Optimized soil inversion in the headlands with a novel section-controlled mouldboard ploughing system

In inversion tillage systems, the mouldboard plough is fundamental for producing a desirable seedbed. The desired ploughing quality is achieved when the plough layer is inverted homogeneously. This is, however, difficult to obtain in the main-headland intersection zone where the plough is lowered and elevated, as ploughed and unploughed triangles are formed. This results in zones where the soil is inverted twice, which may result in poor residue and weed incorporation and a poor seedbed quality. The design of the three-point linkage-attached mouldboard plough has not changed since the 1950s, but the number of furrows has increased, which has increased the size of the aforementioned triangles. A novel ploughing system was introduced to meet these headland challenges, where each plough section can be lowered and elevated independently. The aim of this study was to evaluate the effects of using a section-controlled mouldboard plough. Two similarly designed, randomized, field plot experiments were conducted on two different soil types (sandy loam and loamy sand) on a stubble field and grass field. The study showed that the section-controlled plough reduced the main-headland overlap area by ~98%. The results of a range of soil physical properties measurements and seedbed quality analyses showed that the section-controlled plough created a homogeneous loosened seedbed quality, improving the incorporation of crop residues and leaving fewer residues on the soil surface. Furthermore, the section-controlled plough showed additional benefits, for example wedge operations and visual line marking.     

Effect of tillage intensity on weed infestation in organic farming

Conservation tillage is not yet widely accepted by organic farmers because inversion tillage is considered to be necessary for weed control. Three long-term experiments were established with combinations of reduced and conventional plough tillage and stubble tillage to determine weed infestation levels in organic farming, i.e. herbicide application being excluded. Experiment 1 (with very low stocking density of perennial weeds) showed that in presence of primary tillage by mouldboard ploughing the number of annual weeds was nearly unaffected by the mode of stubble tillage. In experiment 2, however, with Canada thistle (Cirsium arvense) being artificially established, thistle density was significantly affected by stubble tillage and by a perennial grass–clover forage crop. Experiment 3 combined two levels of stubble tillage (skimmer plough, no stubble tillage = control) with four implements of primary tillage in the order of decreasing operation depth (deep mouldboard plough, double-layer plough, shallow mouldboard plough or chisel plough). Primary tillage by chisel plough resulted in significantly highest annual weed density compared to all other treatments. The natural C. arvense infestation in experiment 3 showed highest shoot density in the “skimmer plough/chisel plough” treatment compared to the lowest infestation in the “skimmer plough/double-layer plough” treatment. The poor capacity of the chisel plough for weed control was also reflected by the soil seed bank (5500 m⁻² C. arvense seeds for chisel plough, <300 seeds for all other primary tillage). A reduced operation depth of the mouldboard plough (“shallow mouldboard plough”) seemed to have an insufficient effect in controlling C. arvense infestation as well. Stubble tillage by the skimmer plough in addition to nearly any primary tillage operation largely reduced both annual weeds and thistle shoots. Most effective in controlling C. arvense was also a biennial grass–clover mixture as part of the crop rotation.Double-layer ploughing is a compromise between soil inversion and soil loosening/cutting and can be regarded as a step towards conservation tillage. In terms of controlling annual weeds and C. arvense, the double-layer plough was not inferior to a deep mouldboard plough and seems to be suitable for weed control in organic farming. Tilling the stubble shallowly after harvest can support weed control in organic farming remarkably, particularly in reducing C. arvense. If no noxious, perennial weeds occur and primary tillage is done by soil inversion, an omission of stubble tillage can be taken into consideration.     

