Gas-liquid chromatographic and mass spectrometric indentification of chlorinated trifluorotoluene residues in Niagara River fish.

Several unknown halogenated compounds were detected in Niagara River fish using a method similar to the AOAC multiresidue method for chlorinated pesticides in high-moisture foods. From gas-liquid chromatographic-mass spectrometric (GLC/MS) data and GLC retention times on 3 columns, 7 of the compounds were identified as 4-chloro-alpha,alpha,alpha-trifluorotoluene (0.17--2.0 ppm), 2-chloro-alpha,alpha,alpha-trifluorotoluene (0.002--0.1 ppm), 3,4-dichloro-alpha,alpha,alpha-trifluorotoluene (0.02--0.28 ppm), 2,4-dichloro-alpha,alpha-alpha-trifluorotoluene (0.02--0.17) ppm), 2,3-dichloro-alpha,alpha,alpha-trifluorotoluene (trace-0.005 ppm), 2,6-dichlorotoluene (not quantitated), and 2,4,5-trichlorotoluene (0.31 ppm was found in the only sample quantitated). Other isomers of tri- and tetrachloro-alpha,alpha,alpha-trifluorotoluene and di-,tri-, and tetrachlorotoluene were also present in these samples. Recoveries of the specific chlorinated trifluorotoluenes identified in these samples ranged from 86 to 108%.     

Identification of O,O-dialkyl-S-methylphosphorodithioate residues in fish

O,O-Dialkyl-S-methylphosphorodithioates were found in Mississippi River buffalo fish caught near several chemical plants and oil refineries in Hartford and Wood River, IL. These chemicals, which have not been previously recognized as environmental or food contaminants, were identified and quantitated by a procedure similar to the AOAC multiresidue method for organochlorine and organophosphorus pesticides, using gas chromatography (GC) with flame photometric detection (FPD). The key to their identification was a GC/FPD retention time pattern that was virtually the same as that for the diazomethane reaction products of a commercial zinc dialkyl dithiophosphate motor oil additive. GC/mass spectrometry (MS) showed that the compound producing the largest GC/FPD peak contained butoxy groups. The identification of this compound as O,O-di(2-methylpropyl)-S-methyl-phosphorodithioate (Compound C) was confirmed by GC/MS analysis by comparison with the authentic material. The buffalo fish contained 0.15 ppm Compound C and 0.5 ppm total O,O-dialkyl-S-methylphosphorodithioates. Subsequent analyses of fish from other areas showed that these contaminants were not limited to the Hartford-Wood River area. Lower residue levels of Compound C, ranging from 0.01 to 0.05 ppm, were found in fish from the Mississippi River at Sauget, IL, and from the Delaware River and Newark Bay in NJ.     

Determination of chlorinated methylthiobenzenes and their sulfoxides and sulfones in fish

A procedure was developed to determine chlorinated methylthiobenzenes and their respective sulfur oxidation products in fish. Perch samples fortified at the 0.1 ppm level with 2,4,5-trichloromethylthiobenzene, pentachloromethylthiobenzene, and their sulfoxides and sulfones were extracted and cleaned up using an adaptation of the official AOAC method for multiple residues of organochlorine pesticides. The Florisil column cleanup was modified; 200 mL 6% petroleum etherethyl ether eluted the methylthiobenzenes, 200 mL 50% PE-EE eluted the sulfones, and 200 mL EE eluted the sulfoxides. Recoveries determined by electron capture (ECD) gas chromatography (GC) were 75-101% for the methylthiobenzenes and their sulfones and 63-93% for the sulfoxides. Co-extracted materials in the Florisil eluates that interfered with the ECD/GC quantitation were removed by partitioning the sulfoxides and sulfones into sulfuric acid and by thin layer chromatography on silica gel, using methylene chloride-hexane (50 + 50) as the developing solvent. Seven fish samples containing residues of chlorinated benzenes or polychlorinated biphenyls (PCBs) were examined for chlorinated methylthiobenzenes, methylthio-PCBs, and their oxidation products by matching GC retention times obtained with the EC detector and a flame photometric detector operated in the sulfur mode. These analytes were not found in the fish samples above a detection level equivalent to 0.02 ppm 2,4,5-trichloromethylthiobenzene.     

