Impact of high-pressure carbon dioxide combined with thermal treatment on degradation of red beet (Beta vulgaris L.) pigments

A combined high-pressure carbon dioxide (HP-CO 2) and thermal degradation reaction of betanin and isobetanin in aqueous solution was investigated and can be described by a first-order decay. At 45 degrees C, the degradation rate constant ( k) for each pigment component significantly increased (the half-life ( t 1/2) decreased, p < 0.05) with elevated pressure. Furthermore, HP-CO 2 treatment led to lower k values (higher t 1/2 values) than thermal treatment. However, k and t 1/2 values approached those of thermal treatment when the pressure was >30 MPa combined with temperatures exceeding 55 degrees C. Moreover, betanin was more stable than isobetanin under HP-CO 2. E a values ranged from 94.01 kJ/mol for betanin and 97.16 kJ/mol for isobetanin at atmospheric pressure to 170.83 and 142.69 kJ/mol at 50 MPa, respectively. A higher pressure and temperature as well as longer exposure time resulted in higher values of L*, b*, C*, and h degrees . HP-CO 2 induced more degradation products from betanin and isobetanin than thermal treatment with an identical temperature and exposure time.     

Alkamide stability in Echinacea purpurea extracts with and without phenolic acids in dry films and in solution

Degradation of the major alkamides in E. purpurea extracts was monitored under four different accelerated storage conditions, phenolic-depleted and phenolic-rich dry E. purpurea extracts and phenolic-depleted and phenolic-rich DMSO E. purpurea extracts at 70, 80, and 90 degrees C. Degradation of alkamides followed apparent first-order reaction rate kinetics. Alkamides degraded faster in dry films than in DMSO solution. The phenolic acids acted as antioxidants by limiting the loss of the alkamides in dry E. purpurea extracts. In contrast, E. purpurea alkamides in DMSO degraded faster when the phenolic fraction was absent. The overall order of degradation rate constants was alkamides 1 approximately 2 approximately 6 > 9 approximately 8 > 3 approximately 5 approximately 7. The energy of activation (Ea) predicted for alkamide degradation averaged 101 +/- 12 kJ/mol in dry films +/- phenolic acids, suggesting the oxidation mechanism was the same under both conditions. In DMSO solutions, Ea values were about one-half of those in dry films (61 +/- 14 kJ/mol), suggesting a different mechanism for alkamide oxidation in solution compared to dry. Predicted half-lives for alkamides in extracts suggested very good stability.     

Isomerization and degradation kinetics of hop (Humulus lupulus) acids in a model wort-boiling system

The rate of isomerization of alpha acids to iso-alpha acids (the compounds contributing bitter taste to beer) was determined across a range of temperatures (90-130 degrees C) to characterize the rate at which iso-alpha acids are formed during kettle boiling. Multiple 12 mL stainless steel vessels were utilized to heat samples (alpha acids in a pH 5.2 buffered aqueous solution) at given temperatures, for varying lengths of time. Concentrations of alpha acids and iso-alpha acids were quantified by high-pressure liquid chromatography (HPLC). The isomerization reaction was found to be first order, with reaction rate varying as a function of temperature. Rate constants were experimentally determined to be k1 = (7.9 x 10(11)) e(-11858/T) for the isomerization reaction of alpha acids to iso-alpha acids, and k2 = (4.1 x 10(12)) e(-12994/T) for the subsequent loss of iso-alpha acids to uncharacterized degradation products. Activation energy was experimentally determined to be 98.6 kJ per mole for isomerization, and 108.0 kJ per mole for degradation. Losses of iso-alpha acids to degradation products were pronounced for cases in which boiling was continued beyond two half-lives of alpha-acid concentration.     

