加气对滴头堵塞行为的影响

为探明加气滴灌下滴头堵塞规律及影响因素,选用4种不同特征参数(流量Q、最小断面尺寸min(W,D)和入水栅格面积M)的内镶贴片式滴头E1,E2,E3和E4,分别在加气(AI)和未加气(CK)条件下进行了滴头堵塞测试,并通过泥沙絮凝沉降试验对其结果进行了验证.结果表明:加气和滴头结构对滴头堵塞性能具有显著影响(P<0.05).加气加剧水中泥沙颗粒的絮凝沉降、加速絮凝颗粒在毛管内和流道入口的黏附、增大滴头入口发生突然堵塞风险是造成加气加剧滴头堵塞的主要原因;当选择入口尺寸较大的E4滴头时,其流道入口堵塞风险降低、流道内泥沙絮凝沉降速率减缓而表现出加气减缓滴头堵塞,而选择入口尺寸较小的E1—E3滴头时,其毛管内泥沙絮凝沉降速率增大、滴头入口堵塞风险增高而表现出加气加剧滴头堵塞.     

Effects of Treflan injection on winter wheat growth and root clogging of subsurface drippers

The clogging of drippers caused by crop root intrusion has been a great concern of subsurface drip irrigation (SDI) systems. To attempt to solve the problem of root clogging of drippers, a series of field experiments were conducted in the growing seasons of 2006-2008. The goal was to investigate the effects of Treflan injection on dripper clogging by roots, and on root distribution, yield, and the quality of winter wheat (Triticum aestivum L.) under SDI. For each growing season, two Treflan injection dates (March 6 and April 15 for the 2006-2007 growing season, and March 6 and April 15 for the 2007-2008 growing season) and three injection concentrations of 0, 3, and 7 mg/l were arranged in a randomized block experimental design. During harvest, root length density (RLD) and Treflan concentration at different soil layers were measured using the auger-sampling method. Thirty-five drippers from each treatment were randomly chosen to observe evidence of root intrusion into the dripper flow passage in order to estimate root clogging. The experimental results showed that Treflan injection could effectively reduce root density in areas adjacent to drippers, thereby significantly decreasing the potential of root clogging. In 2007, 4 out of the 35 drippers were found with root intrusion problems in the control (without Treflan injection), while no root clogging existed any dripper in Treflan application treatments. In 2008, 6 drippers from the control but only 1 dripper from those treated with Treflan application showed root clogging. In addition, within the range of concentration used by the current experiment, Treflan concentrations had no significant effects on winter wheat root distribution, yield, and quality. Injection date, however, influenced the vertical root distribution significantly. Injection of Treflan late in the growing season influenced the root distribution only in the areas close to the drippers; the influenced areas increased if Treflan was injected early in the growing season.     

手摇清洗网式过滤器水力性能试验研究

[目的]测试手摇清洗网式过滤器性能,为微灌过滤器的选型提供技术支撑.[方法]针对A(AZUD)和B(ARKA)2种常用型号手摇清洗网式过滤器,通过清水试验,获得了清洁压降曲线;通过含沙水试验,分析对比了 2种过滤器在不同流量和含沙量条件下的过滤效果;针对B型过滤器开展了排污效果试验,验证了手摇清洗网式过滤器清污能力.[...     

Influence of fine particle size and concentration on the clogging of labyrinth emitters

The evolution of drip emitter clogging with labyrinth channel was investigated experimentally to study the fine particle size and concentration effects in the irrigation water. Short-term clogging tests were performed using muddy water containing particles with 8 different sizes (all less than 0.1 mm). The particles used in this study were composed of fine sands, slit and clay. Afterwards, verification tests were conducted to prove the results obtained from short-term clogging tests. The impacts of particle size and particle concentration in muddy water on emitter clogging were analyzed by means of calculating the mean discharge and the Christiansen uniformity coefficient. The results showed that for particles that were smaller than 0.1 mm in diameter, sediment concentration significantly affected clogging. The clogging level of emitters increased with raising the concentration. Especially when the sediment concentration was higher than 1.25 g/L, the impacts became remarkable. On the other hand, the sensitive sediment particle range that could get emitters clogged easily was found. In this study, the sensitive particle range were D6 (0.038–0.034 mm) and D7 (0.034–0.031 mm) The results aim to help in improving drip irrigation methods using water with high sediment concentration and providing experimental data for optimization design of emitter channel.     

