Enzymatic saccharification and ethanol production of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">Paraserianthes falcataria</Emphasis> wood,and <Emphasis Type="Italic">Elaeis guineensis</Emphasis> trunk

We examined the saccharification and fermentation of meals from Acacia mangium wood, Paraserianthes falcataria wood, and Elaeis guineensis trunk. The levels of enzymatic hydrolysis of cellulose and ethanol production were highest for P. falcataria wood and lowest for A. mangium wood. Ultrasonication pretreatment of meal further increased the rates of hydrolysis and ethanol production in meal from P. falcataria wood. Through this pretreatment, hemicelluloses (xylan and xyloglucan) and cellulose were released in the meal from P. falcataria wood. Loosening of hemicellulose associations can be expected to make P. falcataria wood more useful for bioethanol production.     

Chemical alterations induced by <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis>/<Emphasis Type="Italic">Aspergillus flavipes</Emphasis> co-cultures in wood from different tree species

Chemical alterations following inoculation of Acacia mearnsii, Eucalyptus dunnii, E. grandis, and E. macarthurii with a Pycnoporus sanguineus/Aspergillus flavipes co-culture were investigated. Several wood chemical parameters were measured using standard methods from the pulp and paper industry. The data were described and analyzed using univariate as well as multivariate statistical techniques. Boxplots and in particular biplots show clearly how the chemical composition of each tree species was differently affected by the co-culture. Lignin content was significantly decreased in A. mearnsii, while E. dunnii showed a decrease in cellulose content. The results, therefore, indicate that the manner in which wood is degraded by a specific fungal co-culture depends on the tree species involved. This phenomenon should be considered when selecting fungi for bio-pulping.     

Insecticidal properties of <Emphasis Type="Italic">Thymus persicus</Emphasis> essential oil against <Emphasis Type="Italic">Tribolium castaneum</Emphasis> and <Emphasis Type="Italic">Sitophilus oryzae</Emphasis>

Red flour beetle Tribolium castaneum (Herbst) and rice weevil Sitophilus oryzae (L.) are considered to be the major insect pests in storage. Essential oils from aromatic plants are recognized as proper alternatives to fumigants. Thymus persicus (Ronniger ex Rech. f.) is one of these plants that have medicinal properties and is indigenous to Iran. The essential oil was obtained from aerial parts of the plant and analyzed by GC and GC–MS. Carvacrol (44.69%) and thymol (11.05%) were the major constituents of the oil extracted. In this experiment, fumigant toxicity of the essential oil was studied against T. castaneum, S. oryzae at 27 ± 1°C and 60 ± 5% RH in dark condition. The adult insects were exposed to the concentrations of 51.9, 111.1, 207.4 and 370.4 μl/l air to estimate median lethal time (LT₅₀) values. The fumigant toxicity was increased in response to increased essential oil concentrations. The LT₅₀ values at the lowest and the highest concentrations tested were ranged from 28.09 to 13.47 h for T. castaneum, and 3.86 to 2.30 h for S. oryzae. It was found that S. oryzae adults were much more susceptible to the oil than T. castaneum. After 24 h of exposure, the LC₅₀ values (95% fiducial limit) for T. castaneum and S. oryzae were estimated to be 236.9 (186.27–292.81) and 3.34 (2.62–4.28) μl/l air, respectively. These results suggest that T. persicus essential oil merits further study as potential fumigant for the management of these stored-product insects.     

Ring characteristics and screw withdrawal resistance of naturally regenerated <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> var. <Emphasis Type="Italic">formosana</Emphasis> trees

The ring characteristics and screw withdrawal resistance (SWR) of naturally regenerated Taiwan yellow cypress (Chamaecyparis obtusa var. formosana) trees were explored. Significant differences in average ring width (RW), earlywood width, latewood width, ring density (RD), earlywood density (ED), latewood density (LD), highest density (D_max), lowest density (D_min), latewood percentage (LWP), and SWR were observed between trees, rings (SWR excluded), and tree height positions. The RW components in the radial direction increased from the pith outward to about the 3rd to 5th ring and then decreased to about the 25th ring; it was almost constantly sustained toward the bark side. The RD in the radial direction slowly decreased from the pith outward to the bark side. Average ring width and ring density were significantly affected by the various tree growth rates, radial ring numbers, and tree height positions. ED, LD, D_max, D_min, and LWP were the most important factors determining the overall RD. RW did not correlate with tree RD. SWR is correlated with ED, RD, D_min, LWP, and intra-ring density variation (IDV). Thus, the SWR can be used to predict wood density and in nondestructive evaluation of a living tree.     

