The model indicated that above the CMC adsorbed micelles contributed significantly to the amount of ODTMA adsorbed. Evidence for adsorption of ODTMA micelles on montmorillonite was provided by X-ray diffraction, freeze-fracture electron microscopy, and dialysis bag measurements. SFM was not adsorbed directly on the clay mineral, and adsorbed at low levels, when the organic cation was adsorbed as monomers. In contrast, a large fraction of SFM adsorbed on the clay mineral when incorporated in micelles that adsorbed on the clay.     

Selective modification of clay minerals for the adsorption of herbicides widely used in olive groves

Ground and surface water contamination by herbicides applied to olive groves in Spain and other Mediterranean countries is demanding strategies to prevent and remediate the environmental problems repeatedly caused by such herbicides. In this study, six different organic cations (L-carnitine, spermine, hexadimethrine, tyramine, phenyltrimethylammonium, and hexadecyltrimethylammonium) were incorporated into Na-rich Wyoming montmorillonite (SWy-2) and Ca-rich Arizona montmorillonite (SAz-1) at two different loadings (50% and 100% of the cation exchange capacity of the clays) as a strategy to enhance the affinity of the clay minerals for three herbicides widely used in olive groves: terbuthylazine, diuron, and MCPA. The modified montmorillonites were characterized and tested as adsorbents of the herbicides through batch adsorption tests. At the experimental conditions used, some of the modified montmorillonites removed more than 95% of the herbicide initially present in aqueous solution, whereas the unmodified clays removed less than 15%. All three herbicides displayed very strong affinities for SAz-1 exchanged with hexadecyltrimethylammonium cations, particularly when these were incorporated at 100% of the cation exchange capacity of the clay mineral. Terbuthylazine and diuron also displayed very strong affinities for SWy-2 exchanged with L-carnitine and spermine, respectively. The chemical characteristics of the organic cation greatly influenced the adsorptive properties of the resultant organoclay. The herbicides were in general reversibly adsorbed by the modified clays. The results indicate that some of the tested modified clays could be suitable for the removal of the assayed herbicides from contaminated water and also as possible supports for the design of slow release formulations of such herbicides to attenuate their environmental impact when used in high-risk scenarios such as olive groves.     

Organo-clay formulation of acetochlor for reduced movement in soil.

This study aimed to design ecologically acceptable formulations of acetochlor by adsorbing it on montmorillonite exchanged by a small organic cation, phenyltrimethylammonium (PTMA). Adsorption of acetochlor on the clay mineral exchanged with different organic cations and its release from these complexes were determined by GC and modeled by Langmuir equation. Interactions between acetochlor molecules and the exchanged organic cation on the clay surface were studied by Fourier transform infrared spectroscopy. Leaching of acetochlor in soil was determined by a bioassay using a column technique and Setaria viridis as a test plant. The adsorbed amounts of acetochlor on montmorillonite exchanged by PTMA at a loading of 0.5 mmol/g of clay were higher than at a loading up to the cation-exchange capacity, i.e., 0.8 mmol/g, and were higher than obtained by using a clay mineral exchanged by other organic cations. Preloading montmorillonite by PTMA at 0.5 mmol/g yielded maximal shifts of the infrared peaks of the herbicide. The above formulation of acetochlor yielded slow release in water and showed improved weed control in field and greenhouse experiments in comparison with the commercial formulation. The PTMA-clay formulation of acetochlor maintained herbicidal activity in the topsoil and yielded the most significant reduction in herbicide leaching and persistence under field conditions. The application of this formulation can minimize the risk to groundwater and can reduce the applied rates.     

Herbicide solubilization in micelle-clay composites as a basis for controlled release sulfentrazone and metolachlor formulations

Sulfentrazone and metolachlor have been detected in groundwater due to extensive leaching. To reduce herbicide leaching and increase weed control, we have developed, designed, and tested controlled release formulations (CRFs) for both herbicides based on their solubilizion in cationic micelles and adsorption of the mixed micelles (surfactant and herbicide) on a clay mineral, montmorillonite. A better understanding of solubilizing anionic (sulfentrazone) and nonionic (metolachlor) organic molecules in cationic micelles was reached. The percent of active ingredient in the formulations was much higher than previously designed CRFs due to the enhanced solubilization of the herbicides in the micelles and due to their adsorption on the clay. Both CRFs demonstrated controlled release (compared to the commercial formulations) when applied to a thin soil layer. A bioassay in soil columns determined that the new sulfentrazone and metolachlor CRFs significantly improve weed control and reduce leaching (for the latter) in comparison with the commercial formulations.     

