Application of Mixed Programming by MATLAB and VC in System Simulation

After discussing the interface between MATLAB and VC++,the method of connecting MATCOM with the m-files,the usage and skills of MATCOM are introduced.Taking single-freedom vibration system as the object,through analyzing the vibration model with damping,the simulation algorithm is programmed.The simulation results show that the system simulation efficiency has been improved.     

Analysis on starting characteristic of continuously variable transmission system with reflux power

Considering on the characteristics of the transmission system and some key units of continuously variable transmission system with reflux power, a dynamic simulation model and a control strategy are established. The design method of the new continuously variable transmission system is verified by simulation. The simulation result on this continuously variable transmission system shows that the rotating speed of the driven plate can rise up rapidly during starting clutch engagement, and the sliding friction power is lower than 3 kJ which is nearly equal to one third of the friction power of the traditional vehicle.     

Transient stability simulation methods incorporating PMU measurements

Incorporating the PMU measurements information in transient stability simulation can increase computing speed and enhance accuracy in the time domain simulation. Based on the conventional alternating iteration technique, this paper presents two simulation methods combined with the PMU measurements information, in which the number of differential algebraic equations is reduced and so is the computational scale. The proposed methods have been tested and compared with the conventional method using the New England 10 machine 39 bus system and IEEE 50 machine 145 bus system. The cases with errors of the dynamic model parameter and PMU have been also simulated and discussed. The simulation results demonstrate the effectiveness of the presented methods.     

Simulation optimization for input plan of multi type and batch production with flexible process

Aiming at multi type and batch production system with flexible process, an optimization method for input plan based on Witness simulation is proposed. The scientific problem researched is described. Aiming at the characteristics of multi type and batch production with flexible process, the simulation logic is designed. Taking Witness as simulation platform, the simulation model combining input plan with scheduling for multi type and batch production is constructed. The effectiveness of the method is tested by simulation examination.     

Parameterized Design System of Motorcycle Based on Adams Virtual Prototyping Technology

This paper uses motorcycle as the research object and uses ADAMS/View as tools to deal with the inconvenience of constructing Motorcycle simulation model in ADAMS/View.The parameterized design system of Motorcycle is developed according to the requirements of simulation model by using ADAMS/View secondary development technology.The system has solved very complicated problem of motorcycle modeling in ADAMS/View,whose spatial structure is very complicated,and solved the problem of model imported by other CAD software which has information lose,model scale tends to heavy,follow-up simulation difficult and so on.The system is used to make the simulation model in ADAMS/View easier for follow-up simulation according to the basic dimension of Motorcycle and user's needs,and shorten the development period of the motorcycle,reduce the development cost,and carry on the series design.     

Handling performace evaluation of a vehicle stability control system based on a driver model

By combining a driver model, a vehicle system dynamics model, and a vehicle lateral stability control system, the performance of the driver vehicle road closed loop system through a pylon course slalom test was simulated. The simulation was done in accordance with the GB/T6323.1-94 standard. Vehicle stability control system effectiveness was evaluated by measuring the mean maximum yaw rate and the mean maximum steering wheel angle. The simulation results showed the slalom test value with lateral stability control was approximately 4% higher than without a stability control system. This indicates the controlling system improves vehicle handling stability.     

Electric Vehicle of Direct Torque Control System Based on TMS320LF2407 Controller

A fully digitized electric vehicle direct torque control system with DSPTMS320LF2407 controller is described. The system hardware and software structures are presented. The performance of the direct torque control system is studied by simulation with MATLAB. Based on the simulation of the induction motor, waveform of current, speed, torque and flux are obtained. The testing results are also presented. Experimental results show that the design is feasible.     

Power Flow Analysis of System with UPFC

This paper first analyzes the working mechanism of the UPFC,and a practical method of power flow simulation is presented.The method can bring controlling of UPFC to accord with power flow simulation in the best,and can calculate the power flow with several UPFC.IEEE 5 nodes system and IEEE 30 nodes system are tested.     

Innovation Practices of Virtual Simulation Teaching Method in Landscape Architecture Majors

Based on foreign and domestic literature about teaching theories and simulation application,advantages and disadvantages of simulation teaching and other teaching methods were compared,organization forms and efficiency of simulation teaching in network environment discussed,students' learning patterns and styles summarized,and the theoretical research foundation for the simulation teaching and students' learning system in network environment established.Common problems of simulation teaching and corresponding students' learning styles were discussed,application and supervision system of simulation teaching established,students' learning styles innovated.Views and innovations of virtual simulation teaching in simulation teaching of landscape architecture were given,and the research framework sorted out as reference.     

The Three-Valued PMC Model Computer System Diagnosis Implemented by Artificial Neural Network

This paper systematically studied how to construct a neural network to realize the three-valued computer system diagnosis problems. Through a lot of simulation it seems effective to solve the computer system diagnosis problems with the help of network. Meanwhile the simulation also reveals the relations among capacity C, resistance R , gain Kand time.     