Leaf-level responses to light in two co-occurring <Emphasis Type="Italic">Quercus</Emphasis> (<Emphasis Type="Italic">Quercus ilex</Emphasis> and <Emphasis Type="Italic">Quercus suber</Emphasis>): leaf structure,chemical composition and photosynthesis

We studied morphological, biochemical and physiological leaf acclimation to incident Photon-Photosynthetic-Flux-Density (PPFD) in Quercus ilex (holm oak) and Quercus suber (cork oak) at Mediterranean evergreen oak woodlands of southern Portugal. Specific leaf area (SLA) decreased exponentially with increasing PPFD in both species. Q. ilex had lower SLA values than Q. suber. Leaf nitrogen, cellulose and lignin concentration (leaf area-based) scaled positively with PPFD. Maximum rate of carboxylation (V_cmax), capacity for maximum photosynthetic electron transport (J_max), rate of triose-P utilization (V_TPU) and the rate of nonphotorespiratory light respiration (Rd) were also positively correlated with PPFD in both Quercus species, when expressed in leaf area but not on leaf mass basis. Q suber showed to have higher photosynthetic potential (V_cmax, J_max^m and V_TPU^m) and a higher nitrogen efficient nitrogen use than Q.ilex. Leaf chlorophyll concentration increased with decreasing PPFD, improving apparent quantum use efficiency (Φ) in both Quercus species. We concluded that, in Q.ilex and Q.suber, leaf structural plasticity is a stronger determinant for leaf acclimation to PPFD than biochemical and physiological plasticity.     

Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Wood properties of <Emphasis Type="Italic">Pericopsis mooniana</Emphasis> grown in a plantation in Indonesia

The relationships between growth characteristics and wood properties were investigated for a threatened species, Pericopsis mooniana, to promote the establishment of plantations of this species in the tropics. Growth characteristics (diameter and height) and stress-wave velocity (SWV) of trees were measured for 22-year-old P. mooniana trees planted in Indonesia. The trees were categorized into three groups, fast-growing, middle-growing, and slow-growing trees, to investigate the effect of growth rate on the wood properties. In addition, radial variation of anatomical characteristics and wood properties were determined. No significant correlation was found between growth characteristics and SWV. The values for the vessel diameter, cell wall thickness of wood fibers, wood fiber length, basic density, modulus of elasticity, and modulus of rupture from wood at the bark side were higher than those at the pith side. On the other hand, vessel frequency gradually decreased from pith to bark. These results suggested that low-quality wood, such as juvenile wood, existed near the pith area.     

Structural unit of xylans from sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) and hinoki (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>)

Arabinoglucuronoxylans (AGXs) isolated from the holocellulose of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa) contained one 4-O-methyl-d-glucopyranosyluronic acid (4-O-Me-d-GlcAp) residue per 6.2 d-xylopyranose (d-Xylp) residues and one 4-O-Me-d-GlcAp residue per 3.8 d-Xylp residues. These AGXs were subjected to partial acid hydrolysis. Analyses by size exclusion chromatography and electrospray-ionization mass spectroscopy of the neutral sugar fractions in the hydrolysates showed the presence of xylooligosaccharides having a degree of polymerization of 2-8 in addition to d-Xyl, suggesting that the AGXs from sugi and hinoki contained unsubstituted chains consisting of at least eight d-Xyl residues. The acidic sugars in the hydrolysates were separated into two series of aldouronic acids composed of 4-O-Me-d-GlcAp and d-Xylp by ion-exchange chromatography. The first series included aldouronic acids from aldobiouronic acid (4-O-Me-d-GlcAp-Xyl) to aldopentaouronic acids (4-O-Me-d-GlcAp-Xyl₄). The second series were aldouronic acids composed of two 4-O-Me-d-GlcAp residues and 2-4 d-Xyl residues. In these acidic sugars, the uronic acid side chains were located on two contiguous d-Xyl residues. These facts indicated that AGXs from sugi and hinoki had a structural unit containing two 4-O-Me-d-GlcAp residues on two contiguous d-Xyl residues as well as AGXs from spruce and larch.     

