Optimization of microwave-assisted extraction of rice bran protein and its hydrolysates properties

Microwave-assisted extraction (MAE) was applied for extracting rice bran protein with a response surface methodology (RSM). The optimal condition was 1000 W of microwave power, 90 s of extraction time, and a solid to liquid ratio of 0.89 g rice bran/10 mL of distilled water. The protein yield of MAE was higher than that of alkaline extraction (ALK) by about 1.54-fold (P < 0.05), while the protein digestibility was similar. The protein hydrolysates (PHs) with at different degrees of hydrolysis (DH) (5.04, 10.37 and 15.04%) were produced by alcalase. The molecular weight (MW) of the rice bran protein concentrates (RBPC) and the PHs ranged between <11 kDa and 100 kDa. The excessive enzymatic hydrolysis resulted in a negative effect on water and oil absorption capacities. The PHs with DH15.04% acted as the strongest DPPH radical scavenger, ferric reducing agent, and also metal ion chelator (P < 0.05). However, a DH of 5.04% was sufficient for improving the functional properties of RBPC, especially foam ability and the emulsion activity index. This study suggests that the desirable properties of rice bran protein can be controlled with enzymatic modification.     

β-Glucan extraction from bran of hull-less barley by accelerated solvent extraction combined with response surface methodology

The objective of this study was to explore optimal extraction technology of β-glucan from bran of hull-less barley (Qingke in Chinese), and provide scientific basis for industrialization of β-glucan extraction from a commodity waste which is rich in β-glucan. β-Glucan extraction from bran of hull-less barley was performed with an accelerated solvent extraction (ASE) technique and compared with ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), and reflux extraction. The best combination of extraction parameters was obtained through response surface methodology (RSM) with a three-variable-three-level Box-Behnken design (BBD). The optimum extraction parameters were as follow: extraction time for 9 min, extraction temperature at 70 °C, number of cycles at 4, and extraction pressure at 10 MPa. Under these conditions, the experimental extraction yield of β-glucan was 16.39 ± 0.3%, which agreed closely with the predicted value (16.33%). Compared with other extraction methods, ASE produced much higher β-glucan and more environmentally friendly extraction and solvent systems, less extraction discrimination and shorter time, and could be useful to the development of industrial extraction processes.     

Optimization of the ultrasound-assisted extraction of tryptophan and its derivatives from rice (Oryza sativa) grains through a response surface methodology

An analytical ultrasound-assisted extraction (UAE) technique has been optimized and validated for the extraction of tryptophan and its derivatives from rice grains. A Box–Behnken design in conjunction with a response surface methodology based on six factors and three levels was used to evaluate the effects of the studied factors prior to optimizing the UAE conditions. The significant (p < 0.05) response surface models with high coefficients of determination were fitted to the experimental data. The most significant (p < 0.0001) effect is the solvent-to-sample ratio while quadratic effects caused by temperature and solvent-to-sample ratio were of moderate importance (p < 0.05). The optimal UAE conditions were as follows: extraction time of 5 min, ultrasound amplitude of 30%, cycle of 0.7 s⁻¹, extraction temperature of 30 °C, 8% methanol in water as the extraction solvent at pH 3 and a solvent/solid ratio 5:1. The method validation ensured that appropriate values were obtained for the LOD, LOQ, precision and recovery. Furthermore, the method was successfully applied to the analysis of a number of rice samples of different varieties. It was demonstrated that this particular UAE method is an interesting tool for the determination of tryptophan and tryptophan derivatives in rice grain samples.     

