Physicochemical and Rheological Properties of Chinese Soft Wheat Flours and Their Relationships with Cookie‐Making Quality

The relationship of solvent retention capacity (SRC) values with four solvents, alveograph and farinograph properties, and cookie‐baking performance was evaluated with 20 Chinese soft wheat genotypes, including four cultivars and 16 advanced lines grown in the 2009–2010 season. Significant positive correlations were observed between water SRC (WSRC), sodium carbonate SRC (SOSRC), lactic acid SRC, and sucrose SRC (SUSRC) values. WSRC, SUSRC, and SOSRC showed significant positive correlations with farinograph water absorption (WA), alveograph P (tenacity), and P/L (ratio of tenacity to extensibility). Cookie diameter was significantly correlated with wet gluten (r = –0.491, P < 0.05), WSRC (r = –0.882, P < 0.001), SUSRC (r = –0.620, P < 0.01), SOSRC (r = –0.712, P < 0.001), P (r = –0.787, P < 0.001), L (r = 0.616, P < 0.01), P/L (r = –0.766, P < 0.001) and WA (r = –0.620, P < 0.01), respectively. SRC values were effective predictors of cookie quality in Chinese soft wheat. Alveograph parameters were more closely correlated to cookie quality than were farinograph parameters.     

Relationship Between Physicochemical Properties of Wheat Flour,Wheat Protein Composition,and Textural Properties of Cooked Chinese White Salted Noodles

Physicochemical properties and protein composition of 39 selected wheat flour samples were evaluated and correlated with the textural properties of Chinese hard‐bite white salted noodles. Flour samples were analyzed for their protein and wet gluten contents, sedimentation volume, starch pasting properties, and dough mixing properties by farinograph and extensigraph. Molecular weight distribution of wheat flour proteins was determined with size‐exclusion (SE) HPLC, SDS‐PAGE, and acid‐PAGE. Textural properties of Chinese hard‐bite white salted noodles were determined through texture profile analysis (TPA). Hardness, springiness, gumminess, and chewiness of cooked noodles were found to be related to the dough mixing properties. Both protein content and protein composition were found to be related to TPA parameters of noodles. The amount of total flour protein was positively correlated to hardness, gumminess, and chewiness of noodles. The absolute amounts of different peak proteins obtained from SE‐HPLC data showed positive correlations with the hardness, gumminess, chewiness, and springiness of noodles. The proportions of these peak proteins were, however, not significantly related to texture parameters. The proportions of low‐molecular‐weight glutenins/gliadins and albumins/globulins, as observed from SDS‐PAGE, were correlated positively and negatively, respectively, to the hardness, gumminess, and chewiness of cooked noodles. Among the alcohol‐soluble proteins (from acid‐PAGE data), β‐gliadins showed strong correlations with the texture properties of cooked noodles. For the selected flour samples, the total protein content of flour had a stronger relationship with the noodle texture properties than did the relative proportion of different protein subgroups. Prediction equations were developed for TPA parameters of cooked noodles with SE‐HPLC and rapid visco analysis data of the 30 flour samples, and it was found that about 75% of the variability in noodle hardness, gumminess, and chewiness values could be explained by protein composition and flour pasting properties combined together. About 50% of the variations in cohesiveness and springiness were accounted for by these prediction equations.     

Relationship Between Protein Characteristics and Instant Noodle Making Quality of Wheat Flour

We investigated the relationship between the protein content and quality of wheat flours and characteristics of noodle dough and instant noodles using 14 hard and soft wheat flours with various protein contents and three commercial flours for making noodles. Protein content of wheat flours exhibited negative relationships with the optimum water absorption of noodle dough and lightness (L*) of the instant noodle dough sheet. Protein quality, as determined by SDS sedimentation volume and proportion of alcohol‐ and salt‐soluble protein of flour, also influenced optimum water absorption and yellow‐blueness (b*) of the noodle dough sheet. Wheat flours with high protein content (>13.6%) produced instant noodles with lower fat absorption, higher L*, lower b*, and firmer and more elastic texture than wheat flours with low protein content (<12.2%). L* and free lipid content of instant noodles were >76.8 and <20.8% in hard wheat flours of high SDS sedimentation volume (>36 mL) and low proportion of salt‐soluble protein (<12.5%), and <75.7 and >21.5% in soft wheat flours with low SDS sedimentation volume (<35 mL) and a high proportion of salt‐soluble protein (>15.0%). L* of instant noodles positively correlated with SDS sedimentation volume and negatively correlated with proportion of alcohol‐ and salt‐soluble protein of flour. These protein quality parameters also exhibited a significant relationship with b* of instant noodles. SDS sedimentation volume and proportion of salt‐soluble protein of flours also exhibited a significant relationship with free lipid content of instant noodles (P < 0.01 and P < 0.001, respectively). Protein quality parameters of wheat flour, as well as protein content, showed significant relationship with texture properties of cooked instant noodles.     