Comparative studies on the delignification of pine kraft-anthraquinone pulp with hydrogen peroxide by binucleus Mn(IV) complex catalysis

Pine kraft-anthraquinone (kraft-AQ) pulp was bleached in alkaline solution with hydrogen peroxide catalyzed by either [L(1)Mn(IV)(micro-O)(3)Mn(IV)L(1)](PF(6))(2)] (C1) or [LMn(IV)(2)(micro-O)(3)] (ClO(4))(2) (C2) at 60 and 80 degrees C for 120 min with a catalyst charge of 10 ppm on pulp. The resulting bleached pulp was hydrolyzed with cellulase to obtain insoluble and soluble residual lignins. The alkaline bleaching effluents were acidified to precipitate alkaline-soluble lignins. These lignin preparations were then characterized by 2D heteronuclear multiple-quantum coherence (HMQC) NMR spectroscopic techniques. The results showed that biphenyl (5-5) and stilbene structures of the residual lignin in the pulp are preferentially degraded in both the C1- and C2-catalyzed bleachings, whereas beta-O-4, beta-5, and beta-beta structures undergo degradation to a lesser extent. In both cases, the degradation of the residual lignin increased with the increase in reaction temperature from 60 to 80 degrees C. Thus, the result of C1-catalyzed delignification is not in agreement with the observed decrease in the disappearance rate for substrates in the C1-catalyzed oxidation of lignin model compounds with hydrogen peroxide when the reaction temperature is increased from 60 to 80 degrees C. In addition, the resulting residual lignins in the C2-catalyzed bleaching at 80 degrees C are less degraded than the corresponding lignins in the C1-catalyzed bleaching at both 60 and 80 degrees C. Thus, C1 is more effective than C2 as catalyst in the binucleus Mn(IV) complex-catalyzed bleaching of pine kraft-AQ pulp with hydrogen peroxide.     

Degradation kinetics of the antioxidant additive ascorbic acid in packed table olives during storage at different temperatures

The kinetics of ascorbic acid (AA) loss during storage of packed table olives with two different levels of added AA was investigated. Three selected storage temperatures were assayed: 10 degrees C, ambient (20-24 degrees C), and 40 degrees C. The study was carried out in both pasteurized and unpasteurized product. The effect of pasteurization treatment alone on added AA was not significant. In the pasteurized product, in general AA degraded following a first-order kinetics. The activation energy calculated by using the Arrhenius model averaged 9 kcal/mol. For each storage temperature, the increase in initial AA concentration significantly decreased the AA degradation rate. In the unpasteurized product, AA was not detected after 20 days in samples stored at room temperature and AA degradation followed zero-order kinetics at 10 degrees C, whereas at 40 degrees C a second-order reaction showed the best fit. In both pasteurized and unpasteurized product, the low level of initial dehydroascorbic acid disappeared during storage. Furfural appeared to be formed during storage, mainly at 40 degrees C, following zero-order kinetics.     

Degradation of chloroacetanilide herbicides by anodic fenton treatment

Anodic Fenton treatment (AFT) is an electrochemical treatment employing the Fenton reaction for the generation of hydroxyl radicals, strong oxidants that can degrade organic compounds via hydrogen abstraction. AFT has potential use for the remediation of aqueous pesticide waste. The degradation rates of chloroacetanilides by AFT were investigated in this work, which demonstrates that AFT can be used to rapidly and completely remove chloroacetanilide herbicides from aqueous solutions. Acetochlor, alachlor, butachlor, metolachlor, and propachlor were treated by AFT, and parent compound concentrations were analyzed over the course of the treatment time. Degradation curves were plotted and fitted by the AFT kinetic model for each herbicide, and AFT model kinetic parameters were used to calculate degradation rate constants. The reactivity order of these five active ingredients toward hydroxyl radical was acetochlor approximately metolachlor > butachlor approximately alachlor > propachlor. Treatment of the chloroacetanilides by AFT removed the parent compounds but did not completely mineralize them. However, AFT did result in an increase in the biodegradability of chloroacetanilide aqueous solutions, as evidenced by an increase in the 5-day biochemical oxygen demand to chemical oxygen demand ratio (BOD5/COD) to >0.3, indicating completely biodegradable solutions. Several degradation products were formed and subsequently degraded, although not always completely. Some of these were identified by mass spectral analyses. Among the products, isomers of phenolic and carbonyl derivatives of parent compounds were common to each of the herbicides analyzed. More extensively oxidized products were not detected. Degradation pathways are proposed for each of the parent compounds and identified products.     

