Computer-assisted surgery for screw insertion into the distal sesamoid bone in horses: an in vitro study

OBJECTIVE: To compare the precision of computer-assisted surgery with a conventional technique (CV) using a special guiding device for screw insertion into the distal sesamoid bone in horses. STUDY DESIGN: In vitro experimental study. SAMPLE POPULATION: Cadaveric forelimb specimens. METHODS: Insertion of a 3.5 mm cortex screw in lag fashion along the longitudinal axis of intact (non-fractured) distal sesamoid bones was evaluated in 2 groups (8 limbs each): CV and computer-assisted surgery (CAS). For CV, the screw was inserted using a special guiding device and fluoroscopy, whereas for CAS, the screw was inserted using computer-assisted navigation. The accuracy of screw placement was verified by radiography, computed tomography, and specimen dissection. RESULTS: Surgical precision was better in CAS compared with CV. CONCLUSION: CAS improves the accuracy of lateromedial screw insertion, in lag fashion, into the distal sesamoid bone. CLINICAL RELEVANCE: The CAS technique should be considered for improved accuracy of screw insertion in fractures of the distal sesamoid bone.     

Comparison of computer assisted surgery with conventional technique for treatment of abaxial distal phalanx fractures in horses: an in vitro study

Objective— To (1) evaluate and compare computer-assisted surgery (CAS) with conventional screw insertion (conventional osteosynthesis [COS]) for treatment of equine abaxial distal phalanx fractures; (2) compare planned screw position with actual postoperative position; and (3) determine preferred screw insertion direction.
Study design— Experimental study.
Sample population— Cadaveric equine limbs (n=32).
Methods— In 8 specimens each, a 4.5 mm cortex bone screw was inserted in lag fashion in dorsopalmar (plantar) direction using CAS or COS. In 2 other groups of 8, the screws were inserted in opposite direction. Precision of CAS was determined by comparison of planned and actual screw position. Preferred screw direction was also assessed for CAS and COS.
Results— In 4 of 6 direct comparisons, screw positioning was significantly better with CAS. Results of precision analysis for screw position were similar to studies published in human medicine. None of evaluated criteria identified a preferred direction for screw insertion.
Conclusion— For abaxial fractures of the distal phalanx, superior precision in screw position is achieved with CAS technique compared with COS technique.
Clinical Relevance— Abaxial fractures of the distal phalanx lend themselves to computer-assisted implantation of 1 screw in a dorsopalmar (plantar) direction. Because of the complex anatomic relationships, and our results, we discourage use of COS technique for repair of this fracture type.     

Axial compression generated by cortical and cancellous lag screws in the equine distal phalanx

Lag screw fixation using single 4.5 mm cortical bone screws is a recommended technique for repair of mid-sagittal plane fractures of the distal phalanx in adult horses. However, implant infection and technical difficulties in obtaining adequate interfragmentary compression have made this surgical procedure somewhat controversial. We hypothesized that use of larger diameter screws would result in increased axial compression and improved stability of this fracture.Paired distal phalanges from the forelimbs of 10 adult horses were collected at necropsy and divided in half in the midsagittal plane. Using a randomized block study design, four types of bone screws (4.5 mm cortical, 5.5 mm cortical, 6.5 mm cancellous pre-tapped, and 6.5 mm cancellous non-tapped) were inserted to a depth of 15 mm. During screw insertion, the axial force generated under the screw head was measured with a load washer containing a piezoelectric force transducer, while torque of insertion was recorded with a torsional testing machine. The 6.5mm screw inserted after pre-tapping generated significantly greater axial force (2781 N) than the 4.5 mm (1522 N), 5.5 mm (2073 N) or 6.5 mm non-tapped (2295 N) screws. The relationship between maximal applied torque and axial force generated was linear for each screw type. Each unit of torque applied during insertion of cortical screws resulted in a greater increase in axial compression, as compared to cancellous screws. These data suggest that use of larger diameter screws would result in improved interfragmentary compression of distal phalangeal fractures.     

