Possibility of improvement in fundamental properties of wood of acacia hybrids by artificial hybridization

Growth, specific gravity, and wood fiber length of Acacia mangium, Acacia auriculiformis, artificial acacia hybrid clones, and combinations, which were planted in a trial forest in Bavi, Vietnam, in July 2001, were examined. The radial variations from pith to bark were investigated to clarify the effect of genetic factors on these traits. Superiority of hybrids over their parents ranged from 36.3% to 41.6% for diameter, from 20.0% to 25.3% for height, from 6.9% to 20.7% for specific gravity, and from 6.1% to 12.8% for wood fiber length. The hybrid possessed heterosis in diameter, height, specific gravity, and wood fiber length regardless of whether the female parent was A. mangium or A. auriculiformis. The profiles of wood fiber length and specific gravity in the radial direction were similar for all the trees investigated. Wood fiber length was initially 0.5–0.6 mm near the pith and then increased slowly, finally reaching 1.0–1.2 mm near the bark. The specific gravity of acacia increased from 0.49–0.58 near the pith to 0.63–0.74 near the bark. From a relative distance of 30% from the pith, the specific gravity increased slightly and seemed to be stable. The relations among tree diameter, specific gravity, and wood fiber length were fair and could be represented by positive linear regression formulas. Hybrids for which A. auriculiformis was the female parent and A. mangium was the male parent had a faster growth rate and longer wood fibers than the inverse hybrids. Part of this report was presented at the 6th Pacific Regional Wood Anatomy Conference, Kyoto, Japan, December 2005     

Enzymatic saccharification and ethanol production of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">Paraserianthes falcataria</Emphasis> wood,and <Emphasis Type="Italic">Elaeis guineensis</Emphasis> trunk

We examined the saccharification and fermentation of meals from Acacia mangium wood, Paraserianthes falcataria wood, and Elaeis guineensis trunk. The levels of enzymatic hydrolysis of cellulose and ethanol production were highest for P. falcataria wood and lowest for A. mangium wood. Ultrasonication pretreatment of meal further increased the rates of hydrolysis and ethanol production in meal from P. falcataria wood. Through this pretreatment, hemicelluloses (xylan and xyloglucan) and cellulose were released in the meal from P. falcataria wood. Loosening of hemicellulose associations can be expected to make P. falcataria wood more useful for bioethanol production.     

Effect of growing site on the fundamental wood properties of natural hybrid clones of <Emphasis Type="Italic">Acacia</Emphasis> in Vietnam

We investigated clonal and site variations in wood fiber length, microfibril angle, and specific gravity of seven natural hybrid clones of Acacia (Acacia mangium × Acacia auriculiformis) grown in northern and southern Vietnam. Fiber length did not differ between clones or between sites. The microfibril angle of the S₂ layer did not significantly differ between clones but significantly differed between sites. Clone and site significantly affected specific gravity. The significant effects of genetic × environmental interactions on wood properties indicated the difference in the response of clones to different growing conditions. The trends of changes in fiber length, microfibril angle, and specific gravity from the vicinity of the pith to near the bark were similar for all clones at each site; however, variations in fiber length, microfibril angle, and specific gravity were more visible in northern Vietnam than in southern Vietnam, with a significant effect of genetic factors. This difference may be attributable to winter, which is experienced in northern Vietnam but not in southern Vietnam. For clone selection for plantation in the northern region, combining growth rate with wood properties was recommended. On the other hand, for plantation in the southern region, clone selection depends mainly on the growth rate, taking into consideration the specific gravity.     