Optimization of extraction of phenolic compounds from flax shives by pressurized low-polarity water

Pressurized low-polarity water (PLPW) extraction of phenolic compounds from flax shive was investigated using statistically based optimization and the "one-factor-at-a-time" method. Extraction variables examined using central composite design (CCD) included temperature, flow rate, and NaOH concentration of the extracting water. Extraction of phenolic compounds including p-hydroxybenzaldehyde, vanillic acid, syringic acid, vanillin, acetovanillone, and feruric acid was affected by temperature and NaOH concentration; and extraction of all phenolic compounds, except ferulic acid, increased with temperature and NaOH concentration of the extracting water. Flow rate had little effect on concentration of phenolic compounds at equilibrium, but the extraction rate at the early phase was higher for higher flow rates. The mechanism of PLPW extraction of flax shive phenolics was also investigated using a two-site kinetic model and a thermodynamic model. To determine the extraction mechanism, flow rate was varied from 0.3 to 4.0 mL/min while temperature and NaOH concentration were fixed at 180 degrees C and 0.47 M, respectively. The flow rate tests showed the extraction rates of total phenolic (TP) compounds increased with flow rate and can be described by a thermodynamic model. The results from the thermodynamic model demonstrated that a K(D) value of 30 agreed with the experimental data in the flow rate range of 0.3-4.0 mL/min. When the effect of the three independent variables was evaluated simultaneously using CCD, a maximum TP concentration of 5.8 g/kg of dry flax shive (DFS) was predicted from the combination of a high temperature (230.5 degrees C), a high initial concentration of NaOH (0.63 M), and a low flow rate (0.7 mL/min). Maximum TP concentration of 5.7 g/kg of DFS was obtained from extraction conditions of 180 degrees C, 0.3 or 0.5 mL/min, and 0.47 M NaOH at equilibrium. A second-order regression model generated by CCD predicted a maximum TP concentration of 5.8 g/kg of DFS under the same extraction conditions, which is well matched with the results from experimental data.     

Influence of coffee roasting on the incorporation of phenolic compounds into melanoidins and their relationship with antioxidant activity of the brew

In the present study, the influence of coffee roasting on free and melanoidin-bound phenolic compounds and their relationship with the brews' antioxidant activity (AA), evaluated by TRAP, TEAC, and TRAP, were investigated. Changes in the relative content of free chlorogenic acids (CGA), free lactones, and melanoidin-bound phenolic acids during roasting indicate that phenolic compounds were incorporated into melanoidins mainly at early stages of the process, being thereafter partly oxidized to dihydrocaffeic acid, and degraded. Although less than 1% of CGA in green coffee was incorporated into melanoidins during roasting, the relative content of melanoidin-bound phenolic acids increased significantly during this process, reaching up to 29% of total phenolic compounds in brews from dark roasted coffees. Regardless of the AA assay used and considering all roasting degrees, the overall contribution of CGA to the AA of the whole brews was higher than that of melanoidin-bound phenolic compounds. It was estimated that the latter compounds contributed to 25-47% of the AA, depending on the assay used.     

