SoilFlex: A model for prediction of soil stresses and soil compaction due to agricultural field traffic including a synthesis of analytical approaches

Soil compaction is one of the most important factors responsible for soil physical degradation. Soil compaction models are important tools for controlling traffic-induced soil compaction in agriculture. A two-dimensional model for calculation of soil stresses and soil compaction due to agricultural field traffic is presented. It is written as a spreadsheet that is easy to use and therefore intended for use not only by experts in soil mechanics, but also by e.g. agricultural advisers. The model allows for a realistic prediction of the contact area and the stress distribution in the contact area from readily available tyre parameters. It is possible to simulate the passage of several machines, including e.g. tractors with dual wheels and trailers with tandem wheels. The model is based on analytical equations for stress propagation in soil. The load is applied incrementally, thus keeping the strains small for each increment. Several stress–strain relationships describing the compressive behaviour of agricultural soils are incorporated. Mechanical properties of soil can be estimated by means of pedo-transfer functions. The model includes two options for calculation of vertical displacement and rut depth, either from volumetric strains only or from both volumetric and shear strains. We show in examples that the model provides satisfactory predictions of stress propagation and changes in bulk density. However, computation results of soil deformation strongly depend on soil mechanical properties that are labour-intensive to measure and difficult to estimate and thus not readily available. Therefore, prediction of deformation might not be easily handled in practice. The model presented is called SoilFlex, because it is a soil compaction model that is flexible in terms of the model inputs, the constitutive equations describing the stress–strain relationships and the model outputs.     

Measurement and modelling of the effects of initial soil conditions and slope gradient on soil translocation by tillage

Tillage erosion studies have mainly focused on the effect of topography and cultivation practices on soil translocation during tillage. However, the possible effect of initial soil conditions on soil displacement and soil erosion during tillage have not been considered. This study aims at investigating the effect of the initial soil conditions on net soil displacement and the associated erosion rates by a given tillage operation of a stony loam soil. Tillage erosion experiments were carried out with a mouldboard plough on a freshly ploughed (pre-tilled) soil and a soil under grass fallow in the Alentejo region (Southern Portugal).

The experimental results show that both the downslope displacement of soil material and the rate of increase of the downslope displacement with slope gradient are greater when the soil is initially in a loose condition. This was attributed to: (i) a greater tillage depth on the pre-tilled soil and (ii) a reduced internal cohesion of the pre-tilled soil, allowing clods to roll and/or slide down the plough furrow after being overturned by the mouldboard plough.

An analysis of additional available data on soil translocation by mouldboard tillage showed that downslope displacement distances were only significantly related to the slope gradient when tillage is carried out in the downslope direction. When tillage is carried out in the upslope direction, the effect of slope gradient on upslope displacement distances was not significant. This has important implications for the estimation of the tillage transport coefficient, which is a measure for the intensity of tillage erosion, from experimental data. For our experiments, estimated values of the tillage transport coefficient were 70 and 254 kg m⁻¹ per tillage operation for grass fallow and pre-tilled conditions, respectively, corresponding to local maximum erosion rates of ca. 8 and 35 Mg ha⁻¹ per tillage operation and local maximum deposition rates of ca. 33 and 109 Mg ha⁻¹ per tillage operation.     

Vulnerability of Bavarian silty loam soil to compaction under heavy wheel traffic: impacts of tillage method and soil water content