Arthrodesis of the equine proximal interphalangeal joint: a mechanical comparison of 2 parallel 5.5 mm cortical screws and 3 parallel 5.5 mm cortical screws

OBJECTIVE: To compare the biomechanical characteristics and mode of failure of 2 techniques using parallel 5.5 mm screws for pastern joint arthrodesis in horses. STUDY DESIGN: Randomized block design, for horse (1-5), method of fixation (two 5.5 mm screws versus three 5.5 mm screws), side (right, left), and end (front, hind). Constructs were tested to failure in 3-point bending. SAMPLE POPULATION: Twenty limbs (5 cadavers). METHODS: A combined aiming device was used to facilitate screw placement. Two parallel 5.5 mm screws were inserted in lag fashion in 1 limb of a pair, and three 5.5 mm screws were inserted in the contralateral limb. Constructs were then tested in 3-point bending in a dorsal-to-palmar (plantar) direction using a materials testing machine at a loading rate of 19 mm/s. Maximal bending moment at failure and stiffness were obtained from bending moment-angular deformation curves. RESULTS: There was no significant difference between two and three 5.5 mm screw constructs for bending moment and stiffness (P<.05). All constructs ultimately failed by bone fracture or screw bending. For proximal interphalangeal (PIP) joint arthrodesis constructs loaded in 3-point bending, no significant effect of treatment, side, or end on maximal bending moment or stiffness was detected. CONCLUSIONS: Two 5.5 mm cortical screws inserted in parallel should provide a surgically simpler and equally strong PIP joint arthrodesis compared with three 5.5 mm cortical screws. CLINICAL RELEVANCE: Two 5.5 mm cortical screws inserted in parallel for PIP joint arthrodesis should perform similarly under conditions used in this study, as three 5.5 mm screws inserted in a similar manner, when loaded under bending.     

A Lateral Approach for Screw Repair in Lag Fashion of Spiral Third Metacarpal and Metatarsal Medial Condylar Fractures in Horses

Objective— To describe a lateral approach for screw fixation in lag fashion of simple spiral medial condylar fractures of the third metacarpus/metatarsus (MC3/MT3).
Study Design— Case series.
Animals— Thoroughbred racehorses (n=9).
Methods— Nondisplaced medial MC3/MT3 condylar fractures (3 thoracic, 6 pelvic limbs), with mean length 126 mm (range, 91–151 mm) were repaired by internal fixation, under general anesthesia, using multiple 4.5 mm cortical screws inserted in lag fashion from the lateral aspect of the limb, using radiographic or fluoroscopic guidance. Horses were recovered from anesthesia in half-limb casts; 7 unassisted and 2 using a rope-recovery system. Horses had 2 months box rest, 1 month in-hand walking, and follow-up radiographic examination at 3 months.
Results— Horses recovered uneventfully from anesthesia. Five horses raced; 1 returned to training, was persistently lame, and was retired to stud; 2 were retired directly to stud; and 1 horse was lost to follow-up.
Conclusions— MC3/MT3 medial condylar fractures were successfully repaired by screws inserted n lag fashion form the lateral aspect.
Clinical Relevance— Use of a lateral approach to medial condylar MC3/MT3 fractures allows screw insertion perpendicular to the fracture plane without interference with palmar/plantar soft tissue structures or from the splint bones. Although repair was performed under general anesthesia, the technique should be adaptable to application in standing horses.     

Holding Power of Orthopedic Screws Comparison of Self-tapped and Pre-tapped Screws in Foal Bone

Comparison was made of the holding power of orthopedic screws inserted self-tapped or after pre-tapping in foal bone. Third metacarpal and metatarsal bones were used. Comparative trials were made between screws inserted at the same site in the corresponding bones from the contralateral limbs of the same foal. A MTS servohydraulic tensile testing machine was used to perform screw pullouts at a displacement rate of 19 mm/sec. The 5.5 mm cortical screws had significantly greater holding power than 6.5 mm cancellous screws when both were inserted self-tapped (p = 0.0056). Pre-tapped insertion of 5.5 mm screws produced a significantly greater holding power than self-tapped insertion of 5.5 mm screws (p = 0.018). Pre-tapped insertion of 6.5 mm screws produced a significantly greater holding power than self-tapped insertion of 6.5 mm screws (p = 0.0000). In internal fixation of fractures in foals, insertion of 5.5 mm and 6.5 mm screws pre-tapped in metaphyseal bone is recommended because it produces greater holding power than self-tapped insertion.     

