Lonar lake, India: an impact crater in basalt

Discovery of shock-metamorphosed material establishes the impact origin of Lonar Crater. Coarse breccia with shatter coning and microbreccia with moderately shocked fragments containing maskelynite were found in drill holes through the crater floor. Trenches on the rim yield strongly shocked fragments in which plagioclase has melted and vesiculated, and bombs and spherules of homogeneous rock melt. As the only known terrestrial impact crater in basalt, Lonar Crater provides unique opportunities for comparison with lunar craters. In particular, microbreccias and glass spherules from Lonar Crater have close analogs among the Apollo specimens.     

Mineralogic evidence for an impact event at the cretaceous-tertiary boundary

A thin claystone layer found in nonmarine rocks at the palynological Cretaceous-Tertiary boundary in eastern Montana contains an anomalously high value of iridium. The nonclay fraction is mostly quartz with minor feldspar, and some of these grains display planar features. These planar features are related to specific crystallographic directions in the quartz lattice. The shocked quartz grains also exhibit asterism and have lowered refractive indices. All these mineralogical features are characteristic of shock metamorphism and are compelling evidence that the shocked grains are the product of a high velocity impact between a large extraterrestrial body and the earth. The shocked minerals represent silicic target material injected into the stratosphere by the impact of the projectile.     

Emplacement of cretaceous-tertiary boundary shocked quartz from chicxulub crater

Observations on shocked quartz in Cretaceous-Tertiary (K-T) boundary sediments compellingly tied to Chicxulub crater raise three problems. First, in North America shocked quartz occurs above the main K-T ejecta layer. Second, shocked quartz is more abundant west than east of Chicxulub. Third, shocked quartz reached distances requiring initial velocities up to 8 kilometers per second, corresponding to shock pressures that would produce melt, not the moderate-pressure shock lamellae observed. Shock devolatilization and the expansion of carbon dioxide and water from impacted wet carbonate, producing a warm, accelerating fireball after the initial hot fireball of silicate vapor, may explain all three problems.     

Shocked quartz in the cretaceous-tertiary boundary clays: evidence for a global distribution

Shocked quartz grains displaying planar features were isolated from Cretaceous- Tertiary boundary clays at five sites in Europe, a core from the north-central Pacific Ocean, and a site in New Zealand. At all of these sites, the planar features in the shocked quartz can be indexed to rational crystallographic planes of the quartz lattice. The grains display streaking indicative of shock in x-ray diffraction photographs and also show reduced refractive indices. These characteristic features of shocked quartz at several sites worldwide confirm that an impact event at the Cretaceous-Tertiary boundary distributed ejecta products in an earth-girdling dust cloud, as postulated by the Alvarez impact hypothesis.     

Oxygen isotope studies of ivory coast tektites and impactite glass from the bosumtwi crater, ghana

Oxygen isotope analyses were obtained for six Ivory Coast tektites, two samples of Bosumtwi Crater glass, and two new moldavites. The Ivory Coast tektites are 2 to 5 per mil richer in oxygen-18 than other known tektites, and they are similar in oxygen-18 content to the impactite glass from the nearby Bosumtwi Crater. These data are compatible with a terrestrial origin for the Ivory Coast tektites.     