Micromorphological characteristics of bamboo (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) fibers degraded by a brown rot fungus (<Emphasis Type="Italic">Gloeophyllum trabeum</Emphasis>)

The decay pattern in bamboo fibers caused by a brown rot fungus, Gloeophyllum trabeum, was examined by microscopy. The inner part of the polylaminate secondary wall was degraded, while the outer part of the secondary wall remained essentially intact. Degradation in bamboo fiber walls without direct contact with the fungal hyphae was similar to wood decay caused by brown rot fungi. Degradation in polylaminate walls was almost confined to the broad layers whereas the narrow layers appeared resistant. The p-hydroxylphenyl unit lignin in middle lamella, particularly in the cell corner regions, was also degraded. The degradation of lignin in bamboo fibers was evidenced by Fourier transform infrared spectra. The present work suggests that the decay of bamboo fiber walls by G. trabeum was influenced by lignin distribution in the fiber walls as well as the polylaminate structures.     

Reaction wood anatomy and lignin distribution in <Emphasis Type="Italic">Gnetum gnemon</Emphasis> branches

This study investigated the anatomical and chemical characteristics of the reaction wood of a gymnpsperm species, Gnetum gnemon, and discussed on contributing factor for the type of reaction wood in this species. Cell morphology, microfibril angle (MFA) of the S₂ layer and lignin distribution in secondary walls of tracheary elements, and lignin content were examined on three branches. Observations included no G-layer formation, significant decreases in vessel frequency, and altered MFA, and visible-light absorbance after lignin colour reactions in tracheid and fiber tracheid walls on the upper side in almost all samples. These results suggest that reaction wood in G. gnemon was similar to that in ‘tension-wood-like-reaction wood’ in angiosperms. On the other hand, reaction wood showed decrease in the lignin concentration in the fiber tracheid walls compared to the tracheid walls. In addition, the lignin in the tracheid and fiber tracheid walls was originally rich in syringyl units, suggesting that changes in the anatomical and chemical characteristics of secondary xylem due to reaction wood formation might relate to the ratio of the syringyl to guaiacyl units in lignin in the cell walls which function for mechanical support.     

Radial variations of wood properties of an endangered species, <Emphasis Type="Italic">Pinus armandii</Emphasis> var. <Emphasis Type="Italic">amamiana</Emphasis>

A dead tree of Pinus armandii Franch. var. amamiana (Koidz.) Hatusima (abbreviated to PAAm) was obtained from a natural habitat on Tanega-shima Island and various properties of its wood were investigated. Grain angle was measured and soft X-ray analysis was undertaken to obtain the density in each annual ring. Unit shrinkage and dynamic properties were measured by shrinkage, bending, and compression tests. Variations of wood properties in the radial direction, relationships of wood properties to density, and annual ring width were examined. Roughly speaking, variations in the radial direction of the grain angle, twist angle by drying, Young’s modulus and strength in static bending, absorbed energy in impact bending, compressive Young’s modulus, compressive strength, and compressive proportional limit corresponded to the variation of annual ring width. As a result, it was determined that if PAAm is afforested artificially for the purposes of lumber production and conservation, the annual rings of logs should not be too widely spaced. Wood properties of PAAm were similar to those of Japanese black pine (Pinus thunbergii Parl.), which is another representative pine on Tanegashima Island. This study was presented in part at the 56th Annual Meeting of the Japan Wood Research Society, Hiroshima, August 2007     

Antifeedant and toxic effects of acetogenins from <Emphasis Type="Italic">Annona montana</Emphasis> on <Emphasis Type="Italic">Spodoptera frugiperda</Emphasis>