Rapid determination of methyl mercury in fish and shellfish: method development

The AOAC official first action method for methyl mercury in fish and shellfish was modified to provide more rapid determination. Methyl mercury is isolated from homogenized, acetone-washed tissue by addition of HCl and extraction by toluene of the methyl mercuric chloride produced. The extract is analyzed by electron capture gas chromatography (GC) on 5% DEGS-PS treated with mercuric chloride solution. The quantitation limit of the method is 0.25 micrograms Hg/g. Swordfish, shark, tuna, shrimp, clams, oysters, and NBS Research Material-50 (tuna) were analyzed for methyl mercury by the AOAC official first action method. All products also were analyzed by the modified method and the AOAC official method for total Hg. In addition, selected extracts obtained with the modified method were analyzed by GC with Hg-selective, microwave-induced helium plasma detection. There was no significant difference between the results for the various methods. Essentially all the Hg present (determined as total Hg) was in the organic form. Coefficients of variation from analyses by the modified method ranged from 1 to 7% for fish and shellfish containing methyl mercury at levels of 0.50-2.30 micrograms Hg/g. The overall average recovery was 100.5%.     

Identification and gas-liquid chromatographic determination of aryl phosphate residues in environmental samples.

Aryl phosphates are widely used as flame retardant plasticizers and hydraulic fluids. Laboratory exposures of rainbow trout to a commercial phosphate hydraulic fluid in a flow-through system resulted in substantial biomagnification. Aryl phosphate residues in fish are extracted and cleaned up by the AOAC method for pesticides in fatty foods, and are detected by phosphorus-selective gas-liquid chromatography. Residues of several aryl phosphate mixtures were detected in fish near industrial sites at concentrations ranging from 0.04 to 1 ppm (edible portion basis).     

Fungal biotransformation of (+/-)-linalool

The biotransformation of (+/-)-linalool was investigated by screening 19 fungi. Product accumulation was enhanced by substrate feeding and, for the first time, lilac aldehydes and lilac alcohols were identified as fungal biotransformation byproduct using SPME-GC-MS headspace analysis. Aspergillus niger DSM 821, Botrytis cinerea 5901/02, and B. cinerea 02/FBII/2.1 produced different isomers of lilac aldehyde and lilac alcohol from linalool via 8-hydroxylinalool as postulated intermediate. Linalool oxides and 8-hydroxylinalool were the major products of fungal (+/-)-linalool biotransformations. Furanoid trans-(2 R,5 R)- and cis-(2 S,5 R)-linalool oxide as well as pyranoid trans-(2 R,5 S)- and cis-(2 S, 5 S)-linalool oxide were identified as the main stereoisomers with (3 S,6 S)-6,7-epoxylinalool and (3 R,6 S)-6,7-epoxylinalool as postulated key intermediates of fungal (+/-)-linalool oxyfunctionalization, respectively. With a conversion yield close to 100% and a productivity of 120 mg/L.day linalool oxides, Corynespora cassiicola DSM 62485 was identified as a novel highly stereoselective linalool transforming biocatalyst showing the highest productivity reported so far.     

Determination of polybrominated biphenyl residues in dairy products.

A method for the determination of polybrominated biphenyls (PBBs) in dairy products is described. Fat is extracted from the products by the official AOAC method. The PBB residues are separated from the fatty material by gel permeation chromatography prior to gas-liquid chromatographic (GLC) quantitation. An additional cleanup using petroleum ether elution through a miniature Florisil column is necessary for thin layer chromatographic (TLC) confirmation. Recoveries of PBBs from samples fortified at levels from 0.1 to 0.5 ppm ranged from 94 to 104% with an average of 99%. GLC sensitivity permits the estimation of PBB residue levels as low as 0.007 ppm. Routine TLC confirmation is limited by sensitivity to greater than or equal to 0.2 ppm.     

Kinetics of photoirradiation-induced synthesis of soy oil-conjugated linoleic acid isomers

Photoirradiation of soy oil with UV/visible light has been shown to produce significant amounts of trans,trans conjugated linoleic acid (CLA) isomers through conversion of various synthesized intermediate cis,trans isomers. The objective of this study was to determine the kinetics of CLA isomers synthesis to better understand the production of various isomers. Soy oil was irradiated with UV/visible light for 144 h in the presence of an iodine catalyst and CLA isomers analyzed by gas chromatography (GC). Arrhenius plots were developed for the conversion of soy oil linoleic acid (A) to form cis-, trans/trans-, cis-CLA (B), conversion of cis-, trans/trans-, cis-CLA to form trans,trans-CLA (C) with respect to B, and formation of trans,trans-CLA isomers with respect to C. The kinetics of consumption of linoleic acid (LA) to form cis-, trans/trans-, cis-CLA was found to be of second-order with a rate constant of 9.01 x 10-7 L/mol s. The rate of formation of cis-, trans/trans-, cis-CLA isomers depends on the rate of formation from LA and its rate of consumption to form trans,trans-CLA isomers. The conversion of cis-, trans/trans-, cis-CLA isomers to trans,trans-CLA isomers was found to be of first-order with a rate constant of 2.75 x 10-6 s-1. However, the formation of thermodynamically stable trans,trans-CLA isomers (C) with respect to C was found to be a zero-order reaction with a rate constant of 10.66 x 10-7 mol/L s. The consumption of LA was found to be the rate-determining step in the CLA isomers formation reaction mechanism. The findings provide a better understanding of the mechanism of CLA isomers synthesis by photoirradiation and the factors controlling the ratio of various isomers.     