温室蝴蝶兰生长动态模型设计与实现

为了对温室蝴蝶兰生育过程的基本规律和量化关系有一个清楚的理解和认识,并对其生长系统的动态行为进行预测,从而辅助进行对蝴蝶兰生长和生产系统的适时合理调控,研究建立了以太阳辐射为基本驱动因子的温室蝴蝶兰生长发育动态模型,进一步开发出基于WindowsXP的计算机模拟系统。模型系统采用C++ Builder6.0语言编程技术,主要包括太阳辐射、碳同化、干物质分配等重要模块,可以输出干物质积累量、光合作用率、叶面积指数、叶片数与花朵数等参数变量,具有较完善的功能,模拟系统在界面和功能上能够达到较好的统一。对山东省济宁市农业高技术园区温室内蝴蝶兰进行模拟检验分析表明,模拟结果与实测结果符合较好,模型系统可以动态预测蝴蝶兰光合产物积累量等重要变量指标,研究认为该模型系统是研究蝴蝶兰生长发育特性及优化管理的重要工具。     

Simulation of High Pressure Startu Poil Pum Pof Turbine

Dynamic mathematical model, which is based on the character of the 200 MW tubine lbricating oil system, is established by means of modularization. On the basis of dynamic mathematical models, simulation model of the startu Pprocess of hign pressure startu Poil pum Pis created with the Visual Fortran language. The validity of this model has been verified by the simulation experiments and analysis. The simulation helps to forecast the dynamic characteristic to high pressure startu Poil pum Pand have some directive significance to design method of lubricating oil system.     

Design of Simulation System for Logistics in Steel-making Process

A simulation system for logistics in steel-making process has been developed by analyzing the state of logistics in steel plant, integrating the approach of coloured Petri nets with time and queuing network and using object-oriented methodology. The software functions for building-up simulation model, executing simulation, managing simulations, playing demo, analyzing statistics and online help. The objectives and principles of the simulation software have schematically been introduced. At last, the software is visually validated with measured input data of primary logistics in Vanadium-extracting, Steel-making Plant of Panzhihua Iron and Steel Corporation. A Gantt diagram and statistics of simulation case are included in simulation results and can be used to assist decision-making for scheduling in steel-making process.     

Simulation for Logistics in Steel-making Process of Panzhihua Iron and Steel Corporation

To solve potential scheduling problems in production after renewal of continuous casting process in Vanadium-extracting and Steel-making Plant of Panzhihua Iron and Steel Corporation (PISCO), how to model and simulate logistics system in steel-making processhas been discussed. A series of simulatingtests for logistics system in steel-making processhave been conducted based on inputs of presentsteel-making processof PISCO. In the tests, cases of regular schedule case and cases with repairing converter have also been regarded as essential simulation condition. It has been shown that three casters can not start at same time in order to ensure continuous hot metal supply for casters when three kinds of steel are made. It has also been shown that the simulation system for logistics system in steel-making processis valid and can be used for simulating logisticsin upcoming 100% continuous casting process of PISCO. The better schedule scheme of production and reasonable match of converter-caster in time and capacity can be achieved with the help of using simulation approach.     

RANDOM SIMULATION OF THE PRODUCTION SYSTEM OF A MINE

The production-transportation system in a mine is analysed with the principle of system analysis in this paper and the working process of this system is simulated with the technology of random simulation in a computer. Finally, the optimal projects of designing and administering are put forward.     

Modeling and Simulation for 440 t/h CFB Boiler Steam/Water System

Dynamic mathematical model,which is based on the character of power-plant boiler system,is established by the means of modularization. On the basis of dynamic mathematical models,simulation model of the object is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.The simulation model helps to evaluate the influences that the dynamic process in steam/water's side brings to the boiler's operation and have some directive significance to design method of boiler and optimize run.     

Analysis on the Cuplock Template Support System with Semi-Rigid Connettion

The Cuplock Template supports system joint initial rigidity and bowl buckle tightening torque was closely linked, with MATLAB applications for the two order and three order numerical fitting between them, found that three order fitting accuracy was higher than two order fitting results. Using ANSYS finite element software to establish the corresponding with the entity model, the changes in simulated nodes hinged, rigid and different initial stiffness condition for supporting system, and the simulation results were compared with the actual bearing capacity of the frame body stability. Find node is hinged and rigid connection simulation results state and actual frame difference. When the simulation results between node tightening torque of the 35N.m~50N.m and the actual time the frame carrying capacity is close, the node for the semi-rigid connection state. In order to show that the semi-rigid joint model can simulate accurately with the actual capacity of the Cuplock Template supports system.     

Application of Object-oriented FEM in Developing Simulation Software System

Based on object-oriented method, the classes of object-oriented finite element are defined. The finite element program of static, dynamic characteristics and stability analyses for spatial frame structures is developed with c++ object_oriented language which is successfully incorporated into a computer simulation system of derricks. The results of static, dynamic characteristics and stability analysis for the derricks of F320-A and JJ250/42-K types, obtained with the developed system, are consistent with those obtained by a commercial software, which illustrates the correctness of object-oriented FEM and the reliability of the simulation software.     

Simnlation Research on multi-function track beam Production cine

Aiming at shortening new product lead time,diagnosing the bottlenecks,improving equipment efficiency of multi-function track beam production line(MTBL) in iron&steel companies,the characteristics of MTBL,which is different from the traditional discrete or process manufacturing production,is analyzed.Based on characteristics research,the Petri network model of MTBL and the Component-based simulation models of rolling mills constructed,and then MTBL simulation system is developed.Tthe validity and practicability of simulation system are well verified by a case study in a iron&steel company.     

Chaos Synchronization of Continuous Systems for Different Systems Parameters

Because parameter disturbed exist every practical system,so chaos synchronization for different system parameters is availabe. Chaos synchronization of continuous system for different system parameters is studied with the relation between chaotic synchronization and asymptotic stability, parameter adaptive and driving feedback. Lorenz system is used to verify the effectivenss of the proposed method,and the simulation results confirm it.