Growth and Mycorrhizal Dependency of Acacia mangium Willd. Inoculated with Three Vesicular Arbuscular Mycorrhizal Fungi in Lateritic Soil

Three VA-mycorrhizal fungi; Glomus occultum, Glomus aggregatum (local isolates) and G. mosseae (strain from Bangalore, India) were inoculated to assess their effect on growth of Acacia mangium in lateritic soil. All inoculations enhanced growth with respect to shoot height, root diameter, leaf area, chlorophyll content and biomass of A. mangium significantly compared to uninoculated control seedlings. G. occultum proved most efficient among the three. The mycorrhizal dependency factor indicated that the growth of A. mangium was 57% dependent on G. occultum, 47% on G. mosseae and 46% on Glomus aggregatum.     

Bondability of tropical fast-growing tree species I: Indonesian wood species

To estimate the potential bonding performance of bonded wood products from tropical fast-growing tree species, a study on the bondability of Paraserianthes falcataria L. Nielsen, Pinus merkusii Jungh et. De. Vriese, and Acacia mangium Willd from Indonesia was conducted. Two-ply laminations were produced using polyvinyl acetate emulsion (PVAc), urea formaldehyde (UF), resorcinol formaldehyde (RF), and water-based polymer isocyanate (API) adhesives. In order to determine the bonding performance, the block-shear test was applied according to the Japanese Agricultural Standard for structural glued laminated timber under normal conditions and after accelerated-aging treatments. To support this study, the wettability of each wood species was also investigated through contact-angle measurement. The results showed that the bonding performance of low-density P. falcataria was better than that of medium-density P. merkusii and medium-density A. mangium, while the bonding performance of medium-density P. merkusii was better than that of medium-density A. mangium. Furthermore, compared with A. mangium, the small contact angle and good wettability in P. falcataria and P. merkusii result in better adhesion and more intimate contact between the wood surfaces and adhesive.     

穗花杉的转录组测序及其转录组特性分析

[目的]通过对红豆杉科穗花杉属的穗花杉进行转录组测序,为穗花杉的萜类合成途径和分类学研究提供支持。[方法]利用Hi Seq2500技术对穗花杉的茎叶进行转录组测序。[结果]穗花杉转录组测序共得到8.14 Gb的clean data。从头组装共获得82 884条unigene,其中有27 495条unigene被注释。此外,在82 884条unigene中共搜索到2 827个SSR位点,单核苷酸重复SSR出现频率最高(60.1%),其次为三核苷酸重复SSR(25.4%)。在穗花杉unigene中挖掘出了1个牦牛儿基焦磷酸合成酶(GPS)、1个法尼烯基焦磷酸合成酶(FPS)和5个牦牛儿基牦牛儿基焦磷酸合成酶(GGPS)的同源基因,同时得到紫杉二烯合成酶(TS)同源基因13个。[结论]发现了20个与萜类合成有关的unigene和2 827个SSR位点,为今后穗花杉萜类生物合成研究,特别是紫杉二烯合成酶编码基因的研究打下了基础,也为该物种系统分类地位及遗传多样性研究提供了新的遗传信息。     

In situ visualization of hardwood microcracks occurring during drying

Microcracks produced in an Acacia hybrid (Acacia mangium × Acacia auriculiformis) and Melia azedarach during drying were visualized in situ using confocal laser scanning microscopy (CLSM); the morphological differences were compared. In the Acacia hybrid, numerous microcracks were found between the wood fiber and ray parenchyma, which propagated toward both the pith and bark. The microcracks closed with further drying, but persisted until the last stage of drying. In Melia azedarach, however, few microcracks formed between the wood fiber and ray parenchyma in the latewood region; they also propagated toward both the pith and bark. Because the microcracks subsequently closed, some could not be detected by CLSM. These morphological characteristics resulted from differences in the wood structure and we conclude that the interface zone between the wood fiber and ray parenchyma is one type of weak point on the transverse surface that is susceptible to checking.     