Soil management by shallow mouldboard ploughing in The Netherlands

The structure of the soil in the arable layer is controlled by tillage, soil biota activities and weathering, whereas the structure below this layer is mainly the result of the activities of soil biota. Organic farmers tend to minimise the depth of the main tillage operation to encourage soil biota to create a soil structure with continuous biopores and a well crumbled topsoil. The best main tillage operation for preventive weed control, especially important in organic farming, is mouldboard ploughing. The shallow ploughing experiments described in this paper were conducted to ascertain the minimum ploughing depth for an ecologically accountable, sustainable tillage system with good weed control, good land qualities (in terms of workable days, aeration and soil moisture conditions) and finally with good yields. The “ecoplough” used for shallow ploughing was developed by Rumptstad Industries to meet the requirements of relatively shallow ploughing with good soil inversion for weed control. The plough has seven or eight bottoms for ploughing depths of 0.12–0.20 m, a working width of 2.1 m and a working speed of 1.7 m s⁻¹. Its width is such that the tractor with wide low-pressure tyres runs on top of the land.

After using the plough for 6 years on Luvisols (>200 gkg⁻¹<2 μm) in the IJsselmeer polders and on Luvisols (120–160 gkg⁻¹<2 μm) in polders near the northern coast of The Netherlands, it was found that compared with conventional ploughing, shallow ploughing required less energy and labour and produced a relatively smooth surface. The latter facilitates the preparation of a seedbed consisting of relatively fine, strong, stable and moist aggregates. Organic matter, soil biota and nutrients were concentrated higher in the profile, influencing the workability of the soil, the growth of weeds and the growth of crops. Most of the yields were similar to yields after conventional ploughing, but weed populations increased when ploughing depth was <0.2 m. It was concluded that for organic farming on “active” soils (soils subject to shrink/swell with >200 g kg⁻¹<2 μm), shallow ploughing seems to be the best reduced tillage system. It has several advantages. The main factor determining the minimum ploughing depth is control of weeds, especially of perennials.     

Effects of ploughless tillage and straw incorporation on evaporation

The effects of ploughness tillage (stubble cultivation with a disc tiller or a spring tine cultivator, or with both in combination, replacing mouldboard ploughing) on evaporation were investigated using undisturbed soil lysimeters (height = 350 mm, diameter = 300 mm) excavated after spring cultivation in May from field experiments in eastern Sweden. The evaporation process was measured on ploughed and unploughed soil lysimeters, both with or without precipitation and with or without a seedbed. The effects on evaporation of incorporating crop residues with or without precipitation into a ploughed seedbed were also measured. The results from a heavy clay and from a silty clay loam showed that both ploughless tillage and incorporated straw reduced cumulative evaporation. The water-conserving effect was greater in irrigated treatments. The positive effect on water conservation was also greater on the silty clay loam than on the heavy clay. The soil structural changes brought about by ploughless tillage in layers under the seedbed acted to reduce the rate of evaporation from soil.     

Long-term experiments with different depths of mouldboard ploughing in Sweden

With the main objective to produce a basis for advice to farmers concerning optimal ploughing depth under various conditions, a series of field experiments were initiated throughout Sweden. At 19 sites on various soils (clay content 72–521 g kg⁻¹, organic matter content 21–89 g kg⁻¹) mouldboard ploughing to about 15, 22 and 28 cm depth was repeated annually for up to 17 years. The total number of location-years was 241. Traditional farming had previously been practised at the sites, including annual mouldboard ploughing to 20–25 cm depth. Spring-sown barley (Hordeum vulgare L.) and oats (Avena sativa L.) were the most frequent crops but many other crops were grown less frequently. Crop residues were generally returned to the soil; straw was chopped at harvest. Post-emergence herbicides were regularly used, generally resulting in an adequate control of annual weeds. However, the control of perennial weeds, particularly couch grass (Elymus repens L. Gould) was often inadequate. At ploughing depths of 22 and 28 cm, the mean crop yields were 2% and 3%, respectively, higher than at 15 cm. However, the results varied considerably between sites. In soils with a high silt content, the shallowest ploughing resulted in up to 10% higher yield than deeper ploughing, provided the control of perennial weeds was adequate. The main reason seemed to be improved structural stability in the surface soil because the concentration of organic matter in this layer became higher the shallower the ploughing. In clay soils with relatively stable structure, as well as in sandy soils, the deepest ploughing resulted in the highest yields, probably because of the deeper loosening. At sites where perennial weeds imposed problems, the weed control was better the deeper the ploughing, sometimes increasing the relative yield after deeper ploughing by several percent as compared with shallow ploughing. Most of this effect was obtained already at the intermediate ploughing depth. The results led to the following conclusions for Swedish agriculture. It may be profitable to plough sandy soils annually as deep as 30 cm, coarse sandy soils perhaps even deeper. In clay and clay loam soils, ploughing deeper than 20–25 cm generally cannot be recommended. In silty soils with an unstable structure, mouldboard ploughing, if any, should be shallow (≤15 cm), and perennial weeds should be controlled by other methods.     