Comparison of insertion time and pullout strength between self-tapping and non-self-tapping AO 4.5-mm cortical bone screws in adult equine third metacarpal bone

OBJECTIVE: To compare screw insertion characteristics and pullout mechanical properties between self-tapping (ST) and non-self-tapping (NST) AO 4.5-mm cortical bone screws in adult equine third metacarpal bone (MC3). STUDY DESIGN: In vitro biomechanical experiment. ANIMALS OR SAMPLE POPULATION: Seven pairs of adult equine MC3. METHODS: Bicortical holes were drilled transversely in proximal metaphyseal, diaphyseal, and distal metaphyseal locations of paired MC3. NST screws were inserted in pre-tapped holes in 3 sites of one bone pair, and ST screws were inserted in non-tapped holes of contralateral MC3. Tapping and screw insertion times and maximum torques were measured. Screw pullout mechanical properties were determined. RESULTS: Screw insertion time was longer for ST screws. Total time for tapping and insertion (total insertion time) was over twice as long for NST screws. Statistically significant differences were not observed between screws for any pullout mechanical property. From pullout tests, diaphyseal locations had significantly stiffer and stronger structure than metaphyseal locations. Pullout failure more commonly occurred because of screw breakage than bone failure. Bone failure and bone comminution were more commonly associated with ST screws. Bone failure sites had pullout failure loads that were 90% of screw failure sites. CONCLUSIONS: NST and ST 4.5-mm-diameter cortical bone screws have similar pullout mechanical properties from adult equine MC3. ST screws require less than half the total insertion time of NST screws. CLINICAL RELEVANCE: Use of ST 4.5-mm-diameter cortical bone screws should be considered for repair of adult equine MC3 fractures; however, bone failures at screw sites should be monitored.     

A biomechanical comparison of headless tapered variable pitch and AO cortical bone screws for fixation of a simulated slab fracture in equine third carpal bones

OBJECTIVE: To compare the mechanical shear strengths and stiffnesses obtained from in vitro testing of a simulated complete third carpal bone (C3) frontal plane radial facet slab fracture (osteotomy) stabilized with either a 4/5 Acutrak (AT) compression screw or a 4.5-mm AO cortical bone (AO) screw inserted in lag fashion. Drilling, tapping, and screw insertion torques, forces, and times also were compared between AT and AO implants. STUDY DESIGN: In vitro biomechanical assessment of site preparation, screw insertion, and shear failure test variables of bone screw stabilized simulated C3 slab fracture in paired cadaveric equine carpi. SAMPLE POPULATION: Eight pairs of cadaveric equine C3 without orthopedic abnormalities. METHODS: Standardized simulated C3 slab fractures were repaired with either AO or AT screws (AO/C3 and AT/C3 groups, respectively). Drilling, tapping, and screw insertion torques, forces, and times were measured with a materials testing machine for each screw type. Repaired specimens were tested in axially oriented shear until failure. Paired Students t-tests were used to assess differences between site preparation, screw insertion, and shear testing variables. Significance was set at P <.05. RESULTS: There were no significant differences in bone fragment measurements of the standardized simulated C3 slab fractures created for AO or AT screws. There were no significant differences for mean and maximum drilling torques; however, the tapered AT drill had greater maximum drilling force compared with the 3.2-mm and 4.5-mm AO drill bits. Mean insertion torque and force measured from the self-tapping AT screw were not significantly different compared with the 4.5-mm AO tap. There were no significant differences in maximum screw torque among constructs. Total procedure time was significantly longer for the AT group (5.8 +/- 1.6 minutes) compared with the AO group (2.9 +/- 1.1 minutes; P =.001). AT stabilized specimens had significantly greater mean +/- SD initial shear stiffness (3.64 +/- 1.08 kN/mm) than AO specimens (1.64 +/- 0.73 kN/mm; P =.005). All other shear mechanical testing variables were not statistically different among screw types. CONCLUSION: The 4/5 Acutrak insertion technique was accurate and safe, and the AT screw effectively stabilized simulated equine C3 frontal plane slab fractures. When tested in shear, this screw type was mechanically comparable to the 4.5-mm AO screw; however, AT constructs had greater initial shear stiffness. Initial shear stiffness was likely an indirect measure of interfragmentary compression, and thus may indicate that the AT screw provides a more rigid fixation for frontal plane C3 slab fractures in horses. CLINICAL RELEVANCE: Considering the comparable mechanical behavior, greater initial shear stiffness for AT screw stabilized C3 slab fracture fragments, the ability to accurately insert the screw with the aid of a guide pin, and the potential for less persistent soft tissue irritation with the headless screw design, the 4/5 tapered AT screw is an attractive alternative for repair of C3 slab fractures in horses.     