Radial variations in the anatomical characteristics and density of the wood of Acacia mangium of five different provenances in Indonesia

The anatomical characteristics and density of wood were examined in 23-year-old Acacia mangium trees that had been planted in Yogyakarta, Indonesia. The seeds had been collected from trees of five different provenances. The distance from the pith of the boundary between juvenile and mature wood was also examined to clarify the maturity of the wood. Lengths of wood fibers near the pith and the distance from the pith of the boundary between juvenile and mature wood differed significantly among provenances. By contrast, other anatomical characteristics of the wood such as fiber wall area, fiber wall thickness, fiber diameter, vessel lumen area, vessel diameter, vessel frequency and wood density did not differ significantly among provenances. Wood density was strongly correlated with the area of fiber walls. Our observations suggest that Sidei and Daintree might be more appropriate provenances among those examined for the Acacia mangium tree-breeding programs in Indonesia that are aimed at improving wood quality, because these provenances are associated with longer initial wood fibers and narrower juvenile areas than the other provenances studied.     

Growth response of <Emphasis Type="Italic">Acacia mangium</Emphasis> Willd. seedlings to arbuscular mycorrhizal fungi and four isolates of the ectomycorrhizal fungus <Emphasis Type="Italic">Pisolithus tinctorius</Emphasis> (Pers.) Coker and Couch

Some Acacia mangium Willd. plantations in Asia grow poorly due to low soil fertility and the absence of compatible mycorrhizal fungi. This legume tree can be colonized by arbuscular mycorrhizal (AM) and ectomycorrhizal (ECM) fungi but inoculation is not routinely practiced. This study aimed to compare the effectiveness of AM fungi and four isolates of the ECM fungus Pisolithus tinctorius (Pers.) Coker and Couch (Pt) in promoting growth of A. mangium seedlings under glasshouse conditions. AM inoculants were: Glomus etunicatum, G. fasciculatum, G. macrocarpum and Gigaspora margarita and mixed species extracted from rhizosphere soil of a Populus stand in Suwon (AMKFRI), and Carex (AMM6) and Populus (AMM7) growing in mine tailings in Korea. Pisolithus isolates were from Philippines (PtPhil) and Korea (PtKFRI, PtMKACC, PtKACC). Generally, ECM fungi promoted height and diameter growth of A. mangium more than the AM inoculants. The Korean Pisolithus increased plant dry weight by 122–145%, mixed AM inoculants by 61–97%, and Glomus and Gigaspora by 45–72% over the control. PtKACC gave the highest root colonization and promoted the highest growth and concentration of most nutrients. Mycorrhizal root colonization was positively correlated with plant dry weight, Na, Fe and Cu concentrations and N, P, K, Ca, Na, Fe and Cu contents. In conclusion, the results provide strong evidence for benefits of mycorrhizal inoculation on A. mangium seedlings under glasshouse conditions. The Korean Pisolithus isolates (particularly PtKACC), and two AM fungi (AMKFRI and AMM6) are potential mycorrhizal inoculants but their effectiveness and persistence should be determined on degraded lands in tropical countries where A. mangium is being planted for rehabilitation.     

Thermal,spectroscopic, and flexural properties of anhydride modified cultivated <Emphasis Type="Italic">Acacia</Emphasis> spp.

The effects of chemical modification on the thermal stability of cultivated Acacia mangium and Acacia hybrid wood species were investigated. Evidence of modification was indicated by increase of weight and was confirmed by Fourier transform infrared analysis (FT-IR). The thermal stability measured by thermogravimetric analysis (TGA) increased after esterification with propionic and succinic anhydrides. Thermal stability of succinylated samples was found to be highest based on the values of on-set degradation temperatures, the temperatures at which 30, 50, and 70% degradation occurred. The observed higher thermal stability of the succinylated and propionylated Acacia wood samples when compared with unmodified wood was attributed to the reduction in hydrophilic nature of the wood due to esterification reaction.     