Influence of rotation and tillage on forage maize productivity,weed species,and soil quality of a fine sandy loam in the cool–humid climate of Atlantic Canada

Reduced tillage systems may be an option to allow rapid crop establishment in areas constrained by a short growing season, but such methods need to be adapted to soil tillage requirement and crop establishment needs. Rotation and tillage studies were conducted during a 6-year period on a fine sandy loam (Podzol) with silage maize (Zea mays L.) under the cool, humid climate, and relatively short growing season of Prince Edward Island, Atlantic Canada. The objective was to compare a continuous maize rotation with a maize–barley (Hordeum vulgare L.) rotation, using both no-tillage and conventional mouldboard ploughing for the maize, and to evaluate treatment effects on maize growth and productivity, weed populations, and soil quality. Plant population and maize yield were not consistently influenced by the tillage or rotation treatments. Mean maize yield ranged from 7.2 to 7.7 Mg ha⁻¹. An increasing density of weeds over the 6-year period, especially perennial species, was evident under no-tillage, compared to mouldboard ploughing. Except for slight changes in soil pH, spatial variation in extractable soil P, and a higher level of organic C and labile forms of C (microbial biomass and mineralizable C), soil chemical quality was similar among treatments. An apparent decline in soil physical quality, as indicated by a reduction in macro-porosity volume and increase in soil penetration resistance below the 8 cm soil depth, was evident under the no-tillage at the end of the 6-year period. However, macro-pore continuity was less affected by a reduction in tillage, while field measurements of soil hydraulic conductivity increased under no-tillage compared to ploughing. The latter result may be related to the observed increase in earthworm population where tillage was reduced. Use of rotational tillage resulted in an intermediate soil physical condition between continuous no-tillage and ploughing. Overall, no-tillage appears a promising strategy to facilitate a fast and early establishment of maize on sandy loam soils in Atlantic Canada, but some ongoing monitoring of the soil physical condition would be required.     

Effects of reduced tillage and liming on microbial activity and soil properties in a weakly-structured soil

The effects of reduced tillage and lime on crop yield and soil physical and microbial properties were studied in a weakly-structured silty clay loam soil. Two autumn primary tillage practices were compared, mouldboard ploughing to 20–25 cm and cultivation to 12 cm. Seedbed preparation was carried out by several harrowing operations in the mouldboard ploughed treatment, and with a PTO-driven harrow in the same operation as sowing in the shallow cultivation treatment. The tillage treatments were applied alone or were combined with liming aimed at soil structural improvement. Lime was added as 6.5 Mg CaO ha⁻¹ before the start of the experiment and mixed into the top 12 cm of soil with a disc cultivator. A 4-year crop rotation was used: spring barley, spring oilseed rape, spring/winter wheat and oats, and all crops were compared each year. Crop residues were retained in the experiment and incorporated at cultivation. Aggregate stability was improved by the shallower tillage depth, probably as an effect of an increase in soil organic matter and a more active microbial biomass. Liming had little effect on soil structure variables but increased microbial activity to some extent. This was reflected in higher crop yields, especially when the shallow tillage depth was combined with liming. Penetration resistance in the seedbed subsoil was highest when mouldboard ploughing was carried out in plots without liming. Data were examined with principal component analyses, and the structures in the data were presented as scores and loading plots, which revealed groupings between samples and relationships between variables, respectively.     