A Biomechanical Comparison of Headless Tapered Variable Pitch and AO Cortical Bone Screws for Fixation of a Simulated Lateral Condylar Fracture in Equine Third Metacarpal Bones

OBJECTIVE: To compare drilling, tapping, and screw-insertion torque, force, and time for the 4.5-mm AO and 6.5-mm Acutrak Plus (AP) bone screws, and to compare the mechanical shear strength and stiffness of a simulated complete lateral condylar fracture of the equine third metacarpal bone (MC3) stabilized with either an AO or AP screw. STUDY DESIGN: In vitro biomechanical assessment of screw-insertion variables, and shear failure tests of a bone-screw-stabilized simulated lateral condylar fracture. SAMPLE POPULATION: Eight pairs of cadaveric equine MC3s METHODS: Metacarpi were placed in a fixture and centered on a biaxial load cell in a materials-testing system to measure torque, compressive force, and time for drilling, tapping, and screw insertion. Standardized simulated lateral condylar fractures were stabilized by either an AO or AP screw and tested in shear until failure. A paired t test was used to assess differences between screws, with significance set at P < .05. RESULTS: Insertion and mechanical shear testing variables were comparable for AO and AP insertion equipment and screws. CONCLUSION: The 6.5-mm tapered AP screw can be inserted in equine third metacarpal condyles and is mechanically comparable with the 4.5-mm AO screw for fixation of a simulated lateral condylar fracture. CLINICAL RELEVANCE: Considering the comparable mechanical behavior, the potential for less-persistent soft-tissue irritation with the headless design, and the ability to achieve interfragmentary compression by inserting the screw in one hole drilled perpendicular to the fracture plane, the 6.5-mm tapered AP screw may be an attractive alternative for repair of incomplete lateral condylar fractures in horses.     

Screw fixation in lag fashion of equine cadaveric metacarpal and metatarsal condylar bone specimens: a biomechanical comparison of shaft and cortex screws

OBJECTIVE: To compare acute fixation stability and insertion effort of cortex bone screws with and without a shaft inserted in lag fashion in equine metacarpal (metatarsal, MC(T)III) bone. METHODS: Screw types with independent variables of screw diameter (4.5 or 5.5 mm) and shaft type (without shaft, with 20-mm shaft, or with 25-mm shaft) were studied. Bone specimens cut from distal equine MC(T)III condyles were used. After screw insertion in lag fashion into 2 bone blocks with an instrumented device, shear tests were conducted in a mechanical testing machine. Outcome variables of peak insertion torque, insertion energy, stiffness. yield strength, and displacement at 3 kN of load were compared. RESULTS: The effects of screw design were substantial. Screws with shaft were 30% to 40% stiffer and 60% to 70% stronger than screws without shaft. Screws with shaft could tolerate 80 to 95 kg more force than screws without shaft before yielding. At 3 kN load, the displacement with screws with shaft was 55% to 60% of that with screws without shaft. Screws with a long shaft tended to perform better than those with a short shaft. There was no difference in the shear stiffness, shear yield strength, or shear displacement between the 2 screw diameters. Although larger diameter screws required more insertion effort, and screws with a short shaft required the most insertion energy, these differences were small. CONCLUSIONS: Cortex screws with a long shaft of 4.5- or 5.5-mm diameter provide better stability in equine MC(T)III condyle bone with less insertion effort compared with those with a short shaft or no shaft. CLINICAL SIGNIFICANCE: Cortex bone screws with a shaft inserted in lag fashion should be considered for the fixation of equine MC(T)III condylar fractures.     