Liquid chromatographic determination of sulfite in grapes and selected grape products

A liquid chromatographic (LC) method is described for the determination of sulfite in grapes and certain grape products. Sulfite is extracted from grapes with aqueous formaldehyde solution buffered at pH 5; free sulfite is converted to hydroxymethylsulfonate (HMS), which is extremely stable at pH 3-7. Subsequent heating to 80 degrees C for 30 min converts reversibly bound forms of sulfite to HMS. The extract is then analyzed by reverse-phase ion-pairing liquid chromatography, using a C18 column and a mobile phase of aqueous 0.005 M tetrabutylammonium ion in 0.05 M acetate, pH 4.7, and a flow rate of 1 mL/min. Aqueous KOH is added to the eluate to convert HMS to free sulfite, which is then treated with 5,5'-dithiobis[2-nitrobenzoic acid]. This reaction produces the 3-carboxy-4-nitrothiophenolate anion, which is determined by measurement of electronic absorption at 450 nm. For grapes spiked with HMS at 5-20 ppm (as SO2), recoveries ranged from 92 to 112%, with a coefficient of variation of 4.6%. The method was also used to determine sulfite in various grape products. Results were comparable to those obtained by the AOAC official Monier-Williams method.     

Analytical characteristics of late-eluting halogenated flame retardants

The analytical characteristics of halogenated flame retardants were studied. Suitable electron capture gas-liquid chromatographic conditions were developed, and retention times and sensitivity responses were obtained. The behavior of these industrial chemicals through the AOAC multiresidue method for nonfatty foods was studied using fish as the test substrate. Of the 24 flame retardants investigated, 23 were recovered (85-110%) using the AOAC method.     

Rapid digestion and flameless atomic absorption spectroscopy of mercury in fish: collaborative study

A collaborative study of the determination of mercury in fish has been completed in which wet oxidation of fish tissue in nitric acid, using vanadium as a catalyst, is compared with the AOAC official final action digestion technique, 25.103-25.105, involving a nitric-perchloric acid mixture. The study used tuna fish samples of known mercury content and included spike recovery studies in which methyl mercury solutions of known composition were provided to each laboratory. The study was designed to provide recovery information that bracketed the regulatory level of mercury in fish. The results indicate that the proposed digestion method is at least as precise and accurate as the AOAC method. The proposed method is also more rapid and less hazardous. It has been adopted as official first action.     

Nitrate determination in baby food, using the nitrate ion selective electrode.

The nitrate electrode has been utilized in the determination of nitrate content in food products. The AOAC xylenol method was employed for comparative results. A reasonable correlation (r=0.91) was found between the 2 methods in the analysis of 49 samples containing 30-350 ppm nitrate. At the average nitrate content (100 ppm) of these foods, the standard error was 4.3 ppm. The electrode responds directly to the ionic activity of the nitrate ion. It has a linear concentration range of 1-6000 ppm nitrate and can be used over a wide pH range. The electrode does respond to some extent to anions other than nitrate, and some interferences do occur. These interferences are easily controlled by the use of cation exchange resins. The Corning known addition (spiking) method is used on all samples to insure correct electrode response in solutions containing variable background ionic composition. The electrode has the advantage of simplicity, speed, reproducibility, and accuracy. Work time saved using the electrode as opposed to the xylenol method is about 7 hr for the analysis of 20 samples. Error, and the need for repeating analysis, is much less frequent.     

Determination of chlorate and chlorite and mutagenicity of seafood treated with aqueous chlorine dioxide.

