Ferulic acid release and 4-vinylguaiacol formation during brewing and fermentation: indications for feruloyl esterase activity in Saccharomyces cerevisiae

The release of ferulic acid and the subsequent thermal or enzymatic decarboxylation to 4-vinylguaiacol are inherent to the beer production process. Phenolic, medicinal, or clove-like flavors originating from 4-vinylguaiacol frequently occur in beer made with wheat or wheat malt. To evaluate the release of ferulic acid and the transformation to 4-vinylguaiacol, beer was brewed with different proportions of barley malt, wheat, and wheat malt. Ferulic acid as well as 4-vinylguaiacol levels were determined by HPLC at several stages of the beer production process. During brewing, ferulic acid was released at the initial mashing phase, whereas moderate levels of 4-vinylguaiacol were formed by wort boiling. Higher levels of the phenolic flavor compound were produced during fermentations with brewery yeast strains of the Pof(+) phenotype. In beer made with barley malt, ferulic acid was mainly released during the brewing process. Conversely, 60-90% of ferulic acid in wheat or wheat malt beer was hydrolyzed during fermentation, causing higher 4-vinylguaiacol levels in these beers. As cereal enzymes are most likely inactivated during wort boiling, the additional release of ferulic acid during fermentation suggests the activity of feruloyl esterases produced by brewer's yeast.     

Liquid chromatographic assay of ascorbic acid, niacinamide, pyridoxine, thiamine, and riboflavin in multivitamin-mineral preparations

A simple and rapid method is presented for the liquid chromatographic assay of ascorbic acid, niacinamide, pyridoxine, thiamine, and riboflavin from a single chromatogram. Ion-pair chromatography with a reverse phase C18 cartridge in a radial compression system is used. Quantitation is excellent with a total analysis time of less than 20 min. A mobile phase of methanol-water (15 + 85) (0.005M heptanesulfonic acid) with 0.5% triethylamine at pH 3.6 and a flow rate of 2.0 mL/min gives the most satisfactory separation of the 5 water-soluble vitamins. By using 2 detectors in series set at different wavelengths and sensitivities, all 5 vitamins, with peak heights on scale, can be measured from a single injection; peak elution order is ascorbic acid, niacinamide, pyridoxine, thiamine, and riboflavin. Ascorbic acid is measured at 254 nm and the other vitamins, at 280 nm. The amount of amine modifier in the mobile phase is critical to the separation of niacinamide and pyridoxine. Recoveries of 5 water-soluble vitamins from spiked placebos were in the range of 98.2-102.0%. Confidence limits, +/- 3 SD, were in the range of 1.0-5.4%. Overall, the results obtained using the liquid chromatographic method show excellent agreement with manual methods and automated analysis.     

Liquid chromatographic determination of thiamine in infant formula products by using ultraviolet detection

A liquid chromatographic (LC) method has been developed for determination of thiamine in infant formula products. The method involves the following steps: (a) dissolution of the formula with water, (b) pH adjustment to induce protein precipitation, (c) filtration, (d) concentration of thiamine by using a cation exchange column and extraction system, (e) cleanup of adsorbed thiamine and other contaminants on the ion exchange column by washing with water and then methanol, (f) elution of thiamine with a mixture of methanol-2M potassium chloride buffer, (g) analysis for thiamine by liquid chromatography. Thiamine is separated from its phosphate esters, the mono-, di-, and triphosphates, as well as its antagonists oxythiamine and pyrithiamine on a 6 micron particle size column and a mobile phase of 40mM triethyl-ammonium phosphate buffer-methanol (pH 7.7) (90 + 10). The method is reproducible, with relative standard deviations ranging from +/- 0.76 to +/- 1.2%, depending on the infant formula product tested. Recovery of thiamine from various infant formula products is greater than 99%. Analysis for thiamine of several commercially available infant formulas at different levels of fortification gave results that ranged from 122 to 216% of the declared levels. These results agree well with those obtained using the AOAC fluorometric method.     