A long-term comparison of ploughing, tine cultivation and direct drilling on the growth and yield of winter cereals and oilseed rape on clayey and silty soils

The effects of mouldboard ploughing, shallow tined cultivation and direct drilling on yields of winter wheat, barley, oats and oilseed rape were compared over 10 years. Three field experiments were conducted on two non-calcareous clays (stagnogleys) and a weakly structured silty soil (argillic brown earth). Two spring N levels were applied to the winter wheat plots on the clay soil in three years and to the winter barley plots on the silty soil in one year. This paper reports the soil bulk density and water content at sowing and the crop growth, yield components and yields obtained during the later years of the study: 1979–1984 on the clayey soils and 1981–1984 on the silty soil.

In the years when cereals were grown, differences in yield between cultivation treatments were small and inconsistent. Oilseed rape yielded significantly more after direct drilling than ploughing because of better establishment and uniformity of growth.

The success of continuous reduced tillage depended on both burning crop residues and good weed control.     

Traffic and tillage effects on soil conditions and crop growth on a swelling clay soil

Abstract. Trafficked and non-trafficked (12 m gantry) crop production systems, which had been maintained on an Evesham series 60% clay soil since 1986, were used again in 1993 during the cultivation and sowing of winter wheat. After a one year set-aside break, mouldboard ploughing, tine cultivation and rotary digging were compared. Measurements were made of tillage energy, soil tilth, cone penetration resistance, biological activity and crop performance, and on specific plots, soil density, seedbed tilth and water release characteristics. Despite the one year's set-aside break, the effect of the previously applied traffic treatments remained and resulted in a smaller specific plough resistance and tillage energy on the non-trafficked soil. Tine cultivator draught however was greater on the non-trafficked compared with the trafficked plots. The specific energy required for rotary digging on non-trafficked soil was similar to that required during the ploughing of similar plots. A measure of indefinite biotic activity indicated that this was apparently greater on the non-traffficked soil, while soil density was decreased by up to 18% in these conditions compared with the trafficked land. Average cone resistance over the depth range 0 to 0.5 m was 1.51 MPa on the trafficked, compared with 1.24 MPa on the non-trafficked soil. Cone resistance also tended to be greater after tine cultivation compared with that after ploughing. Water release curves were interpreted as showing more macropores within the topsoil of the non-trafficked compared with the trafficked plots. Tine cultivation on trafficked soil had more smaller pores than mouldboard plough cultivation. Winter wheat yield was increased by 25% (from 8 to 10 t/ha) on non-trafficked compared with trafficked soil.     

Effects of alternative tillage systems on soil quality and yield of spring cereals on silty clay loam and sandy loam soils in the cool, wet climate of central Norway

Tillage trials were established on a poorly drained silty loam overlying silty clay loam and on a freely drained sandy loam overlying medium sand, in 1988 and 1989, respectively. Autumn and spring ploughing and two ploughless systems were compared for 12–13 years, with three replications at each site. The ploughless treatments comprised deep versus shallow spring harrowing until 1999, and thereafter autumn plus spring harrowing versus spring harrowing only. In 6 years, treatments with and without fungal spraying of the cereal crops were included. In other years, fungicides were not used. Perennial weeds were controlled by herbicides as necessary, on nine occasions up until 2001. Average spring barley (Hordeum vulgare L.) and spring oat (Avena sativa L.) yields were similar with spring ploughing as with autumn ploughing at both sites. In treatments without ploughing, average yields on the silty loam over clay were 93% of those obtained with ploughing, and on the sandy loam over sand they were 81%. Smaller and non-significant yield differences were found between spring harrowing versus deep spring harrowing, and between autumn plus spring harrowing versus spring harrowing only. Fungal spraying increased yields markedly at both sites (25%), but there was no significant interaction between this treatment and tillage system. Oat was compared with barley in 2 years, with oat performing better under ploughless tillage. At both sites increases in penetrometer resistance occurred in the topsoil of unploughed treatments. These were considered particularly limiting on the sandy loam. On the silty loam there was an increase in surface horizon porosity in the absence of ploughing, which was associated with an increase in topsoil organic matter content. On this soil there was also a tendency toward lower penetrometer resistance at >30 cm depth on autumn plus spring harrowed soil than on ploughed soil, indicating that the plough pan may have diminished. This was supported by observations of greater earthworm activity on unploughed soil. Soil chemical analyses revealed that mineral N and plant-available P and K accumulated in the upper horizon under ploughless tillage. The percentage yields obtained in individual years with autumn as opposed to spring ploughing, were positively correlated with air temperature during 0–4 weeks after planting on the silty loam, and with precipitation during 0–12 weeks after planting on the sandy loam. In the case of yields obtained with spring harrowing only, relative to spring ploughing, positive correlations were found with 0–4 week temperature on both soil types, suggesting that low early season temperatures may limit yields under ploughless tillage.     

