Quantitative trait loci for agronomic traits in soybean

There continues to be improvement in seed yields of soybean by conventional breeding, but molecular techniques may provide faster genetic gains. The objective of this study was to identify quantitative trait loci (QTL) associated with the agronomic traits seed yield, lodging, plant height, seed filling period and plant maturity in soybean. To achieve this objective, 101 F₆‐derived recombinant inbred lines (RIL) from a population developed from a cross of N87‐984‐16 × TN93‐99 were used. Experiments were conducted in six environments during 2002–2003. Heritability estimates on an entry mean basis from data combined across environments ranged from 0.12 to 0.65 for seed yield and seed filling period, respectively. Composite interval mapping detected one QTL for yield (near Satt076), two for lodging (near Satt225 and Satt593) and four for maturity (near Satt263, Satt292, Satt293 and Satt591) in this population. Additional environmentally sensitive QTL for these traits, and for seed filling period and plant height are also reported. The QTL associated with agronomic traits that we report and the recently released germplasm (PI 636460) from this population may be useful in soybean breeding programmes.     

Identification of quantitative trait loci associated with boiled seed hardness in soybean

Boiled seed hardness is an important factor in the processing of soybean food products such as nimame and natto. Little information is available on the genetic basis for boiled seed hardness, despite the wide variation in this trait. DNA markers linked to the gene controlling this trait should be useful in soybean breeding programs because of the difficulty of its evaluation. In this report, quantitative trait locus (QTL) analysis was performed to reveal the genetic factors associated with boiled seed hardness using a recombinant inbred line population developed from a cross between two Japanese cultivars, ‘Natto-shoryu’ and ‘Hyoukei-kuro 3’, which differ largely in boiled seed hardness, which in ‘Natto-shoryu’ is about twice that of ‘Hyoukei-kuro 3’. Two significantly stable QTLs, qHbs3-1 and qHbs6-1, were identified on chromosomes 3 and 6, for which the ‘Hyoukei-kuro 3’ alleles contribute to decrease boiled seed hardness for both QTLs. qHbs3-1 also showed significant effects in progeny of a residual heterozygous line and in a different segregating population. Given its substantial effect on boiled seed hardness, SSR markers closely linked to qHbs3-1, such as BARCSOYSSR_03_0165 and BARCSOYSSR_03_0185, could be useful for marker-assisted selection in soybean breeding.     

Quantitative trait loci analysis of soluble sugar contents in soybean

The soluble sugar content in soybean seeds, mainly sucrose, stachyose, raffinose and trace amounts of glucose and fructose, is important for the increasing global market demand for various soyfoods including tofu, soymilk, natto, bean sprouts and edamame due to their nutritional value and health benefits. The objective of this study was to conduct quantitative trait loci (QTL) analysis and identify molecular markers for soluble sugar content in soybean seeds for marker‐assisted selection (MAS) in soybean breeding. The content of the five previously mentioned sugars were measured and associated QTLs were mapped based on a F₂ population that was derived from a cross between V97‐3000 and V99‐5089. Eleven QTLs were detected for the five sugar contents: one for glucose, three each for fructose and sucrose, and two each for raffinose and stachyose. However, only one QTL for sucrose, one QTL for raffinose, and two QTLs for stachyose were identified with LOD > 3.0 and R² > 10% from this research. The QTL on chromosome 11 [linkage group (LG) B1] was identified as associated with sucrose, raffinose and stachyose in the same region as previously reported for sucrose and stachyose. The SSR marker, Satt359, on the QTL B1 region had an significant association with sucrose (LOD = 5.192; R² = 0.134), raffinose (LOD = 3.95; R² = 0.104), and stachyose (LOD = 13.572; R² = 0.314); therefore it can be used to assist breeding selection for sucrose, raffinose and stachyose contents simultaneously.     

