A preliminary report on decay and canker of Acacia richii caused by Inonotus rickii in China

An epidemic wood‐decaying fungus, Inonotus rickii, originating from South America, has spread to the Mediterranean area and southern China. We report the first observation of this fungus on Acacia richii in Panzhihua, southern China. It causes serious canker and decay on urban trees in the investigated area. In addition, phylogenetic analysis showed that the fungus from Panzhihua is closely related to isolates from Europe, South America, Mianyang and Hainan of China. Moreover, it was concluded that the isolates of the species previously reported from the USA do not belong to I. rickii.     

Efficacy of radio frequency treatment and its potential for control of sapstain and wood decay fungi on red oak,poplar, and southern yellow pine wood species

The effectiveness of radio frequency (RF) treatment in the control of wood decay fungi (Gloeophyllum trabeum, Ganoderma lucidum, and Irpex lacteus) and sapstain fungus (Ceratocystis fimbriata) in red oak (Quercus spp.), poplar (Populus alba), and southern yellow pine (Pinus spp.) was evaluated in the laboratory as an alternative to methyl bromide (MB) treatment. Wood samples (15.5 x 10 x 10 cm) were inoculated with fungi from a 7-day culture by dipping them to a depth of one face deep (2 cm) into inoculum and incubating them at 25°C for 14 days. Identical wood samples were left uninoculated as controls. Subsequent to incubation, the wood blocks were exposed to RF radiation in an industrial 40-kW dielectric oven at temperatures between 60° and 70°C for 2 min. The test fungi were recovered and reisolated from all of the control wood blocks but not from RF-treated wood blocks. RF treatment resulted in complete inhibition of the fungus in 98%-100% of the wood samples. Moisture content loss (≥1%) was noted after wood had been exposed to RF treatment. Moisture content may be an important factor to consider with RF treatments. RF treatment can, therefore, potentially provide an effective and rapid quarantine treatment as an alternative to MB fumigation for certain pathogen-wood combinations. This article reports the results of research only. Mention of a product does not constitute an endorsement or recommendation by USDA for its use.     

Dry weight loss of wood after the inoculation of Scots pine stumps with Phlebiopsis gigantea

Artificial inoculation of stumps with Phlebiopsis gigantea (preparation‘PgIBL’) against Heterobasidion annosum in Scots pine (Pinus sylvestris) stands on former agricultural lands in Poland is being performed throughout the year. The practical efficiency of the biological control appears to be influenced by the moisture content in stumps and roots. In experiment 1, dry weight loss of wood 3 months and 6 months after P. gigantea inoculation in laboratory was investigated in the stumps after salvage cutting (felling of dead and dying trees) and after thinning (routine cutting of trees) and compared with the decay of the artificially inoculated stumps under field conditions. It was found that 6 months after inoculation the dry weight loss of the samples was about 3%, 17% and 22%, respectively. In experiment 2, the decay of wood from horizontal roots collected after thinning, inoculated with P. gigantea in laboratory, was evaluated. Three months after the inoculation, the loss of dry weight wood was about 22–52%, depending on initial moisture of the roots.     

Fungal decay resistance of wood impregnated with parahalophenyl para-tolyl sulfonamides

Summary We are investigating wood decay biocides that are both effective in protecting wood from decay and more environmentally compatible than other biocides. A series of halophenyl sulfonamides were synthesized and characterized by infrared and neuclear magnetic resonance spectroscopy. Wood impregnated with these compounds was tested for resistance to decay as well as water leaching. Wood impregnated with para-iodophenyl or para-fluorophenyl para-tolyl sulfonamides resisted decay by brown- and white-rot fungi. For wood impregnated with para-iodophenyl para-tolyl sulfonamide, threshold retention with the brown-rot fungus Gloeophyllum trabeum was 9.1 mmol/ 100 g solution for unleached blocks. For leached blocks, weight loss was very high (24.6%), which indicated that threshold retention will be substantially higher than 9.1 mmol/100 g solution. With the white-rot fungus Coriolus versicolor, threshold retentions were 2.9 and 5.6 mmol/100 g solution, respectively, for unleached and leached blocks. Leaching of the blocks treated with the iodo compound slightly decreased resistance to decay by C. versicolor. For wood impregnated with parafluorophenyl para-tolyl sulfonamide, threshold retentions with both G. trabeum and C. versicolor were very close to 9.0 and 9.2 mmol/100 g solution, respectively, for leached and unleached blocks. Leaching had a little effect on resistance to decay by both fungi. Wood impregnated with parachlorophenyl or bromophenyl para-tolyl sulfonamide was ineffective in resisting decay by both fungi.     