Shock effects in certain rock-forming minerals

Shock effects in quartz, plagioclase, biotite, amphibole, and some accessory minerals have been observed in rocks subjected to various degrees of meta morphism by meteoritic impact. The shock features described are unique; they are never observed in rocks from normal geologic environments. Such features are described: 1) Multiple sets of closely spaced planar microstructures occur in quartz, plagioclase, and other rock-forming minerals. Those characteristic of shock consist of alternating platelets, with a range of reduced mean index of re fraction and birefringence; they con sist of platelets that have been partially or completely transformed to an amor phous phase. 2) Quartz and plagioclase are selec tively and completely transformed to silica glass and plagioclase glass in the solid state, whereas the associated mafic minerals remained crystalline. There is no reaction between adjacent minerals. 3) High-pressure polymorphs occur, such as coesite or stishovite. Coesite oc Curs exclusively within silica glass; it has not been observed as a reaction or breakdown product. 4) Nickel-iron spherules occur in the fused glass or impactites. 5) The occurrence of droplets of ilmenite, rutile, pseudobrookite, and baddaleyite in impactites indicates a temperature of formation exceeding 150 degrees C. 6) Dense glass occurs, similar in composition to bulk rock, in which iron oxide, such as fine particles of mag netite, is completely dissolved. All these features are characteristic of a process involving the rapid rise and fall of extremiiely high pressures and temperatures. Minerals and mineral as semblages experiencing such high strain rates and sudden changes of pressures and temperatures react and change in dependently to the bulk chemical com position, under nonequilibrium condi tions. Many aspects of shock features re quire careful study. Kink bands in biotite and deformation lamellae in quartz occur in tectonically deformed rocks. These features should be studied with great care in order to determine whether reduction in mean index of refraction and total birefringence along the planar structures have resulted from vitrification or phase transition; their presence is additional evidence in favor of a shock mechanism. Vitreous phases or glasses formed by shock also have many unique prop erties; they have not been studied by such methods as thermoluminescence, electron spin resonance, low-angle x ray diffraction, or infrared spectroscopy. Shock-fused glass of high density needs to be studied in detail in carefully con trolled laboratory conditions. Experimental shock-wave studies of the equation-of-state of single minerals and mineral assemblages, under care fully controlled conditions, must pre cede estimates of peak pressures and peak and residual temperatures of shocked natural mineral assemblages. Detailed petrographic and mineralogic studies, however, have provided useful and definitive criteria for characteriza tion of impact events. Such data should be of paramount importance in the study of samples brought back from Moon.     

Coesite from the richat dome, mauritania: a misidentification

The "shattered sandstone" from Richat reported to contain coesite is a tectonic breccia and probably represents a shear zone developed during the structural doming. An optical and x-ray examination of concentrates from this breccia demonstrated that the supposed x-ray reflections of coesite are actually due to barite, introduced into the permeable crushed zone by groundwater.     

Sudbury structure, ontario: some petrographic evidence for origin by meteorite impact

Unusual deformation structures, similar to those observed in rocks from known and suspected meteorite impact craters, are observed in inclusions of basement rock in the Onaping formation at Sudbury, Ontario. These features, which include planar sets in quartz parallel to the (0001) and (10ī3) planes, suggest that the Onaping formation consists of shocked and melted material deposited immediately after a meteorite impact which formed the Sudbury basin.     

Impacts, tsunamis, and the haitian cretaceous-tertiary boundary layer

The marker bed at the Cretaceous-Tertiary boundary of the Beloc Formation (southern Haiti) contains abundant coarse-grained microtektites and minor amounts of shocked quartz grains in the basal part. The upper part is composed of medium-grained marl with amalgamated microtektite lenses and finer-grained marl lenses disseminated throughout. Field and petrographic observations, and the distribution of planktonic foraminifera suggest that the bed formed from a complex sequence of events. A bolide impact nearby produced microtektites that sett1led to form a nearly pure layer at the base. Vaporized materials with anomalously high extraterrestrial components settled last, along with carbonate sediments. The entire bed became sparsely consolidated. Subsequently, another major disruptive event, perhaps a giant tsunami, partly reworked the initial deposit. Cohesive fragments of the original marker bed mixed with exotic materials were redeposited as lenticular bodies. This process also may have caused further mixing of Cretaceous and Tertiary microfossils, as observed at Beloc and elsewhere.     

Shocked quartz at the triassic-jurassic boundary in Italy

Quartz grains that appear to have been shock-metamorphosed occur within three closely spaced shale beds from the uppermost Triassic ("Rhaetian") Calcare a Rhaetavicula in the Northern Apennines of Italy. The upper shale coincides with the abrupt termination of the distinctive, uppermost Triassic Rhaetavicula fauna and is overlain by the Hettangian (Lower Jurassic) Calcare Massiccio; no extinctions appear to be associated with the two lower layers, which occur 1.2 and 2.4 meters below the boundary shale. Approximately 5 to 10% of the quartz grains within these layers exhibit one or more sets of planar deformational features whose orientations cluster around the rational crystallographic planes (basal, omega, and pi) most commonly observed in shocked quartz. Textural and stratigraphic observations support an interpretation of at least three closely spaced impacts at the end of the Triassic.     

Cation disorder in shocked orthopyroxene

The distribution of magnesium and iron over the M1 and M2 positions in Bamle enstatite shocked at 1 megabar is highly disordered. It corresponds to an equilibrium distribution of at least 1000 degrees C. The distribution in samples shocked at 450 kilobars or less is undisturbed.     