Quantitative trait loci mapping for flooding tolerance at an early growth stage of soybean recombinant inbred line population

Flooding stress causes a significant yield reduction in soybean. The early growth of soybean in Korea coincides with the rainy season, potentially exposing to flooding stress. Greenhouse experiments were conducted to map the quantitative trait loci (QTL) for flooding tolerance in soybean and to identify and investigate candidate genes near the QTL hot spots. Flood stress was imposed at V1–V2 stage on a recombinant inbred line population (‘Paldalkong’ × ‘NTS1116’), and leaf chlorophyll content (CC) and shoot dry weight (DW) were measured under control and flooded conditions. The genetic map was constructed using 180K Axiom^® SoyaSNP markers. The QTL were analysed under control and flooded conditions as well as for index (ratio of CC or DW under flooded to control, CCI and DWI) and flooding tolerance index (FTI, mean of CCI and DWI). A total of 20 QTL with LOD scores 3.59–19.73 causing 5.8%–33.3% phenotypic variation were identified on nine chromosomes. Chromosomes 10, 12 and 13 harboured relatively more stable QTL. Results of this study could be useful to further understand the genetic basis of soybean's flooding tolerance and applied in breeding programmes.     

Dynamic quantitative trait loci underlies isoflavone accumulation in soybean seed

Most of quantitative trait loci (QTL) underlying soybean seed isoflavone contents were derived from the harvest stage of plant development, which uncover the genetic effects that were expressed in earlier seed developmental stages. The aim of this study was to detect conditional QTL associated with isoflavone accumulation during the entire seed development. A total of 112 recombinant inbred lines developed from the cross between ‘Zhongdou 27’ (higher seed isoflavone content) and ‘Jiunong 20’ (lower seed isoflavone content) were used for the conditional QTL analysis of daidzein (DZ), genistein (GT), glycitein (GC) and total isoflavone (TI) accumulations through composite interval mapping with mixed genetic model. The results indicated that the number and type of QTL and their additive effects for individual and total isoflavone accumulations were different among R3 to R8 developmental stages. Three unconditional QTL and six conditional QTL for DZ, four unconditional QTL and five conditional QTL for GT, six unconditional QTL and five conditional QTL for GC, six unconditional QTL and seven conditional QTL for TI were identified at different developmental stages, respectively. Unconditional and conditional QTL that affect individual and total isoflavone accumulations exhibited multiple expression patterns, implying that some QTL are active for long period and others are transient. Two genomic regions, Satt144‐Satt569 in linkage group F (LG F; chromosome 13, chr 13) for DZ, GC, GT and TI accumulations and Satt540‐Sat_240 in LG M (chr 07) for TI and GC accumulations, were found to significantly affect individual and total isoflavone accumulations in multiple developmental stages, suggesting that the accumulation of soybean seed isoflavones is governed by time‐dependent gene expression.     

Quantitative trait loci for quality and agronomic traits in two advanced backcross populations in oat (Avena sativa L.)

Using the advanced backcross quantitative trait loci (AB‐QTL) strategy, we successfully transferred and mapped valuable allelic variants from the high β‐glucan (BG) accession IAH611 (PI 502955), into the genome of cultivar ‘Iltis’. By backcrossing one BC₁F₁ plant to ‘Iltis’, we developed two BC₂F_2‐6 populations A and B, comprising 98 and 72 F₂‐individuals, respectively. Genotyping of BC₂F₂ individuals with predominantly AFLP markers resulted in 12 linkage groups with a map size of 455.4 cM for Population A and 11 linkage groups with a map size of 313.5 cM for Population B. Both populations were grown at three sites in Germany over a three‐year period. Individuals were then phenotyped for 13 traits including grain yield (YD) and β‐glucan content (BG). QTL analysis via stepwise regression detected a total of 33 QTLs, most of which were clustered in three linkage groups. Two dense linkage groups A1 and B13 were found to be putatively homologous to groups KO_6 and KO_11 of the ‘Kanota’/‘Ogle’ map, respectively.     

Quantitative trait loci for grain-quality traits across a rice F2 population and backcross inbred lines