Simultaneous liquid chromatographic determination of water-soluble vitamins, caffeine, and preservative in oral liquid tonics

A rapid, simple, and reliable liquid chromatographic method has been developed for the simultaneous determination of nicotinamide (niacinamide), thiamine, riboflavin, riboflavin sodium phosphate, pyridoxine, caffeine, and sodium benzoate in commercial oral liquid tonics. The 7 components are separated on a reverse phase C18 column using a mobile phase of acetonitrile-0.01M potassium dihydrogen phosphate-triethylamine (8 + 91.5 + 0.5 v/v/v) containing 5mM sodium octanesulfonate and adjusted to pH 2.8 with phosphoric acid. Components are detected at 254 nm with attenuation 0.02 AUFS. Acetanilide is used as an internal standard. In addition to the 7 components mentioned, nicotinic acid (niacin), cyanocobalamin, and folic acid are also separated under the same conditions. Sample preparation involves only addition to internal standard solution and dilution with mobile phase and then filtration. Recoveries of the 7 components and cyanocobalamin from spiked preparations ranged from 97 to 104% with coefficients of variation of 0.9-4.2%.     

Effect of germination temperatures on proteolysis of the gluten-free grains sorghum and millet during malting and mashing

Our study showed that sorghum and millet followed a similar pattern of changes when they were malted under similar conditions. When the malt from these cereals was mashed, both cereal types produced wide spectra of substrates (sugars and amino acids) that are required for yeast fermentation when malted at either lower or higher temperatures. At the germination temperatures of 20, 25, and 30 °C used in malting both cereal types, production of reducing sugars and that of free amino nitrogen (FAN) were similar. This is an important quality attribute for both cereals because it implies that variation in temperature during the malting of sorghum and millet, especially when malting temperature is difficult to control, and also reflecting temperature variations, experienced in different countries, will not have an adverse effect on the production and release of amino acids and sugars required by yeast during fermentation. Such consistency in the availability of yeast food (substrates) for metabolism during fermentation when sorghum and millet are malted at various temperatures is likely to reduce processing issues when their malts are used for brewing. Although sorghum has gained wide application in the brewing industry, and has been used extensively in brewing gluten-free beer on industrial scale, this is not the case with millet. The work described here provides novel information regarding the potential of millet for brewing. When both cereals were malted, the results obtained for millet in this study followed patterns similar to those of sorghum. This suggests that millet, in terms of sugars and amino acids, can play a role similar to that of sorghum in the brewing industry. This further suggests that millet, like sorghum, would be a good raw material for brewing gluten-free beer. Inclusion of millet as a brewing raw material will increase the availability of suitable materials (raw material sustainability) for use in the production of gluten-free beer, beverages, and other products. The availability of wider range of raw materials will not only help to reduce costs of beer production, but by extension, the benefit of reduced cost of production can be gained by consumers of gluten-free beer as the product would be cheaper and more widely available.     

Simultaneous determination of thiamine and riboflavin in foods by liquid chromatography

Recent methods for determination of thiamine (thiochrome) and riboflavin by liquid chromatography (LC) are outlined and discussed, and a new method allowing the simultaneous determination of these 2 vitamins by using a single fluorescence detector is described. This system involves an ODS 5 micron ultrasphere column and a pH 7.5 mobile phase composed of 0.005M tetrabutyl ammonium phosphate in methanol-water (20 + 80).     

Chemometric studies of vinegars from different raw materials and processes of production

The phenolic composition, aroma compounds, and organic acid content of 83 vinegars have been determined. Multivariate analysis techniques have been used to classify these vinegar samples according to raw material (white wine, red wine, apple, honey, alcohol, balsamic, and malt) and production process (with and without aging in wood). Cluster analysis grouped the samples according to production process. Only apple and balsamic vinegars were separated from wine vinegars. Alcohol, honey, and malt vinegars were grouped with no aged wine vinegars. Linear discriminate analysis allowed a 88% differentiation according to raw material and 100% according to aging in wood. Besides, from the results obtained, a major role of the volatile compounds in the differentiation of the vinegar samples according to their aging period in wood can be seen.     