Soil compaction caused by traffic of heavy vehicles and machinery has become a problem of world-wide concern. The aims of this study were to evaluate and compare the changes in bulk density, soil strength, porosity, saturated hydraulic conductivity and air permeability during sugar beet (Beta vulgaris L.) harvesting on a typical Bavarian soil (Regosol) as well as to assess the most appropriate variable factors that fit with the effective controlling of subsequent compaction. The field experiments, measurements and laboratory testing were carried out in Freising, Germany. Two tillage systems (conventional plough tillage and reduced chisel tillage) were used in the experiments. The soil water contents were adjusted to 0.17 g g⁻¹ (w₁), 0.27 g g⁻¹ (w₂) and 0.35 g g⁻¹ (w₃).Taking the increase in bulk density, the decrease in air permeability and reduction of wide coarse pore size porosity (−6 kPa) into account, it seems that CT (ploughing to a depth of 0.25 m followed by two passes of rotary harrow to a depth 0.05 m) of plots were compacted to a depth of at least 0.25 m and at most 0.40 m in high soil water (w₃) conditions. The trends were similar for “CT w₁” (low soil water content) plots. However, it seems that “CT w₁” plots were less affected than “CT w₃” plots with regard to bulk density increases under partial load. In contrast, diminishments of wide coarse pores (−6 kPa) and narrow (tight) coarse pores (−30 kPa) were significantly higher in “CT w₁” plots down to 0.4 m. Among CT plots, the best physical properties were obtained at medium soil water (w₂) content. No significant increase in bulk density and no significant decrease in coarse pore size porosity and total porosity below 0.2 m were observed at medium soil water content. The soil water content seemed to be the most decisive factor.It is likely that, CS (chiselling to a depth of 0.13 m followed by two passes of rotary harrow to a depth 0.05 m) plots were less affected by traffic treatments than CT plots. Considering the proportion of coarse pore size porosity (structural porosity) and total porosity, no compaction effects below 0.3 m were found. Medium soil water content (w₂) provides better soil conditions after traffic with regard to wide coarse pore size porosity (−6 kPa), air permeability (at 6 and 30 kPa water suction), total porosity and bulk density. Proportion of wide coarse pores, air permeability and bulk density seems to be suitable parameters to detect soil compaction under the conditions tested.     

Total and labile soil organic nitrogen as influenced by crop rotations and tillage in Canadian prairie soils

Crop rotations and tillage practices influence the quantity and quality of soil organic N (SON). We evaluated the impact of crop rotations and tillage practices on SON and mineralizable N at a depth of 0–15 cm in six field experiments, varying in duration over 8–25 years, that were being conducted in three Chernozemic soil zones in Saskatchewan, Canada. In a Brown Chernozem, continuous wheat increased SON at 0–15 cm by 7–17 kg N ha^–1year^–1 more than fallow/wheat. In a Dark Brown Chernozem, continuous cropping increased SON by 30 kg N ha^–1year^–1, compared with cropping systems containing fallow once every 3 years; and, in a Rego Black Chernozem, the increase in SON was 29 kg N ha^–1 year^–1, compared with cropping systems containing fallow once every 4 years. The increase in SON due to increased cropping frequency was accompanied by an increase in the proportion of mineralizable SON in the Brown Chernozem, but not in the Dark Brown and Black Chernozems. In the Brown Chernozemic soil zone, no-tillage management increased SON, compared with conventional tillage, varying from 16 kg N ha^–1year^–1 to 28 kg N ha^–1year^–1. In the Dark Brown Chernozemic soil zone, it increased SON by 35 kg N ha^–1year^–1 and, in the Black Chernozemic soil zone, by about 40 kg N ha^–1year^–1. Increases in SON at a depth of 0–7.5 cm due to no-tillage management was accompanied by a greater increase in the mineralizable N for Hatton fine sandy loam, Melfort silty clay and Indian Head clay than for other soils, indicating that the material responsible for the increased SON due to no-tillage was more labile than the soil humus N. However, the increased SON under no-till in Swinton loam, Sceptre clay and Elstow clay loam was not associated with an increase in the mineralizable N, indicating that this increased SON was no more susceptible to decomposition than the soil humus N. Therefore, increases in SON under improved management practices, such as conservation tillage and extended crop rotations, do not necessarily increase the potential soil N availability.     