Positive nitrogen balance of <Emphasis Type="Italic">Acacia mangium</Emphasis> woodlots as fallows in the Philippines based on <Superscript>15</Superscript>N natural abundance data of N<Subscript>2</Subscript> fixation

Nitrogen inputs from biological nitrogen fixation contribute to productivity and sustainability of agroforestry systems but they need to be able to offset export of N when trees are harvested. This study assessed magnitudes of biological nitrogen fixation (natural ¹⁵N abundance) and N balance of Acacia mangium woodlots grown in farmer’s fields, and determined if N₂ fixation capacity was affected by tree age. Tree biomass, standing litter, understory vegetation and soil samplings were conducted in 15 farmer’s fields growing A. mangium as a form of sequential agroforestry in Claveria, Misamis Oriental, Philippines. The trees corresponded to ages of 4, 6, 8, 10 and 12 years, and were replicated three times. Samples from different plant parts and soils (0–100 cm) were collected and analyzed for δ¹⁵N and nutrients. The B-value, needed as a reference of isotopic discrimination when fully reliant on atmospheric N, was generated by growing A. mangium in an N₂-free sand culture in the glasshouse. Isotopic discrimination occurring during N₂ fixation and metabolic processes indicated variation of δ¹⁵N values in the order of nodules > old leaves > young leaves > stems > litterfall and roots of the trees grown in the field, with values ranging from −0.8 to 3.5‰ except nodules which were enriched and significantly different from other plant parts (P < 0.0001). Isotopic discrimination was not affected by tree age (P > 0.05). Plants grown in N free sand culture exhibited the same pattern of isotopic discrimination as plants grown in the field. The estimated B-value for the whole plant of A. mangium was −0.86‰. Mature tree stands of 12 years accumulated up to 1994 kg N ha⁻¹ in aboveground biomass. Average proportion of N derived from N₂ fixation of A. mangium was 54% (±22) and was not affected by age (P > 0.05). Average yearly quantities of N₂ fixed were 128 kg N ha⁻¹ in above-ground biomass amounting to 1208 kg N fixed ha⁻¹ over 12 years. Harvest of 12-year old trees removed approximately 91% of standing aboveground biomass from the site as timber and fuel wood. The resulting net N balance was +151 kg N ha⁻¹ derived from remaining leaves, twigs, standing litter, and +562 kg N ha⁻¹ when tree roots were included in the calculation. The fast growing A. mangium appears to be a viable fallow option for managing N in these systems. However, other nutrients have to be replaced by using part of the timber and fuel wood sales to compensate for large amounts of nutrient removed in order for the system to be sustainable.     

Wood properties of <Emphasis Type="Italic">Pericopsis mooniana</Emphasis> grown in a plantation in Indonesia

The relationships between growth characteristics and wood properties were investigated for a threatened species, Pericopsis mooniana, to promote the establishment of plantations of this species in the tropics. Growth characteristics (diameter and height) and stress-wave velocity (SWV) of trees were measured for 22-year-old P. mooniana trees planted in Indonesia. The trees were categorized into three groups, fast-growing, middle-growing, and slow-growing trees, to investigate the effect of growth rate on the wood properties. In addition, radial variation of anatomical characteristics and wood properties were determined. No significant correlation was found between growth characteristics and SWV. The values for the vessel diameter, cell wall thickness of wood fibers, wood fiber length, basic density, modulus of elasticity, and modulus of rupture from wood at the bark side were higher than those at the pith side. On the other hand, vessel frequency gradually decreased from pith to bark. These results suggested that low-quality wood, such as juvenile wood, existed near the pith area.     

Growth and yield modelling of <Emphasis Type="Italic">Acacia mangium</Emphasis> in Colombia

To study the growth and yield of Acacia mangium in the Caribbean region of Colombia, allometric equations of total volume and aboveground plus coarse roots biomass were fitted as a function of the tree’s diameter at breast height (dbh). The von Bertalanffy’s growth model and 59, 0.1 ha plots (0.55–9.55 years old) were used to develop site index (SI) curves at 6 years base age. Then, using the state-space approach, stand growth and yield models were developed for basal area, volume and biomass. The results show that A. mangium is a very promising species for timber production, atmospheric carbon removal and soil restoration because it grows very fast even in mining degraded soils. On average sites it reaches 15 m in height in 3 years. However, early and reiterated thinning coupled with initial mortality by cattle invasion of the very young understocked plantations are producing relatively low yields.     