不同动态水压模式下迷宫流道内颗粒物运动特性研究

采用PTV技术,观测三角函数、三角、台阶、矩形波形动态水压模式下迷宫流道内颗粒物的运动情况,分析不同动态水压模式下迷宫流道内单个颗粒物运动轨迹、运动速度及流体流场,揭示动态水压抗堵塞机理。结果表明:相对于三角、台阶及矩形波形动态水压模式,三角函数波形动态水压模式下颗粒物滞留滞止区内的时间最短,颗粒物的沉积概率最小,水流对颗粒物的输移能力最大;三角函数波形动态水压模式下流道内产生的水流波动效应不断冲击流道滞止区内存在的低速漩涡,加剧了滞止区水流紊动,进入滞止区的颗粒物随水流不断运动,并对滞留甚至沉积在滞止区内的颗粒物发生强烈冲击,使得颗粒物离底悬浮,返回主流区,并迅速通过流道,增大了水流对颗粒物的输移能力,增强了流道的抗堵塞性能。     

黄土堆积体植物篱减沙效益与泥沙颗粒分形特征研究

为探究植物篱措施对工程堆积体边坡的减流减沙效益及其对侵蚀泥沙颗粒分形维数的影响,以堆积体未防护边坡为对照,以不同放水流量对不同坡度堆积体植物篱防护边坡进行了放水冲刷试验。结果表明:与对照相比,植物篱边坡初始产流时间滞后100~500 s,其产流率、产沙率整体均较小,产流率在时间尺度上表现为间歇性波动上升;植物篱减流效率在4%~60%之间,减沙效率范围在15%~50%之间,减流减沙效率均随坡度和放水流量的增加呈幂函数形式减小;各处理侵蚀泥沙颗粒中粉粒均占主导地位,黏粒次之,砂粒含量最少。与对照小区相比,植物篱防护边坡侵蚀泥沙砂粒体积分数降低,黏粒和粉粒体积分数升高;黏粒富集率增加,砂粒富集率减小,泥沙颗粒分形维数增大。分形维数与黏粒和砂粒体积分数之间均呈极显著线性相关,侵蚀泥沙颗粒分形维数主要由黏粒体积分数决定。     

引黄滴灌水源中泥沙表面附生生物膜的分形特征

为了解决灌水器堵塞这个制约引黄滴灌技术应用和推广的关键问题,联合运用扫描电镜测试法和分形理论对黄河泥沙颗粒表面形貌进行了分析,结果表明:黄河泥沙颗粒表面形貌表现为以固体颗粒、微生物及其分泌的黏性胞外聚合物形成的复杂生物膜结构.黄河泥沙颗粒表面具有显著的分形和多重分形特征,简单分形维数虽然能从整体上表征颗粒物表面形貌的复杂性与不规则性,但未能刻画颗粒物局部奇异性的微观特征,而多重分形谱可以定量描述这种复杂泥沙颗粒形貌特征.黄河泥沙借助其巨大的表面积,吸附了大量的微生物,微生物分泌的胞外聚合物质量浓度高达276.08~360.68 mg/L,这就要求在控制引黄滴灌系统灌水器堵塞时,需要从以往单纯考虑泥沙颗粒物本身转变为综合考虑泥沙颗粒和微生物的耦合作用,寻求更为有效的堵塞控制策略.     

