Dyeing properties of bi-functional reactive dyes on a novel regenerated cellulosic fiber

Three bi-functional reactive dyes such as Bis(vinylsulphone) type, Bis(monochlorotriazine) type and Bis(mononicotinotriazine) type were applied to regular viscose rayon and new regenerated cellulosic fiber (enVix®) which was prepared from cellulose acetate fiber by the hydrolysis of acetyl groups, and their dyeing properties and fastness properties were compared.enVix exhibited better dyeability and fastness than regular viscose rayon and these results were also explained by the differences in the supramolecular structure of these two fibers.     

Preparation and characterization of electrospun polyvinyl alcoholstyrylpyridinium/<Emphasis Type="Italic">β</Emphasis>-cyclodextrin composite nanofibers: Release behavior and potential use for wound dressing

Biocompatible polyvinyl alcohol (PVA)-styrylpyridinium (SbQ)/β-cyclodextrin (β-CD) composite nanofibers were obtained by electrospinning in this study. PVA-SbQ was used as the foundation polymer as well as crosslinking agent, β-CD was incorporated to achieve expected properties such as improved mechanical properties and thermal stability. The Fourier transform infrared spectroscopy (FTIR) spectra confirmed the existence of β-CD, and the morphologies and average fiber diameters of the electrospun composite nanofibers were also analyzed by SEM. X-ray diffraction patterns (XRD) of PVA-SbQ/β-CD composite nanofibers revealed that the inclusion of β-CD in the nanofibers affected the ordered phase of PVA. Besides, the thermal analyses revealed the improvement in the thermal properties for PVA-SbQ/β-CD composite nanofibers. It was found that the crosslinked composite nanofibers showed a clear higher tensile strength (TS) as well as a greater elongation at break (EB). Eventually, antifungal drug griseofulvin (GSV) has been loaded into the composite nanofibers by formation of its inclusion complex with β-CD in aqueous solution, ultraviolet light (UV-Vis) spectral analysis showed that the drug-loading nanofibers had certain sustained release effect.     

Application of MCT-βCD to Modify Cellulose/Wool Blended Fabrics for Upgrading Their Reactive Printability and Antibacterial Functionality

Pre-loading of monochlorotriazinyl β-Cyclodextrin (MCT-βCD) onto/within viscose/wool (V/W) and cotton/wool (C/W) blended fabrics provide hosting cavities that can form host-guest inclusion complexes with reactive dyes in postprinting as well as with triclosan derivative or silver nanoparticles/hyperbranched polyamide-amine (AgNPs/HBPAA) composite in subsequent final antibacterial finishing step. Coloration properties, antibacterial activity against (S. aureus) and (E. coli) pathogenic bacteria, durability of the obtained products, according to the above mentioned route, to wash, surface morphology and composition of selected samples were investigated. Results obtained signify that premodification of the nominated substrates with MCT-βCD (10 g/l), followed by reactive printing with mono-or bifunctional reactive dye (20 g/l), and subsequent post-finishing with triclosan derivative or AgNPs/HBPAA composite (15 g/l each) is an efficient treatments sequence for attaining reactive prints with significant antibacterial efficacy and noticeable durability to wash. Surface depositions of selected active ingredients were also confirmed using SEM and EDX analysis.     

Antibacterial Coating of Glass Fiber Filters with Silver Nanoparticles (AgNPs) and Glycidyltrimethylammonium Chloride (GTAC)

Silver nanoparticles (AgNPs) were attached to glass fiber filters to improve their antibacterial properties using glycidyltrimethylammonium chloride (GTAC), a type of quaternary ammonium salt. The glass fiber filters treated with GTAC were placed into the Ag colloid and heat-treated at 43 °C for 90 min to attach AgNPs to the glass fiber filters. The glass fiber filters with the attached AgNPs were then analyzed by scanning electron microscopy and atomic force microscopy (AFM). The surface morphology of the glass fiber filters treated with GTAC and AgNPs was observed. The Ag atomic % of the glass fiber filters was analyzed according to the GTAC concentration, Ag colloid concentration, and AgNPs treatment temperature. The surface roughness of the glass fiber filters with the attached AgNPs was measured by AFM. The antibacterial tests of the GTAC and AgNP-treated glass fiber filters highlighted the sufficient antibacterial effects against E. coli, S. aureus, and P. aeruginosa. In particular, the antibacterial properties of glass fiber filters against S. aureus and P. aeruginosa were improved when the glass fiber filters were treated with both GTAC and AgNPs.     