Suitability of Ontario‐Grown Hard and Soft Wheat Flour Blends for Noodle Making

This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle‐making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than standard noodle flour. Below a 20% blend ratio with HWF, no significant changes were seen on dough extensibility, cooking loss, tensile properties, and bite testing parameters of cooked noodles. It can be concluded that blending HWF up to a 20% level caused no significant change in the processing properties of dough and cooked noodle quality. The results also showed that the GlutoPeak tester is a sensitive tool for evaluating gluten strength in wheat flour.     

Solvent Retention Capacities of Indian Wheats and Their Relationship with Cookie‐Making Quality

Ninety‐two wheat genotypes including 50 cultivars released in India and 42 germplasm lines were subjected to solvent retention capacity (SRC) tests using 1 g of flour and 1 g of whole meal to see the relationship with cookie‐making quality and the utility in breeding programs. Very high negative correlations (P < 0.001) were observed between cookie diameter and spread factor and alkaline water retention capacity (AWRC), and solvent retention capacities of both flour and whole meal samples. Multiple regression analysis showed that AWRC explained 43.8%, sodium carbonate SRC 27.3%, lactic acid SRC 15.1%, and protein content 13.8% of the total variability (multiple r = 0.87) in cookie diameter. Total variability (multiple r = 0.85) in spread factor was explained 40.3% by AWRC, 27.4% by SODSRC, 14.5% by LASRC, and 17.8% by protein content. When the technique was further used to reduce the number of parameters contributing to cookie diameter, AWRC explained 67.2% of the total variability (multiple r = 0.85) and the rest by lactic acid SRC and protein content. Surprisingly, multiple regression analysis of whole meal samples exhibited that lactic acid SRC and sodium carbonate SRC explained 88 and 12%, respectively, of the total variability (multiple r = 0.76) in cookie diameter and 78 and 22%, respectively, of the total variability (multiple r = 0.71) in spread factor. Among the soft wheat flour samples selected based on W > 7.70 cm, pentosan content as revealed by sucrose SRC explained 87.7% of the total variability (multiple r = 0.54) of cookie diameter and 83.8% of total variability (multiple r = 0.52) in spread factor. Clustering of genotypes based on SRC profiles using both flour and whole meal produced clusters with similar average cookie diameter and spread factor. The data clearly demonstrate that whole meal tests can be used in screening the recombinant lines as well as in selecting desirable genotypes for making crosses to enhance cookie‐making quality.     

Nutritional Profile of Whole‐Grain Soft Wheat Flour

Whole‐grain wheat flour is used in baking to increase fiber content and to provide vitamins from the bran layers of the kernel. We surveyed whole‐grain soft flour samples from North America to determine the nutritional profile using recently revised fiber quantification protocols, Codex 2009.1. Standard compositional and vitamin analyses were also included in the survey. Three separate studies were included in the survey: sampling of commercial whole‐grain soft wheat flour, a controlled study of two cultivars across three years and two locations, and a regional study of soft white and soft red grain from commercial grain production. The Codex method for fiber measurement estimated total fiber concentration in the commercial sampling at 15.1 g/100 g, dry weight basis (dwb). In the controlled research trial, the largest source of variation in total fiber concentration was attributed to year effects, followed by genotype effects. For the two locations used in this study, location effects on fiber concentration were significant but an order of magnitude less important than the year and genotype effects. The third study of regional variation within North America found limited variation for total fiber, with the resistant oligosaccharide fraction having the greatest variation in concentration. When all three studies were combined into a meta‐analysis, the average total fiber concentration was 14.8 g/100 g dwb. In the meta‐analysis, concentrations of folate, thiamin, riboflavin, niacin, and pyridoxine were lower than in previous summary reports. Vitamin E and pantothenic acid were the exceptions, with concentrations that were nearly identical to previous standard reports. Several other recent studies also point to current cultivars and production systems as producing lower concentrations of the essential vitamins than previously reported. The results suggest that vitamin concentrations in diets of populations using grain‐based diets from modern cereal‐production systems may require review to determine if previous assumptions of vitamin consumption are accurate.     