Several species of the large family of tropical plants Annonaceae have been intensely investigated over the last 20 years, mainly because of the discovery of annonaceous acetogenins. These compounds are powerful cytotoxics, with potential applications as insecticides, antiparasitics, acaricides, fungicides, and antitumor drugs. Annona montana Macfad. (Annonaceae) grows in Santa Cruz de la Sierra, Bolivia, where an infusion of leaves is used for the treatment of lice, influenza, and insomnia. The major acetogenins from a Bolivian collection of A. montana, annonacin (1), cis-annonacin-10-one (2), densicomacin-1 (3), gigantetronenin (4), murihexocin-B (5), and tucupentol (6), were evaluated for their antifeedant and toxic effects on Spodoptera frugiperda Smith (Lepidoptera: Noctuidae), a serious pest affecting corn crops in Argentina. All the acetogenins produced 100% mortality during the larval or pupal stages at 100 μg of treatment per gram of diet. In addition, compounds 2, 3, and 4 deterred more than 80% feeding at the same dose. Relative toxicity values of LD₅₀ for the strongest larvicidal compounds 1, 2, and 4 were determined, indicating that the three compounds are effective natural insecticides. This is the first report on the antifeedant and toxic effects produced by the particular type of acetogenins, the mono-THF acetogenins, on the lepidopteran S. frugiperda. No correlation was detected between the toxicity of the mentioned compounds to larvae and the known capacity of the acetogenins 1, 2, and 4 to inhibit the NADH oxidase, indicating that the inhibition of the mitochondrial complex I is not the only cause for larval mortality of S. frugiperda.     

Moisture content variability in kiln-dried <Emphasis Type="Italic">Gmelina arborea</Emphasis> wood: effect of radial position and anatomical features

Gmelina arborea is one of the most important species for plantation in tropical areas. However, high variability in final moisture content (MC_f) is a problem in the drying process. This study sought to determine the variability in MC_f in relation to distance from the pith (DP), and anatomic elements. Boards of 1.2 cm in thickness obtained from bark to the pith from 15-year-old plantation trees were dried in a pilot kiln. Anatomical characteristics, initial moisture content (MC_i), and specific gravity (SG) were also determined. Pearson correlation matrix was conducted between MC_f and the other variables. DP, fiber length, and ray width were correlated negatively with MC_f, while fiber diameter was positively correlated. Other studied anatomical properties showed no statistical correlations. Other wood properties such as SG and MC_i showed some influence on MC_f. DP can be considered as a good practical predictor for MC_f in G. arborea because some wood properties are related to MC_f. However, other wood characteristics that are not related with DP also influence MC_f, such as the presence of sapwood, MC_i variation between and within trees, fiber diameter, and ray width. These results suggest that MC_f variation in G. arborea is difficult to determine.     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Nutritional requirements for larval development of the dry wood borer <Emphasis Type="Italic">Trichoferus holosericeus</Emphasis> (Rossi) in laboratory cultures

Despite the dangerousness of the dry wood-boring beetle Trichoferus holosericeus (Rossi) (=Hesperophanes cinereus (Villiers)) (Coleoptera: Cerambycidae), little is known about its biological and nutritional requirements. The aim of this research was therefore to investigate into the dietary preferences of this insect, in order to determine if carbohydrates can be considered as its main nutritional source, to clarify whether this cerambycid is specialised on hardwoods and finally to select a suitable diet for laboratory cultures. Different substrates were tested and the decay grade, as well as the survival of larvae, was recorded after 3 and 6 months. Chemical analyses were also carried out on excrements, residues of wood after larvae excavation and sound wood. Results indicated that T. holosericeus fed mainly on glucose and peptone added to an artificial diet, while on natural wood it preferred structural carbohydrates constituting the hemicelluloses and the non-crystalline cellulose. Furthermore, Scots pine sapwood had no toxic effect to the beetle. In terms of number and dimensions of emerged larvae, the artificial diet resulted to be the most suitable substrate for laboratory cultures of T. holosericeus among those tested.     

Within-stem variations in mechanical properties of <Emphasis Type="Italic">Melia azedarach</Emphasis> planted in northern Vietnam