Type and time of autumn tillage with and without herbicides at reduced rates in southern Sweden: 1. Yields and weed quantity

Environmental as well as economic incentives support the use of integrated weed management (IWM) systems for crop production. In order to reduce the input of agrochemicals for weed control, it may be possible to combine reduced doses of herbicides with appropriate tillage strategies and still maintain acceptable weed population levels. The purpose of this study was to compare the efficiency of different tillage strategies, with and without herbicides at 50% of normal rates, on weed populations and crop yields. The influences of type and time of stubble cultivation, harrowing and mouldboard ploughing were followed in eight long-term field trials in southern Sweden from 1988 until the spring of 1994. The crop rotations were dominated by spring-sown oats (Avena sativa L.) and barley (Hordeum distichon L.). Although significant site-by-year-by-treatment interactions were found, certain trends in influences of tillage on weeds and yields were identified. Weed density and weight often decreased in the order: stubble cultivation without ploughing > solely ploughing > stubble cultivation succeeded by ploughing. Grain yields of oats and barley varied 6–50% among tillage systems and the highest yields were often obtained in plots where ploughing succeeded stubble cultivation. Effects of tillage on weeds or yields were usually not influenced by herbicide application. Although only subnormal herbicide rates were used, weed density and weight were mostly reduced by 70–90%, while yields increased by 10–20%. In the spring of 1994, 1 year after the last herbicide application, densities of annual broad-leaved weeds were 40–65% lower in plots previously treated by herbicides than in non-treated plots, and differences among tillage systems were still significant. This study shows the advantage of combining herbicides at reduced rates with stubble cultivation and ploughing.     

Effects of soil water content during primary tillage – laser measurements of soil surface changes

Soil water content during tillage can have a large impact on soil properties and tillage outcome. Measurement of soil relief in relation to fixed elevation points provides a non-destructive method of monitoring loosening/compacting processes during the year. The main objective of this study was to determine the effect of soil water content during primary tillage on soil physical properties.

The treatments included mouldboard and chisel ploughing of a clay soil on three occasions in the autumn, with gradually increasing water content (0.76, 0.91 and 1.01 × plastic limit). Soil surface height was measured by laser within a 0.64 m² area from fixed steel plates after each tillage occasion, and before and after seedbed preparation in the following spring. The measurements of surface height were compared with measurements of other soil physical properties, such as bulk density, saturated hydraulic conductivity and seedbed properties.

Tillage at the lowest water content (0.76 × plastic limit) produced the greatest proportion of small aggregates, and generally the most favourable soil conditions for crop growth. Soil loosening, as measured by increase in soil height during primary tillage, was highest for mouldboard ploughing and for tillage at the lowest water content. Differences between tillage treatments decreased with time, but were still significant after sowing in the spring. Natural consolidation during winter was smaller than the compaction during seedbed preparation in the spring. No significant differences in bulk density were found between treatments, and thus soil surface height was a more sensitive parameter than bulk density determined by core sampling to detect differences between treatments.

Late tillage under wet conditions caused a greater roughness of the soil surface and the seedbed base, which was also found in the traditional seedbed investigation. The effect of tillage time on seedbed properties also resulted in a lower number of emerged plants in later tillage treatments.

The laser measurements were effective for studying changes in soil structure over time. The results emphasize the need to determine changes in soil physical properties for different tillage systems over time in order to model soil processes.     