The use of the green fluorescent protein as a biomarker for sapstain fungi

To understand wood colonization by sapstain fungi and their potential biocontrol agents, it is necessary to differentiate these organisms directly on their natural substrates. In the present study the feasibility of transforming with the green fluorescent protein (GFP), the sapstain fungus Ophiostoma piceae and a potential biocontrol agent Cartapip^®, an Ophiostoma piliferum albino strain was assessed. Transformants of the two fungal species were screened by polymerase chain reaction and Southern blot analyses. The GFP was expressed in spores, synnemata and mycelia of the transformants grown in artificial media or wood. The growth, pigmentation and wood colonization of the transformants were similar to that of the non‐transformants, suggesting that the presence of the gfp gene had no negative effect on the biology of the transformants. Using fluorescence and confocal microscopy, the GFP‐expressing fungi were easily differentiated from the wild‐type strains and other fungal species in wood, even 4 months after inoculation. The results show that the use of the GFP system is feasible to monitor Ophiostoma fungi in wood.     

Hymenoscyphus fraxineus can directly infect intact current‐year shoots of Fraxinus excelsior and artificially exposed leaf scars

Hymenoscyphus fraxineus, the causal agent of ash dieback, was inoculated onto intact, unwounded current‐year shoots and leaf scars of 4‐year‐old, potted Fraxinus excelsior seedlings. Pieces of ash wood colonized by the fungus were used as inoculum. Three of 25 (12%) of the inoculated intact shoots and nine of 25 (36%) of the inoculated leaf scars were infected by H. fraxineus and developed typical symptoms of ash dieback, including necrotic lesions on the shoot surface and wood discoloration as well as shoot and leaf wilting distal to the inoculation site. No symptoms occurred on control seedlings, which had been inoculated in the same way but with sterile wood pieces. Visible necrotic lesions on shoots and wood discoloration were statistically significantly longer in proximal than in distal direction from the inoculation site, a pattern which resembles symptoms after natural infection. The ash dieback pathogen was re‐isolated from nine of 12 (75%) of the symptomatic seedlings. These results provide indirect supportive evidence that the fungus infects shoots via leaves and shows that it is able, under experimental conditions using a massive mycelial inoculum, to directly infect intact, unwounded current‐year shoots of its main host in Europe.     

Immunological detection of decay in wood

Summary An enzyme-linked immunosorbent assay (ELISA) was used to detect and quantify Postia placenta (Fr.) M. Lars. et Lomb. in decaying wood. The fungus was detected as early as ten days after inoculation suggesting that ELISA may be effective in detecting early incipient decay. Decay-induced weight loss in P. placenta decayed spruce blocks was correlated with the absorbance values obtained in the ELISA reaction.     

Histological changes in the cell wall structure during wood decay by Trametes hirsuta and Trametes versicolor in neem (Azadirachta Indica A. Juss)

ABSTRACT

Structural alterations in the wood cell walls of neem inoculated with by Trametes hirsuta and T. versicolor were studied by microscopic methods. In vitro decayed wood showed extensive weight loss of test blocks (26.7 and 41.38% by T. versicolor and T. hirsuta, respectively) at the end of 3 months. Selective delignification in the initial phase followed by simultaneous removal of lignin was evident in test blocks inoculated with both the species. The separation of middle lamellae and patches of cellulosic polysaccharides stained blue with Astra blue in the delignified region of the fiber wall during early stages indicates selective mode of decay. In contrast, the occurrence of erosion troughs with characteristic U-notch in tangential sections is a characteristic feature of simultaneous rot that was apparent after 3 months of incubation. The decay pattern occurred concomitantly in all the xylem elements irrespective of general resistance pattern shown by vessel and axial parenchyma cells. At an advance stage, both species of Trametes showed formation of erosion channels along the microfibrils angle of cellulose which is considered as characteristics of soft rot decay type. The sharing of white rot and soft rot decay pattern by both the fungi suggest a phylogenetic link between both groups of fungi.     