Evaluation of bulk density of Albaqualf soil under different tillage systems using the volumetric ring and computerized tomography methods

The volumetric ring and the computerized tomography (CT) techniques were applied to study soil bulk density, in order to understand the compaction of an Albaqualf soil (Planosol) of the Rio Grande do Sul State, Southern Brazil (latitude 31°52′00″S and Longitude 52°21′24″W). Among six different tillage systems and crop rotations the greatest soil bulk density was measured for the continuous irrigated rice crop system and the lowest for the no-tillage treatment under rye grass straw. The CT method enabled the measurement of bulk density variations in the soil profile and indicated critical zones not observed by the volumetric ring method that measures only the mean sample soil bulk densities. A meaningful correlation between soil bulk densities measured by both methods was found, although the CT method presented more reliable results in comparison to the volumetric ring method. A 3% variation in bulk density was observed due to method intrinsic errors, probably also correlated to different samples sizes.     

Wheel traffic and tillage effects on runoff and crop yield

Traffic and tillage effects on runoff, soil water and crop production under rainfall were investigated over a period of 6 years on a heavy clay vertosols (vertisols) in Queensland, Australia. A split plot design was used to isolate traffic effects, while the cropping program and treatments were broadly representative of extensive grain production practice in the northern grain region of Australia. Treatments subject to zero tillage and stubble mulch tillage each comprised pairs of 90 m² plots, from which runoff was recorded. A 3 m wide controlled traffic system allowed one of each pair to be maintained as a non-wheeled plot, while the complete surface area of the other received a single annual wheeling treatment from a working 100 kW tractor.

Mean annual runoff from controlled traffic plots was 81 mm (36.3%) smaller than that from wheeled plots, while runoff from zero tillage was reduced by 31 mm (15.7%). Traffic and tillage effects appeared to be cumulative, so the mean annual runoff from controlled traffic and zero tillage plots, representing best practice, was 112 mm (47.2%) less than that from wheeled stubble mulch plots, representing conventional cropping practice. Rainfall infiltration into controlled traffic zero tillage soil was thus 12.0% greater than into wheeled stubble mulched soil. Rainfall/runoff hydrographs show that wheeling produced a large and consistent increase in runoff, whereas tillage produced a smaller increase. Treatment effects were greater on dry soil, but were still present in large and intense rainfall events on wet soil.

Plant available water capacity (PAWC) in the 0–500 mm zone increased by 10 mm (11.5%) and mean grain yields increased by 337 kg/ha (9.4%) in controlled traffic plots, compared with wheeled plots. Mean grain yield of zero tillage was 2–8% greater than that of stubble mulch plots for all crops except for winter wheat in 1994 and 1998. Increased infiltration and plant available water were probably responsible for increased mean grain yields of 497 kg/ha (14.5%) in controlled traffic zero tillage, compared with wheeled stubble mulch treatments. Dissipation of tractive and tillage energy in the soil is the apparent mechanism of deleterious effects on the soils ability to support productive cropping in this environment. Controlled traffic and conservation tillage farming systems appear to be a practicable solution.     

Effects of tillage method on soil physical properties, infiltration and yield in an olive orchard

The long-term effects of two different tillage systems, conventional (CT) and no tillage (NT), were studied in an olive orchard in Santaella (Southern Spain) for 15 years. In both tillage systems, two distinct zones developed in the orchard in relation to soil physical properties; one underneath the tree canopy, and the other in the rows between trees. Surface soil organic matter content, bulk density, cone index, macroscopic capillary length and hydraulic conductivity showed significant differences between tillage systems and positions. After 15 years, the NT treatment achieved greater bulk density and cone index values than CT. This compaction reduced the infiltration rate of NT soil with respect to CT, particularly in the rows between trees. Despite that reduction, the NT soil retained a moderate infiltration potential. That may be explained by the high infiltration rates and macroporosity of the zone beneath the tree, the temporary effects of tillage on infiltration and probably by the self-repair of soil structure in the Vertisol studied. Yield was not affected by tillage except in one year with very low precipitation, where NT significantly yielded more than CT. The reduction in infiltration in NT must have been compensated by unknown factors that improve the tree water supply in drought years.     

The effects of wheel-induced soil compaction on anchorage strength and resistance to root lodging of winter barley (Hordeum vulgare L.)