Investigation of Digestibility In Vitro and Physicochemical Properties of A‐ and B‐Type Starch from Soft and Hard Wheat Flour

In this study, the functional properties of A‐ and B‐type wheat starch granules from two commercial wheat flours were investigated for digestibility in vitro, chemical composition (e.g., amylose, protein, and ash content), gelatinization, retrogradation, and pasting properties. The branch chain length and chain length distribution of these A‐ and B‐type wheat starch granules were also determined using high‐performance anion exchange chromatography (HPAEC). Wheat starches with different granular sizes not only had different degrees of enzymatic hydrolysis and thermal and pasting properties, but also different molecular characteristics. Different amylose content, protein content, and branch chain length of amylopectin in A‐ and B‐type wheat starch granules could also be the major factors besides granular size for different digestibility and other functional properties of starch. The data indicate that different wheat cultivars with different proportion of A‐ and B‐type granular starch could result in different digestibility in wheat products.     

Creep‐Recovery of Wheat Flour Doughs and Relationship to Other Physical Dough Tests and Breadmaking Performance

Measurements of creep‐recovery of flour‐water doughs were made using a dynamic mechanical analyzer (DMA) in a compression mode with an applied probe force of 50 mN. A series of wheat flour and blend samples with various breadmaking potentials were tested at a fixed water absorption of 54% and farinograph optimum water absorption, respectively. The flour‐water doughs exhibited a typical creep‐recovery behavior of a noncross‐linked viscoelastic material varying in some parameters with flour properties. The maximum recovery strain of doughs with a fixed water absorption of 54% was highly correlated (r = 0.939) to bread loaf volume. Wheat flours with a large bread volume exhibited greater dough recovery strain. However, there was no correlation (r = 0.122) between maximum creep strain and baking volume. The maximum recovery strain of flour‐water doughs also was correlated to some of the parameters provided by mixograph, farinograph, and TA‐XT2 extension.     

Relationship Between Objective and Subjective Wheat Flour Tortilla Quality Evaluation Methods

Accurate determination of tortilla quality is imperative because of the growing market. This calls for quality tests that are replicable. However, current tortilla quality testing relies heavily on subjective tests with unknown reliability. This study aimed to determine the relationship between subjective tortilla quality testing and available objective methods, and assess whether the latter can potentially replace the former. Correlation and regression analyses were done using data on subjective opacity and rollability, and objective L* value and texture parameters based on 114 wheat samples. Opacity scores and L* values were significantly correlated, but this relationship was affected by evaluator experience; in a controlled setting, experienced evaluators scores were more reliable (SEM = ±0.25 – 3.8, r = 0.96) than less experienced evaluators (SEM = ±0.25 – 7.3, r = 0.92). Tortilla rollability, which approximates shelf stability, correlated most strongly with the rupture distance from two‐dimensional extensibility test (r = 0.77). Subjective rollability at day 16 of storage was predicted by rupture distance (day 0) and work (day 4) (R² = 0.69). Adding rupture force to the model slightly improves the R² to 0.72. Objective color and texture parameter measurements have a potential to replace the subjective tests as primary methods for tortilla quality.     

Physicochemical and Rheological Characterization of Wheat Flour Dough

Rheological and structural behavior of dough prepared with two Argentinean flours (FI and FII) of different dough extensibilities were studied. Flours were analyzed by composition and rheological assays. Structural properties of dough prepared at different mixing times were analyzed by scanning electron microscopy, free sulfhydryls quantification, and yield of different protein fractions, as well as their protein surface hydrophobicity. Size of high molecular weight glutelin soluble aggregates was analyzed through multistacking gel electrophoresis. Dynamic viscoelasticity of dough was also studied. Flours FI and FII presented similar physicochemical properties but different rheological properties. Structural properties of both flour components were different. Starch from FI flour generated a more viscous paste than that of FII. FI presented a higher glutenin‐to‐gliadin ratio and a higher content of free sulfhydryls than FII. The resulting dough of FI showed a high development time and was more stable than FII. FI contained a high proportion of soluble HMW glutenins and formed dough with a more depolymerized insoluble protein residue containing a lower amount of gliadin in its matrix than FII. FI also formed a more elastic and stable dough with higher development time than FII. The specific structural characteristic of FI turns this flour into suitable raw material for the preparation of different bakery products in which elasticity of dough would be an important functional property.     