Optimization of the β-glucan extraction conditions from different waxy barley cultivars

The purpose of this work is to provide a complete study of the influence of several operational parameters on the aqueous extraction of β-glucan from barley, and to find an optimal combination of factors that maximize the extraction yield. Temperature, pH, extraction time, particle size, stirring rate and solvent:flour ratio were identified as the critical factors affecting the extraction process. Preliminary experiments were useful to set the extraction temperature at 55 °C (maximum extractability of β-glucan below gelatinization temperature of starch), and pH close to neutrality. In order to determine the optimal combination of the other four factors, a Taguchi experimental design approach was used: four variables (three levels) in L₉ orthogonal array. Nine different trials were conducted in duplicate for two different waxy barley cultivars: D24 (hulled; 6.02% β-glucan) and H13 (hulless; 4.64% β-glucan). The optimal conditions obtained from the signal to noise ratio analysis were: particle size, 100 μm; solvent:flour ratio equal to 5; stirring rate, 1000 rpm and extraction time, 3 h. The confirmatory experiment conducted with the optimal conditions provided an extraction yield of 73.4 ± 1.2% for D24 and 62.3 ± 1.8% for H13, corresponding to the maximum and showing that these conditions are valid regardless the composition of the used barley.     

Optimization of extraction techniques and quantification of Betulinic Acid (BA) by RP-HPLC method from Ancistrocladus heyneanus Wall. Ex Grah.

Simple, cost effective, quick and sustainable technique was investigated for determining Betulinic acid (BA) from samples of Ancistrocladus heyneanus. The methods comprised of continuous shaking, Soxhlet, ultra sonication and microwave assisted extraction techniques. RP-HPLC technique was used to quantify BA from varied samples and confirmation of the samples was done using TLC, FT-IR and FT-Raman methods. The study also evaluated productivity of operational parameters such as solvent composition and extraction time for three distinctive parts of the plant (green leaves, brown leaves and stem). Brown leaves showed response to continuous shaking extraction and ultrasonic extraction techniques with 95% Aq. MeOH as a good extraction solvent. BA was detected and quantified in continuous shaking method with 15, 30 and 45 min of exposure time. Comparison of 6 min with 12 min of ultra sonication, showed longer sonication diminished extraction efficiencies. Concluding, brown leaves in 95% MeOH and ultrasonic extraction technique to be the fastest, easiest and best method for detection and screening of BA from A. heyneanus.     

Extraction of Cinnamomum longepaniculatum deciduous leaves essential oil using solvent-free microwave extraction: Process optimization and quality evaluation

The optimal process conditions for solvent-free microwave extraction(SFME) of essential oils from Cinnamomum longepaniculatum deciduous leaves after moisture conditioning were established by response surface methodology(RSM). A Box-Behnken design(BBD) was applied to evaluate the effects of three independent variables: moisture content(A: 54%–74%), microwave power(B: 300–500 W) and microwave time(C: 20–40 min), on the extraction yield of essential oil. The compounds of the essential oils obtained...     

The effect of different extraction techniques on extraction yield, total phenolic, and anti-radical capacity of extracts from Pinus radiata Bark

The performance of four techniques, conventional maceration, Soxhlet extraction, microwave assisted extraction (MAE), and ultrasound assisted extraction (UAE), for extraction of Pinus radiata bark, in one and several stages, were evaluated. For each technique, the mass extracted (g extract/g bark), total phenols (by Folin-Cicalteau), and tannin (by precipitation) concentration and anti-radical capacity (diphenyl-picrylhydrazyl, DPPH) were quantified. In one stage, the extracted mass increased in the following order: maceration < UAE < MAE < Soxhlet (p < 0.05). The total phenols and tannin levels were also higher with the Soxhlet technique. With additional extraction stages, only the samples produced with MAE and UAE techniques improved their parameters. Additionally, MAE extracts presented a higher anti-radical capacity than does Soxhlet and Pycnogenol^® extracts. Therefore, MAE was a simple and rapid method that was useful for extraction of P. radiata bark. Scanning electron micrographs (SEM) provided evidence of the mechanical effects on cell walls, mainly evidenced by cell destruction produced by Soxhlet, MAE, and UAE on the bark. In contrast, maceration only results in slightly ruptured cell pores, which could explain its low extraction yield.     