Within-stem variations in the mechanical properties of 17–19-year-old Melia azedarach planted in two sites in northern Vietnam were examined by destructive and nondestructive methods. Wood samples were collected from 10, 50, and 90% of the radial length from pith on both sides (North and South) at 0.3, 1.3, 3.3, 5.3, and 7.3 m heights above the ground. The mean values in whole trees of wood density (WD), modulus of rupture (MOR), modulus of elasticity (MOE), and dynamic modulus of elasticity (E_d) at 12% moisture content were 0.51 g/cm³, 78.58 MPa, 9.26 GPa, and 10.93 GPa, respectively. Within the stem, the radial position was a highly (p?<?0.001) significant source of variation in mechanical properties. MOR, MOE, and E_d increased from pith to bark. WD had a strong positive linear relationship with both MOR (r?=?0.85, p?<?0.001) and MOE (r?=?0.73, p?<?0.001). This suggests that it is potentially possible to improve mechanical properties through controlling WD. MOR had also a strong linear relationship with E_d (r?=?0.84, p?<?0.001). This indicates that E_d is a good indicator to predicting the strength of wood if the density of measured element is known. Besides, the stress wave method used in this study provides relatively accurate information for determining the stiffness of Melia azedarach planted in northern Vietnam.     

Insecticidal efficacy of <Emphasis Type="Italic">Isaria farinosa</Emphasis> in different life stages of <Emphasis Type="Italic">Pissodes punctatus</Emphasis> (Coleoptera: Curculionidae)

The insecticidal activity of an entomopathogenic fungus, Isaria farinosa on pine bark-weevil (Pissodes punctatus) at different life stages underwent laboratory testing. Larvae, pupae and adults of Pissodes punctatus were exposed to a range of concentrations of fungal conidia in suspension for 5 s; mean mortality and LC₅₀ values were calculated. The results showed I. farinosa can effectively infect larvae, pupae and adult pine bark-weevils, and the highest mean mortalities at each life stage can exceed 88%. The mean mortalities increased with higher concentrations of I. farinosa. Larvae were most susceptible with LC₅₀ 1.2 × 10⁶ conidia ml⁻¹ (15 days), pupae (30 days) exhibited the second largest effects, and adults (15 days) with LC₅₀ 1.72 × 10⁶ and 1.99 × 10⁶ conidia ml⁻¹, respectively, at end of the experiments. This suggests that I. farinosa could be a potential bio-control agent against the pine bark-weevil.     

The behaviour of the species mingling index<Emphasis Type="Italic"> M</Emphasis><Subscript><Emphasis Type="Italic">sp</Emphasis></Subscript> in relation to species dominance and dispersion

Ecosystem conservation plays an increasingly important role in forest management. The value for such conservation has been directly linked to high diversity of species and structure within systems. In the past, forestry inventory practices have concentrated on aspects that were primarily required for timber management. Now, however, much interest has arisen in measures that will indicate higher or lower diversity. The interspersion of trees of different species reflects diversity at a local level and may serve as an important indicator for the simplification of a forest or woodland system. This article shows that the mingling index M_sp is robust in describing the spatial dispersion of plants; some guidelines for interpreting M_sp are provided.     

Germination and seedling growth of <Emphasis Type="Italic">Dimorphandra jorgei</Emphasis> MF Silva and <Emphasis Type="Italic">Swartzia macrostachya</Emphasis> Benth. var. <Emphasis Type="Italic">riedelii</Emphasis> Cowan

Dimorphandra jorgei MF Silva (Caesalpinaceae) and Swartzia macrostachya Benth. var. riedelii Cowan (Fabaceae) are tree species from the southern Bahian Atlantic Forest, identified for the restoration of degraded areas. The objective of this research is to study their seed germination and seedling growth to develop simple methods for seedling production in small scale nurseries. Because the species have distinct dormancy and germination characteristics, the seeds were submitted to different treatments. D. jorgei seeds were immersed in hot water, scarified and stored for 12 weeks in the laboratory environment (25°C). S. macrostachya seeds were submitted to different combinations of drying and storage in the laboratory environment or refrigerator (4°C). Seedlings were submitted to two light treatments for 3 months: partial shade (52% of full sun) and full shade (12% of full sun). In D. jorgei, the highest germination occurred for scarified seeds (87%) and for seeds stored for 12 weeks and then scarified (69%). In S. macrostachya the undried control seeds had the highest germination, followed by that of the refrigeration storage treatment, without predrying (99% and 97%, respectively). The average values for the growth parameters were greater in full shade for D. jorgei, while S. macrostachya seedlings showed greater growth rates in partial shade. Two months growth is recommended before D. jorgei seedlings are of the sufficient size and leaf number for field planting. On the other hand, a period of 4 months is recommended for S. macrostachya, due to its relatively slow growth.     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.