Determination of diclofenac sodium and related compounds in raw materials and formulations

A liquid chromatographic method has been developed for determination of drug and related compounds in diclofenac sodium raw material, slow-release, and enteric coated tablets. The method specifies a 5 microns octadecylsilane bonded phase column, a mobile phase of tetrahydrofuran-acetonitrile-buffer, pH 5 (1 + 4 + 8.3), and detection at 229 nm. The method resolves 10 known related compounds with limits of quantitation of 0.2% or less. Seventeen drug raw material samples were evaluated. Total impurity levels ranged from 0.1 to 0.9%. The method has also been used for determination of drug content in raw materials and formulations. Mean assay levels in drug raw materials ranged between 98.3% and 101.8%.     

Quantitative study of the formation of endoproteolytic activities during malting and their stabilities to kilning

The proteinases of germinating barley (Hordeum vulgare L.) hydrolyze storage proteins into amino acids and small peptides that can be used by the growing plant or, during brewing, by yeast. They are critical for the malting and brewing processes because several aspects of brewing are affected by the amounts of protein, peptide, and amino acids that are in the wort. This study was carried out to quantitatively measure when endoproteinases form in green malt and whether they are inactivated at the high temperatures that occur during malt kilning. Little endoproteolytic activity was present in ungerminated barley, but the activities began forming 1 day into the "germination" phase of malting, and they were nearly maximal by the third germination day. Quantitative studies with azogelatin "in solution" assays showed that the green malt endoproteolytic activities were not inactivated under commercial kilning conditions that use temperatures as high as 85 degrees C but that some actually increased during the final kilning step. Qualitative (2-D, IEF x PAGE) analyses, which allow the study of individual proteases, showed that some of the enzymes were affected by heating at 68 and 85 degrees C, during the final stages of kilning. These changes obviously did not, however, decrease the overall proteolytic activity.     

Fast and simple liquid chromatographic determination of nonphosphorylated thiamine in infant formula, milk, and other foods

A very fast and simple method for determination of nonphosphorylated thiamine in infant formula products, milk, and other nonfortified foods using reverse-phase ion-pairing liquid chromatography (LC) has been developed. Sample preparation consists of merely acid treatment to precipitate protein, followed by gravity filtration. No concentration, extraction, derivatization, or preliminary column cleanup is necessary. The chromatography is done on muBondapack C18 with an aqueous mobile phase containing 0.15% sodium hexane sulfonate, 20% MeOH, 1.5% HOAc, and 0.1% EDTA at a flow rate of 2.5 mL/min. Ultraviolet detection at 248 nm is used. A typical run takes 7 min, and 60 samples can be processed in 4 h. Results average from 96 to 104% of theory for the infant formula products analyzed. A 99 to 103% recovery of spike has been demonstrated. Method precision is good (2 to 4% RSD, short-term, and 2 to 5% RSD, long-term, depending on sample type). Peak separation from thiamine phosphate esters is achieved. Specificity is demonstrated by UV spectral scan and absorbance ratios. Equivalency to a microbial method (validated against the official AOAC fluorometric method) was established. The method is used for high-volume quality control testing of milk-based infant formula products in the ready-to-use, concentrate, or powder form.     