Baking Performance of Durum and Soft Wheat Flour in a Sponge-Dough Breadmaking Procedure

Breadmaking properties were determined for formulations that included durum, soft, and spring wheat flour, using a pound-loaf sponge-dough baking procedure. Up to 60% durum or soft wheat flour plus 10% spring wheat flour could be incorporated at the sponge stage for optimum dough-handling properties. At remix, the dough stage required 30% spring wheat flour. Bread made with 100% spring wheat flour was used as a standard for comparison. Bread made with 60% durum flour exhibited internal crumb color that was slightly yellow. When storing pound bread loaves for 72 hr, crumb moisture content remained unchanged. Crumb firmness and enthalpy increased the most in bread made with 60% soft wheat flour. Crumb firmness increased the least in bread made with 100% spring wheat flour. Enthalpy changed the least in bread made with 60% durum flour. Crumb moisture content was significantly correlated with crumb firmness (r = -0.82) and enthalpy (r = -0.65). However, crumb moisture content was specific for each type of flour and a function of flour water absorption; therefore, these correlations should be interpreted with caution. Crumb firmness and enthalpy were significantly correlated (r = 0.65). Ball-milling flour resulted in an increase in water absorption of ≈2% and in crumb moisture content of ≈0.5% but had no effect on either crumb firmness or enthalpy.     

Effect of High‐Molecular‐Weight Glutenin Subunit Allelic Composition on Wheat Flour Tortilla Quality

Wheat cultivars possessing quality attributes needed to produce optimum quality tortillas have not been identified. This study investigated the effect of variations in high‐molecular‐weight glutenin subunits encoded at the Glu‐1 loci (Glu‐A1, Glu‐B1, and Glu‐D1) on dough properties and tortilla quality. Flour protein profiles, dough texture, and tortilla physical quality attributes were evaluated. Deletion at Glu‐D1 resulted in reduced insoluble polymeric protein content of flour, reduced dough compression force, and large dough extensibility. These properties produced very large tortillas (181 mm diameter) compared with a control made with commercial tortilla wheat flour (161 mm). Presence of a 7 + 9 allelic pair at Glu‐B1 increased dough strength (largest compression force, reduced extensibility, and small‐diameter tortillas). Deletion at Glu‐A1 produced large tortillas (173 mm) but with unacceptable flexibility during storage (score <3.0 at day 16). In general, presence of 2* at Glu‐A1, in combination with 5 + 10 at Glu‐D1, produced small‐diameter tortillas that required large force to rupture (tough texture). Presence of 2 + 12 alleles instead of 5 + 10 at Glu‐D1 produced tortillas with a good compromise between diameter (>165 mm) and flexibility during storage (>3.0 at day 16). These allele combinations, along with deletion at Glu‐D1, show promise for tortilla wheat development.     

Composition,Functional Properties,Starch Digestibility,and Cookie‐Baking Performance of Dry Bean Powders from 25 Michigan‐Grown Varieties

The chemical composition, functional properties, starch digestibility, and cookie‐baking performance of bean powders from 25 edible dry bean varieties grown in Michigan were evaluated. The beans were ground into coarse (particle size ≤1.0 mm) or fine (≤0.5 mm) powders. Starch and protein contents of the bean powders varied between 34.4 and 44.5% and between 19.1 and 26.6% (dry basis [db]), respectively. Thermal properties, pasting properties, and water‐holding and oil‐binding capacities of the bean powders differed and were affected by particle size. After blending the bean powders with corn starch (bean/starch = 7:3, db), the blends were used for cookie baking following a standard method ( 1 Approved Method 10‐54.01). Generally, the cookies baked from the fine bean powders had smaller diameters, greater thicknesses, and greater hardness values than those from the coarse counterparts. Differences in the cookie‐baking performances of the bean powders were observed among the 25 varieties. Larger proportions of resistant starch (RS) were retained in the bean‐based cookies (54.7–126.7%) than in the wheat‐flour‐based cookies (10.4–19.7%) after baking. With higher contents of RS and protein, the bean‐based cookies had more desirable nutritional profiles than those baked from wheat flour alone.     