Lodging is the permanent displacement of cereal stems from the vertical. Cereal plants growing in the edge rows next to both wheel tracks (‘tramlines’) and the gaps between experimental plots (‘inter-plot spaces’), which are traversed by farm vehicles during planting operations and agrochemical application, are less prone to lodge than plants growing elsewhere in fields and plots. Previous research has attributed this phenomenon to an increase in the stem strength of edge row plants, and hence their resistance to stem lodging, resulting from reduced competition between edge row plants for resources. However, this explanation gives no consideration to the anchorage strength of edge row plants, and hence their resistance to root lodging. Differences in soil and plant characteristics between the edge and centre rows of plots of winter barley (Hordeum vulgare L.) were examined on sand, silt and clay dominated soil types. Edge rows next to tramlines were investigated on the silt and clay soil types, whereas edge rows next to inter-plot spaces were investigated on the sand soil type. Edge row plants next to both tramlines and inter-plot spaces had 58.8% greater anchorage strength and hence resistance to root lodging than centre row plants. This was attributed to (1) greater soil compaction in the edge rows resulting from wheel traffic in the tramlines and inter-plot spaces, which increased the strength of the soil matrix surrounding the roots, and (2) greater plant root growth in the edge rows resulting from reduced competition. Bulk density, root plate spread and structural rooting depth were 19, 22, and 12% greater, respectively, in the edge rows of all soil types. The results suggest that in order to reduce lodging risk, energies should be directed towards identifying agricultural practices that optimise soil compaction in the seedbed without causing significant limitations to root growth.     

Effect of different tillage systems on soil properties and wheat yield in Middle Anatolia

Field experiments were conducted on a clay soil in entisol to determine the effect of different tillage tools on soil properties, emergence rate index and yield of wheat in Middle Anatolia. There were four different tillage treatments: mouldboard ploughing followed by disc harrowing twice; rotary tillage twice; stubble cultivator followed by a disc harrowing; heavy globe disc twice. The smallest aggregate mean weight diameters and surface roughness were produced by rotary tillage. Decreasing mean weight diameter decreased the surface roughness. There was a significant (P < 0.01) effect of the four different tillage systems on moisture content, bulk density, penetration resistance, aggregate mean weight diameter and surface roughness. Tillage systems had a significant effect on emergence rate and yield of wheat. Emergence rate index and yield of wheat varied from 15.24 to 18.88 and from 3065 kg ha⁻¹ to 4265 kg ha⁻¹, respectively. The greatest emergence rate index and yield were obtained with stubble cultivator followed by disc harrowing treatment.     

Long-term tillage effects on soil quality

Public interest in soil quality is increasing, but assessment is difficult because soil quality evaluations are often purpose- and site-specific. Our objective was to use a systems engineering methodology to evaluate soil quality with data collected following a long-term tillage study on continuous corn (Zea mays L.). Aggregate characteristics, penetration resistance, bulk density, volumetric water content, earthworm populations, respiration, microbial biomass, ergosterol concentrations, and several soil-test parameters (pH, P, K, Ca, Mg, Total-N, Total-C, NH₄-N, and NO₃-N) were measured on Orthic Luvisol soil samples collected from Rozetta and Palsgrove silt loam (fine-silty, mixed, mesic Typic Hapludalfs) soils. Plots managed using no-till practices for 12 years before samples were collected for this study had surface soil aggregates that were more stable in water and had higher total carbon, microbial activity, ergosterol concentrations, and earthworm populations than either the chisel or plow treatments. Selected parameters were combined in the proposed soil quality index and gave ratings of 0.48, 0.49, or 0.68 for plow, chisel, or no-till treatments, respectively. This indicated that long-term no-till management had improved soil quality. The prediction was supported by using a sprinkler infiltration study to measure the amount of soil loss from plots that had been managed using no-till or mold-board plow tillage. We conclude that no-till practices on these soils can improve soil quality and that the systems engineering methodology may be useful for developing a more comprehensive soil quality index that includes factors such as pesticide and leaching potentials.     