Rice spikelet rot disease in China - 1. Characterization of fungi associated with the disease

Rice spikelet rot disease (SRD) is an emerging disease of rice panicle in China, which affects both rice yield and grain quality. Four fungal pathogens were isolated from diseased rice grains. Morphological observation, biological testing and molecular characterization led to identify these fungi as Fusarium proliferatum, Bipolaris australiensis, Curvularia lunata and Alternaria tenuis. The four fungi can grow from 10 °C to 40 °C, and from pH 5 to pH 10. The most suitable temperature range is 25 °C-30 °C, however the optimal pH for sporulation of these fungi varies greatly. The four fungi can grow on media supplemented with different carbon and nitrogen sources. These differences in carbon and nitrogen requirements suggest differences in trophism, and have large effects on hyphal growth and spore production. The results suggest that rice SRD is caused by various fungi with diverse physiological characteristics.     

Microwave-Assisted Extraction of Phlorotannins from Fucus vesiculosus

Microwave-assisted extraction (MAE) was carried out to maximize the extraction of phlorotannins from Fucus vesiculosus using a hydroethanolic mixture as a solvent, as an alternative to the conventional method with a hydroacetonic mixture. Optimal MAE conditions were set as ethanol concentration of 57% (v/v), temperature of 75 °C, and time of 5 min, which allowed a similar recovery of phlorotannins from the macroalgae compared to the conventional extraction. While the phlorotannins richness of the conventional extract was slightly superior to that of MAE (11.1 ± 1.3 vs. 9.8 ± 1.8 mg PGE/g DW_extract), both extracts presented identical phlorotannins constituents, which included, among others, tetrafucol, pentafucol, hexafucol, and heptafucol structures. In addition, MAE showed a moderate capacity to scavenge ABTS^•+ (IC₅₀ of 96.0 ± 3.4 µg/mL) and to inhibit the activity of xanthine oxidase (IC₅₀ of 23.1 ± 3.4 µg/mL) and a superior ability to control the activity of the key metabolic enzyme α-glucosidase compared to the pharmaceutical drug acarbose.     

Evaluation of Ultrasound,Microwave, Ultrasound–Microwave,Hydrothermal and High Pressure Assisted Extraction Technologies for the Recovery of Phytochemicals and Antioxidants from Brown Macroalgae

This study aims to explore novel extraction technologies (ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), ultrasound–microwave-assisted extraction (UMAE), hydrothermal-assisted extraction (HAE) and high-pressure-assisted extraction (HPAE)) and extraction time post-treatment (0 and 24 h) for the recovery of phytochemicals and associated antioxidant properties from Fucus vesiculosus and Pelvetia canaliculata. When using fixed extraction conditions (solvent: 50% ethanol; extraction time: 10 min; algae/solvent ratio: 1/10) for all the novel technologies, UAE generated extracts with the highest phytochemical contents from both macroalgae. The highest yields of compounds extracted from F. vesiculosus using UAE were: total phenolic content (445.0 ± 4.6 mg gallic acid equivalents/g), total phlorotannin content (362.9 ± 3.7 mg phloroglucinol equivalents/g), total flavonoid content (286.3 ± 7.8 mg quercetin equivalents/g) and total tannin content (189.1 ± 4.4 mg catechin equivalents/g). In the case of the antioxidant activities, the highest DPPH activities were achieved by UAE and UMAE from both macroalgae, while no clear pattern was recorded in the case of FRAP activities. The highest DPPH scavenging activities (112.5 ± 0.7 mg trolox equivalents/g) and FRAP activities (284.8 ± 2.2 mg trolox equivalents/g) were achieved from F. vesiculosus. Following the extraction treatment, an additional storage post-extraction (24 h) did not improve the yields of phytochemicals or antioxidant properties of the extracts.     