A comparison between seasonal changes in soil water storage and penetration resistance under conventional and conservation tillage systems in Aragón

Low and extremely variable precipitations limit dryland crop production in the semi-arid areas of Aragón (NE Spain). These areas are also affected by high annual rates of topsoil losses by both wind and water erosion. A long-term experiment to determine the feasibility of conservation tillage in the main winter barley production areas of Aragón was initiated in 1989 at four locations, three on loam to silt loam soils (Xerollic Calciorthid) and one on a silty clay loam (Fluventic Ustochrept), receiving between 300 and 600 mm of average annual rainfall. In this study, we compared, under both continuous cropping and cereal-fallow rotation, the effects of conventional tillage (mouldboard plough) and two conservation tillage systems, reduced tillage (chisel plough) and no-tillage, on soil water content and penetration resistance during the first two growing seasons. Whereas reduced and conventionally tilled treatments generally had similar soil water content during the experimental period, the effects of no-tillage were inconsistent. No-tilled plots had from 26% less to 17% more stored soil water (0–80 cm) than conventional tilled plots at the beginning of the growing season. In contrast to the conventional and reduced tillage treatments, penetration resistances were between 2 and 4 MPa after sowing in most of the plough layer (0–40 cm) under no-tillage at all sites. Fallow efficiencies in moisture storage in the cereal-fallow rotation, when compared with the continuous cropping system, ranged from −8.7 to 12%. The highest efficiencies were recorded when the rainfall in the months close to primary tillage exceeded 100 mm. Since this event is very unlikely, long fallowing (9–10 months) appears to be an inefficient practice for water conservation under both conventional and conservation management. Our results suggest that, up to now, only reduced tillage could replace conventional tillage without adverse effects on soil water content and penetration resistance in the dryland cereal-growing areas of Aragón.     

Residue cover,soil structure,weed infestation and spring cereal yields as affected by tillage and straw management on three soils in Norway

Four field trials (spring wheat and oats) were conducted (one on clay soil, one on loam soil and two on silt soil) for three years in important cereal growing districts, to investigate the influence of tillage regimes (ploughing versus reduced tillage in either autumn or spring) and straw management (removed and retained) on plant residue amounts, weed populations, soil structural parameters and cereal yields. The effect of tillage on soil structure varied, mainly due to the short trial period. In general, the amount of small soil aggregates increased with tillage intensity. Reduced soil tillage, and in some cases spring ploughing, gave significantly higher aggregate stability than autumn ploughing, thus providing protection against erosion. However, decreasing tillage intensity increased the amounts of weeds, particularly of Poa annua on silt soil. Straw treatment only slightly affected yields, while effects of tillage varied between both year and location. Reduced tillage, compared to ploughing, gave only small yield differences on loam soil, while it was superior on clay soil and inferior on silt soil. Our results suggest that shallow spring ploughing is a good alternative to autumn ploughing, since it gave comparable yields, better protection against erosion and was nearly as effective against weeds.     

Characterization of soil physical properties and organic matter under long-term primary tillage in a humid climate

Chisel ploughing is considered to be a potential conservation tillage method to replace mouldboard ploughing for annual crops in the cool-humid climate of eastern Canada. To assess possible changes in some soil physical and biological properties due to differences in annual primary tillage, a study was conducted for 9 years in Prince Edward Island on a Tignish loam, a well-drained Podzoluvisol, to characterize several mouldboard and chisel ploughing systems (at 25 cm), under conditions of similar crop productivity. The influence of primary tillage on the degree of soil loosening, soil permeability, and both organic matter distribution throughout the soil profile and organic matter content in soil particle size fractions was determined. At the time of tillage, chisel ploughing provided a coarser soil macrostructure than mouldboard ploughing. Mouldboard ploughing increased soil loosening at the lower depth of the tillage zone compared to chisel ploughing. These transient differences between primary tillage treatments had little effect on overall soil profile permeability and hydraulic properties of the tilled/non-tilled interface at the 15–30 cm soil depth. Although soil microbial biomass, on a volume basis, was increased by 30% at the 0–10 cm soil depth under chisel ploughing, no differences were evident between tillage systems over the total tillage depth. Mouldboard ploughing increased total orgainc carbon by 43% at the 20–30 cm soil depth, and the carbon and nitrogen in the organic matter fraction ≤ 53 μm by 18–44% at the 10–30 cm soil depth, compared to chisel ploughing.     