压力水头对微润灌溉土壤水分运移试验研究

为了探明微润灌溉湿润体特性,采用黏性土壤和3个水头(1.5,2.0,2.5 m)进行试验,分析微润管的入渗速率、累计入渗量、湿润体体积及湿润体含水率分布特征,同时探讨了含沙量为1.0 g/L的水质在3种水头压力下的堵塞问题.研究表明:土壤累积入渗量与压力水头呈正相关,与时间呈负相关;粒径为0.061~0.100 mm的浑水试验中,试验初期3个不同水头下的流量相差较小,24 h后流量相差逐渐增大,压力水头增大对微润带的堵塞情况有改善作用;微润灌溉湿润体形状近似圆柱状,湿润锋行进半径与压力水头呈正相关,建立了压力水头与湿润体体积的预测模型;不同压力水头下各方向的湿润锋扩散指数都约为0.42;湿润体体内含水率呈同心圆分布,随半径增大而减小,靠近微润管壁2 mm处含水率最大,土壤水分移动主要动力为压力水头和土壤势能之差.研究结果可为微润灌溉提供科学的理论依据和理论基础.     

‘Microbigation’: delivery of biological control agents through drip irrigation systems

The uniform and precise application of microbial particles close to the target organism and to the plant to be protected can increase the success of a biological control treatment. The use of systems or technologies which are usually available in agriculture could influence the acceptability of biocontrol agents by farmers, and enlarge the market. A pilot system was realized using dripper lines, drippers, filters and other tools commonly used in irrigation and precision agriculture in the greenhouse to evaluate their suitability for applying and distributing microbial biocontrol agents. Conidial suspensions of marketed or marketable agents were used, i.e. Fusarium oxysporum, F. solani, Trichoderma harzianum and Paecilomyces lilacinus. The experiments carried out demonstrated that conidial suspensions (10⁶ conidia ml⁻¹) can pass through the drippers without causing clogging, regardless of their size, and remained viable. The term ‘microbigation’ is here proposed for this kind of microbial application technique.     

温度对施肥滴灌系统滴头堵塞的影响

为探究不同灌水温度下水肥一体化滴灌滴头堵塞成因与过程,采用固定周期间歇滴灌的多因素完全随机试验设计方法,分别在冬、夏两个季节研究了3种不同泥沙级配浑水与3个不同施肥质量浓度组合对滴头堵塞的影响和堵塞变化过程。结果表明,灌水温度是影响滴头堵塞的重要因素,与水质交互耦合效应显著,夏季施肥和未施肥2种情况下灌溉滴头的抗堵塞性能均高于冬季,夏季有效灌水次数是冬季的1.26~1.43倍;施肥加速滴头堵塞的作用受泥沙级配和灌水温度的影响,冬季灌溉水中0.034~0.1 mm粒径粗颗粒含量越多,施肥质量浓度对堵塞的影响越敏感,夏季灌溉水中0~0.034 mm细颗粒越多,施肥质量浓度对堵塞的影响越敏感。建议灌水温度较低时,水肥一体化滴灌应控制在较低的施肥质量浓度下灌溉,适当增大次灌水时间,减少灌溉次数。     

Trickle irrigation: Emitter clogging and other flow problems

Trickle irrigation experiments with Colorado River water on citrus trees in southwestern Arizona were conducted to develop water treatment methods for preventing emitter clogging and maintaining long-term operation of the system under actual field conditions. Eight trickle emitter systems in combination with six water treatments were evaluated during a comprehensive 4-year study. Emitter clogging was related to emitter design and to degree of filtration treatments of Colorado River water. If not positioned upright, emitters designed with moving parts were more susceptible to malfunctioning and clogging. Emitters with flexible membranes either failed after a few months of use with chemically conditioned water or showed serious deterioration and decomposition after 4 years. Five of the eight emitter systems required sand and screen (200 mesh) filtration plus chemically conditioned water to keep suspended materials from physically clogging the emitter. However, two emitter systems with the same design but different flow rates have continued to operate with only screen (50 mesh) filtration. For emitters unaffected by material deterioration, the water conditioned continuously with acid alone was just as effective as a combination of continuous or intermittent chlorine and acid treatments in reducing emitter clogging. The dominant causes of emitter clogging and flow reduction were physical particles; next, and minor in comparison, was the combined development of biological and chemical deposits.     