Effects of visible light irradiation on the oxidative stability in rice bran

Raw rice bran was treated with or without visible light exposure at room temperature or stored at 40 °C in the dark for 10 days and rice bran oil (RBO) was recovered from each rice bran. Headspace oxygen content from rice bran and conjugated dienoic acid (CDA) value, acid value, content of γ-oryzanol, and fluorescence intensity in RBO were analyzed to determine the effects of visible light on the oxidative stability in rice bran. Headspace oxygen content in visible light irradiated rice bran (RBL) decreased by 12.8% for 10 days while those in the dark (RBD) and stored at 40 °C (RBT) decreased by 5.87 and 5.35%, respectively, implying visible light irradiation accelerates the consumption of oxygen. CDA values in RBO from RBL were significantly higher than those in RBO from RBD and RBT (p < 0.05). However, acid values in RBO were not significantly different among samples (p > 0.05). Both γ-oryzanol content and fluorescence intensity in RBO from RBL were significantly lower than those in RBO from RBD and RBT (p < 0.05). Fluorescence intensity, which is related to the content of chlorophylls, decreased in samples under light only, implying that chlorophyll photosensitization may play important roles in the acceleration of lipid oxidation in rice bran.     

Effect of high temperature stress during ripening on the accumulation of key storage compounds among Japanese highly palatable rice cultivars

High temperature stress during ripening increases the frequency of chalky grains, resulting in a lower market value for rice (Oryza sativa L.). Changes in starch properties and the accumulation pattern of storage proteins are proposed to be related to the occurrence of chalky grains. This study investigated changes in the accumulation of key storage compounds in the grains of Japanese highly palatable rice cultivars, subjected to high temperature stress when grown in a growth chamber and the field. The 13 kDa prolamin content was significantly reduced in a highly heat-sensitive cultivar, Tsukushiroman, whereas the 13 kDa prolamin content was not affected in a heat-tolerant cultivar, Genkitsukushi, even in a high temperature chamber condition (31/26 °C day/night), when compared with the control chamber condition (26/21 °C day/night) for both genotypes. In addition, grains grown in field conditions revealed that severely chalky grains had less 13 kDa prolamin than perfect grains in all five genotypes. Changes in amylose content and the distribution of amylopectin chain lengths did not explain the difference in grain appearance both for chamber and field experiments. These results strongly suggest that physiological processes linked with the synthesis of 13 kDa prolamin are associated with grain appearance in Japanese highly palatable under high temperature stress.     

Profiling the effects of microwave-assisted and soxhlet extraction techniques on the physicochemical attributes of Moringa oleifera seed oil and proteins

There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum...     

The effect of simulated rat damage on irrigated rice yield and compensation

A field experiment was conducted to investigate the impact of simulated rat damage on grain yield in irrigated lowland rice in An Giang province, in the Mekong Delta of Vietnam. Rat damage was simulated by making a 45° cut at the base of the rice tillers about 3–5 cm above the soil surface. 0% (control), 5%, 10%, 25% and 50% of the tillers were removed at the tillering (25 days after sowing, DAS), panicle initiation (43 DAS), flowering (72 DAS) and ripening (87 DAS) stages. The total number of mature tillers, immature tillers and percent filled grains, the weight of 1000 grains and grain yields were recorded. The rice crop completely compensated by increased tillering and yield for tillers damaged up to 50% at the tillering stage. However, the damage and yield loss were highly variable. The ability of the rice crop to compensate at later stages progressively reduced. The implications for managing rat damage to rice crops are (1) rodent control activities should be applied before 10% of tillers are damaged at the tillering stage, and (2) a well balanced nitrogen supply during the tillering stage could potentially assist the rice plants to better compensate for rat damage.     

In vitro starch digestibility and pasting properties of germinated brown rice after hydrothermal treatments

Germinated brown rice (GBR) recently has received renewed attention due to its enhanced nutritional value. Pasting properties and in vitro starch digestibility of GBR were examined before and after hydrothermal treatments. Steeping in water (30 °C, 24 h) raised the moisture content and germination percentage of brown rice. Pasting viscosity was substantially decreased but gelatinization temperatures and enthalpy were decreased only marginally by germination (30 °C, 48 h). However, annealing (50 °C, 24 h) and heat-moisture treatment (100 °C, 1 h at 30% moisture) after germination resulted in increased pasting viscosity and gelatinization temperatures. The hydrothermal treatments, however, induced browning reactions to darken the flour of GBR. The digestibility of starch in brown rice was increased by germination. The contents of rapidly digestible starch (RDS), slowly digestible starch (SDS) and resistant starch (RS) in the cooked brown rice were 47.3%, 40.8%, and 11.9%, respectively, but changed to 57.7%, 39.1%, and 3.2%, respectively upon germination. The hydrothermal treatments, however, decreased the digestibility of starch in GBR. The heat-moisture treatment decreased the RDS content in GBR near to that of native brown rice. The digestibility and physical properties of brown rice can be controlled by germination and hydrothermal treatments.     