Comparing soil physical properties from continuous conventional tillage with long‐term reduced tillage affected by one‐time inversion

In addition to various positive aspects, long‐term reduced tillage may cause disadvantages such as increased weed pressure and soil compaction. Thus, single inversion tillage is customarily used for overcoming these drawbacks; however, the effects on the enhanced soil functions are unknown. The main objective of this study was therefore to assess whether improved soil physical properties following long‐term reduced tillage remain after one‐time inversion tillage by mouldboard plough. The study was undertaken on a silt loam field in Lower Saxony, Germany. Since 1996, this field has been subdivided into three treatments; one was managed conventionally using a mouldboard plough (CT), while on the others a chisel plough (RT1) and a disc harrow (RT2) were employed. In October 2014, the entire field was mouldboard ploughed. The following year, four field campaigns were conducted to compare the soil physical properties of the continuously conventional tilled plot with those affected by one‐time inversion tillage (RT1 and RT2). Dry bulk density (DBD), saturated hydraulic conductivity (Ks) and infiltration rate [K(h)] were analysed in untrafficked and trafficked areas in each plot. There were clear differences between CT and RT. At all sampling dates, both RT plots had higher Ks and K(h) compared with CT. These differences also occurred to some extent on the trafficked areas. This suggests that improved soil hydraulic properties remained after one‐time inversion tillage of a long‐term reduced tilled field. Thus, one‐time inversion tillage may offer a suitable measure for overcoming some of the main disadvantages associated with long‐term reduced tillage, while preserving the positive effects on soil physical properties.     

Reduced tillage in temperate organic farming: implications for crop management and forage production

To promote conservation tillage in organic farming systems, weed control and ley removal within arable-ley rotations need to be optimized. A long-term field trial was thus established in Frick, Switzerland in 2002 on a clayey soil and with a mean precipitation of 1000 mm/year. The tillage experiment distinguished between conventional tillage with mouldboard ploughing (CT, 15 cm depth) and reduced tillage (RT), including a chisel plough (15 cm) and a stubble cleaner (5 cm). Results of a 2-year grass-clover ley (2006/2007) and silage maize (2008) are presented. Due to dry conditions, mean grass-clover yields were 25% higher in RT than in CT, indicating better water retention of RT soils. Clover cover and mineral contents of the fodder mixture were also higher in RT. The ley was successfully removed in autumn 2007 in RT plots, and a winter pea catch crop was sown before maize. In CT, ploughing took place in spring 2008. Maize yields were 34% higher in RT than in CT, despite a two- to three-fold higher but still tolerable weed infestation. Maize in RT plots benefited from an additional 61.5 kg of easily decomposable organic N/ha incorporated into the soil via the pea mulch. Measurement of arbuscular mycorrhizal colonization of maize roots indicated a similar mechanical disturbance of the topsoil through the reduced ley removal system compared with ploughing. It is suggested that RT is applicable in organic farming, even in arable-ley rotations, but long-term effects need further assessment.     