Improving grain-quality is an important goal in rice breeding programs. One vital step is to find major quantitative trait loci (QTLs) for quality related traits and then investigate the relationships among them. We crossed ‘N22’, an indica variety with good appearance but low grain weight, to a japonica variety, ‘Nanjing35’, with superior grain yield but poor appearance. This enabled us to construct an F₂ population and a set of backcross inbred lines (BILs) for QTL-mapping for the traits related grain appearance. In all, 37 QTLs were identified for grain length (GL), grain width (GW), grain thickness (GT), thousand-grain weight (TGW), and the percentage of grains with chalkiness (PGWC). Of these, 17 QTLs detected from 184 plants in the F₂ population explained 4.97–27.26 % of the phenotypic variance, another 20 QTLs were identified using BILs from 2009 to 2010. Quantitative trait loci for major effects were detected in different populations and across years. A new QTL hot spot (marker interval RM504–RM520) was found on Chromosome 3, which harbored QTLs for GL, GW, GT, and TGW. Among our five examined traits, grain shape was significantly correlated with TGW and PGWC. The PGWC values of two heavier grains BILs, L93, and L145 are much lower than Nanjiing35, the analysis of genotype showed that this greater weight may due to the locus for GL occurring within RM504–RM520 on Chromosome 3. Therefore, those two lines will allow us to develop a long-grain high-yield rice variety with less chalkiness.     

Quantitative trait loci mapping of forage agronomic traits in six mapping populations derived from European elite maize germplasm

Four agronomic traits were analysed including dry matter concentration (DMC) and dry matter yield (DMY) for stover, plant height (PHT) and days from planting to silking (DPS). We mapped quantitative trait loci (QTL) in three populations with doubled haploid lines (DHL), one RIL population and two testcross (TC) populations derived from crosses between two of the four populations mentioned above to elite tester lines, based on field phenotyping at multiple locations and years for each; 146–168 SSRs were used for genotyping of the four mapping populations. Significant high phenotypic and genotypic correlations were found for all traits at two locations, while DMC was negatively correlated with the other traits. A total of 42, 41, 54, and 45 QTL were identified for DMC, DMY, PHT, and DPS, respectively, with 9, 7, 12, and 7 major QTL for each trait. Most detected QTL displayed significant interactions with environment. Major QTL detected in more than two populations will contribute to marker‐assisted breeding and also to fine mapping candidate genes associated with maize agronomic traits.     

Mapping major genes and quantitative trait loci controlling agronomic traits in almond

Six tree traits (self-compatibility, blooming date, blooming density, productivity, leafing date and ripening time) and five pomological traits (kernel taste, in-shell weight, shell hardness, kernel weight and double kernel) were studied in an F₁ almond progeny of 167 seedlings from the cross between the French cultivar 'R1000' and the Spanish cultivar 'Desmayo Largueta'. In addition, a set of 135 codominant microsatellites or simple-sequence repeat (SSR) markers developed from peach, cherry and almond were used for the molecular characterization of the progeny. A genetic linkage map was constructed with 56 of these SSRs. Cosegregation analysis allowed the identification of the map positions of two major genes to be confirmed for kernel taste ( Sk ) in linkage group five (G5) and for self-incompatibility ( S ) in G6. QTLs mapped include two for leafing date ( Lf-Q1 and Lf-Q2 ) in G1 and G4, one for shell hardness ( D-Q ) in G2, one each for double kernel ( Dk-Q ) and productivity ( P-Q ) in G4, one for blooming date ( Lb-Q ) in G4, two for kernel weight ( Kw-Q1 and Kw-Q2 ) in G1 and G4, and two for in-shell weight ( Shw-Q1 and Shw-Q2 ) in G1 and G2. Four SSR loci (BPPCT011, UDP96-013, UDP96-003 and PceGA025) were linked to the important agronomic traits of leafing date, shell hardness, blooming date and kernel taste. Finally, the development of efficient marker-assisted selection strategies applied to almond and other Prunus breeding programmes was also discussed.     

Quantitative trait loci mapping for biomass yield traits in a Lolium inbred line derived F2 population

Lolium perenne L. (perennial ryegrass) is the principle forage grass species in temperate agriculture. Improving biomass yield still remains one of the most important aims of current forage breeding programmes. A quantitative trait locus (QTL) study investigating biomass yield traits in perennial ryegrass was carried out in greenhouse and field environments. The study is based on an F₂ population consisting of 360 individuals derived from two inbred grandparents where the F₁ has a large biomass yield phenotype. For both experimental environments co-localized QTL for biomass yield traits including fresh and dry weight and dry matter were identified on linkage groups 2, 3 and 7. A major QTL for fresh and dry weight was identified on LG 3 which explained around 30% of the phenotypic variance in the field experiment. The findings of this study are discussed with regard for their potential in research and breeding.     