The use of chlorine dioxide (ClO(2)) as a potential substitute for aqueous chlorine to improve the quality of seafood products has not been approved by regulatory agencies due to health concerns related to the production of chlorite (ClO(2)(-)) and chlorate (ClO(3)(-)) as well as possible mutagenic/carcinogenic reaction products. Cubes of Atlantic salmon (Salmo salar) and red grouper (Epinephelus morio) were treated with 20 or 200 ppm aqueous chlorine or ClO(2) solutions for 5 min, and extracts of the treated fish cubes and test solutions were checked for mutagenicity using the Ames Salmonella/microsome assay. No mutagenic activity was detected in the treated fish samples or test solutions with ClO(2). Only the sample treated with 200 ppm chlorine showed weak mutagenic activity toward S. typhimurium TA 100. No chlorite residue was detected in sea scallops, mahi-mahi, or shrimp treated with ClO(2) at 3.9-34.9 ppm. However, low levels of chlorate residues were detected in some of the treated samples. In most cases, the increase in chlorate in treated seafood was time- and dose-related.     

Dynamic headspace gas chromatography/mass spectrometry characterization of volatiles produced in fish oil enriched mayonnaise during storage

Protection against lipid oxidation and formation of unpleasant fishy and rancid off-flavors in oil-in-water food emulsions, such as fish oil enriched mayonnaise, is difficult to achieve. Volatile profiles from stored mayonnaises with different oil phase compositions were collected using a developed dynamic headspace sampling technique, in which interfering acetic acid was removed in situ with potassium hydroxide, and subsequently 148 volatiles were characterized and monitored by gas chromatography/mass spectrometry. Multivariate statistics showed correlation between the concentration of 62 volatiles and the fish oil and storage parameters, indicating the formation of lipid oxidation products, which impose fishy off-flavors. Further verification was obtained by gas chromatography/olfactometry, by which, among 78 odors, cis-4-heptenal and trans,cis-2,4-heptadienal were detected as distinct fishy notes. In total, 27 volatiles, including 1-penten-3-one, cis-2-penten-1-ol, cis-3-hexenal, cis-4-heptenal, 1-octen-3-one, 1,cis-5-octadien-3-one, 1-octen-3-ol, trans,cis-2, 4-heptadienal, and trans,cis-2,6-nonadienal, were suggested to contribute to the developed unpleasant fishy and rancid off-flavors.     

Conjugated linoleic acid in processed cheeses during the manufacturing stages

Conjugated linoleic acid (CLA) is a naturally occurring micronutrient in milk fat and dairy products consisting of a group of geometric and positional isomers. The purpose of this study was to assess the level and type of CLA isomers found in two commercial processed cheeses (portions and slices) as well as to monitor their evolution during the different manufacturing stages. Total CLA concentrations ranged from 7.5 to 7.9 mg/g of fat, and rumenic acid (cis-9,trans-11 C18:2), the isomer responsible for the biological functions, represented >80% of total CLA. trans-11,cis-13 and trans-11,trans-13 were, with approximately 4% each, the second main CLA isomers. trans-trans isomers accounted for <10% of total CLA. The processing parameters used in this research had negligible effects on the CLA content of processed cheese and did not modify the isomer profile in these dairy products, thereby confirming the stability of rumenic acid during manufacturing.     

Near-infrared reflectance model for the rapid prediction of total fat in cereal foods

AOAC method 996.01, used in cereal foods to determine total fat as defined by the U.S. Nutrition Labeling and Education Act (NLEA), is laborious and time-consuming and utilizes hazardous chemicals. Near-infrared (NIR) reflectance spectroscopy, a rapid and environmentally benign technique, was investigated as a potential method for the prediction of total fat using AOAC method 996.01 as the reference method. Near-infrared reflectance spectra (1104-2494 nm) of ground cereal products (n = 72) were obtained using a dispersive spectrometer, and total fat was determined according to AOAC method 996.01. Using multivariate analysis, a modified partial least-squares model was developed for total fat prediction. The model had a SECV of 1.12% (range = 0.5-43.2%) and a multiple coefficient of determination of 0.99. The model was tested with independent validation samples (n = 36); all samples were predicted within NLEA accuracy guidelines. The results indicate that NIR reflectance spectroscopy is an accurate means of determining the total fat content of diverse cereal products for nutrition labeling.     