Phenolic compounds and antioxidant activity of extracts from ultrasonic treatment of Satsuma Mandarin (Citrus unshiu Marc.) peels

Ultrasound-assisted extraction (UAE) was used to extract phenolic compounds from Satsuma mandarin ( Citrus unshiu Marc.) peels (SMP), and maceration extraction (ME) was used as a control. The effects of ultrasonic time (10, 20, 30, 40, 50, and 60 min), temperature (15, 30, and 40 degrees C), and ultrasonic power (3.2, 8, 30, and 56 W) on phenolic compounds were investigated. High-performance liquid chromatography (HPLC) coupled with a photodiode array (PDA) detector was used for the analysis of phenolic acids after alkaline hydrolysis (bound phenolic acids) and flavanone glycosides. The contents of seven phenolic acids (caffeic acid, p-coumaric acid, ferulic acid, sinapic acid, protocatechuic acid, p-hydroxybenzoic acid, and vanillic acid) and two flavanone glycosides (narirutin and hesperidin) in extracts obtained by ultrasonic treatment were significantly higher than in extracts obtained by the maceration method. Moreover, the contents of extracts increased as both treatment time and temperature increased. Ultrasonic power had a positive effect on the contents of extracts. However, the phenolic acids may be degraded by ultrasound at higher temperature for a long time. For example, after ultrasonic treatment at 40 degrees C for 20 min, the contents of caffeic acid, p-coumaric acid, ferulic acid, and p-hydroxybenzoic acid decreased by 48.90, 44.20, 48.23, and 35.33%, respectively. The interaction of ultrasonic parameters probably has a complex effect on the extracts. A linear relationship was observed between Trolox equivalent antioxidant capacity (TEAC) values and total phenolic contents (TPC); the correlation coefficient, R(2), is 0.8288 at 15 degrees C, 0.7706 at 30 degrees C, and 0.8626 at 40 degrees C, respectively. The data indicated that SMPs were rich sources of antioxidants. Furthermore, UAE techniques should be carefully used to enhance the yields of phenolic acids from SMPs.     

Depolymerization and degradation of humic acids with sodium perborate

Two humic acids of different origin (peat and soil) were degraded with a 5% sodium perborate solution (140°C). This degradation process consists mainly of a stoichiometric production of hydrogen peroxide while the perborate is reacting with carboxyl groups of the oxidized polymers. A single perborate treatment degraded more than 40% of the humic acids to soluble products, but a 5-step oxidation was necessary for total degradation, the sample being transformed into soluble oligomers with properties similar to those of fulvic acids. The oligomeric fractions with lowest molecular weights, including individual molecules (soluble in ethyl acetate), were purified by adsorption chromatography and studied by GC-MS after methylation. The higher molecular weight fractions of oligomers were recovered over polyvinylpyrrolidone, eluted by alkali, and purified by ion-exchange chromatography (47% peat HA; 25% soil HA).Degradation products included alkanes, fatty acids and dicarboxylic acids. Aromatic compounds (mainly phenolic, benzenecarboxylic and cinnamic acids), amounted to 24–50% of the total volatile degradation products. There were striking differences between peat and soil humic acids, the former yielding typical lignin degradation products. Independently checked, the perborate degradation products were not the same as those obtained by mild treatment with hydrogen peroxide under alkaline conditions.     

Formation of strecker aldehydes from polyphenol-derived quinones and alpha-amino acids in a nonenzymic model system

Fruits and vegetables contain naturally occurring polyphenolic compounds that can undergo enzyme-catalyzed oxidation during food preparation. Many of these compounds contain catechol (1,2-dihydroxybenzene) moieties that may be transformed into o-quinone derivatives by polyphenoloxidases and molecular oxygen. Secondary reactions of the o-quinones include the Strecker degradation of ambient amino acids to form flavor-important volatile aldehydes. The purpose of this work was to investigate the mechanism of the polyphenol/o-quinone/Strecker degradation sequence in a nonenzymic model system. By using ferricyanide ion as the oxidant in pH 7.17 phosphate buffer at 22 degrees C, caffeic acid, chlorogenic acid, (+) catechin, and (-) epicatechin were caused to react with methionine and phenylalanine to produce Strecker aldehydes methional and phenylacetaldehyde in 0.032-0.42% molar yields (0.7-10 ppm in reaction mixtures). Also, by employing l-proline methyl ester in a reaction with 4-methylcatechol, a key reaction intermediate, 4-(2'-carbomethoxy-1'-pyrrolidinyl)-5-methyl-1,2-benzoquinone (7), was isolated and tentatively identified.     