Effect of soil type on adsorption-desorption, mobility, and activity of the herbicide norflurazon

Adsorption-desorption studies of norflurazon on 17 soils of very different characteristics have been performed using a batch equilibration method and correlated to its mobility, activity, and persistence in soils. The influence of different soil properties and components on norflurazon adsorption was determined. The significant variables were organic matter (OM) content and iron and aluminum oxides, which accounted for 85 and 11% of the variability, respectively. Norflurazon desorption from soils was hysteretic in all cases, being more irreversible at the lowest herbicide concentrations adsorbed. The percentage of norflurazon eluted from columns of selected soils reached almost 100% in soils with sand content >80% and OM <1%, but in the soil which gave the highest sorption, herbicide residues were not detected at depths >16 cm. The herbicidal activity of norflurazon was followed by measuring its bleaching effect on soybean plants, and the herbicide concentration required to give 50% chlorophyll inhibition (CI(50)) was calculated. CI(50) was achieved on a sandy soil with 0.08 mg x kg(-)(1), whereas 1.98 mg x kg(-)(1) was necessary for the soil that presented maximum norflurazon adsorption.     

Inorganic and organic clays as carriers for controlled release of the herbicide hexazinone

The risk of ground water contamination resulting from rapid leaching of highly soluble pesticides can be minimized through the application of the pesticide adsorbed on a matrix or carrier, which limits the amount of pesticide immediately available for undesirable losses. The use of natural materials for this purpose is of special interest in terms of economy and sustainability. In this work the adsorption of the herbicide hexazinone by two montmorillonites saturated with various inorganic and organic cations was determined and the ability of the two clays displaying the highest adsorption capacities [Fe(3+)-saturated Wyoming montmorillonite, (Fe-SW) and hexadecyltrimethylammonium-saturated Arizona montmorillonite (HDTMA-SA)] to act as carriers for slow release of hexazinone and to reduce herbicide leaching losses was evaluated. Hexazinone formulations based on Fe-SW and HDTMA-SA displayed slow release properties in water and soil/water suspensions, reduced herbicide leaching in soil columns, and maintained herbicidal activity, as compared with the currently available commercial hexazinone formulation (wettable powder). Loosely bound hexazinone-HDTMASA formulations, which led to the slowest breakthrough of hexazinone in soil columns along with the greatest amounts of herbicide released from the clay particles, displayed the most interesting characteristics for their use as slow release formulations and to prevent ground water contamination.     

Preparation and characterization of inclusion complex of norflurazon and beta-cyclodextrin to improve herbicide formulations

The formulation of inclusion complexes of the herbicide norflurazon as guest and beta-cyclodextrin (beta-CD) as host has been studied as a first step in the use of cyclodextrins to obtain improved formulations of this herbicide. The interaction of norflurazon with beta-CD produced the formation of an inclusion complex in solution and in solid state. The inclusion of norflurazon in beta-CD in solution was studied by phase solubility, and an apparent stability constant of 360 M(-)(1), a 1:1 stoichiometric ratio for the complex, and up to 5-fold increase in norflurazon solubility were determined. Three processing methods (kneading, spray drying and vacuum evaporation) were used to prepare norflurazon-beta-CD solid inclusion complexes. X-ray diffraction, infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy techniques were used to study the solid complexes. From the different solid systems, an increase of norflurazon aqueous dissolution rate was obtained in comparison to the uncomplexed herbicide. This finding is a first step to obtain controlled release and/or protective formulations of norflurazon, which allow a more rational application of norflurazon, diminishing the use of organic solvents and increasing its efficacy.     

Environmentally friendly formulations of alachlor and atrazine: preparation, characterization, and reduced leaching

Atrazine and alachlor formulations were designed by encapsulating the herbicide molecules into phosphatidylcholine (PC) vesicles, which subsequently were adsorbed on montmorillonite. PC and montmorillonite are classified as substances of minimal toxicological risk by the U.S. EPA. PC enhanced alachlor and atrazine solubilities by 15- and 18-fold, respectively. A 6 mM PC:5 g/L clay ratio was found as optimal for PC adsorption on the clay. Active ingredient contents of the PC-clay formulations ranged up to 8.6% for atrazine and 39.5% for alachlor. Infrared spectroscopy showed hydrophobic interactions of herbicide molecules with the alkyl chains of PC, in addition to hydrophilic interactions with the PC headgroup. Release experiments in a sandy soil showed a slower rate from the PC-clay formulations than the commercial ones. Soil column experiments under moderate irrigation and bioactivity experiments indicate that a reduction in the recommended dose of alachlor and atrazine can be accomplished by using PC-clay formulations.     