Impacts of periodic tillage on soil C stocks: A synthesis

Long-term loss of soil C stocks under conventional tillage and accrual of soil C following adoption of no-tillage have been well documented. No-tillage use is spreading, but it is common to occasionally till within a no-till regime or to regularly alternate between till and no-till practices within a rotation of different crops. Short-term studies indicate that substantial amounts of C can be lost from the soil immediately following a tillage event, but there are few field studies that have investigated the impact of infrequent tillage on soil C stocks. How much of the C sequestered under no-tillage is likely to be lost if the soil is tilled? What are the longer-term impacts of continued infrequent no-tillage? If producers are to be compensated for sequestering C in soil following adoption of conservation tillage practices, the impacts of infrequent tillage need to be quantified. A few studies have examined the short-term impacts of tillage on soil C and several have investigated the impacts of adoption of continuous no-tillage. We present: (1) results from a modeling study carried out to address these questions more broadly than the published literature allows, (2) a review of the literature examining the short-term impacts of tillage on soil C, (3) a review of published studies on the physical impacts of tillage and (4) a synthesis of these components to assess how infrequent tillage impacts soil C stocks and how changes in tillage frequency could impact soil C stocks and C sequestration. Results indicate that soil C declines significantly following even one tillage event (1–11% of soil C lost). Longer-term losses increase as frequency of tillage increases. Model analyses indicate that cultivating and ripping are less disruptive than moldboard plowing, and soil C for those treatments average just 6% less than continuous NT compared to 27% less for CT. Most (80%) of the soil C gains of NT can be realized with NT coupled with biannual cultivating or ripping.     

The effect of tillage direction on soil redistribution by mouldboard ploughing on complex slopes

Seven mouldboard ploughing experiments were conducted to systematically investigate the effect of different tillage directions on soil redistribution on hillslopes. The present study included tillage directions other than parallel to the gradient or along the contour, that is, in our experiments the slope gradient changed simultaneously in tillage and in turning direction. Using physical tracers we developed a model of the two-dimensional tracer displacement as a function of topography and tillage variables. The displacements in tillage and in turning direction were separately described as 2nd degree polynomials in both tillage and in turning directions. This model fully accounted for the directionality of tillage. Displacement in turning direction additionally depended on tillage depth, while that in tillage direction was affected by tillage speed and soil bulk density. We found a large effect of tillage directionality on soil redistribution, and tillage at 45° to the gradient turning soil upslope was the least erosive tillage direction. We obtained non-linear relationships between soil redistribution and profile curvature, instead of the linear relationships reported previously. Consequently tillage erosivity varied in tillage direction and a unique tillage transport coefficient could not be obtained for all tillage directions.     

Water retention and hydraulic conductivity of a loamy sand soil as influenced by crop rotation and fertilization

Measurements are reported of soil organic carbon content, dry bulk density, water retention characteristics, and saturated hydraulic conductivity of a sandy loam soil with two different crop rotations and two levels of fertilization. The water retention characteristics were fitted to the van Genuchten equation. Values of unsaturated hydraulic conductivity were estimated by calculation. It was found that crop rotation has much larger effects on these soil physical properties than fertilization. Water retention and hydraulic conductivity are greater when mustard, and clover with grass are included in the crop rotation, but only at water contents greater than 0,10 and 0, 13 kg kg^?1respectívely.     

Prediction of the soil structures produced by tillage

Data are presented for the amount of clods >50 mm produced when five different soils were tilled at a range of different, naturally occurring water contents. The optimum water content for soil tillage is defined as that at which the amount of clods produced is minimum. The amount clods produced at this optimum water content is shown to be linearly and negatively correlated with the value of Dexter's index S of soil physical quality. This results in a rational model for soil tillage that enables predictions to be made for all different soils and conditions. Pedo-transfer functions can be used to estimate the input parameters for the model for cases, for which measured values are not available. It is concluded that for soils with good physical condition (i.e. S > 0.035), no clods >50 mm are produced during tillage.     