Implement and soil condition effects on tillage-induced erosion

Water, wind, or tillage-induced soil erosion can significantly degrade soil quality. Therefore, understanding soil displacement through tillage translocation is an important step toward developing tillage practices that do not degrade soil resources. Our primary objective was to determine the effects of soil condition (i.e. grassland stubble versus previously tilled soil), opening angle, and harrow speed on soil translocation. A second field study also conducted on a Lixisol but only in the stubble field, quantified displacement effects of mouldboard ploughing. The field studies were located 12 km South of Évora, Portugal. Soil displacement or translocation after each tillage operation in both studies was measured using aluminium cubes with a side length of 15 mm as ‘tracers’. Offset angles for the harrow disk were 20°, 44° and 59°; tractor velocities ranged from 1.9 to 7.0 km h⁻¹ and tillage depth ranged from 4 to 11 cm. The depth of mouldboard ploughing was approximately 40 cm with a wheel speed of 3.7 km h⁻¹. The translocation coefficients for the two implements were very different averaging 770 kg m⁻¹ for the mouldboard plough and ranging from 9 to 333 kg m⁻¹ for the harrow disk. This shows that the mouldboard plough was more erosive than the harrow disk in these studies. All three variables (soil condition, opening angle, and tillage velocity) were critical factors affecting the translocation coefficient for the harrow disk. Displacement distances were the largest for compacted soils (stubble field), with higher opening or offset angles, and at higher velocities. The results also showed significant correlation for (a) mean soil displacement in the direction of tillage and the slope gradient and (b) soil transport coefficient and the opening angle. Our results can be used to predict the transport coefficient (a potential soil quality indicator for tillage erosion) for the harrow disk, provided tillage depth, opening angle, and tool operating speed are known.     

Direct drilling and soil loosening for spring cereals on a fine sandy loam in Atlantic Canada

Changes in soil structure and properties, plant growth and diseases and agronomic aspects were determined, after 3 years, on a Charlottetown fine sandy loam, an Orthic Podzol with a perhumid soil moisture regime, subjected to three tillage systems for spring cereals. The tillage systems consisted of direct drilling, soil loosening with a “paraplow” followed by direct drilling and mouldboard ploughing.

Rate of plant growth and other crop measurements were not changed by the tillage systems, except for the depth of seeding. Direct drilling reduced the accumulation of N and K in the plant, and reduced grain N, compared with mouldboard ploughing. Soil loosening prior to direct drilling prevented the decline in N and K accumulation, and increased grain yield and N content, in comparison with mouldboard ploughing. Direct drilling caused changes in soil macro-aggregation and reduced the evaporation rate, and increased microbial biomass C and N, total organic C and N and extractable ions at the soil surface (0–5 cm), compared with mouldboard ploughing. In addition, earthworm numbers were increased under direct drilling. Root lesion and spiral nematodes were not influenced by tillage differences.

Soil loosening prior to direct drilling alleviated the significant reductions in soil macroporosity, and prevented the increase in soil bulk density, soil strength and percentage water-filled pore space (%WFPS) associated with direct drilling alone. Although soil permeability was optimum under direct drilling alone, the relative increase in %WFPS and reduction in soil aeration were associated with a concomitant increase in common root rot.     

Does shifting from conventional to zero tillage in combination with a cover crop offers opportunities for silage maize cultivation in Flanders?

Tillage is an important agricultural practice, influencing the physical, chemical and biological soil characteristics. In this paper the influence of various tillage systems combined with or without a cover crop under different nitrogen fertilization levels on silage maize yield and soil fertility was investigated. Based on a field trial in Bottelare (Belgium), during the period 2007–2015, it was concluded that for each tillage system higher nitrogen levels resulted in a higher yield. In addition, the highest yield was achieved for the conventional tillage system, the yield gain for mouldboard ploughing varied between 13% (2015) and 71% (2012) compared to zero tillage. In case reduced tillage was adopted, the yield loss compared to mouldboard ploughing varied between 6% (2013 and 2015) and 24% (2012). Furthermore, it seemed that the accumulated temperature during the growing season and rainfall around flowering were decisive in determining maize yield. Additionally, rainfall in the period 60 days post sowing was significantly negatively correlated with the yield from the zero tillage plots, whereas in case tillage was adopted no correlations with rainfall 60 days post sowing were detected. Concerning the soil organic carbon content and the amount of earthworms, no clear trends could be observed. Zero tillage resulted in high weed pressure and caused soil compaction. So, in this trial, under humid conditions, the less labor intensive zero tillage system did not result in competitive maize yields. In conclusion, reduced tillage methods offer opportunities for maize cultivation in Belgium. This method of farming resulted in a lower yield, however, the difference with mouldboard ploughing was not significant. Therefore, adopting a reduced tillage system can be seen as a valid alternative for ploughing as this tillage system ensures a sustainable environment.