Use of Computed Tomography in Standing Position to Identify Guidelines for Screw Insertion in the Distal Phalanx of Horses: An Ex Vivo Study

Objectives— To compare the precision of radiography and computed tomography (CT) preoperatively in the standing position for identification of guidelines for screw insertion in the distal phalanx, and to identify whether standing CT might improve operative time compared with preoperative radiographic planning.
Study Design— Experimental ex vivo study.
Animals— Cadaveric equine thoracic limb pairs (n=10).
Methods— Insertion of a 4.5 mm cortex screw in lag fashion into an intact distal phalanx was evaluated in 2 groups (n=10) of cadaveric equine thoracic limbs. In 1 group, the site, direction, and length of the implant were determined by radiography, and in the other group, by CT. Accuracy of screw placement was verified by specimen dissection. Outcomes were (1) absence of penetration of the articular surface, the solar surface, or the semilunar canal (2) appropriate length and direction of the screw. Surgical time was also measured.
Results— No screw penetrated the articular surface, the solar surface, or the semilunar canal in either group. CT was more accurate to identify guidelines for screw insertion (U=23.50, P =.049). With CT, surgical time (mean, 7.7 minutes) was significantly shorter (U=0.000, P =.000) than with radiography (mean, 12.7 minutes).
Conclusion— Standing CT can be used to accurately determine anatomic landmarks for screw insertion in lag fashion in sagittal fractures of the distal phalanx.
Clinical Relevance— This study has a clear clinical relevance for improved internal fixation of sagittal fractures of the distal phalanx.     

Increased sacral screw purchase minimizes screw loosening in canine triple pelvic osteotomy

OBJECTIVE: To determine if screw loosening in triple pelvic osteotomies (TPO) is minimized when screws cranial to the ilial osteotomy had maximal sacral purchase. STUDY DESIGN: Prospective study. ANIMALS: Forty-six dogs with decreased acetabular coverage of the femoral head and minimal degenerative joint changes. METHODS: TPOs were performed where screws cranial to the ilial osteotomy were inserted to maximally engage sacral bone. Data collected were: use of ilial and ischial cerclage wire, screw length, ventrodorsal radiographic sacral width (most caudal aspect), pelvic canal diameter, and sacral penetration of the 3 cranial screws. On all subsequent radiographs, changes in screw position, pelvic canal diameter, and sacral purchase were noted. RESULTS: For 69 TPOs, 414 screws were used. Mean radiographic cranial screw length was 34.54 mm. Combined sacral depth of all 3 screws was 93.3% of sacral width. All osteotomies healed uneventfully. Twenty-four screws (6%) loosened with 12 being in the most cranial positions. Use of ischial or ilial cerclage wires did not statistically influence screw loosening. Pelvic diameter decreased by a mean of 7.79% from postoperative radiographs to the last radiographic recheck. CONCLUSIONS: By sufficiently engaging the sacrum with screws cranial to the ilial osteotomy, implant failures can be avoided and screw loosening minimized when a 6-hole TPO plate is used. CLINICAL RELEVANCE: To minimize screw-loosening in TPO, screws inserted cranial to the ilial osteotomy should be inserted to maximum sacral depth without penetrating the vertebral canal.     

Early detection and treatment of screw loosening in triple pelvic osteotomy

OBJECTIVE: To detect early screw loosening in triple pelvic osteotomy (TPO) and to evaluate the efficacy of retightening using fluoroscopic guidance and minimally invasive surgery to maintain acetabular alignment and achieve bone healing. STUDY DESIGN: Prospective clinical study. SAMPLE POPULATION: Sixteen dogs that had TPO. METHODS: Dogs (16) had TPO (21) by using pre-angled plates secured with 3.5 and 4.0 mm screws, with ischiatic or iliac cerclage, for osteosynthesis. In all but 1 TPO at least 1 screw was inserted into the sacral body (43 screws). The mean radiographic screw length inserted in the sacrum was 10.2 mm, and the mean percent sacral engagement was 22%. Dogs were examined clinically and radiographically immediately postoperatively, and at 10, 30, 60, and 90 days to evaluate screw position. Loose screws were retightened through stab incisions using fluoroscopy to locate the screw. RESULTS: TPO was performed without operative complications. At 10 days, 12 TPOs (57%; 11 dogs) had loose screws primarily located in the cranial aspect of the plate. This represented 20% (25) of the inserted screws. In 5 dogs, screw loosening resulted in medial rotation of the acetabular segment. All loose screws were retightened; 3 screws loosened again in 2 dogs and were detected at 60 days. However, the osteotomies healed with the planned acetabular rotation without further intervention. Screw tightening corrected the acetabular segment displacement. Screws correctly seated at 10 days did not subsequently loosen. Clinical and radiographic outcome was judged excellent in all dogs. CONCLUSION: Loose screws in TPO plates can be identified by 10 days postoperatively and retightened using fluoroscopic guidance to achieve acetabular realignment and healing without need for further surgery. CLINICAL RELEVANCE: Postoperative radiographic evaluation of screw position at 10 days after TPO is recommended to detect loose screws. Retightening loose screws should be considered as an alternative to TPO revision or confinement, especially in immature dogs.     