Molecular mapping of quantitative trait loci for field resistance to Fusarium head blight in a European winter wheat population

Fusarium head blight (FHB), one of the most destructive diseases of wheat in many parts of the world, can reduce the grain quality due to mycotoxin contamination up to rejection for usage as food or feed. Objective of this study was to map quantitative trait loci (QTL) associated with FHB resistance in the winter wheat population ‘G16‐92’ (resistant)/‘Hussar’. In all, 136 recombinant inbred lines were evaluated in field trials in 2001 and 2002 after spray inoculation with a Fusarium culmorum suspension. The area under disease progress curve was calculated based on the visually scored FHB symptoms. For means across all environments two FHB resistance QTL located on chromosomes 1A, and 2BL were identified. The individual QTL explained 9.7% and 14.1% of the phenotypic variance and together 26.7% of the genetic variance. The resistance QTL on 1A coincided with a QTL for plant height in contrast to the resistance QTL on 2BL that appeared to be independently inherited from morphological characteristics like plant height and ear compactness. Therefore, especially the QTL on 2BL could be of great interest for breeding towards FHB resistance.     

Quantitative analysis and QTL mapping for agronomic and fiber traits in an RI population of upland cotton

Genetic mapping is an essential tool for cotton (Gossypium hirsutum L.) molecular breeding and application of DNA markers for cotton improvement. In this present study, we evaluated an RI population including 188 RI lines developed from 94 F₂-derived families and their two parental lines, ‘HS 46’ and ‘MARCABUCAG8US-1-88’, at Mississippi State, MS, for two years. Fourteen agronomic and fiber traits were measured. One hundred forty one (141) polymorphic SSR markers were screened for this population and 125 markers were used to construct a linkage map. Twenty six linkage groups were constructed, covering 125 SSR loci and 965 cM of overall map distance. Twenty four linkage groups (115 SSR loci) were assigned to specific chromosomes. Quantitative genetic analysis showed that the genotypic effects accounted for more than 20% of the phenotypic variation for all traits except fiber perimeter (18%). Fifty six QTLs (LOD > 3.0) associated with 14 agronomic and fiber traits were located on 17 chromosomes. One QTL associated with fiber elongation was located on linkage group LGU01. Nine chromosomes in sub-A genome harbored 27 QTLs with 10 associated with agronomic traits and 17 with fiber traits. Eight chromosomes in D sub-genome harbored 29 QTLs with 13 associated with agronomic traits and 16 with fiber traits. Chromosomes 3, 5, 12, 13, 14, 16, 20, and 26 harbor important QTLs for both yield and fiber quality compared to other chromosomes. Since this RI population was developed from an intraspecific cross within upland cotton, these QTLs should be useful for marker assisted selection for improving breeding efficiency in cotton line development. Paper number J1116 of the Mississippi Agricultural and Forestry Experiment Station, Mississippi State University, Mississippi State, MS 39762. Mention of trademark, proprietary product, or vendor does not constitute a guarantee or warranty of the product by USDA, ARS and does not imply its approval to the exclusion of other products or vendors that may also be suitable.     

Identification and confirmation of quantitative trait loci for stachyose content in soybean seed

Stachyose is an unfavorable sugar in soybean meal that causes flatulence for non‐ruminant animals. Understanding the genetic control of stachyose in soybean will facilitate the modification of stachyose content at the molecular level. The objective of this study was to identify quantitative trait loci (QTL) associated with seed stachyose content using simple sequence repeat (SSR) and single nucleotide polymorphism (SNP) markers. A normal stachyose cultivar, ‘Osage’, was crossed with a low stachyose line, V99‐5089, to develop a QTL mapping population. Two parents were screened with 33 SSR and 37 SNP markers randomly distributed on chromosome 10, and 20 SSR and 19 SNP markers surrounding a previously reported stachyose QTL region on chromosome 11. Of these, 5 SSR and 16 SNP markers were used to screen the F_3:4 lines derived from ‘Osage’ x V99‐5089. Seed samples from F_3:5 and F_3:6 lines were analyzed for stachyose content using high‐performance liquid chromatography (HPLC). Composite interval mapping analysis indicated that two stachyose QTL were mapped to chromosome 10 and 11, explaining 11% and 79% of phenotypic variation for stachyose content, respectively. The SSR/SNP markers linked to stachyose QTL could be used in breeding soybean lines with desired stachyose contents. Chi‐square tests further indicated that these two QTL probably represent two independent genes for stachyose content. Therefore, a major QTL was confirmed on chromosome 11 and a novel QTL was found on chromosome 10 for stachyose content.     