Multiresidue determination of pesticides in malt beverages by capillary gas chromatography with mass spectrometry and selected ion monitoring

A method was developed to determine pesticides in malt beverages using solid phase extraction on a polymeric cartridge and sample cleanup with a MgSO4-topped aminopropyl cartridge, followed by capillary gas chromatography with electron impact mass spectrometry in the selected ion monitoring mode [GC-MS(SIM)]. Three GC injections were required to analyze and identify organophosphate, organohalogen, and organonitrogen pesticides. The pesticides were identified by the retention times of peaks of the target ion and qualifier-to-target ion ratios. GC detection limits for most of the pesticides were 5-10 ng/mL, and linearity was determined from 50 to 5000 ng/mL. Fortification studies were performed at 10 ng/mL for three malt beverages that differ in properties such as alcohol content, solids, and appearance. The recoveries from the three malt beverages were greater than 70% for 85 of the 142 pesticides (including isomers) studied. The data showed that the different malt beverage matrixes had no significant effect on the recoveries. This method was then applied to the screening and analysis of malt beverages for pesticides, resulting in the detection of the insectide carbaryl and the fungicide dimethomorph in real samples. The study indicates that pesticide levels in malt beverages are significantly lower than the tolerance levels set by the United States Environmental Protection Agency for malt beverage starting ingredients. The use of the extraction/cleanup procedure and analysis by GC-MS(SIM) proved effective in screening malt beverages for a wide variety of pesticides.     

Novel prediction method of beer foam stability using protein Z, barley dimeric alpha-amylase inhibitor-1 (BDAI-1) and yeast thioredoxin

Foam stability is an important quality trait of beer. Our previous results of two-dimensional gel electrophoresis (2DE) analyses of beer proteins implied a relationship between barley dimeric alpha-amylase inhibitor-1 (BDAI-1) and beer foam stability as judged by the NIBEM-T analyzer. To develop a novel prediction method of beer foam stability under different conditions of barley cultivar and malt modification, multiple linear regression analysis was applied. The spot intensities of major beer proteins on 2DE gel were quantified and used as explanatory variables. The foam stabilities of 25 beer samples each brewed from malt with different malt modification in one of the three cultivars (cultivars A, B, and C) were explained by the spot intensities of BDAI-1 at the 5% significance level ( r = 0.421). Furthermore, two other major protein spots (b0 and b5) were observed on the 2DE gels of Japanese commercial beer samples with different foam stability. Then, multiple regression for foam stability was calculated using these three spot intensities as explanatory variables. As a result, 72.1% of the beer foam stability in 25 beer samples was explained by a novel multiple regression equation calculated using spot b0 and BDAI-1 as positive explanatory variables and spot b5 as a negative variable. To verify the validity of the multiple regression equation and the explanatory variables, the beer foam stability in practical beer samples was analyzed. As a result, 81.5% of the beer foam stability in 10 Japanese commercial beer samples was also explained by using spot b0 and BDAI-1 as positive explanatory variables and spot b5 as a negative variable. Mass spectrometry analyses followed by database searches revealed that protein spots b0 and b5 were identified as protein Z originated from barley and thioredoxin originated from yeast, respectively. These results confirm that BDAI-1 and protein Z are foam-positive factors and identify yeast thioredoxin as a possible novel foam-negative factor.     

Effect of modification of the kilning regimen on levels of free ferulic acid and antioxidant activity in malt

Barley phenolic antioxidants change in response to the kilning regimen used to prepare malt. Green malt was kilned using four different regimens. There were no major differences among the finished malts in parameters routinely used by the malting industry, including, moisture, color, and diastatic activity. Ferulic acid esterase activity and free ferulic acid were higher in malts subjected to the coolest kilning regimen, but malt ethyl acetate extracts (containing ferulic acid) contributed only ～5% of the total malt antioxidant activity. Finished malt from the hottest kilning regimen possessed the highest antioxidant activity, attributed to higher levels of Maillard reaction products. Modifying kilning conditions leads to changes in release of bound ferulic acid and antioxidant activity with potential beneficial effects on flavor stability in malt and beer.     