In vitro evaluation of screws and suture anchors in metaphyseal bone of the canine tibia

OBJECTIVE: To compare ease of insertion, load to failure, and mode of failure of cortical and cancellous screws, BoneBiter, IMEX, and TwinFix suture anchors in canine metaphyseal tibial bone. STUDY DESIGN: Experimental biomechanical study. ANIMALS: Canine cadaveric tibias. METHODS: One investigator inserted all anchors and subjectively evaluated ease of placement. Anchor systems were loaded to failure along axis of insertion with audio-video recording to determine failure mode. RESULTS: BoneBiter was the most difficult anchor to insert successfully. Mean+/-SD loads to failure were cancellous screw (711+/-193 N), IMEX 4.7 mm 18 g wire (661+/-163 N), IMEX 4.0 mm 18 g wire (661+/-165 N), cortical screw (635+/-184 N), BoneBiter #5 Kevlar suture (393+/- 109 N), and TwinFix 5.0 mm #2 polyester (267+/-73 N). No significant differences were noted among the cortical screw, cancellous screw, IMEX 4.7 and 4.0 mm, all of which were significantly (P<.001) greater than BoneBiter and TwinFix . Failure modes were pullout of bone, suture-wire breakage, eyelet breakage, or no failure to 1000 N: screws (18,0,0,2), IMEX (18,1,1,0), BoneBiter (2,8,0,0), and TwinFix (0,10,0,0). CONCLUSIONS: Fixation devices were user friendly, with the exception of BoneBiter. Mode of failure is dependent on suture material and anchor design. Cortical and cancellous screws, and IMEX anchors with 18 g wire have significantly greater load to failure compared with BoneBiter and TwinFix suture anchors. CLINICAL RELEVANCE: Based on load to failure, ease of use, design characteristics, and cost, IMEX anchors may have advantages over other comparable soft tissue fixation devices.     

Canine sacroiliac luxation: anatomic study of dorsoventral articular surface angulation and safe corridor for placement of screws used for lag fixation

OBJECTIVE: To define a safe corridor in the dorsoventral plane to facilitate placement of screws inserted in lag fashion within the sacral body for fixation of sacroiliac fracture-luxation injuries in dogs. STUDY DESIGN: Anatomic study. SAMPLE POPULATION: Cadaveric canine sacra. METHODS: Canine sacra (n=45) were used for a radiographic study to define a safe corridor in the dorsoventral plane for placement of screws inserted in lag fashion for fixation of sacroiliac luxation in the dog. The defined safe corridor allowed drilling to a depth of 65% of the sacral width to ensure screw purchase of > or =60%. Effects of positioning and measurement techniques were evaluated. RESULTS: Eighty-seven safe corridors were measured. The mean articular surface was 100+/-4.52 degrees from horizontal. Mean maximum, optimum, and minimum safe corridor drill angles were 111+/- 4.57 degrees, 100+/-4.70 degrees, and 89+/-5.17 degrees, respectively, from the articular surface. Predicted surgeon error of +/-4 degrees was used to define the safe corridor for use clinically. CONCLUSIONS: In 91% of sacra, a drill angle of 100+/-4 degrees would remain ventral to the vertebral canal. Twelve sacra (14%) were at risk of penetration of the pelvic canal. A drill angle of 97+/-4 degrees avoids penetration of the vertebral canal in all sacra measured but risks ventral exit from the body in 30% of sacra studied. CLINICAL RELEVANCE: A drill angle of 97 degrees from the articular surface is recommended for insertion of screws for lag fixation of canine sacroiliac luxation.     

