Fabrication of electrospun antimicrobial nanofibers containing metronidazole using nanospider technology

Nanospider technology as a modified electrospinning technique was used for the fabrication of electrospun nanofibers based on poly(vinyl alcohol) (PVA)/poly(ethylene oxide) (PEO) blend as drug delivery system (DDS) for metronidazole (MTZ) as an antimicrobial drug. Electrospun PVA/PEO/MTZ composite nanofibers were stabilized against disintegration in water by heating in oven at 110°C, or by soaking in isopropyl alcohol for 6 hrs. Incorporation of MTZ into electrospun nanofibers was confirmed by SEM, FT-IR spectra and TGA. The drug release results showed that the burst release was suppressed with stabilized electrospun nanofibers compared with non-stabilized ones. Electrospun PVA/PEO/MTZ composite nanofibers exhibited remarkable antimicrobial activity against Escherichia coli, Pseudomonas aeruginosa, Aspergillus niger, Penicillium notatum and Aspergillus flavus which varies with the species of the tested organisms.     

Flexible VOC sensors using conductive polymers and porous membranes for application to textiles

In order to fabricate textile-based flexible VOC sensors, two conductive polymers such as polyaniline and poly(3,4-ethylenedioxythiophene)-poly(styrene-sulfonate) (PEDOT:PSS) were used as VOC-sensing materials, and various porous organic membranes were used as base substrates on which the conductive polymers were coated. Electrical resistance change of conductive polymers by adsorption of VOCs was measured. Polyaniline showed better sensitivity than PEDOT:PSS. Porous high density polyethylene membrane exhibited the most stable signal reproducibility and dimensional stability of membrane itself. Even after covering with additional high density polyethylene membrane to protect conductive polyaniline inside, the stable signals were still obtained during repeated measurement.     

SPI/PEO blended electrospun martrix for wound healing

Conventional textile based wound dressing materials are cost effective and highly absorbent, but when used alone fails to provide optimal wound healing conditions like homeostasis, non-adherence, maintenance of a moist wound bed, etc. Electrospun polymer web meets the requirements outlined for wound healing, by their microfibrous structures provide suitable environment for wound healing apart from the function of polymers. In this study, blends of soy protein isolate (SPI) and poly(ethylene oxide) (PEO) nano fiber web was prepared by electro spinning process. The developed blended nano fiber web was subjected to SEM, FTIR to evaluate fiber size and functional properties respectively. The Moisture vapour transmission rate (MVTR) result shows the blended electrospun web gives suitable mosit environment over wound bed such as the MVTR is 2994 g/m²/day. The blended electrospun web gives positive result on antimicrobial activity. The effect of SPI/PEO blended electrospun web on wound healing was experimented with female wistar rats and the blended electrospun web shows excellent result on wound healing by the growth of new epithelium without any significant adverse reaction. Forming of SPI/PEO electrospun fiber was fulfilled many critical elements desirable in a wound material.     

Functionalization of graphene nanosheets and its dispersion in PMMA/PEO blend: Thermal,electrical, morphological and rheological analyses

Graphene nanoplatelet (GnP) was chemically functionalized by amine groups for improvement of compatibility in poly(methyl methacrylate) (PMMA)/poly(ethylene oxide) (PEO) blend. PMMA/PEO (90/10) nanocomposites with non-functionalized GnP and functionalized GnP (FGnP) were prepared by solution casting method. Successful grafting of amine groups on the GnP surface was confirmed by Fourier transform infrared (FT-IR) and X-ray diffraction (XRD) analysis. The Transmission electron microscopy (TEM) images showed that the dispersion state of FGnP was better than that of GnP in PMMA/PEO nanocomposites. The effects of FGnP and GnP on rheological, thermal and electrical properties of PMMA/PEO nanocomposites were investigated by various methods. The results indicated that the FGnP-based nanocomposites had higher storage modulus, glass transition temperature and thermal stability as compared to the GnP-based nanocomposites. The electrical conductivity of the nanocomposites with FGnP was better than that of GnP-based nanocomposites. The higher conductivity was attributed to homogeneous and well dispersion state of FGnP in PMMA/PEO nanocomposites.     