Exploring Functionality of Hard and Soft Wheat Flour Blends for Improved End‐Use Quality Prediction

Blending wheat or flour to meet end‐use requirements is a critical part of the production process to deliver consistent quality products. The functionality of commercial Canadian hard red wheat flour (HWF) and soft red wheat flour (SWF) blends with ratios of 100:0, 75:25, 50:50, 25:75, and 0:100 (HWF/SWF, w/w) was investigated with new and standard methods to discern which functional properties may be indicators of bread quality and processing performance. Rheological characteristics including farinograph water absorption behavior, dough development time (DT), stability, extensigraph extensibility, and gluten aggregation of wheat flours were significantly influenced by the proportion of HWF in blends of SWF and HWF (P < 0.05). The SWF content in the blends had negative linear relationships with the protein content, lactic acid solvent retention capacity, water absorption, and GlutoPeak peak torque. Polynomial relationships were observed for sodium dodecyl sulfate sedimentation volume, DT, stability, extensibility, resistance, GlutoPeak peak time, and bread loaf volume with the amount of SWF in blends. The results indicate that linear responses may be more closely tied to protein content, whereas polynomial responses may be more indicative of protein quality and baking performance. The GlutoPeak peak time was sensitive to the addition of HWF in the blends, showing a significant change in gluten aggregation kinetics between the 0 and 25% HWF samples. Principal component analysis (PCA) confirmed that GlutoPeak peak time was a significant factor in differentiating the 0% HWF. Protein secondary structures identified in the final baked bread were also PCA factors differentiating the 0% HWF sample. Although the 0% bread sample did not deviate from the observed polynomial trend for bread loaf volume, the differences in bread protein secondary structures may translate into differences in processing tolerance in commercial settings.     

Distribution of Protein Composition in Bread Wheat Flour Mill Streams and Relationship to Breadmaking Quality

Wheat protein quantity and composition are important parameters for wheat baking quality. The objective of this study was to use fractionation techniques to separate the proteins of flour mill streams into various protein fractions, to examine the distribution of these protein fractions, and to establish a relationship between protein composition and breadmaking quality. Nine break streams, nine reduction streams, and three patent flours obtained from three samples of Nekota (a hard red winter wheat) were used in this study. A solution of 0.3M NaI + 7.5% 1-propanol was used to separate flour protein into monomeric and polymeric proteins. The protein fractions, including gliadin, albumin+globulin, HMW-GS, and LMW-GS, were precipitated with 0.1M NH₄Ac-MeOH or acetone. The fractions were statistically analyzed for their distribution in the mill streams. The quantities of total flour protein and protein fractions in flour were significantly different among mill streams. The ratio of polymeric to monomeric proteins in break streams was significantly greater than in the reduction streams. The relationship between protein composition and breadmaking quality showed that the quantities of total flour protein, albumin+ globulin, HMW-GS, and LMW-GS in flour were significantly and positively correlated with loaf volume. The ratio of HMW-GS to LMW-GS had little association with loaf volume. The gliadin content in total flour protein was negatively and significantly correlated with loaf volume. These results indicated that the quantity and composition of protein among the mill streams was different, and this resulted in differences in breadmaking quality.     

Formation of Homopolymers and Heteropolymers Between Wheat Flour and Several Protein Sources by Transglutaminase‐Catalyzed Cross‐Linking

The effect of different protein sources (soy flour, lupin flour, egg albumin, gelatin powder, protein‐rich beer yeast flour) on wheat dough functionality was tested by determining gluten index, texture properties, and thermomechanical parameters. Transglutaminase (TG) was also added to improve the dough functionality by forming cross‐links. The presence of protein sources had a significant effect on the gluten index, with the exception of lupin flour. Gelatin and the presence of TG resulted in significant single effects on the texture properties of the wheat‐protein dough. All the protein sources significantly modified the mixing characteristics of the dough or the thermal behavior. Capillary electrophoresis studies of the water‐soluble, salt‐soluble, and glutenin proteins indicated that interactions were mainly within proteins, thus homologous polymers. Scanning electron microscopy studies of the doughs made from blends of wheat and protein sources doughs supported the formation of heterologous structures in the wheat‐lupin blends. The combination of TG and lupin would be a promising method to be used on the treatment of insect‐damaged or weak flours, to increase the gluten strength.     