Effect of diameter of the drill hole on torque of screw insertion and pushout strength for headless tapered compression screws in simulated fractures of the lateral condyle of the equine third metacarpal bone

OBJECTIVE: To compare variables for screw insertion, pushout strength, and failure modes for a headless tapered compression screw inserted in standard and oversize holes in a simulated lateral condylar fracture model. SAMPLE POPULATION: 6 pairs of third metacarpal bones from horse cadavers. PROCEDURE: Simulated lateral condylar fractures were created, reduced, and stabilized with a headless tapered compression screw by use of a standard or oversize hole. Torque, work, and time for drilling, tapping, and screw insertion were measured during site preparation and screw implantation. Axial load and displacement were measured during screw pushout. Effects of drill hole size on variables for screw insertion and screw pushout were assessed by use of Wilcoxon tests. RESULTS: Drill time was 59% greater for oversize holes than for standard holes. Variables for tapping (mean maximum torque, total work, positive work, and time) were 42%, 70%, 73%, and 58% less, respectively, for oversize holes, compared with standard holes. Variables for screw pushout testing (mean yield load, failure load, failure displacement, and failure energy) were 40%, 40%, 47%, and 71% less, respectively, for oversize holes, compared with standard holes. Screws could not be completely inserted in 1 standard and 2 oversize holes. CONCLUSIONS AND CLINICAL RELEVANCE: Enlarging the diameter of the drill hole facilitated tapping but decreased overall holding strength of screws. Therefore, holes with a standard diameter are recommended for implantation of variable pitch screws whenever possible. During implantation, care should be taken to ensure that screw threads follow tapped bone threads.     

Computed tomography to identify preoperative guidelines for internal fixation of the distal sesamoid bone in horses: an in vitro study

Objective: To assess the reliability of computed tomography (CT) to identify the direction of implant insertion for cortical screws along the longitudinal axis of intact (nonfractured) distal sesamoid bones. Study Design: In vitro study. Sample Population: Cadaveric paired equine forelimbs (n=16). Methods: Insertion of a cortical screw in lag fashion along the longitudinal axis of intact (nonfractured) distal sesamoid bones was evaluated in 2 groups (3.5 and 4.5 mm) of 8 paired limbs. In each group, the direction of the distal sesamoid bone was determined by CT (Equine XTC 3000 pQCT scanner). Screw placement was verified by specimen dissection. Implant direction was considered satisfactory if the entire screw length was within the distal sesamoid bone and not damaging the articular or flexural surfaces. Results: In our sample and according to our criteria, the proportion of satisfactory direction of screws was 0.63 (5/8) for 4.5 mm implants, and 0.87 (7/8) for 3.5 mm implants. Conclusions: CT is a useful imaging modality to identify anatomic landmarks for insertion of a 3.5 mm cortical screw in the distal sesamoid bone.     

A biomechanical comparison of double-plate and Y-plate fixation for comminuted equine second phalangeal fractures

OBJECTIVES: To compare the biomechanical properties, in full limb preparations, of intact second phalanx and a simulated comminuted second phalangeal fracture stabilized with either two bone plates or a custom Y-plate. STUDY DESIGN: In vitro biomechanical assessment of intact limbs and of paired limbs with a simulated second phalangeal fracture stabilized by one of two fixation methods. Animal Population-Thirteen pairs of equine cadaveric forelimbs. METHODS: A comminuted second phalangeal fracture was created in six paired cadaveric limbs. For each limb pair, the fracture was stabilized with two plates in one limb, and with a Y-plate in the contralateral limb. These limbs and seven pairs of intact limbs were subjected to axial compression in a single cycle until failure. Mechanical properties were compared with a mixed-model ANOVA and post hoc contrasts. Joint contact pressure, screw insertion torque, and final screw torque remaining after mechanical testing were also evaluated for constructs. RESULTS: No significant differences in mechanical testing variables were detected between construct types. However, the Y-Plate construct had significantly greater yield load, yield displacement and yield energy, and failure load and stiffness values than those for intact specimens, whereas the double-plate construct only had greater stiffness than intact specimens. There were no significant differences in joint contact pressures for both constructs. The final screw torque for proximal phalangeal screws was significantly greater for the Y-plate constructs than for double-plate constructs. CONCLUSIONS: The Y-plate was as effective as the double-plate technique for stabilization of simulated comminuted second phalangeal fractures in monotonically tested equine cadaveric forelimbs. CLINICAL RELEVANCE: This investigation supports evaluation of the Y-plate for repair of comminuted second phalangeal fractures in equine patients. Its specific design may facilitate repair of second phalangeal fractures, and may provide increased stability by allowing the proximal fragments of the second phalanx to be fixed with three screws placed through the plate.     