Comparative study on the durability of heat-treated White Birch (Betula papyrifera) subjected to the attack of brown and white rot fungi

Abstract

The effect of heat treatment on decay resistance of white birch was evaluated for different incubation periods ranging from 2 to 12 weeks using three species of brown rot and one species of white rot fungus. The results of weight loss tests showed that the white rot fungus, Trametes versicolor, effectively degraded the untreated wood (73.5%). While the degradation of untreated wood by brown rot fungi species, Gloephyllum trabeum (11.6%) and Conifora puteana (6.2%), was considerably less compared to T. versicolor, the third brown rot fungi studied, Poria placenta, caused an appreciable degradation of the same species (52.4%). The results clearly showed that the heat treatment reduced the effect of fungi attack on white birch. Increasing the heat treatment temperature from 195 to 215°C resulted in reduction of weight loss, consequently, reduction in fungal attack. As an example, the weight loss reductions due to T. versicolor, P. placenta, G. trabeum and C. puteana attack was 62.2%, 71.3%, 89.6% and 100%, respectively, compared to the weight loss of untreated wood when it is heat treated at 215°C. Thus, these results confirmed that the heat treatment increased the biological resistance of white birch.     

Characterization of host–fungus interactions among wood decay fungi associated with Khaya senegalensis (Desr.) A. Juss (Meliaceae) in Singapore

Tree pruning creates wounds that are amenable for wood decay fungi colonization. To characterize the dynamic host–fungus interactions at this location in Senegal mahogany (Khaya senegalensis), in vitro and in vivo pathogenicity tests were conducted with wood decay fungi associated with this tropical tree species. Fomitiporella caryophylii, Hymenochaete murina and Phellinus noxius isolates were included in this experiment following their frequent isolation from Senegal mahogany pruning wounds. The evaluated isolates demonstrated unique host interactions in laboratory tests that suggest equally divergent prognoses for living Senegal mahoganies affected by these fungi. Although all evaluated fungal isolates successfully breached naturally induced reaction zones, P. noxius alone caused significant mass loss to incubated wood blocks. In addition, P. noxius caused extensive wood decay after inoculation in living hosts, successfully illustrating Koch's postulates for this host–fungus relationship. The wood decay ability, invasiveness and facultative parasitism demonstrated by P. noxius suggest its dominant role in wood decay columns below pruning wounds on living Senegal mahoganies. These results highlight the importance of characterizing specific host–fungus interactions and their implications for wood decay severity below pruning wounds in living trees.     

Interactions between Scytalidium species and brown- or white-rot basidiomycetes in birch wood

Summary Growth and subsequent decay by seven basidiomycetes in birch wood blocks was inhibited by three Scytalidium isolates. Scytalidium initially colonized the surface of the blocks and gradually overgrew the basidiomycetes. In individual wood blocks from 11 Scytalidium-basidiomycete paired treatment combinations, the basidiomycete was not inhibited throughout the entire wood block. These wood blocks demonstrated interspecific interactions and antagonism between the different fungi. The white-rot fungi responded to isolates of Scytalidium by occluding xylem cells with masses of hyphae, forming pseudosclerotial plates in the zone of initial interaction. Scytalidium appeared to gain access into portions of wood colonized by the basidiomycetes only after substantial decay had resulted by the wood decay fungus.     

Evaluation of Schizophyllum commune Fr. potential for biodegradation of lignin: A light microscopic analysis

Lignin biodegradation potential of Schizophyllum commune Fr. is studied by using sound wood blocks of Ailanthus excelsa, Azadirachta indica, Tectona grandis, Eucalyptus sp. and Leucaena leucocephala. Initially, in vitro wood decay test showed minor weight loss, but it became rapid after one month. After 120 days of incubation, weight loss was minimum in T. grandis (24.05%) whereas it was maximum in A. excelsa (34.44%). Treated test blocks were characterised by enlargement of pits on ray cell wall, formation of additional boreholes in rays, separation of fibres and cell wall thinning and formation of ‘U’-shape notches. Fungal hyphae moved through the xylem cell lumen, and intercellular spaces formed in response to separation of fibres. Hyphae traverse in adjacent cell through the cell wall pits or by making additional boreholes. In all the species studied, xylem fibres and parenchyma (axial and ray) cells were more susceptible while vessels were resistant to fungal attack. In advanced stage of decay, fibres and axial parenchyma lost their rigidity while vessel walls showed uneven thinning. In the tension wood, G-fibres remained unaffected initially but loosening and separation of gelatinous layer facilitated fungal action and showed similar pattern of cell wall deterioration. Among the wood of different species studied, Tectona was more resistant whereas Ailanthus was more susceptible to fungal attack.     