Conductive polymer-coated threads as electrical interconnects in e-textiles

An organic polymer electrical interconnect is demonstrated. The ionomer mixture poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS; 1:2.5, w:w) was cast onto silk fibers from a 50:50 (v:v) ethylene glycol solution by a dip-coating process. Dynamic mechanical analysis (DMA) results show that Young’s modulus and mechanical strength are maintained during the coating process from acidic solution (pH ∼1). DMA dynamic temperature scans reveal two new thermal transitions once PEDOT:PSS is applied to the silk fiber, and they are assigned to the glass transition temperature (59 °C) and melting point (146 °C) of the ionomer pair. Electrical conductivities of 8.5 S/cm were achieved with four cycles of the dip-coating process, only 10x less than Ag-coated thread control samples. SEM imaging of the PEDOT:PSS-coated fibers show slight texturing to the fibers due to the coating, as well as significant charging in the uncoated samples when compared to PEDOT:PSS-coated samples. The conductive fibers fabricated by this process were successfully applied as electrical interconnects in flexible, fully functional 555 timer circuits stitched into fabric substrates.     

Composites of polyvinyl alcohol and carbon nanotubes decorated with silver nanoparticles

A simple method to decorate carbon nanotubes (CNTs) with silver nanoparticles was developed to enhance the electrical conductivity of CNTs. The acid-treated CNTs were suspended in the silver acetate solution, ammonia solution was then added, and the CNTs decorated with silver nanoparticles (Ag@CNTs) were produced. The Ag@CNTs were dispersed in polyvinyl alcohol (PVA) to fabricate electrically conducting polymer composites. The electrical, thermal and mechanical properties of the composites were measured. The electrical conductivity of the composites containing 0.8 % (o.w.f.) Ag@CNTs was more than four orders of magnitude higher than those of pristine and functionalized CNTs respectively, which confirmed the effectiveness of the Ag@CNTs as conducting filler. However, the improved electrical conductivity led to somewhat decrease of mechanical properties of PVA/Ag@CNTs composites.     

Gallium arsenide (GaAs) nanofibers by electrospinning technique as future energy server materials

Gallium arsenide (GaAs) does have superior electronic properties compared with silicon. For instant, it has a higher saturated electron velocity and higher electron mobility. Weak mechanical properties and high production cost are the main drawbacks of this interesting semiconductor. In this study, we are introducing production of GaAs nanofibers by electrospinning methodology as a very low cost and yielding distinct product technique. In general, nano-fibrous shape is strongly improving the physical properties due to the high surface area to volume ratio of this nanostructure. The mechanical and environmental properties of the GaAs compound have been modified since GaAs nanofibers have been produced as a core inside a poly(vinyl alcohol) (PVA) shell. GaAs/PVA nanofibers were prepared by electrospinning of gallium nitrate/PVA solution in presence of arsenic vapor. The whole process was carried out in a closed hood equipped with nitrogen environment. FT-IR, XPS, TGA and UV-Vis spectroscopy analyses were utilized to confirm formation of GaAs compound. Transmission electron microscope (TEM) analysis has revealed that the synthesized GaAs compound is crystalline and does have nano-fibrous shape as a core inside PVA nanofibers. To precisely recommend the prepared GaAs nanofiber mats to be utilized in different applications, we have measured the electric conductivity and the band gap energies of the prepared nanofiber mats. Overall, the obtained results affirmed that the proposed strategy successfully remedied the drawbacks of the reported GaAs structures and did not affect the main physical properties of this important semiconductor.     

The effects of boric acid on the rheological behavior of time dependent structure formation in PVA/DMSO solutions

Lots of studies have been carried out to improve the strength of polyvinyl alcohol (PVA) fibers. One of these studies is crosslinking spinning for a good quality fiber. As a crosslinking agent, boric acid (BA, H₃BO₃) was used. PVA can crosslink with BA without adding cation in using dimethyl sulfoxide (DMSO). The effects of BA addition and molecular weight (MW) on the formation of the physical structure in PVA/DMSO solutions were investigated. The results showed that the time dependence of the rheological responses was greatly influenced by the BA addition to the PVA/DMSO solutions. The results also showed that the BA addition to the PVA/DMSO solutions increased the dynamic viscosity (η′), the storage modulus (G′), and the loss modulus (G″) of the PVA/DMSO solutions. Increasing MW of PVA also decreased the time dependence. In addition, the BA addition to the PVA/DMSO solutions decreased the gelation time of the PVA/DMSO solutions. These overall results suggested that the structure formation through specific interactions between PVA molecules and BA resulted in the time dependent changes of the rheological properties of the PVA/DMSO solutions.     