Biomechanical comparison of orthofix pins and cortical bone screws in a canine humeral condylar fracture model

OBJECTIVE: To compare shear stability of simulated humeral lateral condylar fractures reduced with either a self-compressing pin or cortical bone screw. STUDY DESIGN: In vitro biomechanical tests. SAMPLE POPULATION: Bilateral cadaveric canine humeri (n=18) without evidence of elbow disease. METHODS: Lateral condylar fracture was simulated by standardized osteotomy. Bone fragments were stabilized with a self-compressing pin or a cortical bone screw (2.7 or 3.5 mm) inserted in lag fashion. Specimens were mounted in a materials testing system and the condylar fragment displaced in a proximal direction until failure. Mechanical testing variables derived from load-deformation curves were compared between stabilization methods using a Student's paired t-test. RESULTS: There were no statistically significant differences for mechanical testing variables between pin and screw stabilized specimens at expected walk and trot loads. Three yield points subjectively coincided with yield of the interfragmentary interface (Y1), bone at the implant interface (Y2), and implant deformation (Y3). Displacements at Y1 were 48-156% greater for pin than screw stabilized specimens. Y2 and Y3 loads were higher for screw than pin stabilized specimens, but likely supraphysiologic for dogs convalescing after surgical repair. CONCLUSIONS: A self-compressing pin or a cortical bone screw inserted in lag fashion both provided adequate strength in applied shear to sustain expected physiologic loads through the repaired canine elbow during postoperative convalescence. CLINICAL RELEVANCE: Because self-compressing pins were easy to implant and mechanical properties were not significantly different than cortical screws at expected physiologic loads, pins should be considered for the repair of traumatic humeral condylar fractures.     

A biomechanical comparison of equine third metacarpal condylar bone fragment compression and screw pushout strength between headless tapered variable pitch and AO cortical bone screws

OBJECTIVES: To compare bone fragment compression and the mechanical pushout strength and stiffness of 6.5-mm Acutrak Plus (AP) and 4.5-mm AO cortical (AO) bone screws after stabilization of a simulated equine third metacarpal (MC3) bone complete lateral condylar fracture. STUDY DESIGN: In vitro biomechanical paired study of screw insertion variables, bone fragment compression, and screw pushout tests using a bone screw stabilized simulated lateral condylar fracture model. SAMPLE POPULATION: Six pairs of cadaveric equine MC3s. METHODS: Metacarpi were placed in a fixture and centered on a biaxial load cell in a materials testing system to measure torque, compressive force, and time for drilling, tapping, and screw insertion. Fragment compression was measured with a pressure-sensing device placed between the simulated fracture fragments during screw insertion for fragment stabilization. Subsequently, screws were pushed out of the stabilized bone fragments in a single cycle to failure. A paired t test was used to assess differences between site preparation, screw insertion, fragment compression, and screw pushout variables, with significance set at P <.05. RESULTS: Measured drilling variables were comparable for AO and AP specimens. However, the AP tap had significantly greater insertion torque and force. Mean maximum screw insertion torque was significantly greater for AO screws. For fragment compression, AP screws generated 65% and 44% of the compressive pressure and force, respectively, of AO screws. AP screws tended to have higher overall pushout strength. Pushout stiffness was similar between both screw types. CONCLUSION: The 6.5-mm tapered AP screw generated less interfragmentary compressive pressure and force but had similar pushout stiffness. Evaluation of failure patterns demonstrated that AP screws had greater pushout strength compared with 4.5-mm AO screws for fixation of a simulated complete lateral condylar fracture. CLINICAL RELEVANCE: The 6.5-mm tapered AP screw should provide ample holding strength but would provide less interfragmentary compression than 4.5-mm AO screws for repair of complete lateral condylar fractures in horses.