Neutron activation for distinguishing cascade range pyroclastics

Neutron activation of glassy separates of volcanic ash resulted in 21 nuclides measurable with instrumental techniques. The relative activities of most of the nuclides distinguish samples from Mount Mazama, Newberry Crater, and Glacier Peak. The usefulness of the technique was assessed by comparing the values for known sources with those from fine ash of uncertain origin. The data strongly suggest Mount Mazama as the source.     

Zircon and chromite crystals in a muong nong-type tektite

Chromite, zircon, and quartz crystals (identified by x-ray diffraction) have been recovered from a 2.07-gram sample of Muong Nong-type tektite. The absence of eskolaite (Cr(2)O(3)) and baddeleyite (ZrO(2)) supports a previous conclusion that Muong Nong-type tektites were not heated as intensely as other tektite groups. X-ray asterism studies indicate that the crystals are shocked, which supports an impact origin. The presence of chromite and zircon together suggests that the Muong Nong-type tektite was produced from sedimentary material.     

Mossbauer investigation of shocked and unshocked iron meteorites and fayalite

M?ssbauer spectra of several iron meteorites have been measured by a resonant scattering technique rather than by the conventional transmission method, thereby eliminating the necessity for the preparation of thin samples. No significant differences were observed in the spectra of specimens of mechanically deformed, shocked, and unshocked iron meteorites, nor in the absorption spectra of artificially shocked and unshocked fayalite.     

Impact ejecta layer from the mid-Devonian: possible connection to global mass extinctions

We have found evidence for a bolide impacting Earth in the mid-Devonian ( approximately 380 million years ago), including high concentrations of shocked quartz, Ni, Cr, As, V, and Co anomalies; a large negative carbon isotope shift (-9 per mil); and microspherules and microcrysts at Jebel Mech Irdane in the Anti Atlas desert near Rissani, Morocco. This impact is important because it is coincident with a major global extinction event (Kacák/otomari event), suggesting a possible cause-and-effect relation between the impact and the extinction. The result may represent the extinction of as many as 40% of all living marine animal genera.     

Neutron-induced fission of uranium: a dating method for lunar surface material

Volcanic glasses collected on the rim of Shorty Crater in the Apollo 17 area were formed 3.63 x 10(9) years ago. The amounts of xenon-136 produced by neutron-induced fission of uranium-235 indicate that the glasses resided on the lunar surface for about 38 million years before they were deeply buried. The glass spherules were reexcavated by the impact that formed Shorty Crater 17 million years ago, and remained undisturbed until they were collected.     

Rock-type discrimination from ratioed infrared scanner images of pisgah crater, california

The radiances in two thermal infrared channels of an airborne scanner system were ratioed to produce images that recorded compositionally diagnostic emittance variations for several silicate rock types near Pisgah Crater, California.     

Coesite and Stishovite: Stepwise Reversal Transformations

Very marked differences in the metastable persistence of coesite and stishovite have been demonstrated; the former possibly persists indefinitely below 1000 degrees C at 1 atmosphere "dry," and the latter completely decomposes in minutes above 500 degrees to 600 degrees C to an amorphous or short range order phase. Quartz was grown (metastably) at temperatures well above its stability field from both coesite and stishovite, possibly by way of a short range order phase. The absence of stishovite in meteor-impact craters cannot be taken as evidence that it was not formed. If it has "reversed" in normal natural environments the product would almost certainly be a short range order phase or derivative.     

Infrared spectral emittance in geological mapping: airborne spectrometer data from pisgah crater, california

Measurements of spectral emittance in the infrared region from 6.8 to 13.3 micrometers were made with an airborne spectrometer at a rate of six spectra per second, on flights 650 meters above the olivine basalt flows at Pisgah Crater in the southern Californian desert. The spectra show chemical and mineralogical differences that can be related to differences in the terrain below the aircraft.     

Neutron Activation Analysis of Fluid Inclusions for Copper, Manganese, and Zinc

Microgram quantities of copper, manganese, and zinc, corresponding to concentrations greater than 100 parts per million, were found in milligram quantities of primary inclusion fluid extracted from samples of quartz and fluorite from two types of ore deposits. The results indicate that neutron activation is a useful analytical method for studying the content of heavy metal in fluid inclusions.