One Step Thermochromic Pigment Printing and Ag NPs Antibacterial Functional Finishing of Cotton and Cotton/PET Fabrics

One step thermochromic pigment printing and antibacterial functionality of cotton (100 %) and cotton/polyester blend (50/50 %) were demonstrated in this study. The improvement in antimicrobial activity against G+ve (Bacillus cereus) and G-ve (E. coli), and pigment printability were achieved by inclusion of Ag-NPs (30 g/kg) into pigment printing paste followed by printing and microwave curing at 700 W for 5 min. Modes of interactions were proposed, and surface modification was also confirmed by SEM and EDX analysis that proved the presence of Ag-NPs in cotton and cotton/ polyester blended samples. The results indicated that the colour fastness to wash and rubbing was excellent, the surface roughness reduced, and exhibited good antibacterial activity against Bacillus cereus and E. coli bacteria.     

Physico-chemical characteristics of a seed fiber arised from <Emphasis Type="Italic">Pergularia Tomentosa</Emphasis> L.

In the present paper, we analyze a seed fiber arising from Pergularia tomentosa L. (PTL). It was, primarily, characterized using different techniques. The morphology of the fibers was observed via Scanning Electron Microscopy (SEM). They are also checked in term of decomposition behavior through TGA/DTG instrument. The cristallinity index was determined using XRD and it was about 52 %. The chemical composition in terms of moisture percent, ash, waxes and fats, lignin, hemicellulose and cellulose were, respectively 8.5 %, 2.74 %, 1.88 %, 8.6 %, 16 % and 43.8 %. The contact angle value was measured and the evolution of drop profile was captured with video-camera using GBX Tensiometer Surfaces Sciences Studies. Further, fibers were dyed with Methylene Blue, Direct Red 79, Sumifix supra yellow 3RF and Reactive Blue 198. Color coordinates (ΔL*, Δa*, Δb*, ΔC* and ΔH*) of the samples were so measured. All obtained data were compared to cotton fibers and some other cellulosic fibers. The Results revealed that, based on such properties, PTLF could be a competitive fiber in many applications field (textile weaving, composites, etc).     

Characterization of the surface properties of cellulosic fibers in fibrous and ground forms by IGC and contact angle measurements

Surface properties of fibrous and ground cotton and linen were investigated by inverse gas chromatography (IGC) and the contact angle with different liquids was also measured on fabrics composed of both fibers. Results proved that dispersion component of surface tension (γ _s ^d ) determined by IGC depends not only on the surface energy, but also on several factors influencing the adsorbability of probe molecules on the cellulosic substrates. For cotton samples, the trapping of n-alkanes among waxy molecules in the outer layer of fibers can be presumed. This effect results in larger γ _s ^d for cotton fibers than for linen in spite of the higher wettability of the linen fabrics. Besides the surface energy and trapping effects, the grinding also influences the γ _s ^d values. Specific enthalpy of adsorption (ΔH _A ^ab ) of polar probes could be determined on all linen samples, but only on the ground cotton sample. Lewis acid-base character calculated for linen and ground cotton samples depends on the same effects as the γ _s ^d does. The similar ΔH _A ^ab values of chloroform (acidic) and THF (basic) measured on each of the samples support the conclusion that the surface character is amphoteric, which is also proved by the high ΔH _A ^ab values of the amphoteric ethyl acetate and acetone probes.     

Species-specific interference exerted by the shrub <Emphasis Type="Italic">Cistus clusii</Emphasis> Dunal in a semi-arid Mediterranean gypsum plant community

Background

The gypsovag shrub Cistus clusii is locally dominant in semi-arid gypsum plant communities of North-Eastern Spain. This species commonly grows in species-poor patches even though it has nurse potential, suggesting interference on neighbouring species. Other Cistus species exert a chemically mediated interference on plant communities, suggesting that it might be a common phenomenon in this genus. This study aimed investigating whether C. clusii exerts chemically mediated interference on neighbouring species in gypsum plant communities. We tested in a greenhouse whether aqueous extracts from C. clusii leaves (L), roots (R) and a mixture of both (RL) affected germination, seedling survival, and growth of nine native species of gypsum communities, including C. clusii itself. We further assessed in the field richness and abundance of plants under the canopy of C. clusii compared to Gypsophila struthium (shrub with a similar architecture having a nurse role) and in open patches. Finally, we specifically assessed in the field the influence of C. clusii on the presence of the species tested in the greenhouse experiment.

Results

Aqueous extracts from C. clusii (R and RL) negatively affected either germination or survival in four of nine species. In the field, richness and abundance of plants were lower under the canopy of C. clusii than under G. struthium, but higher than in open patches. Specifically, five of nine species were less frequent than expected under the canopy of C. clusii.