细小泥沙对半透膜微润管堵塞的影响

为探明半透膜微润管对细小泥沙抗堵塞性能的影响,采用有压连续灌水方式对微润管3种粒径组成小于0.100 mm的泥沙颗粒进行了不同质量分数浑水灌溉堵塞试验.分析了泥沙粒径、含沙量以及压力水头对灌水器堵塞的影响,同时探讨了灌水器发生堵塞时的敏感粒径范围和含沙量质量分数值.试验结果表明:随着浑水含沙量的增大堵塞越严重,呈正相关关系;粒径在0.061 0 mm~0.100 0 mm对微润管的堵塞影响最大;相同水质条件下,随着压力水头的增大微润管堵塞程度会降低.研究结果为进一步利用半透膜微润灌溉技术提供了相关的理论基础.     

线源滴灌土壤湿润均匀性的影响因素试验研究

线源滴灌设计中,滴灌管出流均匀性与土壤湿润均匀性有本质不同,前者仅仅是后者必要的基础,但是要保证线源滴灌土壤湿润均匀性,还需要考虑滴头间距、滴头流量、滴水量和土壤质地的差别。对影响线源滴灌土壤湿润均匀性的主要因素进行了试验研究。试验中所用土壤为沙土和沙壤土;滴头间距为30 cm和50 cm;滴头流量为0.3~4 L/h;滴水量为10~25 L不等。试验表明,沿滴灌管方向的土壤湿润均匀度取决于湿润区的交汇程度,而湿润区的交汇程度又取决于土壤湿润区水平运移宽度和滴头间距。沙土沿滴灌管方向的土壤湿润均匀度随滴水量的增大而显著增大,沙壤土的相应指标则随滴头流量的增大而增大。土壤湿润均匀度随滴头间距的增大而减小。线源滴灌设计时,粘粒含量较少的土壤应该有一定的设计湿润深度和较小的滴头间距才能保证其湿润均匀度满足设计要求。研究结论对完善滴灌技术设计理论有帮助。     

低压滴灌施肥条件下温度对滴头堵塞的影响

【目的】探究低压滴灌施肥条件下温度对滴头堵塞的影响。【方法】采用短周期间歇灌水试验方法,考虑温度、运行压力、肥料质量浓度等因素,展开完全随机试验,研究滴头堵塞过程,寻求适宜的加肥质量浓度阈值。【结果】温度越高、运行压力越大、加肥质量浓度越低滴头堵塞风险越小;温度40℃时,运行压力50kPa、加肥质量浓度3g/L的处理具有最高的平均相对流量、均匀度系数以及最低的堵塞率;不同温度下加肥质量浓度阈值不同,温度10、20、30、40℃时加肥质量浓度阈值分别为4、5、7和8g/L。【结论】升高温度、提高运行压力、降低加肥质量浓度能有效降低滴头堵塞风险;升高温度还能提高加肥质量浓度阈值及水流携带固体颗粒的能力,但升高温度对滴头堵塞风险的降低程度随着压力的升高而减弱。     

试论我国滴头性能技术指标和结构型式的选择问题

本文论述了滴头主要性能技术指标流态指数x,制造偏差系数C_v和流量指标q大小对系统费用、抗堵性能、灌水质量的影响;滴头流道或孔口结构与技术指标和抗堵能力的关系;对我国制造的滴头性能技术指标作出初步评价,并提出了我国滴头性能技术指标和改进流道结构的建议。     

滴头锯齿型迷宫流道消能特性的流体动力学分析

在对所选取的3种代表性锯齿型迷宫式滴头流道参数进行精确测定的基础上,利用圆管紊流理论和CFD流场模拟软件对锯齿形迷宫流道的消能机理进行了研究。结果表明：光滑圆管紊流理论不足以解释锯齿型迷宫流道的消能机理;压力沿流道长度方向呈线性递减,各消能尖角单元压力损失相等,符合线性叠加规律;摩阻系数随着压力增加而降低,并很快稳定在一定数值上;在中、高压区滴头流道内部流动为紊流,在低压区可能存在从层流到紊流或者光滑紊流到全紊流的流态转捩行为。     