Changes of β-glucan physicochemical characteristics in frozen and freeze dried oat bran bread and porridge

The ability of oat foods to lower serum cholesterol and post-prandial blood glucose concentrations has been linked to the physicochemical properties of the bioactive component, mixed linkage β-glucan. Oat foods frequently need to be shipped or stored prior to analysis and β-glucan characteristics may change over time. Reductions in β-glucan solubility or molecular weight lead to lower viscosity development which decreases bioactivity. Impact of freezing and freeze drying conditions on the β-glucan physicochemical characteristics in oat bran bread and porridge were studied. Two in vitro digestibility methods were used to produce physiological extracts and the results were compared. The β-glucan molecular weight, solubility and viscosity for oat bread stored at room temperature were unchanged for 3 days, followed by a gradual decline in these parameters. The extract viscosity for bread decreased significantly after freezing at −80 °C and freeze drying after freezing at −18 and −80 °C, whereas freezing in liquid nitrogen did not significantly influence viscosity. Freezing of oat bran porridge did not affect extract viscosity, but freeze drying resulted in reduction of extract viscosity compared to the fresh porridge. Freezing and freeze drying did not dramatically affect the molecular weight or solubility of β-glucan in either product. The rapid visco analyzer was more effective and reliable for sample digestion than when physiological extraction was conducted in the shaking water bath. Generally, freezing at −18 °C or by submersion in liquid nitrogen maintained the physicochemical characteristics of β-glucan in food products either for commercial products or subsequent analysis.     

Response surface optimization of antioxidants extraction from chestnut (Castanea sativa) bur

The chestnut bur, a forest waste product from chestnut processing in the food industry, was studied as a potential source of natural antioxidants. Extractions were performed using aqueous solutions of methanol or ethanol. Experiments were planned according to an incomplete 3³ factorial design to study the influence of temperature (25-75 °C), time (30-120 min) and solvent concentration (50-90%) on extraction yield and on extract properties: total phenols content, antioxidant activity (using the FRAP, DPPH and ABTS methods) and average molecular weights. All dependent variables were influenced by temperature and solvent concentration whereas the influence of time was almost negligible. Using the response surface methodology the optimal extraction conditions were selected: the highest temperature assayed (75 °C), the lowest solvent concentration (50%) and an extraction time of 75 min for the methanolic extractions and of 30 min for the ethanolic ones. Under those conditions the values predicted for extraction yield and total phenols content were 18.95% and 36.32 g GAE/100 g extract for the methanolic extract and 17.95% and 26.11 g GAE/100 g extract for the ethanolic ones. Methanolic extracts showed superior total phenols content and antioxidant properties and slightly higher extraction yields than ethanolic extracts; however, ethanol is recommended for food applications due to its GRAS (Generally Recognized as Safe) qualification. Gallic acid esters of glucose, ellagic acid and small proportions of quercetin-3-β-d-glucoside, phenolic compounds with demonstrated antioxidant properties, were identified in chestnut bur extracts by RP-HPLC-ESI-TOF.     

Factors affecting sporulation of Pestalotiopsis disseminata causing grey blight disease of Persea bombycina Kost., the primary food plant of muga silkworm

The effect of inoculum concentrations, temperature, relative humidity (RH), incubation period and leaf age on sporulation of Pestalotiopsis disseminata and the development of grey blight disease on som (Persea bombycina Kost.) were studied in controlled environmental conditions. These factors had a significant role on spore germination and germ tube development of P. disseminata, the causal organism of the disease. The optimum inoculum concentration of the pathogen were found to be 1 × 10⁷ spores ml⁻¹ for maximum infection percentage. A nonlinear relationship was found between temperature and germination percentage of spores at a given relative humidity (RH). However, 25 °C (±2) temperature and 70% RH were the optimum parameters for better spore germination of the pathogen. Young leaves (leaf no. 1–4 from the top) were more susceptible for development of the diseases in a controlled environment than the older leaves. The germination of spores started at 8 h of incubation and gradually increased up to 20 h (maximum). The disease severity was favoured in the optimum range of temperature (25 ± 2 °C) and RH (70%) which had a combined effect. These epidemiological parameters could help in the management practices of the disease.     