Impact of thermal modification on bioresistance of North American wood species,Pinus banksiana,Populus tremuloides,and Betula papyrifera,against wood-rotting basidiomycete fungi

In this study, the decay resistance of untreated and thermally modified jack pine (Pinus Banksiana), aspen (Populus tremuloides), and white birch (Betula Papyrifera) was evaluated. Wood specimens were exposed to laboratory decay resistance tests using the wood-rot fungi, Trametes. versicolor, Poria placenta, and Gloephyllum trabeum for 2–12 weeks of incubation.

The results indicated that, T. versicolor fungus was virulent against all the three untreated woods, B. papyrifera (73.9% weight loss), P. tremuloides (57.1% weight loss), and P. banksiana (43.5% weight loss). P. placenta fungus affected B. papyrifera (52.4% weight loss), P. banksiana (52.3% weight loss), and P. tremuloides (36.7% weight loss). G. trabeum fungus was virulent against P. banksiana (41.53% weight loss), but less active against B. papyrifera (11.6% weight loss) and P. tremuloides (21.9% weight loss).

It was found that the weight losses due to T. versicolor fungus activity were reduced for P. banksiana (1.5% weight loss) thermally modified at 210 °C, B. papyrifera (27.9% weight loss) at 215 °C, and P. tremuloides (9% weight loss) at 220 °C compared to the weight losses of their untreated counterparts. These correspond to 96.5%, 62.2% and 84.2% of decrease in weight loss, respectively. Similar results were obtained with G. trabeum fungus. On the contrary, thermal modification on the deterioration of P. banksiana (39.1% weight loss) by P. Placenta was affected less resulting in only 25.2% weight loss relative to untreated wood.     

Note sur l'aptitude lignivore du Lachnellula willkommii (Hartig) Dennis,agent du chancre du mélèze

Note on the wood destroying capacity of Lachnellula willkommii (Hartig) Dennis, the larch canker fungus. The wood destroying capacity of Lachnellula willkommii in larch was studied in vitro using a method based on loss of weight. Two species of larch and their hybrid were used. The behaviour of the fungus on sapwood and heartwood differed.     

Effects of high temperature kiln drying on the practical performances of Japanese cedar wood (Cryptomeria japonica) I: changes in hygroscopicity due to heating

The effect of heating on the hygroscopicity of Japanese cedar wood was investigated as a simple evaluation of thermal degradation in large-dimension timber being kiln-dried at high temperatures (>100°C). Small wood pieces were heated at 120°C in the absence of moisture (dry heating) and steamed at 60°, 90°, and 120°C with saturated water vapor over 2 weeks, and their equilibrium moisture contents (M) at 20°C and 60% relative humidity (RH) were compared with those of unheated samples. No significant change was induced by steaming at 60°C, while heating above 90°C caused loss in weight (WL) and reduction in M of wood. The effects of steaming were greater than those of dry heating at the same heating temperature. After extraction in water, the steamed wood showed additional WL and slight increase in M because of the loss of water-soluble decomposition residue. The M of heated wood decreased with increasing WL, and such a correlation became clearer after the extraction in water. On the basis of experimental correlation, the WL of local parts in large-dimension kiln-dried timber was evaluated from their M values. The results indicated that the thermal degradation of inner parts was greater than that of outer parts.     

Treatment of wounds on Acer rubrum with Trichoderma viride1

Wounds on 90 Acer rubrum trees were inoculated with Trichoderma viride in July and August 1973 to determine the effect of the fungus on the development of decay. The trees were 45 years old and 15 cm diam at 1.4 m aboveground. Each tree had 12 wounds, 1.4 cm in diam and 5 cm deep. After a year 28 trees were harvested and isolations were made from the discolored, and decayed wood associated with each wound. Trichoderma viride was reisolated from all wounds that were inoculated with it. Hymenomycetes were isolated frequently from decayed wood associated with wounds not inoculated with T. viride. No Hymenomycetes were isolated from wounds inoculated with T. viride.     