Conclusions

Cistus clusii shows species-specific interference with neighbouring species in the community, which may be at least partially attributable to its phytotoxic activity. To our knowledge, this is the first report of species-specific interference by C. clusii.

     

Investigation on the Biodegradability and Antibacterial Properties of Nanohybrid Suture Based on Silver Incorporated PGA-PLGA Nanofibers

Polyglycolic acid-poly lactic glycolic acid (PGA-PLGA) electrospun nanofibers containing silver nanoparticles have been produced and twisted into the nanofibrous yarn. The morphology of nanofibers and produced yarns, as well as the mechanical properties of the yarns, were investigated. Furthermore, in vitro antibacterial properties and in vitro degradation behavior of yarns containing various silver nanoparticles were studied. SEM images confirmed that the addition of the silver nanoparticles into the polymer solution increases the fiber diameters. The result of the mechanical test of the yarns alone and used in two different forms of the knots was measured and results showed that the strength of the yarns without the knot was significantly more than that of others. The biodegradability test showed that the mechanical properties and the weight of the yarns were quickly reduced after subjecting to in vitro condition. The result of the antibacterial test indicated that the nanofiber yarns containing %3 silver nanoparticles were the most appropriate sample with a considerably antibacterial activity against both gram-positive bacterium Staphylococcus aureus and gram-negative bacterium Escherichia Coli with inhibition zones of 8.1 and 9.5 mm, respectively; which demonstrated that silver nanoparticles retained their effectiveness after the electrospinning process. Therefore the nanofibrous yarns containing silver nanoparticles could be successfully produced by the electrospinning process with the proper antibacterial property as a candidate for the surgical sutures.     

Nutritional Value of Commercial Protein-Rich Plant Products

The goal of this work was to analyze nutritional value of various minimally processed commercial products of plant protein sources such as faba bean (Vicia faba), lupin (Lupinus angustifolius), rapeseed press cake (Brassica rapa/napus subsp. Oleifera), flaxseed (Linum usitatissimum), oil hemp seed (Cannabis sativa), buckwheat (Fagopyrum esculentum), and quinoa (Chenopodium quinoa). Basic composition and various nutritional components like amino acids, sugars, minerals, and dietary fiber were determined. Nearly all the samples studied could be considered as good sources of essential amino acids, minerals and dietary fiber. The highest content of crude protein (over 30 g/100 g DW) was found in faba bean, blue lupin and rapeseed press cake. The total amount of essential amino acids (EAA) ranged from 25.8 g/16 g N in oil hemp hulls to 41.5 g/16 g N in pearled quinoa. All the samples studied have a nutritionally favorable composition with significant health benefit potential. Processing (dehulling or pearling) affected greatly to the contents of analyzed nutrients.     

Synthesis and spectral characterization of novel azomethine disperse dyes derived from pyrazolone moiety and their dyeing performance on polyester fabrics

A series of new azomethine dyes based on pyrazolone system have been synthesized via different routes. The solvatochromism for the dyes was evaluated with respect to spectroscopic properties in various solvents. The dyes were applied as disperse dyes on polyester fabrics and gave shade poor to excellent light fastness, washing, perspiration, sublimation, and rubbing fastness properties. Also the position of color in CIELAB coordinates (L*, a*, b*) and K/S value were investigated.     

Genome-wide association study and candidate gene analysis of rice cadmium accumulation in grain in a diverse rice collection

Background

Cadmium (Cd) accumulation in rice followed by transfer to the food chain causes severe health problems in humans. Breeding of low Cd accumulation varieties is one of the most economical ways to solve the problem. However, information on the identity of rice germplasm with low Cd accumulation is limited, particularly in indica, and the genetic basis of Cd accumulation in rice is not well understood.

Results

Screening of 312 diverse rice accessions revealed that the grain Cd concentrations of these rice accessions ranged from 0.12 to 1.23?mg/kg, with 24 accessions less than 0.20?mg/kg. Three of the 24 accessions belong to indica. Japonica accumulated significantly less Cd than indica (p < 0.001), while tropical japonica accumulated significantly less Cd than temperate japonica (p < 0.01). GWAS in all accessions identified 14 QTLs for Cd accumulation, with 7 identified in indica and 7 identified in japonica subpopulations. No common QTL was identified between indica and japonica. The previously identified genes (OsHMA3, OsNRAMP1, and OsNRAMP5) from japonica were colocalized with QTLs identified in japonica instead of indica. Expression analysis of OsNRAMP2, the candidate gene of the novel QTL (qCd3–2) identified in the present study, demonstrated that OsNRAMP2 was mainly induced in the shoots of high Cd accumulation accessions after Cd treatment. Four amino acid differences were found in the open reading frame of OsNRAMP2 between high and low Cd accumulation accessions. The allele from low Cd accumulation accessions significantly increased the Cd sensitivity and accumulation in yeast. Subcellular localization analysis demonstrated OsNRAMP2 expressed in the tonoplast of rice protoplast.