Preparation, physicochemical and texture properties of texturized rice produce by Improved Extrusion Cooking Technology

Using broken rice and rice bran as raw material, texturized rice (TR) was prepared by Improved Extrusion Cooking Technology (IECT) in which gelatinization is formed by means of low temperature and high pressure. The expansion of extrudate was hardly changed so that TR showed similar texture properties and shape with polished rices. The effect of rice bran addition (0% and 4%) and IECT conditions, including feed moisture content (26.6-33.4%), screw speed (20.1-32.6 rpm) and shearing compression metering zone temperature (SCMT, 69.8-120.2 °C) on the physicochemical, texture and nutritional characteristics of TR, were investigated by response surface methodology using Central Composite Design. When the bran addition was 4%, feed moisture content was 30%, screw speed was 26.6 rpm, SCMT was 95 °C, prepared TR contained 16.61 ± 0.02% of total dietary fiber, 9.40 ± 0.04% of protein, 3.68 ± 0.03% of fat, 2.42 ± 0.02 μg/g of thiamin, 0.52 ± 0.01 μg/g of riboflavin and 16.07 ± 0.12 mg/100 g of γ-oryzanol (dry matter content). The content increase of TDF for TR was 15.81% and the content increases of nutrients for thiamin, riboflavin, and γ-oryzanol were 1.39 μg/g, 0.24 μg/g, and 8.99 mg/g dry matter content, respectively, compared with those of polished rice.     

Evaluation of CIMMYT conventional and synthetic spring wheat germplasm in rainfed sub-tropical environments. II. Grain yield components and physiological traits

CIMMYT hexaploid spring wheat (Triticum aestivum L.) germplasm has played a global role in assisting wheat improvement. This study evaluated four classes of CIMMYT germplasm (encompassing a total of 273 lines), along with 15 Australian cultivars (Oz lines) for grain yield, yield components and physiological traits in up to 27 environments in Australia's north-eastern region, where terminal drought frequently reduces grain yield and grain size.Broadly-adapted CIMMYT germplasm selected for grain yield had greater yield potential and improved performance under drought stress, being up to 5% greater yielding in High-yielding (mean yield 429 g m⁻²) and 4-10% greater yielding than adapted Oz lines in Low-yielding environments (mean yield 185 g m⁻²). Whilst maintaining statistically similar harvest index and spikes m⁻² compared to broadly-adapted Oz lines across all environments, sets of selected CIMMYT lines had greater canopy temperature depression (0.18-0.27 °C), dry weight stem⁻¹ (0.20-0.37 g), increased grains spike⁻¹ (0.8-3.4 grains), grain number m⁻² (ca. 20-800 grains), and maturity biomass (56-83 g m⁻²). Compared to selected Oz lines, broadly-adapted CIMMYT lines had a smaller reduction in Low compared to High-yielding environments for these traits, especially dry weight stem⁻¹, such that CIMMYT lines had ca. 25% and 10% greater dry weight stem⁻¹ than the Oz lines in Low- and High-yielding environment groups, respectively. Broadly-adapted CIMMYT germplasm also had slightly higher stem water soluble carbohydrate concentration at anthesis (ca. 6 mg g⁻¹), which contributed to their higher grain weight (ca. 0.5 mg grain⁻¹), and maintained an agronomically appropriate time to anthesis and plant height. Thus current CIMMYT germplasm should be useful donor sources of traits to enrich breeding programs targeting variable production environments where there is a high probability of water deficit during grain filling. However, as multiple traits were important, efficient introgression of these traits in breeding programs will be complex.