Nitrate leaching as influenced by soil tillage and catch crop

Because of public and political concern for the quality of surface and ground water, leaching of nitrate is of special concern in many countries. To evaluate the effects of tillage and growth of a catch crop on nitrate leaching, two field trials were conducted in spring barley (Hordeum vulgare L.) under temperate coastal climate conditions. On a coarse sand (1987–1992), ploughing in autumn or in spring in combination with perennial ryegrass (Lolium perenne L.) as a catch crop was evaluated. Furthermore, rotovating and direct drilling were included. The experiment was conducted on a 19-year-old field trial with continuous production of spring barley. On a sandy loam (1988–1992), ploughing in autumn or in spring in combination with stubble cultivation and perennial ryegrass, in addition to minimum tillage, was evaluated in a newly established field trial. For calculation of nitrate leaching, soil water isolates from depths of 0.8 or 1.0 m were taken using ceramic cups. No significant effect of tillage was found on the coarse sand; however, a significant effect of tillage was found on the sandy loam, where leaching from autumn ploughed plots without stubble cultivation was 16 kg N ha⁻¹ year⁻¹ higher than leaching from spring ploughed plots. Leaching was significantly less when stubble cultivation in autumn was omitted. Leaching on both soil types was significantly reduced by the growth of a catch crop which was ploughed under in autumn or in spring. It was concluded that soil cultivation increased leaching on the sandy loam but not on the coarse sand, and that the growth of perennial ryegrass as a catch crop reduced leaching on both soil types, particularly when ryegrass was ploughed under in spring.     

Effects of tillage depth on organic carbon content and physical properties in five Swedish soils

The soil tillage system affects incorporation of crop residues and may influence organic matter dynamics. A study was carried out in five 15–20 year old tillage experiments on soils with a clay content ranging from 72 to 521 g kg⁻¹. The main objective was to quantify the influence of tillage depth on total content of soil organic carbon and its distribution by depth. Some soil physical properties were also determined. The experiments were part of a series of field experiments all over Sweden with the objective of producing a basis to advise farmers on optimal depths and methods of primary tillage under various conditions. Before the experimental period, all sites had been mouldboard ploughed annually for many years to a depth of 23–25 cm. Treatments included primary tillage to 24–29 cm depth by mouldboard plough (deep tillage) and to 12–15 cm by field cultivator or mouldboard plough (shallow tillage). Dry bulk density, degree of compactness and penetration resistance profiles clearly reflected the depth of primary tillage and substantially increased below that depth. Compared to deep tillage, shallow tillage increased the concentration of organic carbon in the surface layer but decreased it in deeper layers. Total quantity of soil organic carbon and carbon–nitrogen ratio were unaffected by the tillage depth. Thus, a reduction of the tillage depth from about 25 cm to half of that depth would appear to have no significant effect on the global carbon cycle.     

Effect of different tillage systems on the quality and crop productivity of a clay–loam soil in semi-arid north-western Turkey

A 2-year study was conducted to investigate the effect of three tillage systems on the properties of clay–loam soil (EutricVertisol) planted with winter wheat (Triticum aestivum L.) in the Canakkale province of north-western Turkey. Crop productivity was also evaluated. The three tillage treatments were: (1) conventional tillage involving mouldboard ploughing followed by two discings (MT); (2) shallow tillage consisting of rototilling followed by one discing (RT); (3) double discing (DD). In the first year of the study, bulk density (BD) was found significantly lower under RT at both 0–10 and 10–20 cm depths with 1.24 and 1.32 Mg cm⁻³, respectively, when compared to MT treatment. However, MT at 20–30 cm provided the highest BD, at 1.49 Mg cm⁻³. In the second year of the study, DD had the lowest BD at all depths followed by RT and MT. Based on the 2-year mean, aggregate size distribution (ASD) and mean weight diameter (MWD) were significantly influenced by tillage treatments. The greatest MWD was obtained with DD, followed by MT and RT. Increasing MWD and coarse aggregates decreased seedling emergence. Organic carbon increased after RT, DD, and MT by 58%, 30%, and 18%, respectively, when compared to the amount at the beginning of the study. Similarly, the total N in the soil and straw was higher after RT than the other treatments. At 1.76 MPa, penetration resistance at 18–30 cm was significantly higher during the growing period using DD, followed by RT with 1.35 MPa and MT with 1.33 MPa. There was no significant difference between treatments at 0–18 cm. Increasing OC and total N and decreasing BD and PR under RT increased grain yield to 4611 kg ha⁻¹, followed by MT and DD at 4375 and 4163 kg ha⁻¹, respectively, according to the 2-year mean.     