Lactobacillus plantarum and Pediococcus pentosaceus starter cultures as a tool for microflora management in malting and for enhancement of malt processability

Lactobacillus plantarum VTT E-78076 (E76) and Pediococcus pentosaceus VTT E-90390 (E390) starter cultures were added to the steeping water of normal malting barley in order to balance the microbial community and to enhance malt processability. In this study, we also investigated the effects of lactic acid-acidified MRS-spent medium (MRS-LA) on malting performance. Malting trials with five different two-row barley varieties were carried out in 25 kg pilot scale. The starter cultures promoted yeast growth during malting and restricted the growth of harmful bacteria and Fusarium fungi. Furthermore, they had positive effects on malt characteristics. Reduction in wort viscosity and beta-glucan content and enhanced xylanase and microbial beta-glucanase activities were observed. Starter cultures notably improved lautering performance. Some of the beneficial effects were due to the lactic acid and low pH, as similar effects were obtained with MRS-LA. Starter cultures offer a tool for tailoring of malt properties.     

以沼渣为原料固态发酵生产Bt生物农药

沼渣是沼气工程中产生的副产物,由于其富含营养物质及微量元素,而广泛应用于农业,畜牧业,养殖业等方面。Bt生物农药是一类具有选择性和高效性的杀虫剂,但是由于其原料的成本较高从而限制了生物农药的发展,而沼渣中富含微生物所需要的各种养分并且价格低廉,因此该文以生产沼气后的沼渣为资源,运用固态发酵,探索了利用沼渣制备苏云金杆菌生物农药的可行性。首先对沼渣营养成分进行了分析,分析表明其营养物质丰富,适合苏云金芽孢杆菌的生长与增殖。其次对菌种的沼渣培养基进行了优化,优化后的培养基质量分数为：50%的沼渣添加35%啤酒糟,10%玉米粉,5%豆饼粉,并与常规培养基和单纯沼渣的发酵进程进行了对比。在优化培养基条件下,发酵48 h后,芽孢数达到5.23×1010 CFU/g,毒力效价为16 100 IU/mg。在传统培养基中芽孢数2.55×1010 CFU/g,毒力效价12 500 IU/mg,而在单纯沼渣中Bt产量及毒性为1.74×108 CFU/g,6000 IU/mg。采用沼渣发酵制备Bt生物农药与传统培养基比较,降低了36.3%的生产成本,且发酵性能优良,也为沼渣的利用寻找到崭新的途径。     

In vitro potential antioxidant activity of (1-->3),(1-->6)-beta-D-glucan and protein fractions from Saccharomyces cerevisiae cell walls

(1-->3),(1-->6)-Beta-D-Glucan, a cell wall polysaccharide in many microorganisms, fungi and algae, is a well-known biological response modifier. Recently, it was found that (1-->3)-beta-D-glucan from Saccharomyces cerevisiae also exhibits antioxidative capabilities. In this study the antioxidative activity of the cell wall fractions of brewer's yeast was investigated. Particular emphasis was put on the question to which extent glucan is responsible for the antioxidative activity of the cell walls and how the other cell wall components might contribute. For the experiments yeast cell walls from brewery fermentations were used. Glucan was isolated by a three-step extraction procedure including a combination of hot water and enzymatic treatment. The level of (1-->3),(1-->6)-beta-D-glucan in the cell walls was analyzed enzymatically. The antioxidant activity was determined by electron paramagnetic resonance spectrometry and Trolox equivalent antioxidant capacity assay. The results show that the antioxidative activity of yeast cell wall proteins exceeds that of beta-glucan greatly. Especially aromatic side chains and free thiols from denatured proteins seem to work as antioxidants.     