Norflurazon mobility, dissipation, activity, and persistence in a sandy soil as influenced by formulation

Five ethylcellulose (EC) microencapsulated formulations (MEFs) of norflurazon were prepared and applied in soil to study their mobility, dissipation, activity, and persistence. The results show that the release into water of norflurazon from EC microspheres was retarded when compared with that of commercial herbicide. The mobility of norflurazon from MEFs into soil columns has been greatly diminished in comparison with that of its current commercial formulation (CF). Norflurazon distribution at different depths in the soil was higher in the upper ring (up to 50% of the initial application). In contrast, the residues from commercial norflurazon along the complete soil column were only about 2%. Degradation and bioassay experiments showed that the MEFs had greater persistence (t1/2 values were 7.72 and 30.83 weeks for CF and MEFs, respectively) and herbicidal activity than the commercial formulation. The use of these formulations can be advantageous, because they can minimize the risk of groundwater contamination and permit herbicide use at reduced rates, maintaining the desired concentrations of herbicide in the topsoil layer for longer periods of weed control.     

Influence of soil properties on the adsorption and mobility of metamitron

Abstract

The adsorption and mobility of herbicide, metamitron, in 41 soils samples from the province of Salamanca (Spain) was studied. Thirty‐four of the samples assayed were from irrigated soils and seven were from natural, uncultivated soils with organic matter contents above 3%. The correlations between the Freundlich K constants, Kd distribution coefficients, and Rf mobility parameters and the soils parameters were determined. Considering all the soils, the soils with organic matter contents above 2% or the soils with organic matter contents below 2%, significant correlations (p<0.001 to p<0.05) were found between K and Kd and the organic matter content of the soils. There were also a significant correlations (p<0.05) of K and Kd with clay+silt and clay contents of soils with organic matter contents below 2%. The adsorption of the herbicide by isolated soil components confirmed the results obtained with the soils and point to the importance of the exchangeable cation nature of the samples in the adsorption process. Based on Rf values obtained by TLC, the herbicide was found to be moderately mobile in 74% and mobile in 26% of the soils studied. The results of metamitron leaching by thin layer chromatography (TLC) and in undisturbed soil columns indicated the influence of organic matter content and of soil texture on the mobility of this herbicide.     

Simultaneous fluometuron and norflurazon analysis in soil extracts and leachates

Abstract

Rapid, methanol‐extraction techniques for fluometuron (N, N‐dimethyl‐N'‐[3‐(trifluoromethyl) phenyl] urea) and norflurazon (4‐chloro‐5‐(methylamino)‐2‐(3‐(trifluoromethyl)phenyl)‐3(2(H)‐pyridazinone) from fortified soils have been reported to attain >90% recoveries. Analytical methods involving chromatographic separation coupled with fluorescence detection have also been described. The objectives of this study were to describe an analytical method for the simultaneous detection of fluometuron and norflurazon using ultraviolet spectro‐scopy in soil leachates and extracts and to examine the influence of residence time on herbicide recovery from fortified soil. The analytical method requires a gradient HPLC system, a reverse‐phase C‐18 column, and ultraviolet spectroscopy at a wavelength of 240 nm. The method is characterized by high reproducibility (spike recovery and diluted sample results are generally within 10% of the expected herbicide concentrations), low limits of detection (less than 1 (μg/L in soil leachates and 20 μg/L in soil extracts, depending on organic carbon content), and an applicable concentration range of more than two orders of magnitude. The recovery of fluometuron and norflurazon from fortified soils was significantly influenced by equilibration time, loading rate, and soil type (assuming zero chemical degradation). Most significantly, as herbicide contact time with the soil increased, recovery decreased. Thus, herbicide recoveries determined in the laboratory may not provide a true measure of herbicide recoveries from field soils.     

Sulfosulfuron incorporated in micelles adsorbed on montmorillonite for slow release formulations

Slow release formulations of the anionic herbicide sulfosulfuron (SFS) were prepared by incorporating it in micelles of an organic cation octadecyltrimethylammonium, which adsorb on the clay-mineral montmorillonite. The fraction of SFS adsorbed on the micelle-clay complex reached 98%, whereas for monomer-clay complexes, its adsorption was insignificant. Fluorescence studies showed surface contact between the micelles and the clay surface. The rate of SFS release from the micelle-clay formulations in aqueous suspensions was slow (<1%, 72 h). Spraying SFS formulations on a thin soil layer in a funnel, followed by irrigations (50 mm), resulted in complete elution of SFS from the commercial formulation (dispersible granular) versus 4% from the micelle-clay formulation. A plant bioassay in Rehovot soil showed that these respective formulations yielded 23 and 65% of shoot growth inhibition of foxtail. Consequently, the slow release micelle-clay formulations of SFS yield significantly reduced leaching and enhanced biological activity, thus providing environmental and agricultural advantages.     