黄土高原旱地土壤质量评价指标研究

基于设置在陇中黄土高原半干旱区的长期定位试验,运用综合评价模型,定量评价了小麦→豌豆双序列轮作系统6种不同耕作方式对土壤质量的影响。结果表明,采用加权综合法和加乘法则对土壤质量进行综合评价,能够较好地反映土壤质量的实际情况,敏感地反映耕作方式对土壤质量的影响。运用逐步判别分析法对6种不同耕作方式[传统耕作(T)、免耕作(NT)、传统耕作秸秆还田(TS)、免耕秸秆覆盖(NTS)、传统耕作地膜覆盖(TP)、免耕地膜覆盖(NTP)]下29项土壤属性指标进行筛选,建立了包括团粒结构、全氮、速效氮、有机质、蔗糖酶活性、作物产量、种植纯收益和产投比8项因子的简化评价指标体系。原始评价指标体系下2种轮作序列土壤质量指数排序均为NTSTSNTPNTTPT;简化评价指标体系下豌豆→小麦轮作序列土壤质量指数排序为NTSTSNTPNTTTP,而小麦→豌豆轮作序列土壤质量指数排序为NTSTSNTNTPTTP。进一步相关分析和方差分析表明,应用逐步判别分析法建立的简化指标体系具有较高的代表性,可适用于黄土高原半干旱区土壤质量评价。     

Long-term tillage system effects under moist cool conditions in Switzerland

How do different soil tillage systems influence soil quality over the years? Under moist cool conditions is it possible in the long term to reduce dramatically soil tillage intensity without experiencing reductions in yield or other problems? In 1987, the Swiss Federal Research Station for Agricultural Economics and Engineering in Tänikon initiated a long-term soil tillage trial to clarify these questions. The trial compared mouldboard plough, chisel, paraplow, shallow tillage and no-tillage systems on a well-drained Orthic Luvisol with 160 g kg⁻¹ clay, 310 g kg⁻¹ silt, and under a climate that has a mean annual precipitation of 1180 mm. The tillage treatment effects were evaluated by measuring several biological, chemical, and physical soil quality indicators. Reduced soil tillage increased earthworm populations, reduced Pseudocercosporella herpotrichoides infection in wheat (Triticum aestivum) and increased plant colonisation by arbuscular mycorrhizal fungi. Yields for no-tillage and other ploughless cultivation techniques were on par with those obtained by ploughing. An exception was direct-drilled maize (Zea mays), where no-tillage decreased yield by more than 10% over the course of 14 years. In the first 7 years of the trial, the level of soil organic carbon in all the tillage regimes was approximately 40% lower than natural grassland (initial situation 1987=75 Mg SOC ha⁻¹). The no-tillage method did not differ from the others in respect of bulk density, but it showed an increased preconsolidation stress and hence better trafficability. Under Switzerland’s moist cool climatic conditions, it is possible to reduce soil tillage intensity without substantial reductions in yield, and at the same time improve soil quality.     

农田土壤机械压实研究进展与展望

土壤机械压实是威胁全球农业可持续发展的重要因素之一。从农田土壤压实的检测、危害、缓解和预防四个方面系统介绍当前国内外土壤压实的最新研究进展与不足。指出检测方法的创新和突破是实现田间尺度下压实土壤空间分布检测的关键;压实土壤危害的研究多集中在耕层土壤,但忽视了深层土壤压实危害及其在应对气候变化中可发挥的生态服务功能;提倡采用轮作轮耕等合理田间管理措施缓解压实土壤;深层土壤压实具有存在时间久和恢复难度大的特征,因此重点应以预防为主,但当前对土壤压实预防重视不足且预防技术体系尚不成熟。鉴于我国农业机械化正处在快速发展期,采取有效预防措施是避免重蹈发达国家土壤压实退化的有效手段。