Conclusion

The results suggest that grain Cd concentrations are significantly different among subgroups, with Cd concentrations decreasing from indica to temperate japonica to tropical japonica. However, considerable variations exist within subgroups. The fact that no common QTL was identified between indica and japonica implies that there is a different genetic basis for determining Cd accumulation between indica and japonica, or that some QTLs for Cd accumulation in rice are subspecies-specific. Through further integrated analysis, it is speculated that OsNRAMP2 could be a novel functional gene associated with Cd accumulation in rice.

     

Bioactive and multifunctional textile using plant-based madder dye: Characterization of UV protection ability and antibacterial activity

In the present work the natural madder dye (Rubia tinctorum L.) was applied to the simultaneous dyeing and functionalization of polyester (PET) fabric. In the first part of the study the color performance and the durability were revealed for exhaustion dyed fabric. The dyed fabric was then characterized with respect to ultraviolet (UV) protection ability and antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). CIELab color coordinates, namely the positive a* and b* values, confirmed a yellow/orange color of the dyed fabric. From durability tests, the color showed a moderate to good light fastness and good to excellent fastness to washing and rubbing. The madder dye improved both the UV protective performance and the antibacterial activity of the fabric. With 3 % on weight of fiber (owf) the UV protection factor increased up to 106, and the antibacterial activity up to 86 % against both types of bacteria tested.     

Root cone angle is enlarged in <Emphasis Type="Italic">docs1</Emphasis> LRR-RLK mutants in rice

Background

The DEFECTIVE IN OUTER CELL LAYER SPECIFICATION 1 (DOCS1) gene belongs to the Leucine-Rich Repeat Receptor-Like Kinase (LRR-RLK) subfamily. It has been discovered few years ago in Oryza sativa (rice) in a screen to isolate mutants with defects in sensitivity to aluminum. The c68 (docs1–1) mutant possessed a nonsense mutation in the C-terminal part of the DOCS1 kinase domain.

Findings

We have generated a new loss-of-function mutation in the DOCS1 gene (docs1–2) using the CRISPR-Cas9 technology. This new loss-of-function mutant and docs1–1 present similar phenotypes suggesting the original docs1–1 was a null allele. Besides the aluminum sensitivity phenotype, both docs1 mutants shared also several root phenotypes described previously: less root hairs and mixed identities of the outer cell layers. Moreover, our new results suggest that DOCS1 could also play a role in root cap development. We hypothesized these docs1 root phenotypes may affect gravity responses. As expected, in seedlings, the early gravitropic response was delayed. Furthermore, at adult stage, the root gravitropic set angle of docs1 mutants was also affected since docs1 mutant plants displayed larger root cone angles.

Conclusions

All these observations add new insights into the DOCS1 gene function in gravitropic responses at several stages of plant development.

     

Effects of Blackcurrant and Dietary Fibers on Large Intestinal Health Biomarkers in Rats

This study examined the effects of anthocyanin-rich blackcurrant extract and dietary fibers individually and their combinations on biomarkers of large intestinal health in rats. After six weeks of feeding, rats fed diets with blackcurrant gained significantly less body weight and reduced their food intake resulting in a lower food efficiency compared with those rats fed control diets. Combining dietary fiber (apple or broccoli) with blackcurrant in the diet was more effective in reducing the body weight gain and food intake. Cecal bacterial populations and short-chain fatty acids differed between the experimental diets. Blackcurrants significantly altered the bacterial populations by increasing the abundance of Bacteroides-Prevotella-Porphyromonas group and Lactobacillus spp., while decreasing the abundance of Bifidobacterium spp. and Clostridium perfringens. Propionic acid concentrations were increased by the diets with blackcurrant. Butyric acid concentrations were increased by dietary fiber supplementation. Dietary fiber increased the number of goblet cells in the colon. Diets with blackcurrant were more effective in altering the biomarkers of large intestinal health than those without blackcurrant.     