Soft Wheat Starch Pasting Behavior in Relation to A‐ and B‐type Granule Content and Composition

Flours of two soft wheat cultivars were fractionated into native, prime, tailing, A‐, and B‐type starch fractions. Starch fractions of each cultivar were characterized with respect to A/B‐type granule ratio, amylose content, phosphorus level (lysophospholipid), and pasting properties to investigate factors related to wheat starch pasting behavior. While both cultivars exhibited similar starch characteristics, a range of A‐type (5.7– 97.9%, db) and B‐type granule (2.1–94.3%, db) contents were observed across the five starch fractions. Though starch fractions displayed only subtle mean differences (<1%) in total amylose, they exhibited a range of mean phosphorus (446–540 μg/g), apparent amylose (18.7–23%), and lipid‐complexed amylose (2.8–7.5%) values, which were significantly correlated with their respective A‐ and B‐type granule contents. A‐type (compared with B‐type) granules exhibited lower levels of phosphorus, lipid‐complexed amylose, and apparent amylose, though variability for the latter was primarily attributed to starch lipid content. While starch phosphorus and lipid‐complexed amylose contents exhibited negative correlation with fraction pasting attributes, they did not adequately account for starch fraction pasting behavior, which was best explained by the A/B‐type granule ratio. Fraction A‐type granule content was positively correlated with starch pasting attributes, which might suggest that granule size itself could contribute to wheat starch pasting behavior.     

Evaluation of a New Viscometer Performance in Predicting the Technological Quality of Soft Wheat Flour

Gluten aggregation properties were investigated by means of the GlutoPeak device, a viscometer recently proposed as a rapid and sensitive test for measurement of wheat flour technological performance. In this study, 62 soft wheat flour samples of different quality and end use were utilized to evaluate if the GlutoPeak parameters could adequately predict chemical and rheological characteristics of soft wheat flour dough, that is, protein content measured by the Kjeldahl method, dough strength measured by a Chopin alveograph, and dough stability and water absorption measured by a Brabender farinograph. Linear correlation analysis showed that most GlutoPeak curve parameters were strongly correlated with protein content, dough strength, and water absorption. The statistical models, obtained by a stepwise multiple regression method, showed the GlutoPeak device to be a promising tool to characterize wheat flour (R_adj² = 0.84 for protein content, R_adj² = 0.71 for dough strength, and R_adj² = 0.67 for water absorption). The rather high accuracy of the prediction models for the three mentioned parameters confirmed that GlutoPeak parameters are well correlated with other frequently used flour quality parameters and are able to describe flour technological performance.     

Molecular Level Protein Composition of Flour Mill Streams from a Pilot‐Scale Flour Mill and Its Relationship to Product Quality

Flour mill streams prepared from two Australian and two New Zealand wheat cultivars using a pilot‐scale roller mill were analyzed for rheological and baking quality characteristics and for protein composition using size‐exclusion HPLC. Differences in mill stream protein composition, on an industrially relevant scale, and the relationships between the distribution of proteins (and their degree of thiol exposure) and the technological quality of the flour mill streams were examined. Consistent, significant differences were observed in the physicochemical and processing characteristics of the flour streams. Between mill streams, changes in the quantities of the storage protein groups were more marked than for nonstorage protein groups. Changes in protein composition differed between the break and reduction stream flours. In contrast, the degree of exposure of thiol groups on the various protein groups followed different patterns between mill streams. Numerous significant relationships were observed between dough mixing and product baking tests and the composition and thiol exposure state of the various protein classes. These relationships are discussed in context of manipulating the processing quality of flour‐based products using mill streaming. A possible role for exposed thiol groups on storage proteins in the phenomenon of flour “aging” is suggested.     

Relationship Between Physicochemical Properties of Starches and White Salted Noodle Quality in Japanese Wheat Flours

This study describes the effect of starch properties of Japanese wheat flours on the quality of white salted noodles (WSN). Starch was isolated from 24 flours of 17 Japanese cultivars and amylose content was determined along with pasting properties by Rapid Visco Analyser (RVA), thermal properties by differential scanning calorimetry (DSC), and the distribution of amylopectin chain length by high‐performance anion exchange chromatography (HPAEC). Twenty flours were used to prepare WSN. As expected, 5–6% lower amylose content was associated with good WSN quality (higher scores in softness, elasticity, and smoothness). RVA analysis indicated that the pasting temperature had the greatest influence on WSN quality, while breakdown and setback showed slight effects on WSN quality. DSC results showed that lower endothermal enthalpy (ΔH) in the amylose‐lipid complex was associated with good WSN quality. Chainlength distribution of amylopectin by HPAEC was not an important factor in relation to WSN quality.