Quantitative trait loci analysis of stem strength and related traits in soybean

Stem strength is one of the major influencing factors of lodging in soybean [Glycine max (L.) Merr.] as well as other crops. To identify quantitative trait loci (QTL) associated with stem strength and related traits in soybean, a recombinant inbred line (RIL) population consisting of 165 lines derived from Zhongdou No. 29 × Zhongdou No. 32 was used in 3 years. Significant positive correlations were found among the four traits (stem strength, stem diameter, number of nodes, root dry weight). A linkage map spanning 1,240.7 cM was constructed using 245 SSR (simple sequence repeat) markers and a phenotypic marker (leaflet shape). By composite interval mapping and two-round strategy of QTL meta-analysis, 32 consensus QTL and 19 unique QTL were identified, respectively. Of eight pleiotropic unique QTL, two QTL (uq.A2-2 and uq.A2-3) located at the intervals of 23.2–26.8 and 38.5–42.4 cM on linkage group A2, respectively, were associated with all the four traits. Additive × environment (ae) interaction effects, epistasis (aa) and epistasis × environment (aae) interaction effects of QTL were detected as well. The results provide useful information for further genetic studies on stem strength of soybean.     

Mapping quantitative trait loci for yield-related traits in soybean (Glycine max L.)

Development of soybean cultivars with high seed yield is a major focus in soybean breeding programs. This study was conducted to identify genetic loci associated with seed yield-related traits in soybean and also to clarify consistency of the detected QTLs with QTLs found by previous researchers. A population of 135 F_2:3 lines was developed from a cross between a vegetable soybean line (MJ0004-6) and a landrace cultivar from Myanmar ({"type":"entrez-nucleotide","attrs":{"text":"R18500","term_id":"772110","term_text":"R18500"}}R18500). They were evaluated in the experimental field of Kasetsart University, Kamphaeng Saen, Nakhon Pathom, Thailand in a randomized complete block design with two replications each in 2011 and 2012 growing seasons. The two parents exhibited contrasting characteristics for most of the traits that were mapped. Analysis of variance showed that the main effects of genotype and environment (year) were significant for all studied traits. Genotype by environment interaction was also highly significant for all the traits. The population was genotyped by 149 polymorphic SSR markers and the genetic map consisted of 129 SSR loci which converged into 38 linkage groups covering 1156 cM of soybean genome. There were 10 QTLs significantly associated with seed yield-related traits across two seasons with single QTLs explaining between 5.0% to 21.9% of the phenotypic variation. Three of these QTLs were detected in both years for days to flowering, days to maturity and 100 seed weight. Most of the detected QTLs in our research were consistent with earlier QTLs reported by previous researchers. However, four novel QTLs including SF1, SF2 and SF3 on linkage groups L and N for seed filling period and PN1 on linkage group D1b for pod number were identified in the present study.     

Quantitative trait locus analysis for soybean (Glycine max) seed protein and oil concentrations using selected breeding populations

Soybean seed protein and oil concentrations are important traits that directly affect the quality of soyfoods. Many studies and breeding programmes have been conducted to find major quantitative trait loci (QTL) that regulate protein and oil concentrations and to develop soybean cultivars with high protein and/or oil content. The purpose of this study was to identify these QTL using a selected breeding population. The population was tested in field conditions over a period of 3 years. Seed protein and oil concentrations were measured each year. Single‐nucleotide polymorphisms (SNPs) were used to construct genetic map using a 180K SoyaSNP array, which identified 1,570 SNPs. We identified 12 QTL for seed protein, 11 for seed oil concentration and four for both traits. Among these, 17 QTL were closely mapped to previously reported QTL, whereas ten sites were novel. Several QTL were detected across at least two experimental years. These loci are good candidate QTL for optimal seed protein and oil concentrations. Our results demonstrate that favourable target QTL can be successfully identified using selected breeding populations.     