Persistence of some pine pathogens in coarse woody debris and cones in a Pinus pinea forest

The persistence of Sphaeropsis sapinea, Leptographium serpens and Heterobasidion annosum s.s. in artificially inoculated pine branch pieces (S. sapinea and L. serpens) and wood blocks (L. serpens and H. annosum s.s.) was investigated in order to discuss the alternative of leaving coarse woody debris in stands of Italian stone pine (Pinus pinea). Also, natural colonization by S. sapinea of pine cones of different ages was assessed. Methods used for inoculating branch pieces and wood blocks were highly effective for all fungi. Type of a forest stand in which branch pieces and wood blocks have been incubated did not affect the persistence of the pathogens in the inoculated samples. For branch pieces, the success of re-isolation of L. serpens dropped as the sample incubation time increased, while S. sapinea was always successfully (100%) re-isolated (even 12 months after the inoculation). L. serpens and H. annosum s.s. were re-isolated from most of the buried wood blocks (from more than 95% samples) up to 3 months following the inoculation. Of the observed P. pinea cones (in most cases, more than 2 years old), 74% were naturally infected byS. sapinea. All three investigated pathogens were able to survive in dead plant tissues for long periods of time (at least for several (3–12) months). The persistence of these pine-pathogenic species in dead plant material questions the feasibility of leaving coarse woody debris in managed Italian stone pine forests meant for landscape conservation and leisure activities.     

Role of Phialemonium curvatum as a potential biological control agent against a blue stain fungus on aspen

Ophiostoma crassivaginatum is the most important blue stain fungus on Populus tremuloides and causes considerable reduction in the value of the end product. The effect of a hyphomycetous fungus, Phialemonium curvatum, on the in vitro growth and wood chip colonization by O. crassivaginatum was studied. The in vitro growth of O. crassivaginatum was significantly inhibited when grown in dual culture or when treated with culture filtrate of P. curvatum. Ophiostoma crassivaginatum failed to colonize P. tremuloides wood chips when they were pre-inoculated with mycelial suspension of P. curvatum. The potential use of P. curvatum as a biological control agent against O. crassivaginatum is suggested.     

Genetic diversity in Nordic and Baltic populations of Chondrostereum purpureum: a potential herbicide biocontrol agent

We analysed genetic variation in the natural populations of a potential herbicide biocontrol agent, Chondrostereum purpureum, in Nordic and Baltic countries using random amplified microsatellite markers. The results showed high genetic diversity among the populations of this fungus, but almost a complete lack of local differentiation. The results implicate that any local strain from the area can be used as a biocontrol agent without a fear of introducing new genotypes to treatment areas.     

Low molecular weight silicic acid – inorganic compound complex as wood preservative

A new wood preservative containing low molecular weight and low-toxicity silicic acid (LWSA) was investigated. To prevent environmental pollution with the wood preservative, a silicic acid monomer aqueous solution (SAMS) or colloidal silicic acid solution (CSAS) was combined with various metal compounds or boric acid. Agents where SAMS or CSAS was combined with boric acid gave good protection against decay caused by the brown-rot fungus Fomitopsis palustris, the treated wood (Cryptomera japonica D. Don) specimens after the leaching test maintained a high resistance to decay. The leaching and decay tests revealed high quantities of chemicals leaching from wood treated with SAMS-metal agents. However, when wood was treated with SAMS-boric acid, there was little leaching of agent in either test. The mechanism of resistance of wood, which was treated with boric acid mixed with CSAS or SAMS, to the brown-rot fungus F. palustris were investigated. When the concentration of boric acid was high, mycelial growth was inhibited completely and no protein production was detected. When the amount of boric acid was low, the xylanase, mannase and cellulase activities were lower than with control wood powder. When powdery boric acid was combined with CSAS, it was considered that the treated woods have higher anti-weather properties than when boric acid-methanol solution was mixed with CSAS. The agent-preparation method adopted should be considered carefully after taking the treatment process and the intended use of the preservative-treated wood into account. Received 26 September 2000 This study was supported by a Grant-in-Aid (09460079) for Scientific Research from the Ministry of Education, Science, and Culture of Japan.