Analysis on the method of selecting nodes on the erosion diagnosisof grounding grid

The number of underdetermined equation, which is limited by the grounding down lines, reduces the grounding grid corrosion diagnostic precision. Based on the grounding grid fault diagnosis method and sensitivity analysis, the value of slip resistance change on the impact of the port resistance in several cases, such as small span, large span and edge, center and symmetrical cross line of the grounding grid, is analyzed. A new method which is used to select the node pairs to calculate the corrosion situation of grounding grid is presented. Based on this method, the simulation analysis and field test has been done. The experimental results show that this method could improve the accuracy and efficiency of grounding grid fault diagnosis.     

A Method for State Diagnosis of Grounding Grid

This paper discuses the method with which the corrosion of the grounding grid can be diagnosed .A grounding grid can handled as a circuit network. With the application of circuit network graph theory and the fault diagnosis theory of analog circuit and optimization, the fault diagnosis equations can be set up. This equations is figured out by Matlab, and the corrosion status of the grounding grid can be deduced from the result.     

Erosion Optimized Diagnosis of Brand Grounding Grid

To find the corrosion of the grid ,large area cutting has been adopting in practice for a very long time. But this method is blind, difficult and influences the system operating. The erosion diagnosis method in the past is effective for the smaller grid. To the brand ones, it can not take effect. The method of separating the grounding grid into several parts and diagnosing step by step is discussed by lots of simulation about middle or brand grounding grid erosion diagnosis. This method makes the brand grounding grid erosion diagnosis quick and truly without power cut and digging large area, satisfies the demand in practice. Putting this optimized diagnosis method into practice , the result is good.     

二维高炉区域BFC网格生成技术及其Matlab实现

利用数学模型对高炉冶炼过程进行模拟是高炉炼铁新工艺研发的有效方法,网格生成技术是数值模拟过程中重要的前处理过程,是高炉模拟计算的先决条件。生成网格的质量对高炉模型模拟的精度、效率以及收敛性具有重要影响,因此,建立优质的网格对高炉数学模型的求解具有重要意义。文中提出了一种适用于高炉数学模型的适体坐标系(BFC)网格的生成方法,从求解区域的划分、椭圆型方程的转换、椭圆型方程的离散及BFC网格生成步骤等方面进行了研究,并把死料区的边界作为BFC网格计算的边界条件,使数学模型的求解过程得以简化。采用带有源项的泊松方程作为变换方程,网格的正交性和疏密程度便于控制。该网格生成算法原理简单、易于编程、网格生成效率高,生成的网格能够满足数学模型求解的要求。     

Compensation trust evaluation model of grid service

It is difficult to distinguish the cheating and other malicious behaviours in the grid service trust evaluation. A trust evaluation model for grid service based on compensation is proposed.With market mechanism, service provider and demander present the expected profit and compensate price for their behaviours to maximize their own profit. The game theory is applied to balance the expected profit and compensate price. Based on the game theory, evaluation trade strategy achieves perfect Bayesian equilibrium. Service provider and demander can choose their own trade strategy to maximize profit. Theoretical analysis and simulation results show that the service demanders can abandon the cheating motivation voluntarily, while the service providers can make right decision to choose trust evaluation. Compared with the existing model, the precision and security of the trust evaluation is enhanced greatly, while the calculating and communication cost is reduced remarkably.     

Opening Architecture of Collaborative Design Grid and Its Key Techniques

OGSA, as a universal grid computing frame, has resolved a good many problems in the CSCD, and provides a new solution for the network-based collaborative design. This paper studied the main problems in application of the grid technology to network-based collaborative design system by the OGSA based the WSRF, which is used as the basic platform of collaborative design grid. The meaning of the collaborative design grid is explained, and then the opening architecture of collaborative design grid design process on the condition of eoll is presented based on the function analysis in detail. Meanwhile, the collaborative aborative design grid is explained, and the key technologies of the collaborative design grid are analyzed deeply. The results provide a solution and groundwork for the more research on the collaborative design grid and its implementation.     