Preparation and characterization of porous carbon based nanocomposite for supercapacitor

Porous nanocomposites are prepared by electrospinning blended polyacrylonitrile, copper acetate and mutiwalled carbon nanotube in N, N-dimethylformamide. The electrospun nanofiber webs are oxidatively stabilized and then carbonized resulting in composite carbon nanofibers. The study reveals that composite nanofibers with relatively smooth surface morphology are successfully prepared. X-ray diffraction is used to confirm the presence of Cu in carbon nanofibers. The carbon nanofibers with CNTs have better thermal stability and higher electrical conductivity. The Brunauer-Emmett-Teller analysis reveals that C/Cu/CNTs nanocomposites with mesopores possess larger specific surface area and narrower pore size distribution than that of C/Cu nanofibers. The electrochemical properties are investigated by cyclic voltammetry and galvanostatic charge-discharge tests. The nanocomposite with 0.5 wt.% CNT loading exhibits an energy density of 2 Whkg^?1, power density of 1916 Wkg^?1, a specific capacitance of about 225 Fg^?1 at a current density of 2 Ag^?1 and its capacitance decreased to 78 % of its initial value after 3,000 cycles.     

Fabrication of silver nanoparticle/polyvinyl alcohol/polycaprolactone hybrid nanofibers nonwovens by two-nozzle electrospinning for wound dressing

In this study, two biodegradable polymers, polycaprolactone (PCL) and polyvinyl alcohol (PVA) were used to fabricate nanofiber nonwovens (NFNs). Also, the silver nanoparticles (AgNPs) successfully reduced by using tea polyphenols (TP) and incorporated in the NFNs via electrospinning. The morphologies of the NFNs and AgNPs were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), respectively. The PCL nanofibers and PVA nanofibers interweaved each other, and AgNPs with average diameter 1.53±0.15 nm were embedded in the PVA nanofibers. The properties of electrospun NFNs were characterized by pore property, swelling/weight loss, water contact angle, mechanical property, and antibacterial activity. The nanofibers cross-linked to each other forming the 3Dnetwork porous structure with diameter about 1-1.5 μm. Although the hydrophobic PCL was added in the hybrid NFNs, the NFNs still showed hydrophilic propriety, high swelling degree (i.e. swelling degree is 330 % for 48 h), and low weight loss (i.e. weight loss is 22.4 % for 48 h). Also, the hybrid PCL/PVA/AgNPs NFNs exhibited a suitable mechanical property for wound dressings (i.e. tensile strength is 4.27 MPa, and breaking elongation is 88 %). Moreover, the hybrid NFNs effectively inhibited growth of Escherichia coli and Staphylococcus aureus. In summary, this PCL/PVA/AgNPs NFNs may provide a promising candidate for accelerating wound healing.     

Preparation of porous PVDF nanofiber coated with Ag NPs for photocatalysis application

The porous Polyvinylidene fluoride (PVDF) nanofibers were prepared by leaching method using polyethylene oxide (PEO) as porogen for the first time. The influences of the molecular weight (MW) and concentration of PEO, and the leaching solution on the morphology and the surface area of the porous PVDF nanofiber were systematically investigated. Polyethylene glycol 6000 (PEG6000) showed a better pore-forming effect. Optimized preparation parameters were obtained. With the ratio of PEG6000/PVDF reaching 1:1, the surface area of the resulting porous PVDF nanofiber was about three times higher than that of the pure PVDF nanofiber. Moreover, NaClO solution as leaching solution showed a very limited influence on the surface area of porous PVDF nanofiber. Afterwards, Ag NPs coated PVDF (Ag/PVDF) nanofiber was prepared by physical adsorption of Ag ions and in-situ reduction reaction using sodium borohydride as reductant. The photoactivity of Ag/PVDF nanofiber was evaluated by the photodegradation of methyl orange (MO) under visible light irradiation. Ag/PVDF nanofiber showed a better photoactivity than PVDF-Ag nanofiber prepared by the ex-situ blending method.     