Adsorption mechanisms of thiazafluron in mineral soil clay components

The adsorption of the herbicide thiazafluron, 1,3-dimethyl-1-(5-trifluoromethyl-1,3,4-thiadiazol-2-yl)urea, by three smectites, illite, kaolinite, ferrihydrite and the clay fraction of an illitic soil (54.9% illite, 17.0% montmorillonite and 24.9% kaolinite) and a montmorillonitic soil (33.9% illite, 55.0% montmorillonite and 11.1% kaolinite) has been determined. Thiazafluron adsorbed on neither kaolinite nor iron oxide. The adsorption isotherms on smectites and illite conformed to the Freundlich equation. Values of K_f-obtained for smectites were larger than for the illite and increased as the layer charge of the smectite decreased. Desorption of thiazafluron on smectites was shown to be highly irreversible. Adsorption isotherms of thiazafluron on different homoionic montmorillonite samples suggest an important role of the exchangeable cations in the adsorption. Infrared spectra and X-ray diffraction analysis of the complexes of thiazafluron with homoionic montmorillonites indicated that thiazafluron adsorbs in the interlamellar space of the smectites, mainly by substitution of water molecules associated with the exchangeable cations through the carbonyl-amide group and formation of H-bonds or waterbridge between the NH group of the amide and the basal oxygens of the montmorillonite. The illitic soil clay adsorbed more of the herbicide than the montmorillonitic one did, suggesting that illite and montmorillonite may be present in soils in altered forms giving rise to different adsorption capacities from those of the pure minerals.     

Influence of herbicide structure,clay acidity,and humic acid coating on acetanilide herbicide adsorption on homoionic clays

Adsorption of chloroacetanilide herbicides on homoionic montmorillonite was studied by coupling batch equilibration and FT-IR analysis. Adsorption decreased in the order metolachlor > acetochlor > alachlor > propachlor on Ca(2+)- or Mg(2+)-saturated clays and in the order metolachlor > alachlor > acetachlor > propachlor on Al(3+)- or Fe(3+)-saturated clays. FT-IR spectra showed that the carbonyl group of the herbicide molecule was involved in bonding. For the same herbicide, adsorption of alachlor, acetachlor, and metolachlor on clay followed the order Ca(2+) approximately Mg(2+) < Al(3+) < or = Fe(3+), which coincided with the increasing acidity of homoionic clays. Adsorption of propachlor, however, showed an opposite dependence, suggesting a different governing interaction. In clay and humic acid mixtures, herbicide adsorption was less than that expected from independent additive adsorption by the individual constituents, and the deviation was dependent on the clay-to-humic acid ratio, with the greatest deviation consistently occurring at a 60:40 clay-to-humic acid ratio.     

Adsorption of DNA on clay minerals and various colloidal particles from an Alfisol

Adsorption and desorption of salmon sperm DNA on four different colloidal fractions from Brown Soil and clay minerals were studied. The adsorption isotherms of DNA on the examined soil colloids and minerals conformed to the Langmuir equation. The amount of DNA adsorbed followed the order: montmorillonite?fine inorganic clay>fine organic clay>kaolinite>coarse inorganic clay>coarse organic clay. A marked decrease in the adsorption of DNA on organic clays and montmorillonite was observed with the increase of pH from 2.0 to 5.0. Negligible DNA was adsorbed by organic clays above pH 5.0. As for inorganic clays and kaolinite, a slow decrease in DNA adsorption was found with increasing pH from 2.0 to 9.0. The results implied that electrostatic interactions played a more important role in DNA adsorption on organic clays and montmorillonite. Magnesium ion was more efficient than sodium ion in promoting DNA adsorption on soil colloids and minerals. DNA molecules on soil colloids and minerals were desorbed by sequential washing with 10 mM Tris, 100 mM NaCl and 100 mM phosphate at pH 7.0. A percentage of 53.7-64.4% of adsorbed DNA on organic clays and montmorillonite was released, while only 10.7-15.2% of DNA on inorganic clays and kaolinite was desorbed by Tris and NaCl. The percent desorption of DNA from inorganic clays, organic clays, montmorillonite and kaolinite by phosphate was 39.7-42.2, 23.6-28.8, 29.7 and 11.4%, respectively. Data from this work indicated that fine clays dominate the amount of DNA adsorption and coarse clays play a more important role in the binding affinity of DNA in soil. Organic matter may not favor DNA adsorption in permanent-charge soil. The information obtained is of fundamental significance for the understanding of the ultimate fate of extracellular DNA in soil.     