Free radicals, antioxidants, and soil organic matter recalcitrance

Highly reactive, and potentially damaging, free radicals are readily generated in our oxygen‐rich environment, and are ubiquitous in biological systems. However, plants and animals have evolved protection against them with a range of antioxidant molecules, such as vitamins C and E, many of which are phenolic compounds. These stop the destructive chain reaction of free radical formation by being transformed into unreactive, stable free radicals. The biodegradation of food involves oxidation by free radicals, and is retarded by antioxidants. Similarly, the biodegradation of plant residues in soils involves free radicals; so the questions arise: (i) do soils have antioxidants, and (ii) what function might they have? The evidence suggests that they probably do have antioxidants. First, plant and animal remains added to soils will contain antioxidants. These are likely to persist for a time, particularly tannins, which are polyphenolic compounds with known antioxidant properties and which are relatively resistant to degradation. Second, studies using electron spin resonance spectroscopy have shown that humic materials contain stable semiquinone free radicals, and that their concentration increases as humification progresses. These semiquinone species are most likely to be derived from the reaction of phenolic compounds with reactive radicals. If this is the case, the phenolics are acting as antioxidants, because they are scavenging the reactive free radicals and terminating the oxidative chain reaction responsible for soil organic matter (SOM) degradation. Thus the soil's antioxidant capacity could control the rate of breakdown of organic matter in the more labile pools and could provide a chemical mechanism for the recalcitrance of SOM. Current available evidence for the nature of the recalcitrant pool in SOM is discussed in the light of this hypothesis, and the experimental approaches necessary for testing it are outlined.     

New qualitative approach in the characterization of antioxidants in white wines by antioxidant free radical scavenging and NMR techniques

The aim of this study was to obtain new information on antioxidant compounds in white wines. For this purpose, white wine degradation was promoted by a forced aged protocol, and six normally aged white wines from different vintages were analyzed. Both normal and forced aged wines were sequentially extracted using hexane and ethyl acetate. Apolar antioxidants were removed using hexane, and polar antioxidants were extracted with ethyl acetate. This last residue was subject to partial re-extraction with hexane and acetone. The antioxidant capacity of the wines and of each fraction was evaluated by two free radical methods, ABTS and DPPH. Normal aging provides a decrease in the total antioxidant capacity of wines. The antioxidant activity of ethyl acetate/acetone extracts was approximately 95% higher than that found for the hexane extracts. Concerning the forced aged wines, results showed that the wine submitted to a temperature of 60 degrees C for 21 days had higher antioxidant activity than that submitted to a temperature of 20 degrees C. With regard to the ethyl acetate/acetone extracts, oxygen and temperature treatment leads to a decrease in their antioxidant activity. NMR analysis was performed in the highest antioxidant capacity organic fractions (ethyl acetate/acetone extracts) and in the aqueous fraction of the control wine (T = 20 degrees C), in order to attempt the characterization of species involved in oxygen protection. Possible structures of antioxidant compounds in white wines were proposed. Two of these are tyrosol-like structures. This molecule is a well-known phenolic compound in wine, and it is reported to have antioxidative effects.     

A Rapid Two-Step Bioremediation of the Anthraquinone Dye, Reactive Blue 4 by a Marine-Derived Fungus

A rapid two-step technique for bioremediation of the anthraquinone dye, the Reactive Blue 4 (RB4) by a marine-derived fungus is reported here. In the first step, 1,000?mg?l^?1 of this dye treated with partially purified laccase of this fungus resulted in 61?% color removal and twofold decrease in chemical oxygen demand by 12?h. The metabolites formed during the enzymatic degradation were characterized by mass spectrometry, ultra performance liquid chromatography, and UV/visible spectroscopy. These analyses confirmed changes in the aromatic character of the parent dye and formation of low molecular weight phenolic compounds as the final products of the enzymatic degradation. Based on these results, the probable degradation products of RB4 were 2-formylbenzoic acid, 1,2,4,5-tetrahydroxy-3-benzoic acid, 2,3,4-trihydroxybenzenesulfonic acid, and 1,2,3,4-pentahydroxybenzene. In the second step, the enzyme-transformed dye solution subjected to sorption on the powdered fungal biomass resulted in a further reduction in color up to 93?% within 10?min. Sorption of the degraded dye was confirmed by the changes in the pattern of Fourier transform infrared spectroscopy spectrum. The two-step treatment resulted in a decrease of 29?% in total carbon accompanied by twofold decrease in toxicity. This is the first report on decolorization, detoxification, and mineralization of RB4 by laccase from a marine-derived fungus.     