The Delignification Pattern of Ailanthus excelsa Wood by Inonotus hispidus (Bull.: Fr.) P. Karst.

In vitro laboratory decay tests on Ailanthus excelsa Roxb. wood revealed that I. hispidus exhibits a combination of both white-rot and soft-rot patterns of wood decay. Early stages of wood decay showed dissolution of the middle lamella as well as defibration and localized delignification of fiber walls; vessels, axial, and ray parenchyma remained unaltered. Delignification commenced from the middle lamellae at the cell corners without any marked effect on the primary and secondary wall layers. In later stages of growth, the species produces typical soft-rot decay pattern by forming erosion channels through the S₂ layers of fiber walls, transverse bore holes in the cell walls, and erosion channels alongside/following the orientation of cellulose microfibrils. The rays showed signs of cell wall alterations only after the extensive damage to the fiber walls. After 120 days of incubation, the vessels also showed localized delignification, the erosion of pits, and separation from associated xylem elements. The extensive weight losses under natural and in vitro decayed wood as well as the very soft nature of severely degraded wood indicate that I. hispidus alters wood strength and stiffness.     

A comparison of agrisilvicultural systems with plantation forestry in the Atlantic Lowlands of Costa Rica

Survival and growth data (ages 0–5 years) are presented for two timber species (Acacia mangium, Cordia alliodora) planted in monocultures or in association with a sequence of agricultural cropsZea mays, Zingiber officinale andEugenia stipitata (a fruit shrub) in the tropical humid Caribbean lowlands of Costa Rica. Average annual height and diameter growth rates were 3.2 m and 4.0 cm (C. alliodora), 3.5 m and 3.8 cm (A. mangium).C. alliodora associated with crops gave the greatest productivity with an average total stem volume increment of 19 m³ ha^–1 yr^–1. Root rot ofA. mangium (mainlyRosellinia sp.), leading to tree mortality, was greater in pure plots compared to associated plots.A. mangium can not be recommended for similar sites because of this problem.     

In vitro shoot apex micrografting of mature Acacia mangium

Prospects for in vitro micrografting shoot apices of mature Acacia mangium trees were investigated with the use of 432 micrografts. Overall success rates of 51.5%s% were obtained for shoot apices ranging from 200 to 400 m in length, and a short basal wedge of underlying tissues top-grafted in aseptic conditions onto 2-to-3-month old in vitro grown Acacia mangium seedlings. The successfully established micrografts displayed, however, substantial variability in terms of further scion elongation as 41% of these micrografts, or 21.2% only of the total amount of the micrografts performed, had resumed growth two months after micrografting. The elongated scions exhibited different types of morphology, ranging from juvenile-like type composed leaves to the predominant mature-like phyllode morphology. Side-grafting, a more difficult procedure to perform than top-grafting, or placing the micrografts for 2 weeks in darkness after grafting, did not improve the scores. Moreover, attempts to micrograft meristems (150–200 m) resulted in 5% success only.     

Asynchronous wood formation in youngAcacia mangium planted in Malaysia

In general, tropical trees have less-distinct growth rings. Even if the trees have some concentric structures, there is little information on the timing of their formation. The objective of this report is to show the asynchronous wood formation from the observation of indistinct, ring-like structures. YoungAcacia mangium planted in Malaysia was investigated for asynchronous wood formation anatomically and macroscopically. Tree heights and girths at breast height for 28 trees were measured every other week. Wood disks from four trees were sampled at breast height for this research. The radial variation of vessel dimensions and the number of cambial cells in different radial directions and the wood anatomy of discontinuous bands were investigated using thin sectioning and soft radiographic methods. The vessel dimension was quite different in their radial variation even for four radial directions with a similar radius. There was a large variation in the number of cambial cells among radial directions in youngAcacia mangium. Bands of low density included a layer of vessels aligned in a spiral rather than in a closed circle.     