Electrical properties of ultrafine nylon-6 nanofibers prepared via electrospinning

We report on the preparation and electrical characterization of nylon-6 nanofibers via electrospinning technique. During electrospinning, the polymer solution became highly ionized and emerging out of the micro-tip syringe by forming mesh-like ultrafine nanofibers structure in between the main fibers. The resultant nylon-6 nanofibers were well-oriented with uniform structure. The diameter of the ultrafine nanofibers (7 to 40 nm) is one order less than those of main fibers (100 to 200 nm). The current-voltage (I-V) measurements revealed a linear curve with an occurrence of negative differential resistance (NDR) behavior. The existence of NDR region in the nylon-6 nanofibers can be attributed to the tunneling current through the ultrafine structures. The fabrication of nanofibers, in the form of ultrafine mesh-like form, is relatively fast and inexpensive, and it paves the way to build up of new dimension for nano device applications.     

Facile fabrication of carbon nanotubes/polystyrene composite nanofibers for high-performance electromagnetic interference shielding

Polystyrene (PS) composites with nanofibrous structure consisting of multi-walled carbon nanotubes (MWCNTs) with 0-10 wt.% of nanofiller have been fabricated via electrospinning technique. The surface morphology and thermal properties of the composites were evaluated by scanning electron microscopy (SEM) and thermo-gravimetric analysis (TGA). The SEM analysis of the composite nanofibers samples revealed that the average diameter of the nanofibers increases with increasing MWCNTs content. The resultant MWCNTs/PS composite nanofibers diameters were in the range of 391±63 to 586±132 nm. The thermal stability of composites was increased after addition of MWCNTs to PS matrix. The electrical conductivity of the composites with different weight percentage of MWCNTs was investigated at room temperature. Electrical conductivity of MWCNTs/PS composite nanofiber followed percolation theory having a percolation threshold V _c= 0.45 vol% (~0.75 wt. %) and critical exponent q=1.21. The electrical conductivity and thermal properties confirmed the presence of good dispersion and alignment MWCNTs encapsulated within the electrospun nanofibers. The electromagnetic interference (EMI) shielding effectiveness of the MWCNTs/PS composites was examined in the measurement frequency range of 8.2-12.4 GHz (X-band). The total EMI shielding efficiency of MWCNTs/PS composite nanofibers increased up to 32 dB. The EMI shielding results for MWCNTs/PS composite nanofibers showed that absorption loss was the major shielding mechanism and reflection was the secondary mechanism. The present study has shown the possibility of utilizing MWCNTs/PS composite nanofibers as EMI shielding/absorption materials.     

Effective Management of the <Emphasis Type="Italic">Phthorimaea operculella</Emphasis> (Zeller) Using PVA Nanofibers Loaded with <Emphasis Type="Italic">Cinnamomum zeylanicum</Emphasis> Essential Oil

Phthorimaea operculella (Zeller) is one of the most common insect pests of cultivated potato in tropical and subtropical regions. In this research, a potential strategy to improve the insecticidal activity of plant essential oils for the effective management of P. operculella was studied. The insecticidal and residual effects of nanofiber oil (NFO) and pure essential oil (PEO) of Cinnamomum zeylanicum were assessed on PTM under laboratory conditions. The nanofibers were made by the electrospinning method using polyvinyl alcohol (PVA) polymer. The morphological characteristics of the nanofibers were evaluated by scanning electron microscopy and Fourier transform infrared spectroscopy. The chemical constituents of cinnamon essential oil (EO) were detected by GC/MS. Fumigant toxicity of NFO and PEO were evaluated on different growth stages (egg, male and female adults) of P. operculella. SEM and FTIR analyses confirmed the presence of EO on the nanofiber structure. The yield of the EO from C. zelanicum on the nanofibers was 1.86%. GC/MS analysis showed that cinnamaldehyde was the primary constituent (69.88%) of cinnamon EO. LC₅₀ values of C. zelanicum EO and NFO were 4.92 and 1.76 μl/l air for eggs, 0.444 and 0.212 μl/l air for female adults, and 0.424 and 0.192 μl/l air for male adults, respectively. Fumigant bioassays revealed that NFO was more toxic than C. zeylanicum oil against at all stages of P. operculella. The residual effect of PEO and NFO was evaluated against the egg stage of the P. operculella. NFO lost insecticidal effectiveness 47 days after application, while the efficacy of PEO decreased 15 days after application. Our results suggest that NFO of C. zeylanicum can be used as an effective new tool for the management of P. operculella.     