土壤中的氧化锰对酚类化合物的氧化降解作用

本文研究了砖红壤和红壤中的氧化锰对１０种有毒酚化合物的氧化降解作用及氧化锰与酚化合物之间的氧化还原动力学，结果表明，土壤中氧化锰对某些有毒酚化合物具有氧化降解作用，各种酚化合物氧化降解的难易与其本身性质和分子结构有关。土壤中的氧化锰的还原溶解和氢醌的卖化均符合一级反应动力学方程。介质ｐＨ的降低有利于反应的进行，两种土壤中的氧化锰不溶解反应对（Ｈ＾＋）的级数为０．１６，氢醌除与氧化锰发生氧化还原反应     

In vitro gastrointestinal digestion study of pomegranate juice phenolic compounds, anthocyanins, and vitamin C

Pomegranate is an important source of bioactive compounds, such as anthocyanins, other phenolic compounds, and ascorbic acid. In the present work an in vitro availability method has been used to assay the influence of the physiological conditions in the stomach and small intestine. This method enables the study of the release of anthocyanins, vitamin C, and total phenols from the pomegranate juice and their transformations during gastrointestinal digestion. Results have shown that pomegranate phenolic compounds are available during the digestion in a quite high amount (29%). Nevertheless, due to pH, anthocyanins are largely transformed into non-red forms and/or degraded (97%), and similar results are obtained for vitamin C (>95% degradation).     

Chemical composition, antioxidant properties, and thermal stability of a phytochemical enriched oil from Acai (Euterpe oleracea Mart.)

Phenolic compounds present in crude oil extracts from acai fruit ( Euterpe oleracea) were identified for the first time. The stability of acai oil that contained three concentrations of phenolics was evaluated under short- and long-term storage for lipid oxidation and phenolic retention impacting antioxidant capacity. Similar to acai fruit itself, acai oil isolates contained phenolic acids such as vanillic acid (1,616 +/- 94 mg/kg), syringic acid (1,073 +/- 62 mg/kg), p-hydroxybenzoic acid (892 +/- 52 mg/kg), protocatechuic acid (630 +/- 36 mg/kg), and ferulic acid (101 +/- 5.9 mg/kg) at highly enriched concentrations in relation to acai pulp as well as (+)-catechin (66.7 +/- 4.8 mg/kg) and numerous procyanidin oligomers (3,102 +/- 130 mg/kg). Phenolic acids experienced up to 16% loss after 10 weeks of storage at 20 or 30 degrees C and up to 33% loss at 40 degrees C. Procyanidin oligomers degraded more extensively (23% at 20 degrees C, 39% at 30 degrees C, and 74% at 40 degrees C), in both high- and low-phenolic acai oils. The hydrophilic antioxidant capacity of acai oil isolates with the highest phenolic concentration was 21.5 +/- 1.7 micromol Trolox equivalents/g, and the total soluble phenolic content was 1252 +/- 11 mg gallic acid equivalents/kg, and each decreased by up to 30 and 40%, respectively, during long-term storage. The short-term heating stability at 150 and 170 degrees C for up to 20 min exhibited only minor losses (<10%) in phenolics and antioxidant capacity. Because of its high phenolic content, the phytochemical-enriched acai oil from acai fruit offers a promising alternative to traditional tropical oils for food, supplements, and cosmetic applications.     