Growth and wood basic density of acacia hybrid clones at three locations in Vietnam

Field trials testing a total of 27 clones of the interspecific hybrid Acacia mangium × A. auriculiformis and seedling controls of the parental species were established at Ba Vi and Yen Thanh in the north of Vietnam and Long Thanh in the south. At both Ba Vi and Yen Thanh there were significant (P < 0.001) differences in height and diameter at breast height (DBH) among 22 tested clones at 4 years. At Long Thanh, twelve hybrid clones did not differ significantly in DBH at age 3 years, but did (P < 0.001) at age 5 years. At the two northern sites the acacia hybrid clones had significantly greater DBH than control seedlots of the parental species. At Long Thanh, DBH of the hybrid clones and A. mangium was similar, with a genetically improved seedlot of A. mangium displaying the best DBH. Mean wood basic density at breast height of the acacia hybrid clones was 539 kg m⁻³ at Yen Thanh at age 8 years, and 473 kg m⁻³ at Long Thanh at age 5 years; density for A. mangium at Long Thanh was only slightly lower than the hybrid clones at 461 kg m⁻³. Linear regressions of Pilodyn penetration (PP) at breast height on wood basic density explained 60% of the variance in density of treatments (clones and control seedlots) at Yen Thanh and 36% at Long Thanh. There were significant differences between hybrid clones in PP at all three trial sites. Clonal DBH performance was not strongly correlated across the three trial sites; Pearson correlations of clone mean DBH between pairs of sites ranged from −0.47 to 0.20. Clonal rankings for PP were more stable, with Pearson correlations between pairs of sites ranging from r = 0.71 to 0.78.     

Radial variations of wood properties in <Emphasis Type="Italic">Casuarina equisetifolia</Emphasis> growing in Bangladesh

Radial variations of wood properties (basic density, fiber length, vessel element length, and compression strength) in plantation-grown Casuarina equisetifolia in Bangladesh were investigated for effective utilization of the wood. Samples disks at breast height were randomly collected from trees in a 10-year-old plantation in Cox’s Bazar Forest Division, Bangladesh. The basic density showed a near-constant value up to 30 mm from the pith and then rapidly increased up to 60 mm from the pith. The fiber length and vessel element length gradually increased from the pith to bark. When radial variation of wood properties was determined according to relative distance from the pith, similar radial patterns were observed among the sample trees, indicating that the wood properties in C. equisetifolia may be related to the growth rate. The compression strength parallel to the grain (CS) increased from the pith to bark. A significant positive correlation was found between the air-dried density and the CS. The results obtained indicated that wood around the pith has a relatively low density, and wood outside the pith area has a relatively high density, suggesting that it could be used as structural lumber. Part of this report was presented at the 58th Annual Meeting of Japan Wood Research Society, Tsukuba, March 2008     

First report of 16Sr II‐C subgroup phytoplasma association with Acacia mangium in Tripura,India

Leaf yellowing symptoms were observed on Acacia mangium in the Sipahijala district of Tripura, India, during June 2017. Symptomatic and asymptomatic leaf samples (three of each) were collected from roadside trees of A. mangium for DNA extraction using the CTAB method. Amplicons of ~1.25 kb and ~480 bp were detected in all the symptomatic samples using the phytoplasma‐specific universal 16S rRNA and secA gene primers. Pair wise sequence analysis of 16S rRNA gene sequences, virtual RFLP and phylogenetic analysis revealed that the phytoplasma strain associated with A. mangium belonged to phytoplasma subgroup 16SrII‐C. This is the first report of an association between the 16SrII‐C subgroup and A. mangium leaf yellowing.