Computation method of magnetic field inverse problem on grounding grids fault diagnosis

Grounding grids are the guarantee of substation running safety. The fault of grounding grids is a threat to people and equipment in substations. A method to diagnose the fault of grounding grids based on magnetic field inverse problem. The inverse problem of magnetic field is established by injecting and extracting a low frequency current. The morbid of inverse problem is solved through regularization and Newton iteration method to obtain the distribution of the mesh currents. The approximate distribution of the magnetic field is calculated to diagnose the fault of the grounding grid. A 4×4 substation grounding grids is taken as an example. By comparison of the forward problem result, the error is under 3%, so the prposed method of inverse problem is verified. The selection of measurement point is discussed, and 40% of the number of meshes is accounted to approximate the real distribution of the magnetic field on the grounding grids.     

Limiting the Arc Over-voltage of 10 kV Grids in Application of Nonlinear Resistance

The aufhors calculate and analyze the arcing grounding overvoltage of 10 kV power network in case of neutral ungrounded and grounding through nonlinear resistance using EMTP, with a actual 10 kV power network of a substation in Guizhou province as an example. The emulational calculation results show that the grounding method which grounds through nonlinear resisitance has the advantages of the other two methods, can better limit the arcing grounding overvoltage and can not stop the power supply .even one phase is grounded by fault, so it can ensure the security of the power networkg supply . the network neutral grounding through nonlinear resistance needs more deep study and analysis as a new network neutral grounding mehtod.     

Grid Workflow Management System Research and the Realization Based on the OGSA

Grid applications have evolved from science research to business and manufacture field, in these fields, tasks always process in workflow mode. In order to found a workflow management system in grid , the authors adopt a hybrid grid workflow engine after analyzing the characteristics of grid environment and give a referenced model of workflow management system in grid that is based on the engine. Through the examination, the authors prove the original intention is feasible.     

Grounding Resistance Calculation Methods of SZJ Grounding System

With theoretic analysis, lab experiment and engineering application, it is indicated that the SZJ grounding system is a new type grounding system which distinctly reduces the grounding impedance of grounding grids, especially of grounding grids in the zones with high-resistivity or grounding grids with scanty area. The design and calculation method for application of SZJ grounding system is also studied.     

山地城市热环境及其聚落特征的关联分析

以重庆主城区为研究对象,利用Landsat 8传感器OLI和TIRS获取的遥感影像为数据源,进行城市聚落特征包括地形特征、土地利用等与地表温度的差异性分析。结果表明：城市的热环境空间分布差异较大,海拔高度对温度的影响强于地形起伏度;（NDVI、NDBI、MNDWI等）和地表温度的相关关系呈分段线性关系;不同土地利用类型的热强度和热变异程度差异明显,建设用地的温度最高且斑块温度间的变异性最强,虽然水体的平均温度最低,但斑块温度间的变异性却较高;从格网分析的结果可以看出,格网内部水体的“冷岛效应”明显、建设用地的“热岛效应”显著,耕地与自然植被面积的增加使得各空间格网温度更趋向于稳定。     

地理信息网格与数字农业建设刍议

网格技术是网络环境下海量数据管理和信息共享的有效方法。地理信息网格是网格技术在地理空间技术领域的应用,作为农业空间信息网格的基础,它是实现农业信息共享与服务的有效途径。地理信息网格在数字农业领域的广泛应用将深刻影响农业信息系统的规划部署、运行和管理机制,提高农业信息资源共享程度和使用效率,推进数字农业建设的步伐。     

Distributed Data Mining on the Grid

Distributed data mining(DDM) is widely used in industrial,scientific and commercial applications to analyze large datasets maintained over geographically distributed sites,which makes DDM a major research issue on(today's) data mining field.This paper discusses the disadvantages of existing DDM systems,puts forward a service-oriented architecture for DDM on the grid and describe the process of mining under this framework.In the proposed,serviceoriented,cross-platform framework,the mining algorithm and distributed data sets are packed into the Web Service Resources(WS-Resource) respectively,which can cooperate to perform DDM as required dynamically.Finally,a grid based on local area network was built with Globus Toolkit 4.0 and take an example of association rule mining to illustrate how to work with the proposed architecture.     