Racemization kinetics of aspartic acid in fish material under different conditions of moisture, pH, and oxygen pressure.

The racemization kinetics of aspartic acid in heat-treated whole herring have been studied under conditions of treatment comparable to those that may occur in processing of fish meal. D-Aspartic acid content in the samples has been measured by RP-HPLC with precolumn automatic derivatization. The major parameters affecting the rate of racemization of aspartic acid k(Asp) have been demonstrated to be temperature (elevation of temperature from 95 to 120 degrees C resulted in an increase of k(Asp) from 0.46 to 3.39x10(-3) min(-1)), moisture of the raw material (reduction of the moisture content of the raw material from 80 to 15% lowered k(Asp) measured at 95 degrees C from 0.46 to 0.06x10(-3) min(-1)), and to a lesser extent, pH (k(Asp) at 95 degrees C was lowered from 0.46 to 0.37x10(-3) min(-1) following a decrease of pH from 7.0 to 4.0). No significant effects on the racemization rate of aspartic acid was observed for reducing the oxygen pressure to 0.8%. The results from the present study show that the content of D-aspartic acid in fish material is a function of heat exposure and may be used to predict the thermal history of fish meal.     

Kinetics and mechanism of cymoxanil degradation in buffer solutions

The kinetics and mechanism(s) of the hydrolytic degradation of a compound are needed to evaluate a compound's abiotic degradation in the environment. In this paper, the hydrolysis of cymoxanil [2-cyano-N-[(ethylamino)carbonyl]-2-(methoxyimino) acetamide] was investigated in dark sterile aqueous solutions under a variety of pH conditions (pH 2.8-9.2) and temperatures (15-50 degrees C). Hydrolysis of cymoxanil was described by first-order kinetics, which was dependent on pH and temperature. Cymoxanil degraded rapidly at pH 9 (half-life = 31 min) and relatively slowly at pH 2.8 (half-life = 722 days). The effect of temperature on the rate of cymoxanil degradation was characterized using the Arrhenius equation with an estimated energy of activation of 117.1 kJ mol(-)(1). An increase in temperature of 10 degrees C resulted in a decrease in half-life by a factor of approximately 5. Three competing degradation pathways are proposed for the hydrolysis of cymoxanil, with two of the pathways accounting for approximately 90% of cymoxanil degradation. These two pathways involved either initial cyclization to 1-ethyldihydro-6-imino-2,3,5(3H)-pyrimidinetrione-5-(O-methyloxime) (1, Figure 1) or direct cleavage of the C-1 amide bond to form cyano(methoxyimino) acetic acid (7). The third pathway of degradation involved initial cyclization to 3-ethyl-4-(methoxyimino)-2,5-dioxo-4-imidazolidinecarbonitrile (8), which rapidly degrades into 1-ethyl-5-(methoxyimino)-2,4-imidazoline-2,4-dione (9). All three pathways eventually lead to the formation of the polar metabolite oxalic acid.     

Kinetics and products of the degradation of chitosan by hydrogen peroxide

Low concentrations of hydrogen peroxide induced random degradation of partially deacetylated chitin and chitosan. Average molecular weight decreased in accordance with first-order kinetics. The degradation rate was much faster than that of the ultrasonic degradation, and it was comparable to that of the enzymatic hydrolysis of chitosan. Chain-end scissions occurred after chitosan was degraded severely and produced significant amounts of oligosaccharides at temperatures > or =80 degrees C. Universal calibration moderated the change in molecular weight more closely than that calculated by the usual calibration using pullulan standards. Trace amounts of transition metal ions and the amino groups in chitosan were critical to the breakdown of the beta-1,4 glycosidic linkages. HPLC results of glucosamine and chito-oligosaccharides could be characterized by correlating the logarithmic values of retention time with the degrees of polymerization. The formation of glucosamine and chito-oligosaccharides depended on the concentration of H(2)O(2), temperature, and the physicochemical property of chitin/chitosan.