Fabrication of electropsun PLGA and small intestine submucosa-blended nanofibrous membranes and their biocompatibility for wound healing

In recent decades, tremendous research has focused on the production of nanoscale fibers using synthetic polymers, with the goal of fabricating nanofibrous scaffolds for wound healing. However, the hydrophobicity of such polymers typically hinders attachment and proliferation of the cells. In this study, we combined poly-d,l-lactide-co-glycolide (PLGA) and small intestine submucosa (SIS) to fabricate blended nanofibers for wound healing by electrospinning. PLGA and SIS were dissolved in 1,1,1,3,3,3-hexafluoro isopropanol to produce different weight ratios of PLGA/SIS-blended nanofibrous membranes (NFM). Physicochemical characterization of the electrospun NFM was performed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, water contact angle analysis, degradation test and tensile testing. The PLGA/SIS-blended NFM showed improved hydrophilicity and tensile strength. Better infiltration, attachment and proliferation of rat granulation fibroblasts of PLGA/SIS-blended NFMs compared to PLGA NFMs were identified by morphological differences determined by SEM and a water-soluble tetrazolium salt assay kit. Based on our results, the PLGA/SIS blended NFMs were found to be suitable for use as a potential material for wound dressing.     

Electrospun poly(tetrafluoroethylene) nanofiber membranes from PTFE-PVA-BA-H<Subscript>2</Subscript>O gel-spinning solutions

As a kind of high-performance fibers, PTFE fiber has been widely used in many fields because of its unique characteristics. In this study, the poly(tetrafloroethylene) (PTFE) nanofibers manufactured by electrospinning method was reported. The gel-spinning solution of poly(tetrafluoroethylene)/poly(vinyl alcohol)/boric acid (PTFE/PVA/BA), which was prepared by the gel process of the mixture of PTFE, PVA, BA and redistilled water, was electrospun to form PTFE/PVA/BA composite nanofibers. After calcinating, the PTFE nanofibers with diameters of 200 nm to 1000 nm were obtained. The fibers before and after calcinating were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), FT-IR spectrum analysis and X-ray photoelectron spectroscopy (XPS), respectively, and the mechanical and hydrophobic properties of the fibers were also investigated. The results showed that the PTFE nanofiber membranes could be electrospun effectively used the gel-spinning solution of PTFE/PVA/BA, and may realize the applications in the fields of high-temperature filtration, catalyst supports, battery separator and so on.     

Preparation and characterization of electrospun polyvinyl alcoholstyrylpyridinium/<Emphasis Type="Italic">β</Emphasis>-cyclodextrin composite nanofibers: Release behavior and potential use for wound dressing

Biocompatible polyvinyl alcohol (PVA)-styrylpyridinium (SbQ)/β-cyclodextrin (β-CD) composite nanofibers were obtained by electrospinning in this study. PVA-SbQ was used as the foundation polymer as well as crosslinking agent, β-CD was incorporated to achieve expected properties such as improved mechanical properties and thermal stability. The Fourier transform infrared spectroscopy (FTIR) spectra confirmed the existence of β-CD, and the morphologies and average fiber diameters of the electrospun composite nanofibers were also analyzed by SEM. X-ray diffraction patterns (XRD) of PVA-SbQ/β-CD composite nanofibers revealed that the inclusion of β-CD in the nanofibers affected the ordered phase of PVA. Besides, the thermal analyses revealed the improvement in the thermal properties for PVA-SbQ/β-CD composite nanofibers. It was found that the crosslinked composite nanofibers showed a clear higher tensile strength (TS) as well as a greater elongation at break (EB). Eventually, antifungal drug griseofulvin (GSV) has been loaded into the composite nanofibers by formation of its inclusion complex with β-CD in aqueous solution, ultraviolet light (UV-Vis) spectral analysis showed that the drug-loading nanofibers had certain sustained release effect.     