Chloropicrin Soil Fumigation Reduces <Emphasis Type="Italic">Spongospora subterranea</Emphasis> Soil Inoculum Levels but Does Not Control Powdery Scab Disease on Roots and Tubers of Potato

The effect of chloropicrin fumigation on the soil populations of Spongospora subterranea and the development of powdery scab, formation of root galls and tuber yield was investigated in seven field trials conducted in Minnesota and North Dakota. Sixteen potato cultivars, with different levels of susceptibility to disease on roots and tubers, were planted in plots treated with chloropicrin at rates ranging from zero to 201.8 kg a.i. ha^?1. The amount of S. subterranea DNA in soil was determined using qPCR. Bioassays were conducted to further assess the effect of chloropicrin fumigation on root colonization by S. subterranea in two potato cultivars with contrasting disease susceptibility. In the field, chloropicrin applied at rates between 70.1 to 201.8 kg a.i. ha^?1 significantly decreased S. subterranea initial inoculum in soil but increased the amount of disease observed on roots and tubers of susceptible cultivars. The effect of increasing disease was confirmed in controlled conditions experiments. Although the amount of S. subterranea DNA in roots of bioassay plants increased with increasing chloropicrin rates, it remained similar among potato cultivars. Chloropicrin fumigation significantly increased tuber yield which in cultivars such as Shepody and Umatilla Russet were associated with the amount root galls (r = 0.30; P < 0.03). Results of these studies contradict earlier reports on the use of chloropicrin fumigation for the control of powdery scab. Factors other than inoculum level, such as environmental conditions that affect inoculum efficiency and host susceptibility, may be significant contributors to the development of powdery scab and root gall formation.     

Divergent evolution of rice blast resistance <Emphasis Type="Italic">Pi54</Emphasis> locus in the genus <Emphasis Type="Italic">Oryza</Emphasis>

Background

The rice blast resistance gene Pi54 was cloned from Oryza sativa ssp. indica cv. Tetep, which conferred broad-spectrum resistance against Magnaporthe oryzae. Pi54 allelic variants have been identified in not only domesticates but also wild rice species, but the majority of japonica and some indica cultivars lost the function.

Results

We here found that Pi54 (Os11g0639100) and its homolog Os11g0640600 (named as #11) were closely located on a 25 kbp region in japonica cv. Sasanishiki compared to a 99 kbp region in japonica cv. Nipponbare. Sasanishiki lost at least six genes containing one other R-gene cluster (Os11g0639600, Os11g0640000, and Os11g0640300). Eight AA-genome species including five wild rice species were classified into either Nipponbare or Sasanishiki type. The BB-genome wild rice species O. punctata was Sasanishiki type. The FF-genome wild rice species O. brachyantha (the basal lineage of Oryza) was neither, because Pi54 was absent and the orientation of the R-gene cluster was reversed in comparison with Nipponbare-type species. The phylogenetic analysis showed that #11gene of O. brachyantha was on the root of both Pi54 and #11 alleles. All Nipponbare-type Pi54 alleles were specifically disrupted by 143 and 37/44?bp insertions compared to Tetep and Sasanishiki type. In addition, Pi54 of japonica cv. Sasanishiki lost nucleotide-binding site and leucine-rich repeat (NBS–LRR) domains owing to additional mutations.

Conclusions

These results suggest that Pi54 might be derived from a tandem duplication of the ancestor #11 gene in progenitor FF-genome species. Two divergent structures of Pi54 locus caused by a mobile unit containing the nearby R-gene cluster could be developed before domestication. This study provides a potential genetic resource of rice breeding for blast resistance in modern cultivars sustainability.

     

The Race Structure of the Rice Blast Pathogen Across Southern and Northeastern China

Background

Rice blast, caused by the ascomycete Magnaporthe oryzae (Mo), imposes a major constraint on rice productivity. Managing the disease through the deployment of host resistance requires a close understanding of race structure of the pathogen population.

Results

The host/pathogen interaction between isolates sampled from four Mo populations collected across the rice-producing regions of China was tested using two established panels of differential cultivars. The clearest picture was obtained from the Chinese cultivar panel, for which the frequency of the various races, the race diversity index, the specific race isolate frequency, and the frequency of the three predominant races gave a consistent result, from which it was concluded that the pathogen population present in the southern production region was more diverse than that in the northeastern region. The four blast resistance genes Pi1, Pik, Pik-m, and Piz all still remain effective in the southern China rice production area, as does Pi1 in the northeastern region. The effectiveness of Pita, Pik-p, Piz, and Pib is restricted to single provinces. The distinctive resistance profile shown by the Chinese differential cultivar set implied the presence of at least five as yet unidentified blast resistance genes.

Conclusions

The Chinese differential cultivar set proved to be more informative than the Japanese one for characterizing the race structure of the rice blast pathogen in China. A number of well characterized host resistance genes, in addition to some as yet uncharacterized ones, remain effective across the major rice production regions in China.