Research on reliability evaluation model for frequency collapse of power grid

In order to comprehensively consider the possibility and the severity of frequency instability risk, this paper proposes the risk evaluation model and algorithm for frequency collapse of power grid. The uncertainties in generating dispatch, network topology and component outage are considered. The calculation method for system frequency variation is depicted while considering the active power deficiency arising from random failure of generating units, and then various probabilistic risk indices for frequency collapse are defined. The presented method can provide important reference information for evaluating the frequency collapse risk of power grid. The non-sequential Monte Carlo simulation-based results of IEEE-RTS79 show the correctness of the method.     

On the optimum grid size in field experiments without replications

Summary In unreplicated field trials a correction for soil heterogeneity is easily achieved by gridding, i.e. by expressing the observations as deviations from a local average. This paper investigates the problem of determining the optimum size of such a neighbourhood to be used in a moving average. The optimum grid size depends on two parameters, i.e. the coarseness of the spatial variation of the trial field and the ratio of genotypic vs. non-genotypic variance. In general these parameters are not known to the breeder. We introduce a method for estimating these parameters from the data. From these estimates the optimum grid size can be obtained using tables presented in this paper.The method has been evaluated by applying it to a series of simulated data. It turned out that the agreement between estimated and true optimum grid size was satisfactory in these simulations.Some theoretical aspects of the results are discussed.     

Load balancing strategy and ant optimization algorithm for grids

In view of the Campus Grid construction,which is also a crucial part of ChinaGrid project,the performance decline for grid scheduling algorithms when non-dedicated nodes emerge in multi-grid environment is studied.A load balancing algorithm to optimize resource usage rate is proposed.The paper involves three parts: problem modeling,algorithm design,and experiment evaluation.The experimental results show that the proposed algorithm is effective for solving the problem of resource usage rate decline under the discussed grid circumstance.     

Analysis on the stability of traffic flow with the information of two preceding cars

The stability analysis is one of the important problems in the traffic flow theory, where the congestion phenomena can be regarded as the instability and the phase transition of a dynamical system. An extended optimal velocity model is deduced by considering the effect of the information of two leader cars. The stability condition of the extended model is obtained by using the linear stability theory. The modified Korteweg-de Vries (mKdV) equation is derived to describe the traffic behavior near the critical point by applying the nonlinear analysis. The numerical simulation results demonstrate the analytical results and show that the traffic congests are suppressed more efficiently by considering two vehicles ahead. Therefore, the next-nearest-neighbor car has strong effects on traffic dynamics and plays an important role on stabilizing the traffic flow.     

Research of CAD System for Space -grid Structures Based on ObjectARX

This paper first presented the architecture of the CAD system for space - grid structures based on ObjectARX, then some key technologies were studied to realize the system, such as interface control method on MFC, graphic database and parametric drive. A CAD system for space -grid structures based on ObjectARX was develooed with AutoCAD API and the Object- oriented technique.     

Mechanism of Resource Discovery Based on Trust Network

How to effectively locate resources is a very important factor affecting the performance of Grid environment.The authors propose a novel method which utilizes trust relations existed implicitly among network nodes to construct a secure and available resource trust network(SARTN),meanwhile provide the theory and method of SARTN.Combining passively discovery with actively discovery,applying Small World theory,optimized time complexity is achieved, and the performance of Grid resource discovery is promoted.Through analysis,the proposed solution is scalable,secure and efficient in Grid.     

计及电网停电风险的输电线路动态融冰决策方法

电网发生大面积冰灾情况时,多条输电线路存在覆冰故障隐患,电网稳定运行受到严重威胁,需要提前制定输电线路融冰方案,合理安排融冰顺序。针对此问题,分析输电线路覆冰继续运行给电网带来的停电风险,将与待融冰输电线路相关联的变电站的电气主接线展开,将传统削负荷模型改进后应用于输电网与变电站主接线的组合网络,建立断路器可靠性模型,计算靠后融冰线路因继续运行的电网停电风险;利用计及风速及降雨影响的输电线路覆冰增长预测模型,计算输电线路的覆冰率,根据覆冰率门槛值确定待融冰线路集,基于覆冰严重度模型构建系统全局的覆冰指数指标;综合考虑电网停电风险及系统全局覆冰指数建立输电线路融冰紧迫度指标,动态更新待融冰线路并决策融冰顺序。最后,以IEEE RBTS系统进行算例分析,验证了所提方法的可行性与合理性。