Application of electron spin resonance spectroscopy and spin probes to investigate the effect of ingredients on changes in wheat dough during heating

The change in microviscosity of the aqueous and lipid phases of wheat flour dough, during heating and subsequent cooling, has been measured using novel spin probes based on the isoindolin-yloxyl structure. The spin probes, water and/or lipid soluble, were used with combinations of dough ingredients: diacetyl tartaric acid ester of monoglycerides (DATEM), salt, yeast, and sodium ascorbate. The lipid soluble probe showed that DATEM does not produce a homogeneous phase with endogenous lipids but is found in a separate, less mobile phase. Also, the lipids were shown not to be involved in the baking process, although DATEM may be incorporated into the gelled starch matrix. The water soluble probe enabled starch gelatinization to be investigated in detail and showed that gelatinization produces a reduction of dielectric constant. The technique is appropriate for the detailed examination of the behavior of different ingredients during baking and also potentially to examine interactions between ingredients and flour components in dough.     

N+离子注入法选育高产葡萄糖耐量因子（GTF）酵母菌株

本研究通过铬耐量筛选的方式,从12株供试啤酒酵母中获得一株高耐铬性啤酒酵母菌株,并对该菌株进行N+注入诱变,注入能量为50keV,注入剂量1×2.6×1013、2×2.6×1013、3×2.6×1013、4×2.6×1013、5×2.6×1013和6×2.6×1013 icon/cm2。结果表明,最适诱变的注入剂量为4×2.6×1013 icon/cm2,得到1株高产GTF的啤酒酵母菌株M11-1A11,其富铬能力较诱变前提高了22.4%。经5次传代发酵培养,突变株的富铬性能稳定。     

Fibrillar microfilaments associated with a high-amylose rice, goami 2, a mutant of ilpumbyeo, a high-quality japonica rice

The ultrastructure of cooked and malt-treated cooked rice of Ilpumbyeo (IP) and its mutant Goami 2 (G2), which have extreme contrasts in physicochemical properties, cooking quality, and ultrastructural characteristics in raw grains (1, 2), was compared. In cooked rice of IP, starch granules in endosperm cells were evenly coalesced, appearing as homogeneously smooth sheetlike matrix and/or globules, whereas those in G2 were a heterogeneously coarse matrix in which a novel structural feature, the microfilaments, was embedded. In malt-treated cooked rice of IP, most starch was hydrolyzed by the malt enzymes, appearing as empty vacuoles surrounded by the cell wall, whereas that in G2 was highly resistant to malt treatment, remaining as distinct structural features, the malt-resistant compound starch granules. The property of G2's compound starch granules, which are tolerant of mechanical and chemical treatments thereby retaining their structural integrity (2) and of cooking and malt treatment thereby retaining their physical hardness, appears to play a major role in determining the quality of cooked rice of G2.     

Determination of maltitol, isomaltitol, and lactitol by high-pH anion-exchange chromatography with pulsed amperometric detection

Disaccharide alditols (DAs) such as maltitol, isomaltitol, and lactitol are increasingly being employed in food industry by virtue of their low hydroscopicity, high stability, and good bulking properties. Still, these compounds are reduced-calorie sweeteners, so they are successfully employed in many dietetic foods, like candies, chocolates, baked products, ice creams, and beverages. Here we describe the determination of maltitol, isomaltitol, and lactitol, along with other common carbohydrates, in some foodstuffs such as toffees, biscuits, creams, sponge cakes, chocolates, roasted malt, and chicory leaves. Separations were accomplished by high-pH anion-exchange chromatography (HPAEC) with pulsed amperometric detection using 40 mM NaOH + 1 mM Ba(CH(3)COO)(2) as the mobile phase. The optimal detection potential (E(DET) = +0.10 V) was established in voltammetric experiments carried out in batch and flowing stream solutions. Under optimized conditions there was no need for both postcolumn addition of strong bases to the eluent and, even more important, column regeneration between runs. A pellicular column with a relatively low ion-exchange capacity was adopted, which allows a rapid separation of sorbitol, isomaltitol, lactitol, maltitol, glucose, fructose, sucrose, and lactose. The presence in the alkaline mobile phase of barium ions improved selectivity and reproducibility besides shorter analysis times as well. Limits of detection were on the order of 10-20 pmol injected. The contents of DAs and other free sugars in some dietetic foods were evaluated by calibration graphs.