Synthesis and characterization of boron doped alumina stabilized zirconia fibers

Boron doped PVA/Zr-Al acetate nanofibers were prepared by electrospinning using PVA as a precursor. The effect of calcination temperature on morphology and crystal structure was investigated at 250, 500, and 800 °C. The study also establishes the effect of boron doping on the morphology of PVA/Zr-Al acetate nanofibers at various calcination temperatures. The measurements showed that the conductivity, pH, viscosity and the surface tension of the hybrid polymer solutions have increased with boron doping. In addition, the fibers were characterized by FTIR, DSC, XPS, XRD and SEM techniques. The addition of boron did not only increase the thermal stability of the fibers, but also increased the average fiber diameters, which gave stronger fibers. The DSC results indicated that the melting temperature (Tm) of the fibers was increased from 256 to 270 °C with the addition of boron. XRD peak patterns showed that after further heat treatment at 800 °C, zirconia exists in two phases of tetragonal and monoclinic modifications. Moreover, alumina does not transform into the γ-Al₂O₃ and θ-Al₂O₃ phase at 800 °C. The SEM appearance of the fibers showed that the addition of boron resulted in the formation of crosslinked bright surfaced fibers.     

Release of aloe vera from electrospun aloe vera-PVA nanofibrous pad

The electrospinnability of aloe vera gel and the release mechanism as well as the kinetic of its release from poly vinyl alcohol (PVA) nanofibrous matrix is reported. Addition of PVA by an amount of only 1 % (w/w) to aloe vera solution made its electrospinning possible leading, to the fabrication of aloe vera nanofiber (99 %) with an average diameter of around 80 nm. Electrospinning of aloe vera-PVA solutions (25-75, 50-50, 75-25) led to the fabrication of nanofibers with average diameter of around 55, 105 and 110 nm, respectively. FTIR analysis showed no reaction between aloe vera and PVA. X-ray diffraction patterns showed no considerable effect from aloe vera on the amorphous structure of PVA. The release mechanism of aloe vera from PVA matrix in phosphate buffer solution was of Ficki type and the kinetic of the release followed Higuchi model. Aloe vera or aloe vera-PVA electrospun nanofibers may be used as an aloe vera release system in wound care. In a phosphate buffer solution, at least 60 percent of aloe vera is released in the first hour and about 90 % of aloe vera is released in 2-4 hours depending on the diameter of the nanofibers.     

Preparation and characterization of blended <Emphasis Type="Italic">Bombyx mori</Emphasis> silk fibroin scaffolds

The aim of this study was to compare physical, mechanical and biological properties of 3-dimensional scaffolds prepared from Bombyx mori silk fibroin (SF), fibroin blended with collagen (SF/C), and fibroin blended with gelatin (SF/G) using a freeze-drying technique. The prepared scaffolds were sponge-like structure that exhibited homogeneous porosity with highly interconnected pores. Average pore size of these scaffolds ranged from 65–147 μm. All biodegradable scaffolds were capable of water absorption of 90 %. The degradation behavior of these scaffolds could be controlled by varying the amount of blended polymer. The SF/C and SF/G scaffolds showed higher compressive modulus than that of SF scaffolds which could be attributed to the thicker pore wall observed in the blended constructs. The less crystalline SF structure was observed in SF/G scaffolds as compared to SF/C scaffolds. Thus, the highest compressive modulus was observed on SF/C matrix. To investigate the feasibility of the scaffolds for cartilage tissue engineering application, rat articular chondrocytes were seeded onto the scaffolds. The MTT assay demonstrated that blending collagen or gelatin into SF sponge facilitated cell attachment and proliferation better than SF scaffolds. The blended SF scaffolds possessed superior physical, mechanical and biological properties in comparison to SF scaffolds and showed high potential for application in cartilage tissue engineering.