Natural soil colloids To retard simazine and 2,4-D leaching in soil

Natural or synthetic sorbents for pesticides can be used to reduce contamination of soils and natural waters. The sorption of simazine and 2,4-D on montmorillonite minerals has been studied and their potential use to retard pesticide leaching in soil evaluated. Simazine and 2,4-D did not sorb on high-layer charge montmorillonite, whereas sorption on the lower layer charge montmorillonite SWy varied depending on the saturating cation. Simazine sorption increased in the order Ca(2+)SWy < K(+)SWy < Fe(3+)SWy. Simazine molecules sorb on hydrophobic microsites of the montmorillonite. Once protonated, further sorption through cation exchange takes place in the interlamellar space of the montmorillonite, as corroborated by X-ray diffraction and FT-IR studies. 2,4-D does not sorb on K(+)SWy or Ca(2+)SWy, but does sorb on Fe(3+)SWy, because the acidic character of this sorbent allows the molecular form of 2, 4-D to sorb by hydrogen bonding and/or by hydrophobic interactions. Leaching experiments in hand-packed soil columns indicate that simazine and 2,4-D application as a complex with FeSWy renders later breakthrough and lower maximum concentration peaks, and the total herbicide leached is lower than when applied as the pure analytical grade compound. These results suggest the possible use of natural soil colloids as sorbents for herbicides such as simazine and 2,4-D to retard pesticide leaching in soil, thus reducing their ground water contamination potential.     

Slow-release formulations of sulfometuron incorporated in micelles adsorbed on montmorillonite

The design and tests of slow-release formulations of sulfometuron (SFM), an anionic sulfonylurea herbicide, are described. The formulations are based on incorporation of the herbicide in octadecyltrimethylammonium (ODTMA) micelles, which adsorb on a clay mineral, montmorillonite. An optimization of herbicide/micelle clay ratios yielded high adsorption of SFM (95%), and at a 1% (w/w) water suspension only 0.5% of the adsorbed SFM was released at times varying from hours to 9 days. An analytical test in Seville soil showed that under excessive irrigation (400 mm) 100% of the commercial formulation leached, whereas the micelle-clay formulations showed only 50-65% elution. A plant bioassay in Rehovot soil showed that the commercial dispersible granule formulation (Oust, 75% ai sulfometuron methyl) yielded only 23% root elongation inhibition at the top 5 cm of the soil, whereas complete inhibition was achieved with the micelle-clay formulation. The detected concentration of SFM for the micelle-clay formulation at a depth of 15-20 cm was half of that detected for the commercial one, indicating a reduction in leaching when applying the micelle-clay formulation. A 10-fold reduction in the applied dose of SFM in the micelle-clay formulations resulted in good herbicidal activity of 60-87% inhibition. These characteristics make the new formulation promising from the environmental and economic points of view.     

胡敏酸对铵钾在粘土矿物上交互作用的影响

Interaction of ammonium (NH+4) and potassium (K+) is typical in field soils. However, the effects of organic matter on interaction of NH+4 and K+have not been thoroughly investigated. In this study, we examined the changes in major physicochemical properties of three clay minerals (kaolinite, illite, and montmorillonite) after humic acid (HA) coating and evaluated the influences of these changes on the interaction of NH+4 and K+on clay minerals using batch experiments. After HA coating, the cation exchange capacity (CEC) and specific surface area (SSA) of montmorillonite decreased significantly, while little decrease in CEC and SSA occurred in illite and only a slight increase in CEC was found in kaolinite. Humic acid coating significantly increased cation adsorption and preference for NH+4, and this effect was more obvious on clay minerals with a lower CEC. Results of Fourier transform infrared spectrometry analysis showed that HA coating promoted the formation of H-bonds between the adsorbed NH+4 and the organo-mineral complexes. HA coating increased cation fixation capacity on montmorillonite and kaolinite, but the opposite occurred on illite. In addition, HA coating increased the competitiveness of NH+4 on fixation sites. These results showed that HA coating affected both the nature of clay mineral surfaces and the reactions of NH+4 and K+with clay minerals, which might influence the availability of nutrient cations to plants in field soils amended with organic matter.