Gas chromatographic methods for determination of gamma-BHC in technical emulsifiable concentrates and water-dispersible powder formulations and in lindane shampoo and lotion: collaborative study

Although the gas chromatographic separation of the isomers of BHC was demonstrated two decades ago, the present AOAC method of analysis of BHC for gamma-isomer (lindane) content is based on a separation carried out on a liquid chromatographic partition column. A method of analysis has been developed that uses an OV-210 column for separation of the gamma-isomer from the other isomers and impurities in technical BHC. Di-n-propyl phthalate was chosen as an internal standard. The same system allows quantitation of lindane in lotion and shampoo after these products are extracted with ethyl acetate-isooctane (1 + 4). The analytical methods were subjected to a collaborative trial with 10 laboratories. The coefficient of variation for technical BHC was 2.83%. For the water-dispersible powder and emulsifiable concentrate, the coefficients of variation were 2.89% and 4.62%, respectively. Coefficients of variation for 1% lindane lotion and shampoo were 4.36% and 11.92%, respectively. The method has been adopted official first action.     

Photocatalytic production and processing of conjugated linoleic acid-rich soy oil

Daily intake of conjugated linoleic acid (CLA), an anticarcinogenic, antiatherosclerotic, antimutagenic agent, and antioxidant, from dairy and meat products is substantially less than estimated required values. The objective of this study was to obtain CLA-rich soybean oil by a customized photochemical reaction system with an iodine catalyst and evaluate the effect of processing on iodine and iodo compounds after adsorption. After 144 h of irradiation, a total CLA yield of 24% (w/w) total oil was obtained with 0.15% (w/w) iodine. Trans,trans isomers (17.5%) formed the majority of the total yield and are also associated with health benefits. The isomers cis-9,trans-11 and trans-10,cis-12 CLA, associated with maximum health benefits, formed approximately 3.5% of the total oil. This amount is quite significant considering that total CLA obtained from dairy sources is only 0.6%. ATR-FTIR, 1H NMR, and GC-MS analyses indicated the absence of peroxide and aldehyde protons, providing evidence that secondary lipid oxidation products were not formed during the photochemical reaction. Adsorption processing vastly reduced the iodine and iodocompounds without CLA loss. Photocatalysis significantly increased the levels of CLA in soybean oil.     

Liquid chromatographic-electrochemical determination of ethylenethiourea in foods by revised official method

AOAC official method 29.119-29.125 was revised to determine ethylenethiourea (ETU) directly by a liquid chromatographic-electrochemical (LC-EC) determinative technique and to improve ETU recovery. ETU is extracted from food products with a methanol-aqueous sodium acetate solution. A portion of the concentrated filtrate is added to a column of diatomaceous earth, and ETU is eluted with 2% methanol in methylene chloride to separate it from food coextractives, which are retained on the column. The eluate is collected in a siliconized flask and evaporated, the residue is dissolved in water, and 20 microL of solution is injected onto an LC graphitized carbon column. ETU is eluted from the LC column with a mobile phase of acetonitrile-aqueous 0.1M phosphoric acid-water (5 + 25 + 70), and the eluted ETU is detected by using an amperometric electrochemical detector equipped with a gold/mercury working electrode. Recovery data were obtained by fortifying 13 food products with ETU: baked potatoes; canned applesauce, mushrooms, creamed spinach, green beans, spinach, and tomatoes; cooked fresh cabbage and frozen collards; fresh celery and lettuce; grape jelly; and powdered sugar cake donuts. Raw celery was found to cause low ETU recoveries. Average percent recoveries of ETU from the other 12 food products were 92 with a standard deviation of 12 for the low (0.05 and 0.1 ppm) fortification levels and 90 with a standard deviation of 6 for the higher (0.5 and 1 ppm) fortification levels. The limits of quantitation were 0.01 and 0.02 ppm for food products with low and high sugar content, respectively.     

Determination of nitrite in cured meats by ion-exclusion chromatography with electrochemical detection

A rapid liquid chromatographic (LC) method was developed for a sensitive determination of nitrite in cured meats, using ion-exclusion chromatographic separation and electrochemical detection (IEC-EC). The current AOAC colorimetric method requires 2 h shaking in a steam bath to eliminate interference from reducing compounds such as ascorbic acid. In the present method, nitrite was analyzed in the presence of ascorbic acid without interference, and the extraction time was reduced to 1 min. The extracted nitrite was determined by ion chromatography using anion-exclusion/HS column and amperometric detector equipped with platinum or glassy carbon electrode operating at +1.0 V vs Ag/AgCl reference electrode. The detection limit was 1 ppb as NO2-. The recoveries of 50 ppm nitrite added to frankfurter and meat stick were 103 and 99.6%, respectively, with relative standard deviations less than 4%. The high speed, sensitivity, and selectivity make the new method a useful alternative to the AOAC colorimetric method.