Identification of quantitative trait loci (QTLs) for seed protein concentration in soybean and analysis for additive effects and epistatic effects of QTLs under multiple environments

Soybean protein concentration is a key trait driver of successful soybean quality. A recombination inbred lines derived from a cross between ‘Charleston’ and ‘Dongnong594’, were planted in three environments across four years in China. Then, the genetic effects were partitioned into additive main effects, epistatic main effects and their environment interaction effects by using composite interval mapping, multiple interval mapping and composite interval mapping in a mixed linear model. Forty‐three quantitative trait loci QTLs were identified on 17 of 20 soybean chromosomes excluding Ch 7, Ch 8 and Ch 17. Two QTLs showed a good stability across multiple environments, qPRO20‐1 was detected under four environments, which explained 4.4–9.95% phenotypic variances and the allele was from ‘Charleston’ among four environments. qPRO7‐5 was detected under three environments, which explained 7.2–14.5% phenotypic variances and the allele was from ‘Dongnong 594’, three pathway genes of protein biosynthesis were detected in the interval of qPRO7‐5. The additive main‐effect QTLs contributed more phenotypic variation than the epistasis and environmental interaction. This indicated that it is feasible by marker‐assisted selection to improve soybean protein concentration.     

Identification and validation of quantitative trait loci associated with seed yield in soybean

In soybean [Glycine max (L.) Merrill], the genetic analysis of seed yield is important to aid in the breeding of high-yielding cultivars. Seed yield is a complex trait, and the number of quantitative trait loci (QTL) involved in seed yield is high. The aims of this study were to identify QTL associated with seed yield and validate their effects on seed yield using near-isogenic lines. The QTL analysis was conducted using a recombinant inbred line population derived from a cross between Japanese cultivars ‘Toyoharuka’ and ‘Toyomusume’, and eight seed yield-associated QTL were identified. There were significant positive correlations between seed yield and the number of favorable alleles at QTL associated with seed yield in the recombinant inbred lines for three years. The effects of qSY8-1, a QTL promoting greater seed yield, was validated in the Toyoharuka background. In a two-year yield trial, the 100-seed weight and seed yield of Toyoharuka-NIL, the near-isogenic line having the Toyomusume allele at qSY8-1, were significantly greater than those of Toyoharuka (106% and 107%, respectively) without any change for days to flowering and maturity. Our results suggest that qSY8-1 was not associated with maturity genes, and contributed to the 100-seed weight.     

水稻光合作用及相关生理性状的QTL定位研究进展

光合作用及相关生理性状均属于数量性状,由多基因控制。本文介绍了水稻光合相关性状与光合作用的关系,重点综述了水稻光合作用及相关性状QTL定位的研究进展,探讨了其中存在的问题及未来研究的趋势。     

Association of isozyme genotypes with agronomic and seed composition traits in soybean

Summary Two crosses between Glycine max (L.) Merr. and G. soja Sieb. & Zucc. parents were used to study the association between isozyme marker loci and agronomic and seed composition traits in soybean. The parents possessed different alleles at six isozyme loci for Cross 1 (A80-244036 × PI 326581) and at eight isozyme loci for Cross 2 (A81-157007 × PI 342618A). A total of 480 BC₂F_4:6 lines from the two crosses was evaluated for 13 traits in two environments. Lines were grouped in locus classes from 0 to 5 according to the number of loci homozygous for the G. soja alleles that they possessed. Within each locus class, each isozyme genotype was represented by five random lines.Selection for G. max alleles at the isozyme loci was not effective in recovering the recurrent parent phenotype in either cross. In cross 1, however, BC₂F₄-derived lines in the 0- or 1- locus class more closely resembled the G. max parent than lines in the 4- or 5- locus classes for most of the agronomic and seed composition traits evaluated. Significant associations were found between particular isozyme genotypes and every trait analyzed. The estimated effect of genes linked to the Pgm1 locus was a delay in maturity of 6.0±3.4 days. In cross 1, the Idh2 locus was associated with a significant effect on linolenic acid content. The percentage of variation accounted for by the models of estimation varied according to the heritability of the trait. The R² was high (up to 78%) for maturity, lodging, and vining, and low (up to 21%) for seed yield. Most of the variation was associated with the BC₂F₁ family from which the lines were derived. There was little evidence that digenic epistasis was an important source of variation.Journal Paper No. J-13505 of the Iowa Agric. Home Econ. Exp. Stn., Ames, IA, Project 2475.