浑水特性与水温对滴头抗堵塞性能的影响

为探明迷宫流道滴头发生物理堵塞的成因及过程,采用分段粒径浑水周期间歇滴灌的试验方法,分别对含沙量、泥沙颗粒粒径和水温对滴头堵塞发生过程的影响进行研究。结果表明:对于泥沙颗粒粒径小于0.1 mm的浑水滴灌而言,粒径越小越易造成滴头堵塞,且其堵塞程度随浑水含沙量的升高而急剧升高;存在造成滴头堵塞的敏感粒径范围,在夏季灌溉时小于0.031 mm的粒径为易堵塞粒径;水温是影响滴头堵塞的重要因素,水温越高滴头的抗物理堵塞性能越好。     

Soil surface water repellency induced by treated wastewater irrigation: physico-chemical characterization and quantification

Irrigation with treated wastewater (TWW) is commonly practiced in Israel to relieve freshwater (FW) shortages. We hypothesized that the organic matter (OM) originating from TWW irrigation alters the physico-chemical properties of the soil, induces water repellency in the soil’s top layer, and consequently alters water distribution in the soil profile. In measurements taken in an avocado orchard on a clayey soil, water repellency was found in TWW-irrigated plots. In addition, smaller wetted surface areas were recorded around the drippers in comparison with FW drippers. Drier zone below soil surface was observed in TWW-emitting drippers. OM extraction from the different plots exhibited differences in quantity and quality of organic substances between TWW- and FW-irrigated soils, with a higher quantity of hydrophobic substances in the TWW-irrigated soil extract.     

Preliminary surface topographical characteristics of biofilms attached on drip irrigation emitters using reclaimed water

Drip irrigation is the most effective and reliable method for reclaimed water irrigation. Emitter clogging is the bottleneck to restrain the application and popularization of reclaimed water drip irrigation technology, and some researchers have reported that this was tightly related to the formation of biofilms in the irrigation system. We selected reclaimed water treated with cyclic activated sludge system (CASS) and four kinds of labyrinth emitters in cusp-shaped saw-tooth, rectangular straight-tooth, arc-shaped saw-tooth and arc-angular straight-tooth and studied the surface topographical characteristics of biofilms in different positions of reclaimed water drip irrigation emitters with the 3D white-light scanning interferometer (WLSI). The results showed that biofilms in different positions of units were different with each emitter while showing the largest thickness in water-side tooth-tip zone (>20 μm); the biofilm thickness in the same monitoring sites inside one unit segment gradually decreased along the flow direction, while the flow at the inlets was much larger than that at the outlets; comparing the head, middle and tail parts, the biofilm thickness at the inlet and outlet showed the largest in the tail part, followed by the middle and the head parts. This can be explained by the equilibrium relation between hydrodynamic behavior and the transportation of nutrient and particles inside the emitters. The water-side tooth-tip zone of the first unit in the last emitter was selected to monitor surface topographical characteristics of biofilms, and its biofilm thickness also could be used as the indicator for evaluating the characteristics of surface topography. These results were aimed to provide references to explain the emitter clogging mechanism of reclaimed water drip irrigation as well as its technological application and popularization.     

微润灌溉系统堵塞评价及处理方法研究

为了探究微润灌溉堵塞问题及提出合理的解决办法,通过田间试验进行了微润管堵塞和灌水均匀度的评价,以及进行了抗堵塞试验分析。结果表明:微润管出流量随着使用时间的延长递减;堵塞程度加深对使用时长增加表现为"敏感-微敏感-极度敏感"的动态变化特征;灌水均匀度系数Cu等于87.6%,能满足现行技术规范的要求;用微润管抗堵塞肥料清洗微润管,流量基本能恢复到额定流量的水平,微润灌溉抗堵塞肥料的清洗效果要好于洗涤液的清洗效果。研究可为解决微润灌溉堵塞问题及其推广应用提供理论依据。